Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “STYRENE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Self-Assembly and Post-Fabrication Functionalization of Microphase Separated Thin Films of a Reactive Azlactone-Containing Block Copolymer

We report on the thin film self-assembly and post-fabrication functionalization of cylinder-forming poly(styrene-block-2-vinyl-4,4-dimethylazlactone) (PS-b-PVDMA) block copolymers (BCPs). Thermal annealing of an asymmetric BCP composition, to drive microphase separation in thin films, results in high defect densities and poor long-range order. Using FTIR spectroscopy and ellipsometry, we demonstrate that thermal annealing results in reactions between the azlactone groups and the underlying substrate leading to BCP “pinning”. Further, we demonstrate that solvent annealing circumvents these issues and drives high fidelity microphase separation of the BCP in thin films. The solvent annealing approach also enables control over domain orientation; we show that parallel and perpendicularly oriented cylinders with diameters of 11.7 ± 1.2 nm and a center-to-center distance of 25.2 ± 2.6 nm can be obtained using a BCP with M n = 29.5 kDa and f S = 0.75. The PVDMA segments in these self-assembled thin films remain available for reaction with primary amine-functionalized nucleophiles. X-ray photoelectron spectroscopy (XPS) depth-profiling reveals that reactions between azlactone groups and incoming amines occur primarily in the top few nanometers of the reactive domains. Finally, we demonstrate that the azlactone groups in both parallel and perpendicularly oriented cylindrical thin films can selectively incorporate trimethylaluminum vapor, which can be subsequently converted into Al 2 O 3 nanowires and nanodots with dimensions of 16 and 12 nm, respectively.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Relationship between Ion Dissociation, Melt Morphology, and Electrochemical Performance of Lithium and Magnesium Single-Ion Conducting Block Copolymers

Single-ion conducting block copolymers, such as poly(ethylene oxide)-b-poly[(styrene-4-sulfonyltrifluoromethylsulfonyl)imide lithium] (PEO-P[(STFSI)Li]), represent an exciting new class of materials capable of improving the performance of solid-state batteries with metal anodes. In this work, we report on the synthesis and characterization of a matched set of lithiated (PEO-P[(STFSI)Li]) and magnesiated (PEO-P[(STFSI) 2 Mg]) single-ion conducting diblock copolymers. We measure the temperature dependence of ionic conductivity, and through analysis using the Vogel-Tamman-Fulcher (VTF) relation, demonstrate that ion dissociation is significantly lower for all PEO-P[(STFSI) 2 Mg] samples when compared to their PEO-P[(STFSI)Li] counterparts. The VTF parameter characterizing the activation barrier to ion hopping was similar for both cations, but the VTF prefactor that reflects effective charge carrier concentration was higher in the lithiated samples by an order of magnitude. We study the melt morphology of the single-ion conducting block copolymers using temperature-dependent X-ray scattering and use the mean-field theory of Leibler to extract the effective Flory-Huggins interaction parameter (χ) for PEO/P[(STFSI)Li] and PEO/P[(STFSI) 2 Mg] from the X-ray scattering data. Lastly, we demonstrate a linear relationship between the charge-concentration-related VTF parameter and the parameter quantifying the enthalpic contribution to χ. It is evident that ion dissociation and block copolymer thermodynamics are intimately coupled; ion dissociation in these systems suppresses microphase separation.

36 MATERIALS SCIENCE↗

2-Isopropenyl-2-oxazoline: Well-Defined Homopolymers and Block Copolymers via Living Anionic Polymerization

