Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Survey Model”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

Preliminary Measurements on the BOLT Geometry in the Supersonic Low Disturbance Tunnel

Experiments were performed in the Mach 3.5 Supersonic Low Disturbance Tunnel on the BOundary-Layer Transition (BOLT) geometry. The goal of this campaign was to assess changes to the transition front by varying the freestream noise and the model surface quality. The model was printed of polycarbonate and is 30% scale of the flight geometry. It was tested under noisy and quiet conditions at different streamwise positions in the tunnel and was also tested before and after improvements were made to the model surface through sanding and gap reduction. Pitch and yaw angles were nominally zero. The model surface temperature was measured using infrared thermography and thermocouples as the unit Reynolds number was swept from 4.75 – 15.8 × 10 6 m −1 . Boundary-layer transition was observed near the midspan of the model for unit Reynolds numbers above 10×10 6 m −1 in quiet flow, while transition was already observed on the shoulders below 5×10 6 m −1 in noisy flow. The model surface enhancements improved the symmetry of the transition front for quiet flow but made only slight differences for noisy flow. In quiet flow, the impact of streamwise positioning on transition was more significant on the model shoulders compared to the central region. The difference in the shoulder heating was likely due to variation in noise radiated from the nozzle sidewalls. The total temperature and initial wall temperatures were near 300 K and 293 K, respectively, which generally resulted in negative convective heat-flux values into the model. Hot-wire anemometry was also utilized to characterize the freestream and to conduct a planar survey near the base of the model for the 7.92 × 10 6 m −1 quiet condition. The survey captured the thickening of the boundary layer at the centerline and the vortical nature of the flow outboard of it. Spectral analysis of the mass-flux fluctuations near the midspan demonstrates that the boundary layer is laminar and suggests that the thick boundary layer caused the relatively warm centerline observed in the infrared images.

boundary layer transition↗
DOE OSTI2023

System modeling for grid-interactive efficient building applications

Despite the abundance of research applications of system modeling in grid-interactive efficient buildings (GEBs), the transfer of those applications to real-world practices is still in its early stages. This is partially due to the lack of a summary on how system modeling should be established for a given application of GEBs. Here, we fill this gap by providing an extensive survey of the literature on system modeling for different GEBs that have been produced in the past decade. This survey involves over 300 relevant journal articles from the building community, the power system community, and the society of control. Specifically, we first identified key requirements of system modeling for GEBs based on various types of applications discussed in those publications. We then summarized the system modeling applications from those publications, in terms of their assumptions, modeling approach, and simulation. After that, we analyzed different assumptions made for various applications, the extent to which those modeling approaches satisfied the key requirements, and how those approaches can be scaled up for large-scale applications, which are quite common in GEBs. In addition, we gave insights on how to use system modeling for different applications in GEBs. At the end, we provided recommended directions for future studies to fully unleash the potentials of system modeling to support GEBs.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
NASA NTRSDate not supplied

Preliminary Measurements on the BOLT Geometry in the Supersonic Low Disturbance Tunnel

Experiments were performed in the Mach 3.5 Supersonic Low Disturbance Tunnel on the BOundary-Layer Transition (BOLT) geometry. The goal of this campaign was to assess changes to the transition front by varying the freestream noise and the model surface quality. The model was printed of polycarbonate and is 30% scale of the flight geometry. It was tested under noisy and quiet conditions at different streamwise positions in the tunnel and was also tested before and after improvements were made to the model surface through sanding and gap reduction. Pitch and yaw angles were nominally zero. The model surface temperature was measured using infrared thermography and thermocouples as the unit Reynolds number was swept from 4.75 -- 15.8 x 10^6 m^{-1}. Boundary-layer transition was observed near the midspan of the model for unit Reynolds numbers above 10 x 10^6 m^{-1} in quiet flow, while transition was already observed on the shoulders below 5 x 10^6 m^{-1} in noisy flow. The model surface enhancements improved the symmetry of the transition front for quiet flow but made only slight differences for noisy flow. In quiet flow, the impact of streamwise positioning on transition was more significant on the model shoulders compared to the central region. The difference in the shoulder heating was likely due to variation in noise radiated from the nozzle sidewalls. The total temperature and initial wall temperatures were near 300 K and 293 K, respectively, which generally resulted in negative convective heat-flux values into the model. Hot-wire anemometry was also utilized to characterize the freestream and to conduct a planar survey near the base of the model for the 7.92 x 10^6 m^{-1} quiet condition. The survey captured the thickening of the boundary layer at the centerline and the vortical nature of the flow outboard of it. Spectral analysis of the mass-flux fluctuations near the midspan demonstrates that the boundary layer is laminar and suggests that the thick boundary layer caused the relatively warm centerline observed in the infrared images.

