Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SUMMER PROGRAM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Flight test measurements and analysis of sonic boom phenomena near the shock wave extremity

A NASA flight test program conducted during the summer and fall of 1970 was devoted to investigating sonic boom phenomena near caustics formed by steady flight near the threshold Mach number, during accelerations, and at the lateral extremes of the ground carpet. The vertical extent of the shock waves attached to near-sonic airplanes was also studied. The flights were conducted over the 1500 ft instrumented BREN tower so that vertical surveys through the shock waves were measured. These data on caustic phenomena near the shock wave extremity were analyzed in detail and compared with theoretical results. Amplifications of shock wave strength varied from 2 to 5 during longitudinal accelerations, from 1 to 1.8 during steady threshold Mach number flight, and up to 3 for small inadvertent accelerations during flight near the threshold Mach number.

Haglund, G. T.↗

Evaluation and analysis of the orbital maneuvering vehicle video system

The work accomplished in the summer of 1989 in association with the NASA/ASEE Summer Faculty Research Fellowship Program at Marshall Space Flight Center is summarized. The task involved study of the Orbital Maneuvering Vehicle (OMV) Video Compression Scheme. This included such activities as reviewing the expected scenes to be compressed by the flight vehicle, learning the error characteristics of the communication channel, monitoring the CLASS tests, and assisting in development of test procedures and interface hardware for the bit error rate lab being developed at MSFC to test the VCU/VRU. Numerous comments and suggestions were made during the course of the fellowship period regarding the design and testing of the OMV Video System. Unfortunately from a technical point of view, the program appears at this point in time to be trouble from an expense prospective and is in fact in danger of being scaled back, if not cancelled altogether. This makes technical improvements prohibitive and cost-reduction measures necessary. Fortunately some cost-reduction possibilities and some significant technical improvements that should cost very little were identified.

Moorhead, Robert J., II↗

Marshall Avionics Testbed System (MAST)

Work accomplished in the summer of 1989 in association with the NASA/ASEE Summer Faculty Research Fellowship Program at Marshall Space Flight Center is summarized. The project was aimed at developing detailed specifications for the Marshall Avionics System Testbed (MAST). This activity was to include the definition of the testbed requirements and the development of specifications for a set of standard network nodes for connecting the testbed to a variety of networks. The project was also to include developing a timetable for the design, implementation, programming and testing of the testbed. Specifications of both hardware and software components for the system were to be included.

Smith, Wayne D.↗

Multisatellite constellation configuration selection for multiregional highly elliptical orbit constellations

The Archimedes Project is a joint effort of the European Space Agency (ESA) and the National Space Development Agency of Japan (NASDA). The primary goal of the Archimedes project is to perform a technical feasibility analysis and preliminary design of a highly inclined multisatellite constellation for direct broadcast and mobile communications services for Europe, Japan and much of North America. This report addresses one aspect of this project, specifically an analysis of continuous satellite coverage using multiregional highly elliptical orbits (M-HEO's). The analysis methodology and ensuing software tool, named SPIFF, were developed specifically for this project by the author during the summer of 1992 under the STA/NSF Summer Institute in Japan Program at Tsukuba Space Center.

Matossian, Mark G.↗

The Meteoritical Bulletin, no. 76, 1994 January: The U.S. Antarctic Meteoritie Collection

The Meteoritical Bulletin number 76 contains a list of all classified meteorites collected by the United States' Antarctic meteroite program as of the summer of 1993. The compilation includes available information on classification, mass, weathering, olivine and pyroxene composition, Al-26 activities, natural thermoluminescence levels, pairing, collection location and references to published descriptions for 5537 meteorite specimens. A list of the properties of metallic meteorites and a list of the most significant meteorites by class are also included.

Grossman, Jeffrey N.↗

A Numerical Study of Hypersonic Fuel Injectors

The work conducted during the Summer of 1995 for the Langley Aerospace Research Summer Scholars, or LARSS, Program was a continuation of Master's Degree work being conducted for the Mechanical Engineering Department at Old Dominion University. Since this work is not yet complete, an update of progress is provided here along with a generalized background. The main emphasis of this research is to find predicted correlations in the database generated by the SHIP3D code, which modeled different scramjet combustor configurations.