Poly(2-isopropenyl-2-oxazoline) (PIPOx) has drawn significant attention for numerous applications. However, the successful living anionic polymerization of 2-isopropenyl-2-oxazoline has not been reported previously. In this paper, we describe how well-defined PIPOx with quantitative yields, controlled molecular weights from 6800 to over 100 000 g/mol and low polydispersity indices (PDI ≤ 1.17) were synthesized successfully via living anionic polymerization using diphenylmethylpotassium/diethylzinc (DPM-K/Et 2 Zn) in tetrahydrofuran (THF) at 0 °C. In particular, we report the precise synthesis of well-defined PIPOx with the highest molecular weight ever reported (over 100 000 g/mol) and low PDI of 1.17. The resulting polymers were characterized by 1 H and 13 C nuclear magnetic resonance spectroscopy (NMR) along with size exclusion chromatography (SEC). Additionally, the reactivity of living PIPOx was investigated by crossover block copolymerization with styrene (St), 2-vinylpyridine (2VP), and methyl methacrylate (MMA). It was found that the nucleophilicity of living PIPOx is of this order: living PS > living P2VP > living PMMA > living PIPOx. The self-assembly behavior in bulk of PIPOx-b-PS-b-PIPOx triblock copolymers having different block ratios of 10:80:10 and 25:50:25 was studied using transmission electron microscopy (TEM). Finally, the formation of spherical and lamellar nanostructures, respectively, was observed.

2-isopropenyl-2-oxazoline↗

Morphological Consequences of Frustration in ABC Triblock Polymers

In this work, three poly(styrene)-block-poly(isoprene)-block-poly(lactide) (PS-b-PI-b-PLA, SIL) triblock terpolymers were synthesized and characterized in the bulk and as thin films. The pronounced incompatibility of the covalently connected PI and PLA led to significant frustration and the tendency to minimize their intermaterial dividing surface area. This resulted in the formation of a core–shell cylinder morphology with exaggerated nonconstant mean curvature from triblock polymers with equal block volume fractions rather than the more typical lamellar morphology. The effect of frustration was magnified in thin films by both confinement and interfacial interactions such that the PI domains became discontinuous. Self-consistent field theory (SCFT) calculations emphasize that the marked difference in the PS/PI and PI/PLA interaction parameters promotes the formation of nonlamellar morphologies. However, SCFT predicts that lamellar morphology is more stable than the observed cylindrical morphology, demonstrating a limitation that arises from the underlying assumptions.

36 MATERIALS SCIENCE↗

Dependence of Morphology, Shear Modulus, and Conductivity on the Composition of Lithiated and Magnesiated Single-Ion-Conducting Block Copolymer Electrolytes

Single-ion-conducting block copolymers are of considerable interest as electrolytes for battery systems, as they eliminate overpotentials due to concentration gradients. In this study, we characterize a library of poly(ethylene oxide) (PEO)-based diblock copolymers where the second block is poly(styrene-4-sulfonyltrifluoromethylsulfonyl)imide with either cation: univalent lithium or divalent magnesium counterions (PEO-PSLiTFSI or PEO-P[(STFSI) 2 Mg]). The PEO chain length is held fixed in this study. Polymers were synthesized in matched pairs that were identical in all aspects except for the identity of the counterion. Using rheology, SAXS, DSC, and AC impedance spectroscopy, we show that the dependence of morphology, modulus, and conductivity on composition in these charged copolymer systems is fundamentally different from uncharged block copolymers. At a given frequency and temperature, the shear moduli of the magnesiated copolymer systems were approximately 3-4 orders of magnitude higher than those of the matched lithiated pair. The shear moduli of all of the lithiated copolymers showed liquid-like rheological features while the magnesiated copolymers did not. All of the lithiated copolymers were completely disordered (homogeneous), consistent with the observed rheological properties. As expected, the moduli of the lithiated copolymers increased with increasing volume fraction of the ion-containing block (Φ PSTFSI ), and the conductivity decreased with Φ PSTFSI . However, the magnesiated copolymers followed a distinct trend. We show that this was due to the presence of microphase separation in the regime 0.21 ≤ Φ PSTFSI ≤ 0.36, and the tendency for microphase separation became weaker with increasing Φ PSTFSI . In conclusion, the magnesiated copolymer with Φ PSTFSI = 0.38 was homogeneous. The morphological, rheological, and conductivity properties of these systems are governed by the affinity of the cations for PEO chains; homogeneous systems are obtained when the cations migrate from the ion-containing block to PEO.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structural Dynamics of Strongly Segregated Block Copolymer Electrolytes

