Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Sn”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Development and First Test of the 15 T Nb$_3$Sn Dipole Demonstrator MDPCT1

Fermilab in the framework of the U.S. Magnet Devel-opment Program (MDP) has developed a Nb$_3$Sn dipole demonstrator for a post-LHC hadron collider. The magnet uses 60-mm aperture 4-layer shell-type graded coils. The cable in the two inner-most layers has 28 strands 1.0 mm in diameter and the cable in the two outermost layers has 40 strands 0.7 mm in diameter. An inno-vative mechanical structure based on aluminum I-clamps and a thick stainless steel skin is used to preload Nb$_3$Sn coils and support large Lorentz forces. The maximum field for this magnet is limited by 15 T due to mechanical considerations. The first magnet assembly was done with lower coil pre-load to achieve 14 T and minimize the risk of coil damage during assembly. This paper describes the magnet design and the details of its assembly procedure, and re-ports the results of its cold tests.

43 PARTICLE ACCELERATORS↗
DOE OSTI2020

First Field Measurements of the 15 T Nb 3 Sn Dipole Demonstrator MDPCT1

Within the US Magnet Development Program (MDP) a 15 T Nb 3 Sn dipole was developed, to demonstrate a magnet design for a post-LHC pp Collider. Specifically, the magnet design is based on 60 mm aperture 4-layer shell-type coils, graded between the inner and outer layers to maximize the magnet performance. The cable in the two innermost layers has 28 strands 1.0 mm in diameter and the cable in the two outermost layers has 40 strands 0.7 mm in diameter. Both cables use RRP Nb3Sn wires produced by Bruker-OST. Magnet coils are surrounded by vertically-split thick iron laminations, con-nected by aluminum I-clamps, and a thick stainless-steel skin. The magnet was tested at the Vertical Magnet Test Facility (VMTF) at Fermilab. This paper reports the first results of magnetic measure-ments of the 15 T Nb 3 Sn dipole demonstrator including geometrical harmonics, coil magnetization and iron saturation effects. The ex-perimental data are compared with the magnetic calculations.

43 PARTICLE ACCELERATORS↗
DOE OSTI2023

Status of the MQXFB Nb 3 Sn Quadrupoles for the HL-LHC

Here, the cold powering test of the first two prototypes of the MQXFB quadrupoles (MQXFBP1, now disassembled, and MQXFBP2), the Nb 3 Sn inner triplet magnets to be installed in the HL-LHC, has validated many features of the design, such as field quality and quench protection, but has found performance limitations. In fact, both magnets showed a similar phenomenology, characterized by reproducible quenches in the straight part inner layer pole turn, with absence of training and limiting the performance at 93% (MQXFBP1) and 98% (MQXFBP2) of the nominal current at 1.9 K, required for HL-LHC operation at 7 TeV. Microstructural inspections of the quenching section of the limiting coil in MQXFBP1 have identified fractured Nb 3 Sn sub-elements in strands located at one specific position of the inner layer pole turn, allowing to determine the precise origin of the performance limitation. In this paper we outline the strategy that has been defined to address the possible sources of performance limitation, namely coil manufacturing, magnet assembly and integration in the cold mass.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Nb$_{3}$Sn SRF Photogun High Power Test at Cryogenic Temperatures

Superconducting RF (SRF) photoguns are emerging as promising candidates to produce highly stable electrons for Ultra fast Electron Diffraction/Microscopy (EUD/UEM) applications due to the ultrahigh shot-to-shot stability compared to room temperature RF photoguns. SRF technology was prohibitively expensive for industrial use until two recent advancements: Nb 3 Sn and conduction cooling. SRF gun can provide a CW operation capability while consuming only several Watts of RF power which eliminates the need of an expensive high power RF system and saves a facility footprint. Euclid is developing a continuous wave (CW), 1.5-cell, MeV-scale SRF conduction cooled photogun operating at 1.3 GHz. Here, in this paper, we present first high power results of the gun covered with Nb 3 Sn.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Quench Behavior of 18-mm-Period, 1.1-m-Long Nb 3 Sn Undulator Magnets