Bush, Jason G.↗

VentureStar(trademark) Reaping the Benefits of the X-33 Program

Major X-33 flight hardware has been delivered, and assembly of the vehicle is well underway in anticipation of its flight test program commencing in the summer of 1999. Attention has now turned to the operational VentureStar(trademark), the first single-stage-to-orbit (SSTO) reusable launch vehicle. Activities are grouped under two broad categories: (1) vehicle development and (2) market/business planning, each of which is discussed. The mission concept is presented for direct payload delivery to the International Space Station and to low Earth orbit, as well as payload delivery with an upper stage to Geosynchronous Transfer Orbit (GTO) and other high energy orbits. System requirements include flight segment and ground segment. Vehicle system sizing and design status is provided including the application of X-33 traceability and lessons learned. Technology applications to the VentureStar(trademark) are described including the structure, propellant tanks, thermal protection system, aerodynamics, subsystems, payload bay and propulsion. Developing a market driven low cost launch services system for the 21 st Century requires traditional and non-traditional ways of being able to forecast the evolution of the potential market. The challenge is balancing both the technical and financial assumptions of the market. This involves the need to provide a capability to meet market segments that in some cases are very speculative, while at the same time providing the financial community with a credible revenue stream.

Sumrall, J.↗

Particulate Characterization of Commercial Jet Engine Emissions at Cruise

This NASA Langley grant NLPN 94-5 supported UMR/CASI's participation: (1) in the European Commissions research program POLINAT during its summer campaign in 1995, and (2) in the NASA flight campaign SUCCESS in the spring and early summer of 1996. The successful completion of these grants is evidenced by the publications that have resulted from this work.

Hagen, Donald E.↗

X-33, Leading the Way to VentureStar(trademark)) in the Next Millennium

The X-33, NASA's flagship for reusable space plane technology demonstration, is on course to begin the flights of the X-33 that will permit industry and government decisions that can lead to VentureStar(trademark) by the end of 2000. Lockheed Martin, NASA's partner in this effort, took the bold step in January 1999 to announce formation of VentureStar(trademark) LLC. This move provides the focus for firm business planning needed to enable the decision by the time X-33 flies in mid 2000. The X-33 program began by accepting the mandate that included two unprecedented and highly challenging goals: 1) demonstrate single stage to orbit technologies in flight and ground by the end of 2000 and 2) demonstrate a new government and industry management relationship working together with industry in the lead. Since the IAF 49th Congress in Melbourne, the major hardware elements of X-33 have been through their assembly and test. The flight liquid oxygen tank was the first major element to complete final assembly. The liquid hydrogen tanks are currently in final assembly and testing. The first flight tank has been delivered to vehicle assembly, the second tank and the flight engines are expected this month. The aerospike engine is an engine concept that has never been flown, but has been extensively ground tested. It will be flown for the first time on the X-33. Major X-33 flight hardware has been tested, delivered, and assembly of the vehicle is nearly complete. Construction of the prototype spaceport was completed in November 1998. The flight test program commencing in the summer of 2000. The decision to proceed with a Single Stage To Orbit as a commercial venture is expected in the fall of 2000.

Austin, Robert E.↗

Plumes and Blooms: Observations, Analysis and Modeling for SIMBIOS

The goal of the Plumes and Blooms (PnB) project is to develop, validate and apply to imagery state-of-theart ocean color algorithms for quantifying sediment plumes and phytoplankton blooms for the Case I1 environment of the Santa Barbara Channel. We conduct monthly to twice-monthly transect observations across the Santa Barbara Channel to develop an algorithm development and product validation data set. The PnB field program started in the summer of 1996. At each of the 7 PnB stations, a complete verification bio-geo-optical data set is collected. Included are redundant measures of apparent optical properties (remote sensing reflectance and diffuse attenuation spectra), as well as in situ profiles of spectral absorption, beam attenuation and backscattering coefficients. Water samples are analyzed for component in vivo absorption spectra, fluorometric chlorophyll, phytoplankton pigment (by the SDSU CHORS laboratory), and inorganic nutrient concentrations (Table 1). A primary goal is to use the PnB field data set to objectively tune semi-analytical models of ocean color for this site and apply them using available satellite imagery (SeaWiFS and MODIS). In support of this goal, we have also been addressing SeaWiFS ocean color and AVHRR SST imagery (Otero and Siegel, 2003). We also are using the PnB data set to address time/space variability of water masses in the Santa Barbara Channel and its relationship to the 1997/1998 El Niiio. However, the comparison between PnB field observations and satellite estimates of primary products has been disappointing. We find that field estimates of water-leaving radiance, LwN(h), correspond poorly to satellite estimates for both SeaWiFS and MODIS local area coverage imagery. We believe this is due to poor atmospheric correction due to complex mixtures of aerosol types found in these near-coastal regions. Last, we remain active in outreach activities.