boundary layer transition↗
NASA NTRS1994

Transient analysis mode participation for modal survey target mode selection using MSC/NASTRAN DMAP

Many methods have been developed to aid analysts in identifying component modes which contribute significantly to component responses. These modes, typically targeted for dynamic model correlation via a modal survey, are known as target modes. Most methods used to identify target modes are based on component global dynamic behavior. It is sometimes unclear if these methods identify all modes contributing to responses important to the analyst. These responses are usually those in areas of hardware design concerns. One method used to check the completeness of target mode sets and identify modes contributing significantly to important component responses is mode participation. With this method, the participation of component modes in dynamic responses is quantified. Those modes which have high participation are likely modal survey target modes. Mode participation is most beneficial when it is used with responses from analyses simulating actual flight events. For spacecraft, these responses are generated via a structural dynamic coupled loads analysis. Using MSC/NASTRAN DMAP, a method has been developed for calculating mode participation based on transient coupled loads analysis results. The algorithm has been implemented to be compatible with an existing coupled loads methodology and has been used successfully to develop a set of modal survey target modes.

Barnett, Alan R.↗
DOE OSTI2026

Probabilistic Inference of Low-Surface-Brightness Galaxy Morphological Parameters Using Simulation-Based Inference

Low-surface-brightness galaxies (LSBGs) are diffuse, often dark-matter-dominated systems whose faintness makes their structural parameters difficult to measure reliably in wide-field imaging surveys. Robust parameter inference, including uncertainty quantification, is important for population studies and for comparisons with models of galaxy formation, as future surveys are expected to produce increasingly large samples of diffuse galaxies. In practice, LSBG profile modeling is sensitive to sky- background errors, masking choices, contaminating background sources, and the computational cost of obtaining posterior-level uncertainties for large samples. Motivated by these questions, we develop a simulation-based inference (SBI) framework for estimating posterior distributions of LSBG morphological parameters from simulated galaxy images. Using PyImfit, we generate DES-like single-Sersic profile LSBG images with known position angle, ellipticity, Sersic index, effective surface brightness, and effective radius. We then train a normalizing-flow-based neural posterior estimator using the sbi package to infer these parameters from the simulated images. For isolated simulated galaxies, the SBI posterior recovers the true input parameters, produces posterior predictive residuals consistent with the assumed noise model, and shows good empirical calibration in a DES-motivated test regime. We also compare SBI with PyImfit-based MCMC inference and find broadly comparable posterior constraints, while SBI enables substantially faster posterior sampling after training. Finally, we test robustness to compact background contaminants. A model trained only on isolated galaxies produces undercovered posteriors on contaminated images, whereas training on simulations with variable contaminant positions and fluxes improves calibration across contaminated test sets. These results demonstrate the promise of SBI for scalable, uncertainty-aware LSBG morphology inference, while emphasizing that posterior reliability strongly depends on whether training simulations include relevant observational complications.

Batbayar, Bilguun [U. Chicago (main)]↗
NASA NTRS1990

Rate dependent constitutive models for fiber reinforced polymer composites

A literature survey was conducted to assess the state-of-the-art in rate dependent constitutive models for continuous fiber reinforced polymer matrix composite (PMC) materials. Several recent models which include formulations for describing plasticity, viscoelasticity, viscoplasticity, and rate-dependent phenomenon such as creep and stress relaxation are outlined and compared. When appropriate, these comparisons include brief descriptions of the mathematical formulations, the test procedures required for generating material constants, and details of available data comparing test results to analytical predictions.

