Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Structural variation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Measurement of Vortex Strength and Core Diameter in the Wake of a Hovering Rotor

Detailed hot wire measurements have been acquired in the tip vortex of a three-bladed model tilt rotor in hover. Testing was conducted at a rotor tip speed of 752 ft/sec, a Reynolds number (based on blade tip chord) of 1.77 x 10(exp 6), for thrust coefficients up to 0.0160. A figure shows the hot wire mounted above the inverted rotor at the Outside Aerodynamic Rotor Facility (OARF) at NASA Ames Research Center. Strobed shadowgraph flow visualization was used to define the vortex trajectory as an aid in hot wire positioning. Considerable variations in tip vortex structure with time were observed, even from the same blade, under essentially uniform test conditions. The only velocity signatures analyzed were those corresponding to passage of the probe directly through the center of the vortex. These time histories were ensemble averaged after compensating for jitter in the vortex arrival time at the probe, thereby retaining the core structure with minimal smearing. An example of a mean velocity signature, after ensemble averaging, is shown. The mean velocity signature was analyzed under the assumption of constant (unknown) translation speed of the vortex filament past the fixed probe. The translation speed of the vortex is deduced and the vortex strength and core diameter inferred. The results were highly unexpected. The indicated vortex strength is seen to decrease rapidly after first blade passage. In addition, the core radius is seen to decrease with increasing wake age, not increase as might be expected from simple diffusion.

Wadcock, Alan J.↗

Multiscale Computer Simulation of Failure in Aerogels

Aerogels have been of interest to the aerospace community primarily for their thermal properties, notably their low thermal conductivities. While such gels are typically fragile, recent advances in the application of conformal polymer layers to these gels has made them potentially useful as lightweight structural materials as well. We have previously performed computer simulations of aerogel thermal conductivity and tensile and compressive failure, with results that are in qualitative, and sometimes quantitative, agreement with experiment. However, recent experiments in our laboratory suggest that gels having similar densities may exhibit substantially different properties. In this work, we extend our original diffusion limited cluster aggregation (DLCA) model for gel structure to incorporate additional variation in DLCA simulation parameters, with the aim of producing DLCA clusters of similar densities that nevertheless have different fractal dimension and secondary particle coordination. We perform particle statics simulations of gel strain on these clusters, and consider the effects of differing DLCA simulation conditions, and the resultant differences in fractal dimension and coordination, on gel strain properties.

Good, Brian S.↗

Capabilities and Limitations of Space-Borne Passive Remote Sensing of Dust

Atmospheric dust particles have significant effects on the climate and the environment and despite notable recent advances in modeling and observation, wind-blown dust radiative effects remain poorly quantified in both magnitude and sign [IPCC, 2001]. To address this issue, many scientists are using passive satellite observations to study dust properties and to constrain emission/transport models, because the information provided is both time-resolved and global in coverage. In order to assess the effects of individual dust outbreaks on atmospheric radiation and circulation, relatively high temporal resolution (of the order of hours or days) is required in the observational data. Data should also be available over large geographical areas, as dust clouds may cover hundreds of thousands of square kilometers and will exhibit significant spatial variation in their vertical structure, composition and optical properties, both between and within dust events. Spatial and temporal data continuity is necessary if the large-scale impact of dust loading on climate over periods ranging from hours to months is to be assessed.