Siegel, D. A.↗

Plumes and Blooms: Modeling the Case II Waters of the Santa Barbara Channel

The goal of the Plumes and Blooms (PnB) project is to develop, validate and apply to imagery state-of-the-art ocean color algorithms for quantifying sediment plumes and phytoplankton blooms for the Case II environment of the Santa Barbara Channel. We conduct monthly to twice-monthly transect observations across the Santa Barbara Channel to develop an algorithm development and product validation data set. The PnB field program started in the summer of 1996. At each of the 7 PnB stations, a complete verification bio-geo-optical data set is collected. Included are redundant measures of apparent optical properties (remote sensing reflectance and diffuse attenuation spectra), as well as in situ profiles of spectral absorption, beam attenuation and backscattering coefficients. Water samples are analyzed for component in vivo absorption spectra, fluorometric chlorophyll, phytoplankton pigment (by the SDSU CHORS laboratory), and inorganic nutrient concentrations. A primary goal is to use the PnB field data set to objectively tune semi-analytical models of ocean color for this site and apply them using available satellite imagery (SeaWiFS and MODIS). In support of this goal, we have also been addressing SeaWiFS ocean color and AVHRR SST imagery. We also are using the PnB data set to address time/space variability of water masses in the Santa Barbara Channel and its relationship to the 1997/1998 El Nino. However, the comparison between PnB field observations and satellite estimates of primary products has been disappointing. We find that field estimates of water-leaving radiance, L(sub wN)(lambda), correspond poorly to satellite estimates for both SeaWiFS and MODIS local area coverage imagery. We believe this is due to poor atmospheric correction due to complex mixtures of aerosol types found in these near-coastal regions. Last, we remain active in outreach activities.

Siegel, D. A.↗

Constructing an Educational Mars Simulation

Working in the Educational Programs Office, my task this summer is to model a 3D habitat that will be part of a future Mars base. With the President's charge to further explore mars by way of robotic-led and human-led missions, there has been a surge in the activity regarding the "red planet". Since all present designs are merely conjecture, I have some creative freedom in deciding what the habitat will look like. To get ideas for what a Mars habitat might be like, I looked at several references including websites and NASA documents. One of these was a NASA Technical Memorandum about Space Transportation Systems that I looked at to get insight on spaceship design. Information about the planet's environment, such as the gravity and the weather, is useful as well when designing the structure. The main software that I am using is Lightwave 3D and Modeler 7.5 that comes along with it. Lightwave is very complex in that it lets you model, surface, and animate so there was a lot to learn. To learn the software I watched a series of instructional videos, looked at online tutorials, and referenced several books. Modeling is like shaping clay with a computer. Every item modeled is made of smaller shapes called polygons. For example, each side of a box would be a different polygon. Modelers must be careful to design with users' systems in mind. Having a model made with too many polygons can slow down a walk-through, but it usually improves the small details on a model. Getting speed and quality proved tricky. An important thing for me to remember when modeling the habitat was to save space. Also, I must consider that technology in the future will be much different than now, so I must be especially creative. My project will be used in an educational walkthough simulation in which users can interact with the environment. I worked closely with intern Stephen Henke who built a Mars Rover, terrain and programmed code for the simulation. This summer's project will help me with future aspirations in computer graphics. Modeling is a valuable skill that I appreciate having the chance to learn and practice.

