SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
A high level computer programming language and a program library were developed to be used in writing programs for scheduling complex systems such as the space transportation system. The objectives and requirements of the study are summarized and unique features of the specified language and program library are described and related to the why of the objectives and requirements.
The backbone of the first reusable Space Transportation System (STS) is the Space Shuttle. The 25 kW Power Module is currently being defined by NASA as the first significant increment in capability beyond the baseline STS and is to be available for use in 1983. The Power Module is an orbit-based space system which will augment the capability of the Space Shuttle Orbiter to support Spacelab sortie missions and will provide a unique free-flying mode for a variety of payloads which require high capability, long duration, and man-tended operation. The Power Module will make it possible for the Space Shuttle Orbiter and Spacelab to remain on-orbit for periods of time significantly in excess of that provided by the baseline STS (7 days) without major penalty to the Shuttle and its payload.
The Space Transportation System, which includes the Space Shuttle, will reduce the costs of earth orbital operations while improving operational capabilities and flexibility. The Shuttle can deliver payloads up to 65,000 pounds to a 150-nmi circular orbit at a substantially lower operational cost per flight than the Titan III-C system, which has a payload delivery capability of only 30,000 pounds. In addition, the Space Shuttle can return to earth with up to 32,000 pounds of payload, a capability not provided by expendable launch vehicles. Typical payload missions are considered along with aspects of satellite placement and recovery, typical free-flying payloads, attached scientific payloads, and the typical nature of payload data.
Current and planned NASA space programs are outlined. The major current activity is the development and installation of the Space Transportation System consisting of the Space Shuttle, Spacelab and upper stages for payload launching from the Shuttle. NASA's space sciences program includes spaceborne astronomy by means of the future Space Telescope and Spacelab instruments as well as the current HEAO and IUE satellites. In the area of solar-terrestrial physics, the Solar Maximum Mission and the Solar Polar Mission are scheduled for 1980 and 1983, respectively. Planetary programs generally include ground-based and flyby observations to specify planetary environments, exploration missions to acquire knowledge of planetary processes, history and evolution, and study missions to investigate specific problems. Missions underway include the Voyager mission to Jupiter and Saturn and the Pioneer Venus mission. Research involving the inner planets, the outer planets and asteroids and comets is being planned.
Space-to-ground S-band communications system compatibility and performance tests were performed for the various radio frequency links. These tests consisted of the various uplink and downlink signal combinations (data rates) for the phase modulation system and both realtime and playback data rates for the frequency modulated downlink systems. In addition, tests involving encryption/decryption, Doppler, and acquisition were performed. Results show that the S-band transponder for the space shuttle orbiter is compatible with the S-band equipment of the AFSCF/RTS (Air Force Satellite Control Facility/Remote Tracking Station). It is also concluded that the performance of the orbiter-AFSCF/RTS direct link exceeds the required performance and that this communications link will meet the system requirements of the Space Transportation System.
The Environmental Control and Life Support Systems (ECLSS)/thermal systems analysis for the Space Transportation System 1 Flight (STS-1) was performed using the shuttle environmental consumables usage requirements evaluation (SECURE) computer program. This program employs a nodal technique utilizing the Fortran Environmental Analysis Routines (FEAR). The output parameters evaluated were consumable quantities, fluid temperatures, heat transfer and rejection, and cabin atmospheric pressure. Analysis of these indicated that adequate margins exist for the nonpropulsive consumables and related thermal environment.
The current status of three major propulsion elements for the Space Transportation System is reviewed: the Space Shuttle Main Engine, the External Tank, and the Solid Rocket Booster. Consideration is given to test and manufacturing experience in the last year, test and manufacturing plans for the coming year, and the current status of the hardware to support the first manned orbital flight.
The paper discusses the impact of the Space Transportation System (STS) and the Space Shuttle on the science educational community and gives an overview of past space education programs. Construction of four flight 'Orbiters' (Columbia, Challenger, Discovery, and Atlantis) is being planned, with each Orbiter containing an External Tank (ET) to power the Orbiter's main engines, and two solid rocket boosters (SRB). Each Orbiter can carry a crew of seven, has a cargo bay for 65,000 lb of satellites and scientific equipment, and has an average flight duration of up to 7 days. NASA educational programs reviewed are the Skylab Student Program, the 'Getaway Special' Program, and the Shuttle Student Involvement Project for Secondary Schools (SSIP-S), as well as ESA programs including the Educational Physics Experiments in Spacelab and the Access to Spacelab for Young Europeans Program. A 'Classroom in Space' and 'Space University' have been proposed for the future.
Space transportation requirements are major elements in the technical and economic realization of the entire SPS concept. First, steps in enhancing the shuttle include the Titan based liquid boost module (LBM) and liquid propellant boosters (LPB) to replace the present solid rocket boosters (SRB). The next choice between new ballistic or winged boosters must still be made; as well as the choice between series (staged) and parallel operation. Entirely new vehicles of large size are required before the economic and environmental problems of the prototype, or even demonstration, SPS can be resolved. Social impacts such as noise, and atmospheric pollution, locally and in the ionosphere, must be fully addressed. Although rather advanced technology and well developed operational management is required to properly target the average cost of gross cargo payloads into LEO at 30 $ (1979)/kg for the construction of the initial SPS, the further goal for repetitive construction of 30 to 60 SPS at 15 $ (1979)/kg for all operational payloads require the use of very advanced, long lived vehicles with a sophisticated operational organization using off shore, equatorial launch sites.