Polymer electrolytes are promising materials for high energy density rechargeable batteries. However, they have low ion transport rates and gradually lose electrode adhesion during cycling. These effects are dependent on polymer structure and dynamics. This motivates an investigation of diblock copolymer electrolyte dynamics. Structural and stress relaxations have been measured with X-ray photon correlation spectroscopy (XPCS) and rheology, respectively, as a function of salt concentration and temperature. The polymer electrolyte studied in this work is a mixture of poly(styrene-b-ethylene oxide), SEO, and lithium bistrifluoromethanesulfonimide (LiTFSI). Results from XPCS experiments showed hyperdiffusive motion for various lithium salt concentrations and at varying temperatures, which is indicative of soft glassy materials. This behavior is attributed to cooperative dynamics. The decay time was a weak, nonmonotonic function of salt concentration and decreased with increasing temperature, in an Arrhenius fashion. In contrast, the shear modulus decreased with increasing salt concentration and increasing temperature. The entanglement relaxation from rheological measurements followed Vogel-Fulcher-Tammann behavior. The structural decay time was slower than the entanglement relaxation time at temperatures above the glass transition temperature, but they were approximately equal at T g regardless of salt concentration. This may indicate a fundamental connection between cooperative structural motion and polymer chain motion in this material.

25 ENERGY STORAGE↗

Effect of Corona Block Length on the Structure and Chain Exchange Kinetics of Block Copolymer Micelles

The effect of corona block length on micelle structure and molecular chain exchange kinetics has been investigated for a series of dilute poly(styrene)-b-poly(ethylene-alt-propylene) (SEP) diblock copolymer micelles with constant PS core block length ($\langle$N core $\rangle$ ≈ 255) but different PEP corona block lengths (($\langle$N corona $\rangle$ = 256–2080), using a combination of dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and time-resolved small-angle neutron scattering (TR-SANS). Smaller core radii and aggregation numbers, but significantly thicker corona layers (proportional to N corona 0.7 ), were observed with increasing corona block length. Furthermore, 2 orders of magnitude more rapid chain exchange was observed in SEP micelles with the longest corona block compared to the shortest. This effect is attributed to the entropic gain arising from the relief of corona chain stretching upon chain expulsion. We further extend a previous theoretical model by explicitly including a corona term associated with the entropy change in the chain exchange process, which successfully explains the influence of the corona blocks on chain exchange. Our results are in excellent agreement with simulation results of Li and Dormidontova but are apparently contradictory with Halperin and Alexander’s theory for hairy micelles and with experimental observations in two other systems that the exchange kinetics slow down with increasing corona block length. These discrepancies reveal unanticipated complexity regarding the role of the corona block in chain exchange.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Highly Contrasting Static Charging and Bias Stress Effects in Pentacene Transistors with Polystyrene Heterostructures Incorporating Oxidizable N , N '-Bis(4-methoxyphenyl)aniline Side Chains as Gate Dielectrics

Charge storage and trapping properties of polymer dielectrics govern the charge densities of adjacent semiconductors and greatly influence the on-off switching voltage (threshold voltage, V th ) of organic field-effect transistors (OFETs) when the polymers are used as gate insulators. Intentional charging of polymer dielectrics in OFETs can change V th and affect the bias stress. We describe a chemical design and fabrication protocol to construct multilayer-stack dielectrics for pentacene-based OFETs using different polystyrene (PS)-based polymers in each layer, with oxidizable N,N-bis(4-methoxyphenyl)anilino (TPAOMe)-substituted styrene copolymers in arbitrary vertical positions in the stacks. Thermal, byproduct-free crosslinking of benzocyclobutene subunits provides integrity to the multilayer structure by preventing dissolution of the previous deposited layer. Neutron reflectivity data verified the multilayer morphology. We compared the Vth shift before and after charging the stacks by application of ±100V across 0.5-1 µm total film thicknesses. Bias stress was the dominant effect in bilayer devices with a TPAOMe layer in contact with the pentacene, indicated by the direction of V th shift associated with either polarity of external electric field. In structures with no TPAOMe subunit in contact with the pentacene, when charging with -100V on top of the source and drain electrodes, electron injection from pentacene to dielectric was the major charging mechanism, again consistent with the bias stress direction. When charging with +100V, bilayer devices without TPAOMe showed little change in V th , suggesting there was no bias stress effect or charge injection in these devices for this charging polarity. For the bilayer devices with the TPAOMe layer in the bottom, and the trilayer devices with TPOMe in the middle, when +100V was applied, the V th shifts were opposite those expected from bias stress. Dipole formation or partial ionization of chargeable groups at the interface between the dielectric layers are likely polarization mechanisms in these cases. A simple analytical model supports the plausibility of these mechanisms. This work provides examples of both stabilization and shifting of V th , and therefore controlling charge carrier density, in semiconductors overlying the dielectric multilayers.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Role of Defects in Ion Transport in Block Copolymer Electrolytes