Kalashnikova, Olga↗

Prominence Mass Supply and the Cavity

A prevalent but untested paradigm is often used to describe the prominence-cavity system; the cavity is under-dense because it it evacuated by supplying mass to the condensed prominence. The thermal non-equilibrium (TNE) model of prominence formation offers a theoretical framework to predict the thermodynamic evolutin of the prominence and the surrounding corona. We examine the evidence for a prominence-cavity connection by comparing the TNE model and diagnostics of dynamic extreme ultraviolet (EUV) emission surrounding the prominence, specifically prominence horns. Horns are correlated extensions of prminence plasma and coronal plasma which appear to connect the prominence and cavity. The TNE model predicts that large-scale brightenings will occur in the Solar Dynamics Observatory Atmospheric Imaging Assembly 171 A badpass near he prominence that are associated with the cooling phase of condensation formation. In our simulations, variations in the magnitude of footpoint heating lead to variations in the duration, spatial scale, and temporal offset between emission enhancements in the other EUV bandpasses. While these predictions match well a subset of the horn observations, the range of variations in the observed structures is not captured by the model. We discuss the implications of one-dimensional loop simulations for the three-dimensional time-averaged equilibrium in the prominence and the cavity. Evidence suggests that horns are likely caused by condensing prominence plasma, but the larger question of whether this process produces a density-depleted cavity requires a more tightly constrained model of heating and better knowledge of the associated magnetic structure.

PROMINENCES↗

A TEM Investigation of the Fine-Grained Matrix of the Martian Basaltic Breccia NWA 7034

The martian basaltic breccia NWA 7034 is characterized by fine-grained groundmass containing several different types of mineral grains and lithologic clasts. The matrix composition closely resembles Martian crustal rock and soil composition measured by recent rover and orbiter missions. The first results of NWA 7034 suggest that the brecciation of this martian meteorite may have formed due to eruptive volcanic processes; however, impact related brecciation processes have been proposed for paired meteorites NWA 7533 and NWA 7475]. Due to the very fine grain size of matrix, its textural details are difficult to resolve by optical and microprobe observations. In order to examine the potential nature of brecciation, transmission electron microscopy (TEM) studies combined with focused ion-beam technique (FIB) has been undertaken. Here we present the preliminary observations of fine-grained groundmass of NWA 7034 from different matrix areas by describing its textural and mineralogical variations and micro-structural characteristics.

Muttik, N.↗

The Atacama Cosmology Telescope: Cosmological Parameters from Three Seasons of Data

We present constraints on cosmological and astrophysical parameters from highresolution microwave background maps at 148 GHz and 218 GHz made by the Atacama Cosmology Telescope (ACT) in three seasons of observations from 2008 to 2010. A model of primary cosmological and secondary foreground parameters is fit to the map power spectra and lensing deflection power spectrum, including contributions from both the thermal Sunyaev-Zeldovich (tSZ) effect and the kinematic Sunyaev-Zeldovich (kSZ) effect, Poisson and correlated anisotropy from unresolved infrared sources, radio sources, and the correlation between the tSZ effect and infrared sources. The power l(sup 2)C(sub l)/2pi of the thermal SZ power spectrum at 148 GHz is measured to be 3.4 +/- 1.4 micro-K(sup 2) at l = 3000, while the corresponding amplitude of the kinematic SZ power spectrum has a 95% confidence level upper limit of 8.6 micro-K(sup 2). Combining ACT power spectra with the WMAP 7-year temperature and polarization power spectra, we find excellent consistency with the LCDM model. We constrain the number of effective relativistic degrees of freedom in the early universe to be N(sub eff) = 2.79 +/- 0.56, in agreement with the canonical value of N(sub eff) = 3.046 for three massless neutrinos. We constrain the sum of the neutrino masses to be sigma(mν) is less than 0.39 eV at 95% confidence when combining ACT and WMAP 7-year data with BAO and Hubble constant measurements. We constrain the amount of primordial helium to be Y(sub p) = 0.225 +/- 0.034, and measure no variation in the fine structure constant alpha since recombination, with alpha/alpha(sub 0) = 1.004 +/- 0.005. We also find no evidence for any running of the scalar spectral index, derivative(n(sub s))/derivative(ln k) = −0.004 +/- 0.012.

