Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SiO2”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2018

Solid State Ultracapacitor

An ink of the formula: 60-80% by weight BaTiO3 particles coated with SiO2; 5-50% by weight high dielectric constant glass; 0.1-5% by weight surfactant; 5-25% by weight solvent; and 5-25% weight organic vehicle. Also a method of manufacturing a capacitor comprising the steps of: heating particles of BaTiO3 for a special heating cycle, under a mixture of 70-96% by volume N2 and 4-30% by volume H2 gas; depositing a film of SiO2 over the particles; mechanically separating the particles; incorporating them into the above described ink formulation; depositing the ink on a substrate; and heating at 850-900 C for less than 5 minutes and allowing the ink and substrate to cool to ambient in N2 atmosphere. Also a dielectric made by: heating particles of BaTiO3 for a special heating cycle, under a mixture of 70-96% by volume N2 and 4-30% by volume H2 gas; depositing a film of SiO2 over the particles; mechanically separating the particles; forming them into a layer; and heating at 850-900 C for less than 5 minutes and allowing the layer to cool to ambient in N2 atmosphere.

Rolin, Terry D.↗
NASA NTRS2018

Degradation of Intercalated Graphite Epoxy Composites Exposed to Low Earth Orbit

Four different graphite fiber/epoxy composites were exposed to the wake-side low Earth orbit (LEO) environment on the Optical Reflector Materials Experiment III (ORMatE-III) platform mounted on the exterior of the ISS for two years in order to determine their long term durability in the space environment. Three of the composite samples used bromine intercalated P100 fibers and one used pristine P100 fibers. One of the P100-Br samples was coated with a protective SiO2 layer, and half of another was coated with SiO2. Results were compared with the EOIM-III experiment which exposed the same materials in LEO in the ram direction for 42 h on the Space Shuttle. Although the atomic oxygen (AO) fluence of the ORMatE-III samples was one-third of the EOIM-III exposure, the resulting effects were qualitatively the same. Both found that SiO2 coated intercalated graphite composites showed no AO erosion, verifying that conventional protection strategies are applicable to bromine intercalated composites. Both found that bromine intercalation does not alter the AO erosion rates of graphite fiber/epoxy composites. Both found no bromine was detected to have migrated into the surrounding epoxy, even for highly eroded fibers and epoxy, allaying fears that bromination could compromise the properties of the epoxy. And both found no corrosive bromine was detected to have been released by the fibers allaying fears that outgassing could degrade sensitive electronics. The uncoated EOIM-III samples suffered slightly greater erosion resulting in a slightly higher solar absorptance. The general conclusion is that ram AO exposure had very similar effects on graphite fiber epoxy composites in both the EOIM-III and ORMatE-III experiments, and in neither case did bromine intercalation of the fibers substantially influence that degradation.

Intercalated graphite↗
DOE OSTI2020

Coated U3Si2 pellets with enhanced water and steam oxidation resistance

A method of forming a water resistant boundary on a fissile material for use in a water cooled nuclear reactor is described. The method comprises coating the fissile material, such as a pellet of U3Si2 and/or the grain boundaries, to a desired thickness with a suitable coating material, such as atomic layer deposition or a thermal spray process. The coating material may be any non-reactive material with a solubility at least as low as that of UO2. Exemplary coating materials include ZrSiO4, FeCrAl, Cr, Zr, Al—Cr, CrAl, ZrO2, CeO2, TiO2, SiO2, UO2, ZrB2, Na2O—B2O3—SiO2—Al2O3 glass, Al2O3, Cr2O3, carbon, and SiC, and combinations thereof. The water resistant layer may be overlayed with a burnable absorber layer, such as ZrB2 or B2O3—SiO2 glass.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗
DOE OSTI2021

Study of the crystal structure of SnS thin films by atomic layer deposition

Tin monosulfide, SnS, absorbs visible light and holds promise for thin-film photovoltaics. However, the optoelectronic properties of this material vary among the different structural phases, and control over the phase of vapor deposited SnS thin films is not well understood. In order to study the phases and crystallographic orientations of SnS films, films with thicknesses of 90 nm–750nm were prepared by atomic layer deposition (ALD) at temperatures between 80 °C and 200 °C on amorphous silicon dioxide (a-SiO2) and single-crystal sodium chloride (NaCl). We show that the crystal structures and orientations of the ALD-SnS thin films vary with deposition temperature, film thickness, and substrate. We confirm the presence of metastable cubic π-SnS in co-existence with the thermodynamically stable orthorhombic α-SnS and find that the π phase is more prevalent at lower deposition temperatures. The films grown on a-SiO2 are textured, the degree of texturing increases with lower temperature or higher thickness, and the deposited phase is also thickness dependent. Upon annealing, which is known to promote SnS grain growth, all films revert to orthorhombic α-SnS. The films grown on the NaCl(100) substrate exhibit a much higher degree of texturing and show different preferred orientations dependent on the phase: π-(400) and α-(111) or α-(040). In addition, we demonstrate a proof-of-concept device made from the highly oriented SnS grown on NaCl.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Quadratic magnetoresistance across the insulator–metal transition in V4O7 thin films