Gates, Thomas S.↗
NASA NTRS2019

The SkyView Data Model: Handling Heterogeneous Data Using Dynamic Software

The SkyView Virtual Telescope allows users to query over 75 distinct datasets of astronomical imagery including more than 190 distinct surveys. These holdings are extraordinarily diverse ranging over more than 15 orders of magnitude in frequency and5 orders of magnitude in resolution. To accommodate supporting these data, SkyView has developed a simple data model for surveys. Nor surprisingly, given the diverse origins of the datasets included, some surveys do not easily fit within this model. The conventional approach to dealing with such outliers is to build a layer on top of the actual data which more faithfully adheres to the data model. With SkyView we have used a somewhat alternative approach. We allow the data model to define new behaviors in the SkyView code itself either by customizing the use of existing capabilities or pointing to new classes that have non-standard behavior. This approach is feasible since in modern computer languages the code that is run can be selected dynamically with new classes completely overriding traditional behavior. This paper describes this approach and considers how it may become more useful as our software structures become increasingly dynamically linked.

Thomas McGlynn↗
DOE OSTI2025

HOD-dependent systematics in Emission Line Galaxies for the DESI 2024 BAO analysis

The Dark Energy Spectroscopic Instrument (DESI) will provide precise measurements of Baryon Acoustic Oscillations (BAO) to constrain the expansion history of the Universe and set stringent constraints on dark energy. Therefore, precise control of the global error budget due to various systematic effects is required for the DESI 2024 BAO analysis. In this work, we estimate the level of systematics induced in the DESI BAO analysis due the assumed Halo Occupation Distribution (HOD) model for the Emission Line Galaxy (ELG) tracer. We make use of mock galaxy catalogs constructed by fitting various HOD models to early DESI data, namely the One-Percent survey data. Our analysis includes typical HOD models for the ELG tracer used in the literature as well as extensions to the baseline models. Among the extensions, we consider various recipes for galactic conformity and assembly bias. We use 25 AbacusSummit simulations under the ΛCDM cosmology for each HOD model and perform independent analyses in Fourier space and in configuration space. To recover the BAO signal from our mocks we perform BAO reconstruction and apply the control variates technique to reduce sample variance noise. Our BAO analyses can recover the isotropic BAO parameter α iso within 0.1% and the Alcock Paczynski parameter α AP within 0.3%. Overall, we find that the systematic error due to the HOD dependence is below 0.17%, with the Fourier space analysis being more robust against the HOD systematics. We conclude that our analysis pipeline is robust enough against the HOD systematics for the ELG tracer in the DESI 2024 BAO analysis, for the assumptions made.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2020

A Survey of Constrained Gaussian Process: Approaches and Implementation Challenges

Gaussian process regression is a popular Bayesian framework for surrogate modeling of expensive data sources. As part of a larger effort in scientific machine learning, many recent works have incorporated physical constraints or other a priori information within Gaussian process regression to supplement limited data and regularize the behavior of the model. We provide an overview and survey of several classes of Gaussian process constraints, including positivity or bound constraints, monotonicity and convexity constraints, differential equation constraints provided by linear PDEs, and boundary condition constraints. We compare the strategies behind each approach as well as the differences in implementation, concluding with a discussion of the computational challenges introduced by constraints.

97 MATHEMATICS AND COMPUTING↗
NASA NTRS1974

The application of sensitivity analysis to models of large scale physiological systems

A survey of the literature of sensitivity analysis as it applies to biological systems is reported as well as a brief development of sensitivity theory. A simple population model and a more complex thermoregulatory model illustrate the investigatory techniques and interpretation of parameter sensitivity analysis. The role of sensitivity analysis in validating and verifying models, and in identifying relative parameter influence in estimating errors in model behavior due to uncertainty in input data is presented. This analysis is valuable to the simulationist and the experimentalist in allocating resources for data collection. A method for reducing highly complex, nonlinear models to simple linear algebraic models that could be useful for making rapid, first order calculations of system behavior is presented.

