Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Splitting”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Splitting tensile strength of shale cores: intact versus fractured and sealed with ureolysis-induced calcium carbonate precipitation (UICP)

Ureolysis-induced calcium carbonate precipitation (UICP) is a biomineral solution where the urease enzyme converts urea and calcium into calcium carbonate. The resulting biomineral can bridge gaps in fractured shale, reduce undesired fluid flow, limit fracture propagation, better store carbon dioxide, and potentially enhance well efficiency. The mechanical properties of shale cores were investigated using a modified Brazilian indirect tensile strength test. An investigation of intact shale using Eagle Ford and Wolfcamp cores was conducted at varying temperatures. Results show no significant difference between shale types (average tensile strength = 6.19 MPa). Eagle Ford displayed higher strength at elevated temperature, but temperature did not influence Wolfcamp. Comparatively, cores with a single, lengthwise heterogeneous fracture were sealed with UICP and further tested for tensile strength. UICP was delivered via a flow-through method which injected 20–30 sequential patterns of ureolytic microorganisms and UICP-promoting fluids into the fracture until permeability reduced by three orders of magnitude or with an immersion method which placed cores treated with guar gum and UICP-promoting fluids into a batch reactor, demonstrating that guar gum is a suitable inclusion and may reduce the number of flow-through injections required. Tensile results for both delivery methods were variable (0.15–8 MPa), and in some cores the biomineralized fracture split apart, possibly due to insufficient sealing and/or heterogeneity in the composite UICP-shale cores. Notably in other cores the biomineralized fracture remained intact, demonstrating more cohesion than the surrounding shale, indicating that UICP may produce a strong seal for subsurface application.

58 GEOSCIENCES↗
DOE OSTI2020

Reduction kinetics of hercynite redox materials for solar thermochemical water splitting

Solar thermochemical water splitting (STWS) using a hercynite redox cycle is a promising technology for producing renewable H 2 . Here, the reduction kinetics of hercynite (FeAl 2 O 4 ) is evaluated using thermogravimetric and XRD analyses. The results indicate that as-prepared hercynite materials undergo reduction via two different reaction mechanisms. The reaction first proceeds by a nucleation and growth mechanism (AE1), followed by a third-order kinetic model (F3). XRD analyses show the occurrence of superstoichiometric oxygen in the spinel structure of FeAl 2 O 4+δ in the second reaction mechanism, which indicates the formation of cationic vacancies. TGA and XRD analyses confirm that hercynite maintains its spinel structure when the materials are thermally reduced and oxidized with steam. Differential scanning calorimetry (DSC) performed on FeAl 2 O 4 particles shows two heats of reaction in agreement with the two observed mechanisms. This is the first kinetics study to report on the thermal reduction of hercynite.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Favorable morphology and electronic conductivity of functional sublayers for highly efficient water splitting electrodes

Low electronic conductivities and improper morphologies of anode electrodes greatly limit the reaction area, catalyst utilization and efficiency in proton exchange membrane water electrolyzers. In this study, conductive sublayers with different conductivities and morphologies were introduced into anode electrodes in membrane-based water electrolyzers. In-situ and ex-situ investigation results showed that conductive sublayers (Au mesh and carbon nanotube (CNT) film) augmented the sheet conductivity of anode electrodes by up to 4000 times (from 2000 to 0.5 ohm square -1 ), and the ohmic resistance of water electrolyzers was reduced to 1/3 when inserting conductive sublayers. In addition, CNT film provided a higher electrochemical active area than Au mesh, because of favorable morphologies (large porosity and surface area) of CNT fibers on CNT films. Therefore, the current density of water splitting was increased by 3 times (from 4.55 mA cm -2 to 14.83 mA cm -2 ) at 2.5 V compared to a conventional anode electrode. Visualizations on bubble dynamics showed improved performances with conductive sublayers; this was mainly due to greatly increased number of reaction sites, highly spread reaction area (from 50 to 1000 um), and reduced activation overpotential. Therefore, a balance between high electronic conductivity and nanoporous morphology is essential to the anode electrode for larger reaction sites and areas in highly efficient water electrolyzers.