We present a comparative magnetotransport study of V4O7 thin films grown simultaneously on single-crystal Al2O3 (r-cut) and amorphous SiO2 substrates, to examine substrate-induced effects on electronic transport across the insulator–metal transition (IMT). Temperature-dependent resistivity reveals a broad electronic ordering regime below the IMT, with both films exhibiting similar transition temperatures but differing by nearly an order of magnitude in absolute resistivity. Despite this strong substrate dependence of the resistivity scale, the magnetoresistance remains predominantly quadratic in magnetic field over wide temperature intervals for both substrates. Analysis of the quadratic magnetoresistance defines an effective mobility scale that evolves systematically across the IMT and exhibits a similar temperature dependence for the two films. Structural characterization, including atomic-resolution scanning transmission electron microscopy of the V4O7/Al2O3 interface and azimuthal X-ray diffraction measurements, reveals a sharp interface and well-defined in-plane crystallographic registry for the r-cut film, in contrast to the rotationally averaged in-plane structure expected for films grown on amorphous SiO2. These results indicate that while substrate-controlled structural registry modifies the resistivity scale, the quadratic magnetotransport response across the IMT remains largely robust, providing a consistent diagnostic of electronic transport in V4O7 thin films.

25 ENERGY STORAGE↗
DOE OSTI2026

Enhanced coercivity in Fe5C2/SiO2 core/shell nanocrystals

Rod-shaped Fe5C2 and core/shell Fe5C2/SiO2 nanocrystals were synthesized via a solution-based chemical method. Structural analysis confirmed the monoclinic phase of Fe5C2 with space group C2/c. Zero-field-cooling (ZFC) and field-cooling (FC) magnetization curves revealed distinct magnetic behaviors: uncoated Fe5C2 exhibited a low-temperature FC plateau indicative of strong dipolar interactions, while Fe5C2/SiO2 showed a monotonic increase in FC magnetization, suggesting reduced dipolar interactions due to SiO2 surface passivation. Isothermal remanent magnetization (IRM) and DC demagnetization (DCD) measurements supported this trend, with δM plots confirming weaker dipolar interactions in the coated sample. Bloch’s law fitting of temperature-dependent saturation magnetization showed a smaller Bloch’s constant for pure Fe5C2 and a larger value for Fe5C2/SiO2, reflecting enhanced surface disorder and reduced exchange coupling in the latter. Notably, Fe5C2/SiO2 demonstrated increased coercivity, attributed to decreased dipolar interaction and elevated surface anisotropy. Kneller’s law fitting yielded higher blocking temperatures for Fe5C2 (476 K) than Fe5C2/SiO2 (456 K), highlighting the impact of dipolar interactions on magnetic relaxation. These findings illustrate how SiO2 coatings effectively modulate dipolar interactions and enhance coercivity in Fe5C2 nanocrystals.

Joshi, Pramanand [Department of Physics, Universit↗
DOE OSTI2022

NOMAD total scattering dataset for SMC data challenge

The data provided for this challenge was measured using the Nanoscale-Ordered Materials Diffractometer (NOMAD) at the Spallation Neutron Source (SNS) at Oak Ridge National Laboratory. The data is stored in a hdf5 file following the NeXus standard and can be read with tools built for either. While the NeXus format is self-describing, there is benefit to explaining some details. The data is stored in 4 NXentries in the file. The NXentries that begin with 'amorphous_SiO2' are for the amorphous data, and the NXentries that begin with 'crystalbolite_SiO2' are for the crystalline material. Solutions that were produced by the scientist are in the entries that end with '_byhand'. Each of the NXdata groups are the plottable data with the 'signal', axes, and (in the case of by-hand components) 'auxiliary_signals' describing which fields should be used. The by-hand component ranges are listed in a 'component' attribute of the various signals. The filtered Sr data is the Fourier transform of the combined components. The data can be quickly viewed using tools such as Nexpy or HDFview. Most languages have libraries that can work with HDF5 (eg. H5py for python) a partial list is provided at https://manual.nexusformat.org/utilities.html The data can be quickly viewed using tools such as Nexpy or HDFview. https://neutrons.ornl.gov/nomad https://www.hdfgroup.org/solutions/hdf5 https://www.nexusformat.org/