Leonard, J. I.↗
DOE OSTI2023

The DESI PRObabilistic Value-added Bright Galaxy Survey (PROVABGS) Mock Challenge

The PRObabilistic Value-added Bright Galaxy Survey (PROVABGS) catalog will provide measurements of galaxy properties, such as stellar mass ($M*$), star formation rate (SFR), stellar metallicity (Z), and stellar age ($t_{age}$), for >10 million galaxies of the Dark Energy Spectroscopic Instrument (DESI) Bright Galaxy Survey. Full posterior distributions of the galaxy properties will be inferred using state-of-the-art Bayesian spectral energy distribution (SED) modeling of DESI spectroscopy and Legacy Surveys photometry. In this work, we present the SED model, the neural emulator for the model, and the Bayesian inference framework of PROVABGS. Furthermore, we apply the PROVABGS SED modeling on realistic synthetic DESI spectra and photometry, constructed using the L-Galaxies semi-analytic model. We compare the inferred galaxy properties to the true values of the simulation using a hierarchical Bayesian framework to quantify accuracy and precision. Overall, we accurately infer the true $M*$, SFR, Z, and $t_{age}$ of the simulated galaxies. However, the priors on galaxy properties induced by the SED model have a significant impact on the posteriors, which we characterize in detail. This work also demonstrates that a joint analysis of spectra and photometry significantly improves the constraints on galaxy properties over photometry alone and is necessary to mitigate the impact of the priors. With the methodology presented and validated in this work, PROVABGS will maximize information extracted from DESI observations and extend current galaxy studies to new regimes and unlock cutting-edge probabilistic analyses. https://github.com/changhoonhahn/provabgs/

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

DeepShadows: Separating low surface brightness galaxies from artifacts using deep learning

Searches for low-surface-brightness galaxies (LSBGs) in galaxy surveys are plagued by the presence of a large number of artifacts (e.g., objects blended in the diffuse light from stars and galaxies, Galactic cirrus, star-forming regions in the arms of spiral galaxies, etc.) that have to be rejected through time consuming visual inspection. In future surveys, which are expected to collect hundreds of petabytes of data and detect billions of objects, such an approach will not be feasible. We investigate the use of convolutional neural networks (CNNs) for the problem of separating LSBGs from artifacts in survey images. We take advantage of the fact that we have available a large number of labeled LSBGs and artifacts from the Dark Energy Survey, that we use to train, validate, and test a CNN model. That model, which we call DeepShadows , achieves a test accuracy of 92.0%, a significant improvement relative to feature-based machine learning models. We also study the ability to use transfer learning to adapt this model to classify objects from the deeper Hyper-Suprime-Cam survey, and we show that after the model is retrained on a very small sample from the new survey, it can reach an accuracy of 87.6%. Finally, these results demonstrate that CNNs offer a very promising path in the quest to study the low-surface-brightness universe.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2021

The APOGEE Library of Infrared SSP Templates (A-LIST): High-resolution Simple Stellar Population Spectral Models in the H Band

Integrated light spectroscopy from galaxies can be used to study the stellar populations that cannot be resolved into individual stars. This analysis relies on stellar population synthesis (SPS) techniques to study the formation history and structure of galaxies. However, the spectral templates available for SPS are limited, especially in the near-infrared (near-IR). We present A-LIST (APOGEE Library of Infrared SSP Templates), a new set of high-resolution, near-IR SSP spectral templates spanning a wide range of ages (2–12 Gyr), metallicities ( − 2.2 < [M/H] < + 0.4) and α abundances ( − 0.2 < [α/M] < + 0.4). This set of SSP templates is the highest resolution (R ∼ 22, 500) available in the near-IR, and the first such based on an empirical stellar library. Our models are generated using spectra of ∼300,000 stars spread across the Milky Way, with a wide range of metallicities and abundances, from the APOGEE survey. We show that our model spectra provide accurate fits to M31 globular cluster spectra taken with APOGEE, with best-fit metallicities agreeing with those of previous estimates to within ∼0.1 dex. We also compare these model spectra to lower-resolution E-MILES models and demonstrate that we recover the ages of these models to within ∼1.5 Gyr. This library is available in https://github.com/aishashok/ALIST-library.