25 ENERGY STORAGE↗
DOE OSTI2024

Seismic monitoring of EGS fracture stimulations at Utah FORGE (Part 1): Time-lapse variations of b-values and Shear-wave Splitting Rates of induced microearthquakes

Characterizing geologic formations near geothermal wells is crucial for efficient extraction of subsurface geothermal energy resources. To monitor effective fracture stimulation of enhanced geothermal systems (EGS), we analyze a catalog of induced microearthquakes to characterize seismicity induced by Phase 2C fracture stimulations of the Utah FORGE project and derive the b-values for 424 induced microearthquakes in three stages of fracture stimulation. Here, we find the time-lapse variations of these b-values. We apply eigenvector rotation and waveform correlation to 3C geophone data to separate fast S 1 and slow S 2 waves, determine their directions, measure their lag time, and calculate the S-wave splitting rate (SSR) for six induced microearthquakes in Stage 1 and 21 in Stage 3. Both SSR values and b-values increase with time. The increase in these values may be related to heavily fractured zones created by fracture stimulations during Stage 2 injections. Large and highly variable SSR values in Stage 3 may reflect heterogeneities in the fracture zones. Time-lapse variations of SSR values and b-values may be one of the most useful approaches to monitoring and characterizing the effectiveness and efficiency of various types of fracture stimulations.

58 GEOSCIENCES↗
DOE OSTI2020

High-throughput characterization of Ag–V–O nanostructured thin-film materials libraries for photoelectrochemical solar water splitting

Ag–V–O thin-film materials libraries, with both composition (Ag 22-77 V 23-78 O x ) and thickness (123–714 nm) gradients were fabricated using combinatorial reactive magnetron co-sputtering aiming on establishing relations between composition, structure, and functional properties. As-deposited libraries were annealed in air at 300 °C for 10 h. High-throughput characterization methods of composition, structure and functional properties were used to identify photoelectrochemically active regions. The phases AgV 6 O 15 , Ag 2 V 4 O 11 , AgVO 3 , and Ag 4 V 2 O 7 were observed throughout the composition gradient. The photoelectrochemical properties of Ag–V–O films are dependent on composition and morphology. An enhanced photocurrent density (~300–554 μA/cm 2 ) was obtained at 30 to 45 at.% Ag along the thickness gradient. Thin films of these compositions show a nanowire morphology, which is an important factor for the enhancement of photoelectrochemical performance. The photoelectrochemically active regions were further investigated by high-throughput synchrotron-X-ray diffraction and transmission electron microscopy (Ag 32 V 68 O x ) which confirmed the presence of Ag 2 V 4 O 11 as the dominating phase along with the minor phases AgV 6 O 15 and AgVO 3 . This enhanced photoactive region shows bandgap values of ~2.30 eV for the direct and ~1.87 eV for the indirect bandgap energies. Finally, the porous nanostructured films improve charge transport and are hence of interest for photoelectrochemical water splitting.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Towards chemical equilibrium in thermochemical water splitting. Part 1: Thermal reduction

The efficiency of many processes strongly depends on their thermodynamic reversibility, i.e., proximity to equilibrium throughout the process. In thermochemical cycles for water and/or carbon dioxide splitting, thermochemical air separation, and thermochemical energy storage, operating near equilibrium means that the oxygen chemical potential of the solid and gas phases must not differ significantly. Herein we show that approaching this ideal is possible in thermal reduction only if the reaction step occurs at a specific, reaction coordinate- and material-dependent temperature. The resulting thermal reduction temperature profile also depends on the ratio of gas and solid flows.

08 HYDROGEN↗
DOE OSTI2023

A new operator-split Compton scattering method

In high-energy-density physics, when the temperatures are high (keV-range) and/or the densities are low, Compton scattering becomes the main energy transfer mechanism between the radiation field and the material. The interaction between the radiation field and the material is non-linear in the radiation field – due to induced processes caused by photons being bosons – and in the material temperature. Many existing codes use a Compton-Fokker-Planck (CFP) approximation – which is inaccurate for high photon energies or material temperatures – or use linear approximations within a time-step. Here, we have implemented a new Compton-heating method called OS-FBC (Operator-Split Full-Boltzmann Compton) that solves the full, nonlinear Compton-heating system with few approximations.