36 MATERIALS SCIENCE↗
DOE OSTI2025

AUTOIGNITION DELAY TIMES FOR REFORMATE GAS MIXTURES FROM METHANE GAS ENGINES

Methane slip is a prominent issue in natural gas reciprocating engines that are used in transportation and marine applications. The incomplete combustion that results in methane slip can be resolved with the introduction of hydrogen within the combustion mixture to improve methane oxidation and further enable combustion within the engine crevices where methane has previously remained unreacted. Steam methane reforming (SMR) is a common method used to produce hydrogen and can be used to design an onboard device to reduce methane slip from reciprocating engines. The development of this reformer device requires the validation of high-fidelity chemical kinetic models at the low temperatures of the crevice volumes of these engines. In this work, auto-ignition data is obtained using a shock tube at lean (φ—0.714 or λ—1.4) and stoichiometric (φ, λ = 1) equivalence ratios spanning a temperature range of 1042–1234 K at the 80-bar operating pressure of the test engine. Blends of methane, hydrogen, and reformate products from the SMR reaction are shock-heated in synthetic air, with the ignition delay time measured using an OH* chemiluminescence detector at 310 nm and a CH* detector at 430 nm. The experimental results are compared to several state-of-the-art chemical kinetic mechanisms from the literature. In general, most of the mechanisms show very good agreement with experiments at higher temperatures, with simulation results showing little deviation from experiments at lower temperatures. A sensitivity analysis was conducted, and the results reveal that the reaction H2 + CH3O2 = H + CH3O2H has a very significant role in determining low-temperature ignition delay times (IDTs) of SMR mixtures. These findings provide valuable insights into the chemical kinetics governing methane reformate combustion and contribute to the optimization of onboard reformer designs aimed at mitigating methane slip in natural gas-fueled engines.

Fraze, Matthew↗
DOE OSTI2024

Alpha-Quartz Plastic Strength Investigation Via Diffraction Experiments on Novaculite Using A D-Dia and Elastic Plastic Self- Consistent Interpretation [Thesis}

X-Ray Tomography. Porosity is commonly measured using mercury injection (MI) or water immersion porosimeter (WIP). Both MI and WIP utilize pressure to fill open voids with mercury or water respectively. A measure of the volume change of the sample is then used to estimate the percentage of open voids. However, for the purpose of rheological study it is important to get an accurate measure of open and closed voids. X-ray tomography has been selected as it offers a three-dimensional view into the sample that can quantify all pores limited only by the voxel size which is in the micron range for this study. Radiographs for tomography were collected at the Material Science and Technology Division at Los Alamos National Lab using the Carl Zeiss Xradio 520 instrument and Scout-and-Scan version 16.1 operating software. Two samples were imaged, the starting material and the deformed sample SiO2_65. 3001 radiographs were taken of the starting material with a 6 second exposure time using a 4x objective lens. The x-ray beam was set to 60 kilovoltage peak (kVp) and 5 watts. 1901 radiographs were taken of SiO2_65 with a 25 second exposure time using a 10x objective lens. The x-ray beam was set to 80 kVp and 7 watts. Radiograph files were analyzed by Brian Patterson using Avizo. Void and inclusion volumes were output by voxel sized (1.03 μm) slices, used to calculate a total percentage volume for the starting material.

36 MATERIALS SCIENCE↗
DOE OSTI2024

Development of Manganese and Iron Mixed Metal Oxides for Thermochemical Energy Storage

Energy storage plays an essential role for sustainable and renewable energy use in an effort to reduce carbon emissions. Thermochemical energy storage (TCES) is a favorable alternative to fossil fuel energy systems and a promising solution to the intermittency problem of renewable energy sources (such as solar energy). TCES stores energy in the form of chemical bonds using reversible redox reactions (such as manganese metal oxides). This study developed manganese oxide (Mn2O3) and iron oxide (Fe2O3) with an inert dispersant of silicon dioxide (SiO2) (Mn-Fe-Si) for potential large scale energy storage application. These metal oxides are nontoxic, cheap, and relatively abundant. The materials were prepared with varying metal oxide content using physical mixing in a ball mill, pressure pelletization and calcination at different temperatures. Redox cycle tests were conducted using differential scanning calorimetry combined with thermogravimetric analysis (TGA-DSC). The Mn-Fe-Si materials had higher cyclability and energy release compared to the pure metal oxides and manganese oxide with SiO2. The calcination temperature had a significant effect on releasable energy due to the interactions between the oxides. The Mn-Fe-Si mixture calcined at high temperature (1000oC) showed the highest average energy storage density.