Atacama↗

Holocene Accumulation and Ice Flow near the West Antarctic Ice Sheet Divide Ice Core Site

The West Antarctic Ice Sheet Divide Core (WDC) provided a high-resolution climate record from near the Ross-Amundsen Divide in Central West Antarctica. In addition, radar-detected internal layers in the vicinity of the WDC site have been dated directly from the ice core to provide spatial variations in the age structure of the region. Using these two data sets together, we first infer a high-resolution Holocene accumulation-rate history from 9.2 thousand years of the ice-core timescale and then confirm that this climate history is consistent with internal layers upstream of the core site. Even though the WDC was drilled only 24 kilometers from the modern ice divide, advection of ice from upstream must be taken into account. We evaluate histories of accumulation rate by using a flowband model to generate internal layers that we compare to observed layers. Results show that the centennially averaged accumulation rate was over 20 percent lower than modern at 9.2 thousand years before present (B.P.), increased by 40 percent from 9.2 to 2.3 thousand years B.P., and decreased by at least 10 percent over the past 2 thousand years B.P. to the modern values; these Holocene accumulation-rate changes in Central West Antarctica are larger than changes inferred from East Antarctic ice-core records. Despite significant changes in accumulation rate, throughout the Holocene the regional accumulation pattern has likely remained similar to today, and the ice-divide position has likely remained on average within 5 kilometers of its modern position. Continent-scale ice-sheet models used for reconstructions of West Antarctic ice volume should incorporate this accumulation history.

ice↗

Vertical and Horizontal Heterogeneity of Atmospheric Dust Loading in Northern Gale Crater, Mars

This paper updates the record of atmospheric dust loading within northern Gale Crater, Mars, by providing line-of-sight extinction (LOS-Ext) measurements of the intervening dust between the rover and the crater rim. These measurements are derived from images taken with the Navigation Cameras (Navcam) onboard the Mars Science Laboratory (MSL) rover, Curiosity. The observations span 2.44 Mars years, from Mars Year (MY) 31 at a solar longitude (L(sub s)) of 208° to t L(sub s) = 7° of MY34, sols 100–1701 of the MSL surface mission. This work examines the dataset for seasonal trends of the LOS-Ext in addition to horizontal variations and the vertical structure of LOS-Ext. The LOS-Ext has a repetitive pattern with a single peak in the latter half of the Mars year. The atmosphere in the crater is well mixed horizontally but not vertically as larger LOS-Ext is seen nearer the crater floor than at higher altitudes within the crater. The results allow a discussion on whether or not Gale Crater is a sink for atmospheric dust or a source of atmospheric dust in the current era.

Casey A. Moore↗

Cascading Rupture of a Megathrust

Understanding variability in the size and location of large earthquakes along subduction margins is crucial for evaluating seismic and tsunami hazards. We present a coseismic slip model for the 2021 M8.2 Chignik earthquake and investigate the relationship of this earthquake to previous major events in the Alaska Peninsula region and to interseismic coupling. Stress changes from the 2020 M7.8 Simeonof event triggered the Chignik event, and together, the earthquakes partially filled an unruptured section along a 3000-km subduction margin that has experienced a series of ruptures along almost its entire length over the past century. Variations in coupling and structural characteristics may make the region more prone to nucleating M7 to M8 events rather than larger M > 8.5 earthquakes. Stress changes and rupture areas suggest that the two recent earthquakes may be part of an 80-year-long rupture cascade and may have advanced seismic hazard in the region.

Julie L. Elliott↗

Improved Simulations of Biomass Burning Aerosol Optical Properties and Lifetimes in the NASA GEOS Model during the ORACLES-I Campaign