97 MATHEMATICS AND COMPUTING↗
DOE OSTI2025

A review on advances in oxidative coupling of methane (OCM) for industrial use and prospects of CO 2 –H 2 O splitting integration

The discovery of shale gas reserves has encouraged the development of direct methods for methane conversion into valuable chemicals, offering an alternative to indirect approaches that involve an energy-intensive and intermittent syngas production step, leading to high CO 2 emissions. Amongst the direct methods, the oxidative coupling of methane (OCM) is a potential pathway to reduce CO 2 emissions and can produce commodity chemicals such as ethylene, a chemical regarded as central to the petrochemical industry. Even though OCM has been studied for over four decades, the technology still has not found commercial application. Amongst the challenges regarding industrial deployment of OCM, the most significant one is the requirement of a high ethylene yield of 30 % which is currently reported to be around 20 %. Moreover, the highly exothermic nature of the process and controlling the carbon selectivity over oxides of carbon (COx) is the heart of the problem. Numerous researchers have presented promising results in terms of catalysts, reactor designs and feeding strategies for OCM. However, due to lack of inclusiveness in the results, none of the combination of catalysts, reactors and system optimizations has been able to bring about its industrial viability. The current paper presents an extensive review of the noteworthy attempts to achieve industrial targets for OCM. Moreover, a comprehensive criteria is presented which highlights the desired end state for the industrial deployment of OCM technology. Furthermore, the criteria is based on literature survey and a comparison with industrially deployed ethylene production plants i.e., naphtha or ethane steam cracker plants. Finally, a novel integration technology is presented which includes a combination of OCM and CO 2 -H 2 O splitting in a chemical looping reactor design to enable efficient energy utilization and minimal heat losses to the environment.

CO2 Splitting↗
DOE OSTI2024

Evolution of the nuclear spin-orbit splitting explored via the 32 Si( d,p ) 33 Si reaction using SOLARIS

The spin-orbit splitting between neutron 1p orbitals at 33 Si has been deduced using the single-neutron-adding (d,p) reaction in inverse kinematics with a beam of 32 Si, a long-lived radioisotope. Reaction products were analyzed by the newly implemented SOLARIS spectrometer at the reaccelerated-beam facility at the National Superconducting Cyclotron Laboratory. The measurements show reasonable agreement with shell-model calculations that incorporate modern cross-shell interactions, but they contradict the prediction of proton density depletion based on relativistic mean-field theory. The evolution of the neutron 1p-shell orbitals is systematically studied using the present and existing data in the isotonic chains of N = 17, 19, and 21. In each case, a smooth decrease in the separation of the 1p 3/2 - 1p 1/2 orbitals is seen as the respective p-orbitals approach zero binding, suggesting that the finite nuclear potential strongly influences the evolution of nuclear structure in this region.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2026

Improved nuclear-structure corrections to the hyperfine splitting of electronic and muonic deuterium

We calculate the nuclear-structure correction to the hyperfine splitting in both electronic and muonic deuterium using interactions from chiral effective field theory. We explore the sensitivity to different parameterizations of the nucleon-nucleon force, study the convergence pattern in the order-by-order chiral expansion, and estimate remaining uncertainties. Our results are consistent with earlier calculations from pionless effective field theory, offering new insights for a robust uncertainty quantification. Thanks to the order-of-magnitude reduction in uncertainty achieved with chiral effective field theory, the two-photon exchange contribution in electronic deuterium agrees with experimental extractions within 0.5σ, in contrast to the 2.6σ discrepancy observed in muonic deuterium. This study lays the groundwork for extending TPE calculations to HFS in heavier atomic systems.

Chiral effective field theory↗
DOE OSTI2023

Direct Laser Writing of Multimetal Bifunctional Catalysts for Overall Water Splitting