Wilkinson, Olivia↗
DOE OSTI2021

Composition and Pressure Effects on Partitioning of Ferrous Iron in Iron-Rich Lower Mantle Heterogeneities

Both seismic observations of dense low shear velocity regions and models of magma ocean crystallization and mantle dynamics support enrichment of iron in Earth’s lowermost mantle. Physical properties of iron-rich lower mantle heterogeneities in the modern Earth depend on distribution of iron between coexisting lower mantle phases (Mg,Fe)O magnesiowüstite, (Mg,Fe)SiO3 bridgmanite, and (Mg,Fe)SiO3 post-perovskite. The partitioning of iron between these phases was investigated in synthetic ferrous-iron-rich olivine compositions (Mg0.55Fe0.45)2SiO4 and (Mg0.28Fe0.72)2SiO4 at lower mantle conditions ranging from 33–128 GPa and 1900–3000 K in the laser-heated diamond anvil cell. The resulting phase assemblages were characterized by a combination of in situ X-ray diffraction and ex situ transmission electron microscopy. The exchange coefficient between bridgmanite and magnesiowüstite decreases with pressure and bulk Fe# and increases with temperature. Thermodynamic modeling determines that incorporation and partitioning of iron in bridgmanite are explained well by excess volume associated with Mg-Fe exchange. Partitioning results are used to model compositions and densities of mantle phase assemblages as a function of pressure, FeO-content and SiO2-content. Unlike average mantle compositions, iron-rich compositions in the mantle exhibit negative dependence of density on SiO2-content at all mantle depths, an important finding for interpretation of deep lower mantle structures.

Dorfman, Susannah M. (ORCID:0000000239689592)↗
NASA NTRS1971

Composition of island arcs and continental growth.

Island arc volcanism has contributed and is still contributing to continental growth, but the composition of island arcs differs from that of the upper continental crust in its lower abundance of Si, K, Rb, Ba, Sr and light rare earth elements. In their advanced stage of evolution, island arcs contain more than 80% of tholeiitic and 15% of ?island arc' calc-alkaline rocks with varied SiO2 contents. The larger proportion of tholeiitic rocks is in the lower crustal levels. The high stratigraphical levels of the island arcs are composed of tholeiitic plus calc-alkaline and/or high potash (shoshonitic) associations with higher abundances of K, Rb, Sr, and Ba. Stratification of the island arc crust is accentuated by another type of calc-alkaline volcanism (Andean type) originating at a late stage of arc evolution, probably by partial melting at the base of the crust. This causes enrichment of the upper crust in K, Rb, Ba and REE and accounts for upper crustal abundances of these elements as well as of SiO2.

Jakes, P.↗
NASA NTRS1973

Analysis of the ultrafine fraction of the Apollo 14 regolith

Analyses were obtained on more than 2400 randomly selected particles from the sub-37 micron (ultrafine) fraction of ten Apollo 14 regolith samples. The analyses were conducted with an energy dispersive electron microprobe system. The semiquantitative data were used to group the particles into ten categories. The pyroxene/plagioclase and olivine/plagioclase ratios are inconsistent with those ratios in the Apollo 14 breccias and rocks. The data suggest that fragmented basalts similar to Apollo 12 olivine basalts may have made significant contributions to the ultrafine fraction of the Fra Mauro regolith. Among a number of unusual particles encountered are brown, birefringent lath-shaped grains with 60 wt % SiO2 and 34 wt % FeO(FeSi2O5) and a glass with 20 to 25 wt % CaO, 0 to 8 wt % MgO, 40 to 45 wt % Al2O3 and approximately 30 wt % SiO2.