A novel Nb 3 Sn-based superconducting undulator (SCU) was developed and integrated into the Advanced Photon Source (APS) at Argonne National Laboratory. The SCU achieved user operation within an accelerator environment. Compared to its Nb-Ti counterpart, the Nb 3 Sn SCU operates at substantially higher currents. Thus, a detailed experimental evaluation of the SCU magnets’ performance was necessary under both “wet” and indirectly cooled conditions to ensure its reliability during operation. Here our study indicated that the cooling method has a noticeable influence on the magnet's behavior. Specifically, energy dissipation in the magnets during quenches was observed to be greater under indirect cooling than with “wet” cooling. This investigation provided insights into the safe operational limits. Guided by these insights the more challenging high-current tests were successfully carried out at the end of the user phase. The SCU achieved the design undulator field of 1.17 T at 820 A and 4.2 K, with a magnetic gap of 9.5 mm and a period of 18 mm. Actual performance exceeded the specifications, reaching 850 A.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

Quench Performance of a Large-Aperture Nb 3 Sn Cos-Theta Coil With Stress Management in Dipole Mirror Configurations

A 123-mm-aperture Nb 3 Sn cos-theta (CT) dipole coil with stress management (SM) has been developed at Fermilab to demonstrate and test the SM concept, including coil design, fabrication technology, and performance. The first SMCT1 coil has been fabricated and assembled together with a 60-mm-aperture Nb 3 Sn coil inside a dipole mirror structure and tested separately and in series with the inner coil. This article summarizes the design, parameters, and quench performance of the SMCT1 coil in a dipole mirror configuration.

43 PARTICLE ACCELERATORS↗
DOE OSTI2024

The Role of Azimuthal Prestress in the Longitudinal Degradation of Nb 3 Sn Superconducting Magnets

Superconducting magnet coils are subject to enormous electro-magnetic forces which push the cables away from the winding pole, and against the surrounding structure. This structure is usually optimized trying to limit the overall motion and the strains experienced by the superconducting elements. To achieve this, preload forces are applied both in the coil cross-section and along its length. If the e.m. forces overcome these preloads, separation between the coil and the pole occurs, resulting in an overall loss of rigidity. During the magnet design process, it is often tempting to treat the optimization of the azimuthal and longitudinal preload systems separately. However, the two are inextricably related: as the cross-section preload increases, friction can prevent any motion in the longitudinal plane, and decreasing it can instead allow dangerous motions in the conductor ends. The latter can result in very high strains and, in Nb 3 Sn conductors, damage that can prevent the magnet to reach the desired performances. In an attempt to define design guidelines, in this paper we use simplified numerical models to compute, as a function of the in-plane prestress, the variation of the peak strains in the end region of the coils. Finally, we investigate the impact of the azimuthal prestress on a real magnet case, the High-Luminosity Nb 3 Sn Quadrupole MQXF.

Nb3Sn↗
DOE OSTI2025

Status and Challenges in the MQXFB Nb 3 Sn Quadrupoles for the HL-LHC

The inner triplet (or low-β) quadrupole magnets are among the components to be upgraded in LHC interaction regions for the HL-LHC project. The new quadrupole magnets, called MQXF, are based on Nb 3 Sn superconducting magnet technology, with a conductor peak field of 11.3 T. CERN is in charge of the fabrication of the MQXFB variant, the longest Nb 3 Sn accelerator magnets designed and manufactured up to now, with a magnetic length of 7.2 m. Two magnets, MQXFBP3 and MQXFB02, reached the HL-LHC project requirements. However, they still exhibited a limitation at 4.5 K with a phenomenology similar to the one observed on the first two prototypes. After improvements on the cold mass (longitudinal welding) and magnet assembly (elimination of overstress on the conductor during loading) procedures, a series of modifications were implemented in MQXFB03 at the level of the coil fabrication to address and/or reduce weaknesses in the coils. The magnet was tested and was the first to achieve performance requirements at both 1.9 K and 4.5 K, with no signs of conductor limitation at 4.5 K. MQXFB is now in the series production phase, with around 2/3 of the coils completed and half of the magnets assembled. We provide in this paper an overview of the MQXFB program, with a summary of the main recent achievements and an overall status of the fabrication.

43 PARTICLE ACCELERATORS↗
DOE OSTI2026

Microwave Vortex Motion Characterization of Nb$_{3}$ Sn Coatings for Applications in High Magnetic Fields

In this work, microwave measurements carried out in dielectric-loaded resonators exposed to high magnetic fields are exploited to yield the surface impedance of Nb$_3$ Sn superconducting coatings deposited via two different techniques: vapor tin diffusion, and DC magnetron sputtering. The obtained data lead to qualitative interpretations on both the Nb$_3$ Sn superconducting properties, and vortex-dynamics and pinning, of each coating separately, as well as simple distinctive features when comparing those. When examining the respective surface impedances at varying field, it is expected that the studied films perform at substantially diverse magnitudes of flux-flow resistivity, but also in well-differentiated pinning regimes, yet the obtained surface resistances of both samples are comparable, thus demonstrating that there is room for film optimization at the expense of certain compromise between the parameters involved.