Water electrolysis is of interest as a sustainable way to produce clean hydrogen and oxygen fuel and help mitigate the rising problems of climate change while meeting global energy demands. High-efficiency, stable, and earth-abundant bifunctional catalysts are needed to enable more effective electrochemical cells for the hydrogen evolution reaction (HER) and oxygen evolution reaction (OER). Here, we investigate the synthesis, composition, performance, and mechanism of multimetal catalysts serving dual functionality in both OER and HER of water electrolysis. Through a laser synthesis method, we synthesized heterogeneous catalysts of nanocrystalline multimetallic alloy pockets embedded within an amorphous oxide matrix. We evaluated the performance and composition of a range of mixed transition-metal oxide materials for both OER and HER, ultimately synthesizing a Cr 0.01 Fe 0.27 Co 0.34 Ni 0.38 O x /C y catalyst that has a stable, high-rate, and competitive overall water splitting performance of 1.76 V at 100 mA cm –2 in an alkaline medium. Using density functional theory to gain insight as the active site and mechanism, we propose that the inclusion of a minor amount of Cr increases the degeneracy of energetic states that lowers the cost of forming the O 2 p–d bond and H 1 s–d bond due to the hybridization of s, p, and d orbitals from Cr. Using a two-electrode water electrolysis cell with a constant potential of 1.636 V to mimic the setup for fuel production, we found the catalyst to be stable at 14–15 mA cm –2 for 40 h. Furthermore, this laser synthesis method allowing for facile and rapid synthesis of complex multimetal systems demonstrates how doping a Fe, Co, and Ni heterogeneous amorphous/nanocrystalline structure with small amounts of Cr is important for bifunctional catalytic behavior, particularly for increasing HER functionality in advancing our understanding for future electrocatalytic design.

08 HYDROGEN↗
DOE OSTI2025

Ammonolysis Under NH 3 –Limiting Conditions as a Pathway to Improved LaTiO 2 N Water Splitting Photoanodes

LaTiO 2 N is a promising intermediate band gap semiconductor for the water splitting reaction, a pathway to hydrogen fuel from solar energy. However, the photoelectrochemical (PEC) activity of the material is hindered by defects, particularly Ti(III) species, which promote photocarrier recombination. These defects are formed during the high-temperature ammonolysis reaction. Here we show that improved LaTiO 2 N materials can be synthesized under NH 3 -limiting conditions by introducing N 2 to lower the NH 3 partial pressure to0.13atm.This reduces the Ti(III) defect density in the material from 6.06 × 10 16 to ∼4.61 × 10 15 cm −3 , by a factor of 13, based on electron paramagnetic resonance (EPR) spectroscopy. Any remaining Ti(III) defects are localized at the LaTiO 2 N surface, according to X-ray photoelectron spectroscopy (XPS), due to the formation of a depletion layer in the semico. Optical absorption spectra of the improved LaTiO 2 N reveal a blue-shifted band gap absorption edge and a suppressed sub-band gap absorption. Defect removal also reduces a sub-band gap surface photovoltage feature visible in the 1.0 atm reference material. The improved LaTiO 2 N supports a 1.57 mA cm −2 water oxidation photocurrent at 1.23 V RHE under simulated sunlight conditions, and an enhanced quantum efficiency of 4.5% (400 nm) for photocatalytic oxygen evolution from aqueous silver nitrate solution. Stable PEC operation is observed for over 55 min. This confirms that ammonolysis under NH 3 -limiting conditions improves the solar energy conversion properties of LaTiO 2 N. The ability to control metal ion defects in oxynitrides by varying the ammonia partial pressure during ammonolysis might be generally useful for the preparation of metal nitrides and oxynitrides.

defects↗
DOE OSTI2019

Wide-Bandgap Cu(In,Ga)S 2 Photocathodes Integrated on Transparent Conductive F:SnO 2 Substrates for Chalcopyrite-Based Water Splitting Tandem Devices

Recently, whole-chalcopyrite-based tandem devices for photoelectrochemical (PEC) water splitting have emerged as a promising route for obtaining ~20% solar-to-hydrogen efficiencies. Here we pursue this approach by demonstrating integration of the top cell wide-bandgap (E G ) chalcopyrite onto a transparent conductor, which is a critical step in the realization of tandem devices. We report specifically on our efforts to synthesize photoactive Cu(In,Ga)S 2 thin films on transparent conductive F:SnO 2 (FTO), while preserving the optoelectronic properties of the FTO substrate and preventing the formation of a resistive SnS x interfacial layer. We demonstrate that such attributes can be achieved via close-space sulfurization (CSS) of lower EG Cu(In,Ga)Se 2 precursors, co-evaporated on FTO at low-temperature. Depending on Cu(In,Ga)Se 2 precursors’ Ga and In content, the resulting Cu(In,Ga)S 2 solar absorbers have E G energies spanning 2.05 eV to 2.45 eV. The CSS process, which includes a low-temperature annealing in sulfur vapor followed by a high-temperature crystallization under inert atmosphere, allowed for up to 95% Se substitution with S in the chalcopyrite lattice, tuning both E G and band edge positions that impact PEC performance. Photoelectrochemical measurements performed under AM1.5G illumination in 0.5M H 2 SO 4 on the 2.05 eV CuInGaS 2 photocathode revealed a saturation photocurrent density (J SAT ) of -5.25 mA/cm 2 , a value corresponding to 38% of the absorber’s optical limit. We further concluded that such low J SAT originates from sub-par optical absorption of Cu(In,Ga)S 2 absorbers. Further enhancements of the CSS process are expected to improve material quality towards our end goal of achieving whole-chalcopyrite tandem PEC devices.