During the prototype vibration tests of the GAS adapter beam, significant impacting of the beam at its support points was observed. The cause of the impacting was traced to gaps under the mounting bolt heads. Because of the nonlinear nature of the response, it was difficult to evaluate the effects which Shuttle launch dynamics might have on the mounting bolt loads. A series of tests were conducted on an electrodynamic exciter in which the transient acceleration time histories, which had been measured during the Space Transportation System-1 (STS-1; Space Shuttle mission 1) launch, were simulated. The actual flight data had to be filtered and compensated so that it could be reproduced on the shaker without exceeding displacement and velocity limitations. Mounting bolt loads were measured directly by strain gages applied to the bolts. Various gap thicknesses and bolt torques were investigated. Although increased gap thickness resulted in greater accelerations due to impacting, the bolt loads were not significantly affected. This is attributed to the fact that impacting excited mostly higher frequency modes which do not have significant modal mass.
A comprehensive evaluation is made of materials and structural technology requirements for future space transportation systems, large spacecraft, and space structures. Exceptional promise is noted in carbon-carbon composites for large area thermal protection systems. High temperature test facilities, techniques, and instrumentation systems have unfortunately been neglected, and a materials systems data base suitable for high confidence design of long life space structures has yet to be compiled with a view to material environments in low earth and geosynchronous orbits. A coordinated analysis, ground test, and in-orbit experimentation program for candidate structure designs is called for.
An overview is given of NASA's technical program offices and their status, recent accomplishments, and plans for the future. Programs covered include the Space Transportation System, TDRS, the Deep Space Network, the various Spacelab missions, the Galileo mission to Jupiter, the Ulysses mission over the poles of the sun, the Hubble Space Telescope, and the Space Station program.
NASA has just completed an in-house Phase B Study (one of three studies) for the preliminary definition of a teleoperated robotic device that will be used on the National Space Transportation System (NSTS) and the Space Station to assist the astronauts in the performance of assembly, maintenance, servicing, and inspection tasks. This device, the Flight Telerobotic Servicer (FTS), will become a permanent element on the Space Station. Although it is primarily a teleoperated device, the FTS is being designed to grow and evolve to higher states of autonomy. Eventually, it will be capable of working from the Orbital Maneuvering Vehicle (OMV) to service free-flying spacecraft at great distances from the Space Station. A version of the FTS could also be resident on the large space platforms that are part of the Space Station Program.
A thermal protection tile for earth-to-orbit transports is described. The tiles consist of a rigid external shell filled with a flexible insulation. The tiles tend to be thicker than the current Shuttle rigidized silica tiles for the same entry heat load but are projected to be more durable and lighter. The tiles were thermally tested for several simulated entry trajectories.
Undeveloped pump-fed, liquid propellant rocket engine cycles were assessed and evaluated for application to Next Manned Transportation System (NMTS) vehicles, which would include the evolving Space Transportation System (STS Evolution), the Personnel Launch System (PLS), and the Advanced Manned Launch System (AMLS). Undeveloped engine cycles selected for further analysis had potential for increased reliability, more maintainability, reduced cost, and improved (or possibly level) performance when compared to the existing SSME and proposed STME engines. The split expander (SX) cycle, the full flow staged combustion (FFSC) cycle, and a hybrid version of the FFSC, which has a LOX expander drive for the LOX pump, were selected for definition and analysis. Technology requirements and issues were identified and analyses of vehicle systems weight deltas using the SX and FFSC cycles in AMLS vehicles were performed. A strawman schedule and cost estimate for FFSC subsystem technology developments and integrated engine system demonstration was also provided.
A general overview of the Orbital Sciences Corporation (OSC) is presented. The following topics are covered: (1) manpower, facilities, and financial growth; (2) organization and management team; (3) the Space Data Division organization; (4) the Chandler facility; (5) Space Data-Products and Services; (6) space transportation systems; (7) spacecraft and space support systems; (8) turn-key suborbital launch services and support systems; and (9) OSC suborbital booster performance.
The topics addressed are history of reusable external insulation (RSI), and examples of shuttle RSI development challenges, which includes: (1) manufacturing of raw materials, such as fibers, coating components; (2) design of tile planform size, strain isolation, and gap heating; (3) insulation, such as bonding, bond verification, tolerances, and quality control; and (4) operation, such as durability, and water proofing.
One of the most important elements of a human planetary base is power production. Lunar data make it clear that several types of solar-to-electric converters can be manufactured on the Moon. Materials research and processing demonstrations are suggested that can be carried out on Earth, the Space Transportation System (STS), the International Space Station (ISS), and on the Moon to advance the in situ production of solar-to-electric power systems on the Moon. Many of the technologies will be applicable to Mars, the silicate moons, and asteroids.