Henke, Stephen A.↗

NASA/State Education Cooperation

NASA is cooperating with state departments of education in a number of special education programs. An example is Maryland Summer Centers for Gifted and Talented Students sponsored by the Maryland State Department of Education. Some 2,600 students participated in the 1990 program. One of the 12 centers is the Center for Space Science and Technology at Goddard Space Flight Center, which provides instruction to students of the 9-12 grade level. This center is operated by a three organization partnership that includes the Maryland State Department of Education, the University of Maryland and Goddard Space Flight Center, which hosts the instructional program and provides volunteer scientists and engineers as instructors. Typical two-week space intern program includes panel discussions, lectures, tours, field trips and hands-on activity focusing on various space science topics. Senior high students benefit from a one-to-one mentor relationship with a volunteer scientist or engineer. Another example was the Paducah (Kentucky) NASA Community Involvement Project, a joint educational effort of Langley and Lewis Research Centers, Marshall Space Flight Center, the Kentucky Department of Education, the City of Paducah and Paducah Independent Schools. It was a 16 day exposition/symposium featuring seminars on space subjects.

Source record↗

Engineering Internship Program Report

Towards the end of the summer, I prepared for a presentation to the chief of the Flight Crew Support Division to obtain funding for Phase 1 of the project. I presented information on the tracking systems, David Ray presented on the POGO and PABF and the integration of the virtual reality systems, and Mike Van Chau talked about other hardware issues such as head-mounted display, 3-D sound, gloves, graphics platforms, and other peripherals. The funding was approved, and work was to begin at the end of August in evaluating a couple of the tracking systems, to integrate the graphics platform and video equipment with the POGO, and to build a larger gantry for the POGO. This tour I learned how to effectively gather information and present them in a convincible form to gain funding. I explored a entirely new area of technology, that being virtual reality from the most general form down to finer details in its tracking systems. The experiences over the summer have added a lot of detail to work at the Johnson Space Center, life within NASA, and to the many possibilities for becoming involved with the space program.

Bosch, Brian Y.↗

Colorado Lightning Mapping Array Collaborations through the GOES-R Visiting Scientist Program

For the past two years, the GOES‐R Proving Ground has solicited proposals for its Visiting Scientist Program. NASA's Short‐term Prediction Research and Transition (SPoRT) Center has used this opportunity to support the GOES‐R Proving Ground by expanding SPoRT's total lightning collaborations. In 2012, this expanded the evaluation of SPoRT's pseudo‐geostationary lightning mapper product to the Aviation Weather Center and Storm Prediction Center. This year, SPoRT has collaborated with the Colorado Lightning Mapping Array (COLMA) and potential end users. In particular, SPoRT is collaborating with the Cooperative Institute for Research in the Atmosphere (CIRA) and Colorado State University (CSU) to obtain these data in real‐time. From there, SPoRT is supporting the transition of these data to the local forecast offices in Boulder, Colorado and Cheyenne, Wyoming as well as to Proving Ground projects (e.g., the Hazardous Weather Testbed's Spring Program and Aviation Weather Center's Summer Experiment). This presentation will focus on the results of this particular Visiting Scientist Program trip. In particular, the COLMA data are being provided to both forecast offices for initial familiarization. Additionally, several forecast issues have been highlighted as important uses for COLMA data in the operational environment. These include the utility of these data for fire weather situations, situational awareness for both severe weather and lightning safety, and formal evaluations to take place in the spring of 2014.

Stano, Geoffrey T.↗

CaTs Lab (CHAOS and Thermal Sciences Laboratory)

The CHAOS and Thermal Sciences Laboratory (CaTs) at James Madison University evolved into a noteworthy effort to increase minority representation in the sciences and mathematics. Serving ten students and faculty directly, and nearly 50 students indirectly, CaTs, through recruitment efforts, workshops, mentoring programs, tutorial services and research and computational laboratories, fulfilled its intent to initiate an academically enriched research program aimed at strengthening the academic and self-actualization skills of undergraduate students with potential to pursue doctoral study in the sciences. The stated goal of the program was to increase by 5% the number of enrolled mathematics and science students into the program. Success far exceeded the program goals by producing 100% graduation rate of all supported recipients during its tenure, with 30% of the students subsequently in pursuit of graduate degrees. Student retention in the program exceeded 90% and faculty participation exceeded the three members involved in mentoring and tutoring, gaining multi-disciplinary support. Aggressive marketing of the program resulted in several paid summer internships and commitments from NASA and an ongoing relationship with CHROME, a nationally recognized organization which focuses on developing minority students in the sciences and mathematics. Success of the program was only limited by the limited fiscal resources at NASA which resulted in phasing out of the program.

Teate, Anthony A.↗