In order to improve aerosol representation in the NASA Goddard Earth Observing System (GEOS) model, we evaluated simulations of the aerosol properties and transport over the southern African biomass burning source and outflow region using observations made during the first deployment of the ORACLES (ObseRvations of Aerosols above CLouds and their intEractionS) field campaign in September 2016. An example case study of September 24 was analyzed in detail, during which aircraft-based in-situ and remote sensing observations showed the presence of a multi-layered smoke plume structure with significant vertical variation in single scattering albedo (SSA). Our baseline GEOS simulations were not able to represent the observed SSA variation, nor the observed organic aerosol-to-black carbon ratio (OA : BC). Analyzing the simulated smoke age suggests that the higher altitude, less absorbing smoke plume was younger (~4 days), while the lower altitude and more absorbing smoke plume was older (~7 days). We hypothesize a chemical or microphysical loss process exists to explain the change in aerosol absorption as the smoke plume ages, and we apply a simple 6-day e-folding loss rate to the model hydrophilic biomass burning OA to mimic this process. Adding this loss process required some adjustment to the model assumed scaling factors of aerosol emissions to conserve the regional aerosol loading and further improve the simulated OA : BC ratio. Accordingly, we have increased our biomass burning emissions of OA by 60 % and biomass burning BC by 15 %. We also utilized the ORACLES airborne observations to better constrain the simulation of aerosol optical properties, adjusting the assumed particle size, hygroscopic growth, and absorption. Our final GEOS model simulation with additional OA loss and updated optics showed a better performance in simulating AOD and SSA compared to independent ground and space-based retrievals for the entire month of September 2016, including the OMI Aerosol Index. In terms of radiative implications of our model adjustments, the final GEOS simulation suggested a decreased atmospheric warming of about 10 % (~2 W m -2 ) over the south-east Atlantic region and above the stratocumulus cloud decks compared to the model baseline simulations. These results improve the representation of the smoke age, transport, and optical properties in Earth system models.

aerosols↗

Three-dimensional structure of the extended solar magnetic field and the sunspot cycle variation in cosmic ray intensity

A principal cause for the eleven-year sunspot cycle variation in the primary cosmic ray intensity observed at earth may be a variation in the solid angle of the heliosphere occupied by the extended solar polar magnetic field. Galactic cosmic rays have relatively easy access to the inner solar system through the regular extended solar polar fields, and relatively difficult access through the irregular extended solar sector structure fields.

Svalgaard, L.↗

Vibration suppression in flexible structures via the sliding-mode control approach

Sliding mode control became very popular recently because it makes the closed loop system highly insensitive to external disturbances and parameter variations. Sliding algorithms for flexible structures have been used previously, but these were based on finite-dimensional models. An extension of this approach for differential-difference systems is obtained. That makes if possible to apply sliding-mode control algorithms to the variety of nondispersive flexible structures which can be described as differential-difference systems. The main idea of using this technique for dispersive structures is to reduce the order of the controlled part of the system by applying an integral transformation. We can say that transformation 'absorbs' the dispersive properties of the flexible structure as the controlled part becomes dispersive.

Drakunov, S.↗

Interstellar pickup protons at pressure-balanced structures

An improved version is presented of a recent investigation that attempted to measure the presence of interstellar pickup protons in the distant solar wind through their effects on the variations within pressure-balanced structures. The previous study's conclusion that the pickup protons, expected to be correlated with the solar wind density through the charge exchange ionization process, had become smeared in the radial direction is confirmed. It is proposed that quasi-linear diffusion of these energetic particles will produce the spatial uniformity inferred from the observations.

Isenberg, Philip A.↗

Ion and electron temperatures in the SUMMA mirror device by emission spectroscopy

Ion temperatures were obtained in the SUMMA mirror device by observing the Doppler-broadened charge-exchange component of the 667.8and 587.6-nm He lines in He plasma and the H alpha and H beta lines in H2 plasma. The second moment of the line profiles was used as the parameter to determine ion temperature. Corrections for magnetic splitting, fine structure, monochromator slit function, and variation in charge-exchange cross section with energy are derived and included. Even for constant cross section, no magnetic splitting or fine structure, and infinitely narrow slit function, the line profile is not Gaussian, because the excitation results from a change-exchange process. Comparison is made with temperatures from a neutral particle analyzer.-