Nb3Sn↗
DOE OSTI2022

Large magnetoelectric resistance in the topological Dirac semimetal α-Sn

The spin-momentum locking of surface states in topological materials can produce a resistance that scales linearly with magnetic and electric fields. Such a bilinear magnetoelectric resistance (BMER) effect offers a new approach for information reading and field sensing applications, but the effects demonstrated so far are too weak or for low temperatures. This article reports the first observation of BMER effects in topological Dirac semimetals; the BMER responses were measured at room temperature and were substantially stronger than those reported previously. The experiments used topological Dirac semimetal α-Sn thin films grown on silicon substrates. The films showed BMER responses that are 10 6 times larger than previously measured at room temperature and are also larger than those previously obtained at low temperatures. These results represent a major advance toward realistic BMER applications. Significantly, the data also yield the first characterization of three-dimensional Fermi-level spin texture of topological surface states in α-Sn.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Tunable topological Dirac surface states and van Hove singularities in kagome metal GdV 6 Sn 6

Transition-metal-based kagome materials at van Hove filling are a rich frontier for the investigation of novel topological electronic states and correlated phenomena. To date, in the idealized two-dimensional kagome lattice, topologically Dirac surface states (TDSSs) have not been unambiguously observed, and the manipulation of TDSSs and van Hove singularities (VHSs) remains largely unexplored. Here, we reveal TDSSs originating from a $\mathbb{Z}_2$ bulk topology and identify multiple VHSs near the Fermi level (E F ) in magnetic kagome material GdV 6 Sn 6 . Using in situ surface potassium deposition, we successfully realize manipulation of the TDSSs and VHSs. The Dirac point of the TDSSs can be tuned from above to below E F , which reverses the chirality of the spin texture at the Fermi surface. These results establish GdV 6 Sn 6 as a fascinating platform for studying the nontrivial topology, magnetism, and correlation effects native to kagome lattices. They also suggest potential application of spintronic devices based on kagome materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2023

Strain measurements of Nb₃Sn coils with optical fibers

The HL-LHC at CERN will be using new superconducting quadrupole magnets (MQXFA) made of Nb₃Sn that are in the process of being tested before installation in the LHC tunnel. MQXFA07 and MQXFA08 magnets failed because of high stress developed at the coil wedge/end spacer interface, where the Nb₃Sn coil, the stainless-steel end parts, and copper wedges exhibit different strain responses. Interrogating a cut piece of coil QXFP06 with optical fibers, we expect to get a better understanding of the stress response of the coil wedge/end spacer interface.

Nisa, Kuvvetn↗
DOE OSTI2021

Isotropic nature of the metallic Kagome ferromagnet Fe 3 Sn 2 at high temperatures.

Anisotropy and competing exchange interactions have emerged as two central ingredients needed for centrosymmetric materials to exhibit topological spin textures. Fe 3 Sn 2 is thought to have these ingredients as well, as it has recently been discovered to host room temperature skyrmionic bubbles with an accompanying topological Hall effect. We present small-angle inelastic neutron scattering measurements that unambiguously show that Fe3Sn2 is an isotropic ferromagnet below TC ≈ 660 K to at least 480 K – the lower temperature threshold of our experimental configuration. Fe 3 Sn 2 is known to have competing magnetic exchange interactions, correlated electron behavior, weak magnetocrystalline anisotropy, and lattice anisotropy; all of these features are thought to play a role in stabilizing skyrmions in centrosymmetric systems. Our results reveal that at elevated temperatures, there is an absence of significant magnetocrystalline anisotropy and that the system behaves as a nearly ideal isotropic exchange interaction ferromagnet, with a spin stiffness D(T = 480 K) = 168 meV Å2, which extrapolates to a ground state spin stiffness D(T = 0 K) = 231 meV Å2.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Neutrino and Electromagnetic Signatures from Superluminous Supernovae: A Case Study for SN 2017egm