47 OTHER INSTRUMENTATION↗
NASA NTRS2004

A Behavioral Model of Landscape Change in the Amazon Basin: The Colonist Case

This paper presents the prototype of a predictive model capable of describing both magnitudes of deforestation and its spatial articulation into patterns of forest fragmentation. In a departure from other landscape models, it establishes an explicit behavioral foundation for algorithm development, predicated on notions of the peasant economy and on household production theory. It takes a 'bottom-up' approach, generating the process of land-cover change occurring at lot level together with the geography of a transportation system to describe regional landscape change. In other words, it translates the decentralized decisions of individual households into a collective, spatial impact. In so doing, the model unites the richness of survey research on farm households with the analytical rigor of spatial analysis enabled by geographic information systems (GIs). The paper describes earlier efforts at spatial modeling, provides a critique of the so-called spatially explicit model, and elaborates a behavioral foundation by considering farm practices of colonists in the Amazon basin. It then uses, insight from the behavioral statement to motivate a GIs-based model architecture. The model is implemented for a long-standing colonization frontier in the eastern sector of the basin, along the Trans-Amazon Highway in the State of Para, Brazil. Results are subjected to both sensitivity analysis and error assessment, and suggestions are made about how the model could be improved.

Walker, R. A.↗
NASA NTRS1987

Mass modeling for bars

Methods of modeling mass for bars are surveyed. A method for extending John Archer's concept of consistent mass beyond just translational inertia effects is included. Recommendations are given for various types of modeling situations.

Butler, Thomas G.↗
NASA NTRS2005

Martian Atmospheric Circulation and Climate

This project was submitted with four work tasks. The reviews recommended focusing on the following three, with an appropriately reduced budget: 1. In the first, we proposed to use Thermal Emission Spectrometer (TES) data to examine the general circulation of the atmosphere and to better constrain and validate a Mars General Circulation Model (GCM). 2. In the second, we proposed to examine processes responsible for the injection of dust into the atmosphere. We will conduct a global, seasonal survey of dust lifting events, and specifically of dust devil activity, using MGS MOC, MGS TES, and Odyssey THEMIS data. The results of this survey will be compared with model predictions of dust devil and other dust lifting processes. It is expected that some of the observational results will motivate specific simulations with the GCM and mesoscale models. 3. In the third task, we proposed to extract seasonal and spatial near-surface wind information from aeolian streaks. Detailed analysis will focus on streaks in the polar regions and in regions of large topography (such as Tharsis). The streak information will be used along with the mesoscale model to examine the processes that control local and regional scale flow patterns.

Richardson, Mark I.↗
DOE OSTI2022

Manning condensation in ion exchange membranes: A review on ion partitioning and diffusion models

Here, the rational design of ion exchange membranes (IEMs) is becoming more pertinent as their usage becomes broader and as their staple applications (i.e., electrodialysis, flow batteries, and fuel cells) improve in commercial viability. Such efforts would be catalyzed by an improved fundamental understanding of ion transport in IEMs. This review discusses recent progress in modeling ion partitioning and diffusion in IEMs in an effort to relate IEM performance metrics to fundamental membrane properties over which researchers and membrane manufacturers possess direct and sometimes precise control. Central focus is given to the Donnan-Manning model for ion partitioning and the Manning-Meares model for ion diffusion in IEMs. These two frameworks, which are derived from Manning's counter-ion condensation theory for polyelectrolyte solutions, have been widely used within the IEM literature since their recent introduction. To explore this topic, the mathematical derivation of both models is revisited, followed by a survey of experimental and computational discussions of counter-ion condensation in IEMs. Alternative models which fulfill similar roles in predicting IEM transport properties are compared. This review concludes by highlighting the uniquely favorable positions of the Donnan-Manning and Manning-Meares models and discussing their prospects as leading predictors of IEM partitioning and diffusive properties.

25 ENERGY STORAGE↗
NASA NTRS1973

A study of zodiacal light models

A review is presented of the basic equations used in the analysis of photometric observations of zodiacal light. A survey of the methods used to model the zodiacal light in and out of the ecliptic is given. Results and comparison of various models are presented, as well as recent results by the authors.

Gary, G. A.↗