Finkelman, R. B.↗
NASA NTRS1974

Descartes Mountains and Cayley Plains - Composition and provenance

Trace element compositions of petrographically characterized 2-4 mm lithic fragments from Apollo 16 soil samples are used to calculate initial REE concentrations in liquids in equilibrium with lunar anorthosites and to discuss the provenance of the Cayley Formation. Lithic fragments may be subdivided into four groups: (1) ANT rocks, (2) K- and SiO2-rich mesostasis-bearing rocks, (3) poikiloblastic rocks, and (4) (spinel) troctolites. Model liquids in equilibrium with essentially monominerallic anorthosites have initial REE concentrations 5-8 times those of chondrites. The REE contents of K- and SiO2-rich mesostasis-bearing rocks and poikiloblastic rocks are dominated by the mesostasis phases. ANT rocks appear to be more abundant in the Descartes Mountains, while poikiloblastic rocks appear to be more abundant in the Cayley Plains. Poikiloblastic rocks have intermediate to high LIL-element concentrations yet the low gamma-ray activity of Mare Orientale implies low LIL-element concentrations. Consequently, it is unlikely that the Cayley Formation is Orientale ejecta. A local origin as ejecta from smaller impacts is a more plausible model for the deposition of the Cayley Formation.

Drake, M. J.↗
NASA NTRS1976

Magnetoresistance and noise properties of chevron stretcher detectors for field access bubble domain devices

Experiments were devised to study the angular variation of the resistance and noise properties of one- and two-level chevron stretcher magnetoresistive detectors for use in field access bubble memory devices. All measurements, made with an electronic system, were performed on glass or garnet samples upon which 1 micron of SiO2 was sputter-deposited, followed by 4000 A of Permalloy for the 28-micron-period devices and 0.8 microns of SiO2, followed by 3000 A of Permalloy for the 20-micron-period devices. The geometrical and drive-state dependence of the zero-state noise were studied, as was its frequency dependence. It is found that both types of detectors operate primarily in the amplitude-shift mode for drive fields of interest and that the presence of a bubble in a detector causes a magnetoresistance change equal to that produced by increasing the in-plane drive field about 8 Oe in the absence of a bubble.

George, P. K.↗
NASA NTRS1978

Determination of the pure silicon monocarbide content of silicon carbide and products based on silicon carbide

Experience has shown that different methods of analysis of SiC products give different results. Methods identified as AFNOR, FEPA, and manufacturer P, currently used to detect SiC, free C, free Si, free Fe, and SiO2 are reviewed. The AFNOR method gives lower SiC content, attributed to destruction of SiC by grinding. Two products sent to independent labs for analysis by the AFNOR and FEPA methods showed somewhat different results, especially for SiC, SiO2, and Al2O3 content, whereas an X-ray analysis showed a SiC content approximately 10 points lower than by chemical methods.

Prost, L.↗
NASA NTRS1977

Pressureless sintered beta prime-Si3N4 solid solution: Fabrication, microstructure, and strength

Si3N4, AlN, and Al2O3 were used as basic constituents in a study of the pressureless sintering of beta prime-Si3N4 solid solution as a function of temperature. Y2O3-SiO2 additions were used to promote liquid-phase sintering. The sintered specimens were characterized with respect to density, microstructure, strength, oxidation, and thermal shock resistance. Density greater than 98 percent of theoretical was achieved by pressureless sintering at 1750 C. The microstructure consisted essentially of fine-grained beta prime-Si3N4 solid solution as the major phase. Modulus of rupture strengths up to 483 MPa were achieved at moderate temperature (1000 C), but decreased to 228 MPa at 1380 C. This substantial strength loss was attributed to a glassy grain boundary phase formed during cooling from the sintering temperature. The best oxidation resistance was exhibited by a composition containing 3 mol % Y2O3-SiO2 additives. Water quench thermal shock resistance was equivalent to that of reaction sintered silicon nitride but lower than hot-pressed silicon nitride.

Dutta, S.↗
NASA NTRS1977

Annual Conference on Nuclear and Space Radiation Effects, 14th, College of William and Mary, Williamsburg, Va., July 12-15, 1977, Proceedings

Topics related to processing and hardness assurance are considered, taking into account the radiation hardening of CMOS technologies, technological advances in the manufacture of radiation-hardened CMOS integrated circuits, CMOS hardness assurance through process controls and optimized design procedures, the application of operational amplifiers to hardened systems, a hard off-the-shelf SG1524 pulse width modulator, and the gamma-induced voltage breakdown anomaly in a Schottky diode. Basic mechanisms are examined, giving attention to chemical and structural aspects of the irradiation behavior of SiO2 films on silicon, experimental observations of the chemistry of the SiO2/Si interface, leakage current phenomena in irradiated SOS devices, the avalanche injection of holes into SiO2, the low-temperature radiation response of Al2O3 gate insulators, and neutron damage mechanisms in silicon at 10 K. Other subjects discussed are related to radiation effects in devices and circuits, space radiation effects, and aspects of simulation, energy deposition, and dosimetry.

Stahl, R. H.↗