Patch, R. W.↗

Acceleration of barium ions near 8000 km above an aurora

A barium shaped charge, named Limerick, was released from a rocket launched from Poker Flat Research Range, Alaska, on March 30, 1982, at 1033 UT. The release took place in a small auroral breakup. The jet of ionized barium reached an altitude of 8100 km 14.5 min after release, indicating that there were no parallel electric fields below this altitude. At 8100 km the jet appeared to stop. Analysis shows that the barium at this altitude was effectively removed from the tip. It is concluded that the barium was actually accelerated upward, resulting in a large decrease in the line-of-sight density and hence the optical intensity. The parallel electric potential in the acceleration region must have been greater than 1 kV over an altitude interval of less than 200 km. The acceleration region, although presumably auroral in origin, did not seem to be related to individual auroral structures, but appeared to be a large-scale horizontal structure. The perpendicular electric field below, as deduced from the drift of the barium, was temporally and spatially very uniform and showed no variation related to individual auroral structures passing through.

Stenbaek-Nielsen, H. C.↗

Reliability analysis of composite structures

A probabilistic static stress analysis methodology has been developed to estimate the reliability of a composite structure. Closed form stress analysis methods are the primary analytical tools used in this methodology. These structural mechanics methods are used to identify independent variables whose variations significantly affect the performance of the structure. Once these variables are identified, scatter in their values is evaluated and statistically characterized. The scatter in applied loads and the structural parameters are then fitted to appropriate probabilistic distribution functions. Numerical integration techniques are applied to compute the structural reliability. The predicted reliability accounts for scatter due to variability in material strength, applied load, fabrication and assembly processes. The influence of structural geometry and mode of failure are also considerations in the evaluation. Example problems are given to illustrate various levels of analytical complexity.

Kan, Han-Pin↗

Fractal Variation with Changing Line Length: A Potential Problem for Planetary Lava Flow Identification

Fractals are objects that are generally self similar at all scales. Coastlines, mountains, river systems, planetary orbits and some mathematical objects are all examples of fractals. Bruno et al. used the structured walk model of Richardson to establish that lava flows are fractals and that lava flow morphology could be determined by looking at the fractal dimension of flow margins. They determined that Hawaiian a.a flows have fractal dimensions that range from 1.05 to 1.09 and that the pahoehoe lava flows have a fractal dimension from 1.13 to 1.23. We have analyzed a number of natural and simulated lava flow margins and find that the fractal dimension varies according to the number and length of rod lengths used in the structured walk method. The potential variation we find in our analyses is sufficiently large so that unambiguous determination of lava flow morphology is problematic for some flows. We suggest that the structured walk method can provide meaningful fractal dimensions if rod lengths employed in the analysis provide a best-fit residual of greater than 0.98, as opposed to the 0.95 cutoff used in previous studies. We also find that the use of more than 4 rod lengths per analysis also reduces ambiguity in the results.

Hudson, Richard K.↗

Cross-correlation between the 170 GHz survey map and the COBE differential microwave radiometer first-year maps

This letter describes results of a cross-correlation between the 170 GHz partial-sky survey, made with a 3.8 deg beam balloon-borne instrument, and the COBE DMR 'Fit Technique' reduced galaxy all-sky map with a beam of 7 deg. The strong correlation between the data sets implies that the observed structure is consistent with thermal variations in a 2.7 K emitter. A chi-square analysis applied to the correlation function rules out the assumption that there is no structure in either of the two maps. A second test shows that if the DMR map has structure but the 170 GHz map does not, the probability of obtaining the observed correlation is small. Further analyses support the assumption that both maps have structure and that the 170 GHz-DMR cross-correlation is consistent with the analogous DMR correlation function. Maps containing various combinations of noise and Harrison-Zel'dovich power spectra are simulated and correlated to reinforce the result. The correlation provides compelling evidence that both instruments have observed fluctuations consistent with anisotropies in the cosmic microwave background.

Ganga, Ken↗