Superluminous supernovae (SLSNe) are rare transients that are ∼10–100 times more luminous than ordinary stellar explosions, reaching peak optical luminosities ∼10 44 –10 45 erg s −1 . The energy source powering SLSNe remains uncertain. In this work, we explore the multiwavelength and multimessenger signatures of the scenario in which SLSNe are powered by a newly born millisecond magnetar. We model the dynamical evolution and emission from the coupled system comprised of the magnetar, wind, nebula, and supernova ejecta, consistently evaluating the pair multiplicity of the wind and nebula regions, and the bulk wind Lorentz factor governing the e + − e − injection spectra in the nebula. We compute the thermal and nonthermal electromagnetic signatures, neutrino signatures, and investigate their detection prospects. For SN 2017egm, the nearest observed SLSNe, our prediction for high-energy gamma rays matches the recent detection by the Fermi Large Area Telescope. For neutrinos, using SN 2017egm a canonical SLSNe, we find that in the era of the Vera C. Rubin Observatory, a stacking analysis with upcoming neutrino observatories can lead to 3σ detection significance of neutrino events from a population of SLSNe within a decade of operation.

Mukhopadhyay, Mainak [Fermi National Accelerator L↗
DOE OSTI2022

A Rapid Ionization Change in the Nebular-phase Spectra of the Type Ia SN 2011fe

Abstract We present three new spectra of the nearby Type Ia supernova (SN Ia) 2011fe covering ≈480–850 days after maximum light and show that the ejecta undergoes a rapid ionization shift at ∼500 days after explosion. The prominent Fe iii emission lines at ≈4600 Å are replaced with Fe i +Fe ii blends at ∼4400 Å and ∼5400 Å. The ≈7300 Å feature, which is produced by [Fe ii ]+[Ni ii ] at ≲400 days after explosion, is replaced by broad (≈±15,000 km s −1 ) symmetric [Ca ii ] emission. Models predict this ionization transition occurring ∼100 days later than what is observed, which we attribute to clumping in the ejecta. Finally, we use the nebular-phase spectra to test several proposed progenitor scenarios for SN 2011fe. Nondetections of H and He exclude nearby nondegenerate companions, [O i ] nondetections disfavor the violent merger of two white dwarfs, and the symmetric emission-line profiles favor a symmetric explosion.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2026

A Natural ≳100× Telescope: Discovery of the Strongly Lensed Type II SN 2025mkn at z = 1.37

We present the discovery of SN 2025mkn, a gravitationally lensed Type II supernova. First detected as a blue transient in Zwicky Transient Facility (ZTF), 0. "83 from a z = 0.42 elliptical galaxy, the follow-up SNIFS/UH2.2 m and LRIS/Keck spectra revealed absorption lines at z = 1.371. Later JWST NIRCam imaging shows that the bright transient is a close pair of point sources separated by 0. "07, and a 30 times fainter counterimage opposite the lens, for which NIRSpec reveals strong Hα emission also at z = 1.371. The lightcurves and spectra are consistent with the Type II supernova source being magnified ≳100 times, with ∼250 required to reconcile its luminosity with that of nearby events such as SN 2023ixf. Lens models are consistent with such high magnifications, and always show that the faint image arrived first (undetected in earlier ZTF imaging), consistent with the later spectral phase of this fainter image. A fourth image is also predicted and possibly detected in the NIRSpec data. Lightcurve-based time-delay measurements are not possible due to the first image being the faintest; however, the resolved NIRSpec spectra offer a future opportunity for time-delay cosmography through supernova phase measurements.

Strong gravitational lensing↗
NASA NTRS1972

Particle-hole states in Sn 120

The 45 MeV deuteron beam from the Berkeley 88-inch cyclotron was used to study the particle-hole states in Sn-120. The present work resolved a number of individual levels and compared their strength and excitation energy with that observed in the Sn-120(d, He-3) reaction, which was also remeasured. A schematic diagram of the scattering system is given along with a description.

Leonard, R. F.↗
NASA NTRS1977

Investigation of the fracture mechanism in Ti-5Al-2.5Sn at cryogenic temperatures

The influence of microstructure on the fracture mechanism and plane-strain fracture toughness of Ti-5Al-2.5Sn was studied through the use of fractography and metallographic sectioning techniques. One-inch thick plates of extra low interstitial (ELI) and normal interstitial Ti-5Al-2.5Sn were mill annealed at 815 C followed by either air or furnace cooling. These variations in composition and cooling rate resulted in differences in the volume fraction and internal structure of the iron-stabilized phase, and in the crystallographic texture and ordering of the alpha matrix. The tensile properties of these plates were determined at 20 K, 77 K, and 295 K. The air-cooled ELI plate was the toughest material evaluated.

Vanstone, R. H.↗