08 HYDROGEN↗
DOE OSTI2021

Influence of Surface and Structural Variations in Donor–Acceptor–Donor Sensitizers on Photoelectrocatalytic Water Splitting

Conjugated organic chromophores composed of linked donor (D) and acceptor (A) moieties have attracted considerable attention for photoelectrochemical applications. In this work, we compare the optoelectronic properties and photoelectrochemical performance of two D–A–D structural isomers with thiophene-X-carboxylic acid (X denotes 3 and 2 positions) derivatives and 2,1,3-benzothiadiazole as the D and A moieties, respectively. 5,5′-(Benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-3-carboxylic acid), BTD1, and 5,5′-(benzo[c][1,2,5]thiadiazole-4,7-diyl)bis(thiophene-2-carboxylic acid), BTD2, were employed in the study to understand how structural isomers affect surface attachments within chromophore–catalyst assemblies and their influence on charge-transfer dynamics. Crystal structures revealed that varying the position of the −COOH anchoring group causes the molecules to either contort out of a plane (BTD1) or adopt a near-perfect planar conformation (BTD2). BTD1 and BTD2 were co-loaded with either a water oxidation catalyst, [Ru(2,6-bis(1-methylbenzimidazol-2-yl)pyridine)-(4,4′-((HO) 2 OPCH 2 )2-2,2′-bipyridine)(OH 2 )] 2 , RuCt 2+ , or proton reduction catalyst [Ni(P 2 Ph N 2 C 6 H 4 CH 2 PO 3 H 2 ) 2 ] 2+ , NiCt 2+ , on oxide electrodes to facilitate photodriven water splitting reactions. Emission quenching measurements indicate that both BTD1 and BTD2 inject electrons into n-type SnO 2 |TiO 2 electrodes and holes into p-type NiO semiconductors from their respective excited states at high efficiencies >60%. Photocurrent densities of chromophore–catalyst assemblies obtained using linear sweep voltammetry (LSV) show that BTD2-sensitized photoanodes generate significantly more photocurrent than BTD1-sensitized electrodes; however, both exhibit similar performances at the photocathode. Photoelectrocatyltic measurements demonstrate that both BTD1 and BTD2 performed similarly, generating Faradaic efficiencies of 39 and 38% at the anode or 61 and 79% at the cathode. Transient absorption measurements suggest that the differences between the LSV and photoelectrocatalytic measurements result from the differences in quantum yields of the photogenerated redox equivalents, which is also a reflection of the varying metal oxide surface conformation. Our findings suggest that BTD2 should be investigated further in photocathodic studies since it has the structural advantage of being incorporated into diverse types of chromophore–catalyst assemblies.

Chromophores↗
DOE OSTI2024

TiO 2 /TiN Interface Enables Integration of Ni 5 P 4 Electrocatalyst with a III–V Tandem Photoabsorber for Stable Unassisted Solar-Driven Water Splitting

H 2 production by direct photoelectrochemical (PEC) water splitting has remained unachievable commercially, mainly due to rapid failure at the interface between the photoabsorber(s) and catalyst(s). PEC devices made from multijunction III-V semiconductors with platinum group metal (PGM) catalysts have yielded impressive initial solar-to-H 2 (STH) efficiency >19%, which rapidly corrodes in aqueous electrolytes. Here, TiO 2 /TiN layers were fused to create a bifunctional interface between a GaInP 2 /GaAs III-V tandem photoabsorber and a polycrystalline Ni 5 P 4 HER catalyst. Here, the TiO 2 serves as a conducting corrosion barrier, while a thin layer of much denser TiN (1 nm) blocks interlayer diffusion during fabrication. This strategy allows the elevated temperatures needed to crystallize the Ni 5 P 4 nanoparticles and fuse to the TiO 2 /TiN junction to achieve minimal optical loss without damaging the sensitive photoasbsorber. The resulting photocathode exhibits an initial STH efficiency of 11.4%-13.2% in sodium phosphate electrolyte at neutral pH 7. It operated continuously for over 200 h without failure above 10% STH efficiency, exceeding all previous benchmarks. The earth-abundant Ni 5 P 4 catalyst replaces costly PGM catalysts at comparable HER activity in neutral, acidic, or basic pH electrolytes.

08 HYDROGEN↗
DOE OSTI2019

A Silicon-Based Heterojunction Integrated with a Molecular Excited State in a Water-Splitting Tandem Cell

Semiconductor-based photocathodes with high light-absorption capability are of interest in the production of solar fuels, but many of them are limited by low efficiencies due to rapid interfacial back electron transfer. We demonstrate here that a nanowire-structured p-type Si (p-Si) electrode, surface-modified with a perylene-diimide derivative (PDI’), can undergo photo-reduction of a surface-bound, water reduction catalyst towards efficient H2 evolution under a low applied bias. At the electrode interface, the PDI’ layer converts green light into high-energy holes at its excited state for extraction of photogenerated electrons at the photoexcited p-Si. The photogenerated electrons at the reduced PDI’ are subsequently transferred to a surface-bound, molecular H2-evolution catalyst. Involvement of the photoexcited PDI’ enables effective redox separation between the electrons at the reduced catalyst and the holes at the valence band of p-Si. The heterojunction photocathode was used in a tandem cell by coupling with a dye-sensitized photoanode for solar-driven water splitting into H2 and O2.

water-splitting↗
DOE OSTI2019

Creating stable interfaces between reactive materials: titanium nitride protects photoabsorber–catalyst interface in water-splitting photocathodes

The development of a solar-driven water splitting device that replaces costly precious metals, while achieving stable high performance, is a major challenge. Transition metal phosphides are active and low-cost catalysts for the hydrogen evolution reaction (HER), although, none thus far have exhibited stable performance when interfaced with semiconductors. In this work, we report on a monolithic junction consisting of cubic-NiP 2 :TiN:Si, fabricated using both commercial and custom Si photovoltaics. Stable performance is achieved using an ultrathin film of crystalline TiN that effectively hinders atomic diffusion between interfaces during fabrication. Crystalline cubic-NiP 2 deposited on TiN/n + p-Si retains 97% of the bare Si photovoltage, comparable saturation current density to bare Si, and has a turnover frequency of 1.04 H 2 per site per s at -100 mV applied potential. In acid, it requires only -150 mV additional overpotential compared to the benchmark, Pt/TiN/n + p-Si, to reach a HER photocurrent density of -10 mA cm -2 . This photocathode maintains a stable H 2 photocurrent (±10%) for at least 125 hours, the duration of testing. When the same layers are fabricated on a commercial Si solar cell, this photocathode produced double the photocurrent density (36.3 mA cm -2 , under simulated 1.5 AM G illumination). Physical characterization gives detailed information on the properties responsible for the observed activity and durability of these interfaces. In general, the thin-film methodology presented here is widely applicable, demonstrates superior activity, and achieves long-term stability.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Photoelectrochemical water splitting using strain-balanced multiple quantum well photovoltaic cells

Starting from the classical GaInP/GaAs tandem photoelectrochemical water splitting device, higher solar-to-hydrogen efficiencies can be pursued by extending photon absorption to longer wavelengths. We incorporate strain-balanced GaInAs/GaAsP quantum wells into the bottom GaAs junction, to increase the range of photon absorption. The inclusion of 1.34 eV quantum wells in the depletion region of the bottom cell extends the absorption edge to 930 nm. With a corresponding increase in the thickness of the top cell for current matching, the light-limiting photocurrent increases by >8%. The estimated solar-to-hydrogen efficiency is 13.6 ± 0.5%, and we show a pathway to further improvement. With the semiconductor device remaining on the growth substrate, this quantum well architecture may enable improved stability and durability of the photoelectrochemical electrodes.

14 SOLAR ENERGY↗