Ion conducting block copolymers can overcome traditional limitations of homopolymer electrolytes by phase separating into nanoarchitectures that can be simultaneously optimized for two or more orthogonal material properties such as high ionic conductivity and mechanical stability. A key challenge in understanding the ion transport properties of these materials is the difficulty of extracting structure-function relationships without having complete knowledge of all nanoscale transport pathways in bulk samples. In this paper, we demonstrate a method for deriving structure-transport relationships for ion conducting block copolymers using thin films and interdigitated electrodes. Well-defined and directly imaged structure in films of poly(styrene)-block-poly(2-vinylpyridine) is controlled using techniques of directed self-assembly then the poly(2-vinylpyridine) is selectively converted into an ion conductor. The ion conductivity is found to be directly proportional to the total number of connected paths between electrodes and the path length. A single defect such as a dislocation anywhere in the path of an ion conducting route disconnects and precludes that pathway from contributing to the conductivity and results in an increase in the dielectric parameter of the film. When all the ion conduction pathways are blocked between electrodes, the conductivity is negligible, 4 orders of magnitude lower compared to a completely connected morphology and the dielectric parameter increases by a factor of 50. Lastly, these results have profound implications for the interpretation, design, and processing of block copolymer electrolytes for applications as ion conducting membranes.

36 MATERIALS SCIENCE↗

Structure of Diisobutylene Maleic Acid Copolymer (DIBMA) and Its Lipid Particle as a “Stealth” Membrane-Mimetic for Membrane Protein Research

The study of membrane proteins remains challenging, especially in a native membrane environment. Recently, major progress has been made using maleic acid copolymers, such as styrene maleic acid, to purify membrane proteins and study them directly with native lipids associated with the membrane. Additional maleic acid copolymers, such as diisobutylene maleic acid (DIBMA) membrane-mimetic systems, are being developed and found to have improved spectroscopic properties and pH stability. We studied DIBMA and its lipid particles in solution to better understand its assembly, without and with the lipids, to provide an insight regarding how to use it in solution for better membrane extraction. Using small-angle neutron and X-ray scattering (SANS/SAXS), we show that DIBMA organizes into structures of different size scales at various concentrations and ionic strengths. The polymer performed reasonably well under most solvent conditions except in very low concentrations and high-salt conditions that could result in limited interaction with lipids. To explore DIBMA lipid particles as a suitable membrane-mimetic system for neutron scattering studies of membrane proteins, we measured and determined the contrast-matching point of DIBMA to be ~12% (v/v) D 2 O — similar to that of most protiated lipid molecules but distinct from that of regular protiated proteins — providing a natural contrast for separating their neutron scattering signals. Using SANS contrast variation, we demonstrated that the scattering from the whole lipid particle can be annihilated. Further, we determined that a well-defined lipid nanodisc structure with DIBMA was contrast-matched. These results demonstrate that the DIBMA lipid particle is an outstanding “stealth” membrane-mimetic for membrane proteins. The results provide a structural framework for understanding the organization and assembly process of the polymer itself and the lipid molecules. Such an understanding is imperative for structural techniques such as cryo-electron microscopy, nuclear magnetic resonance, small-angle scattering, and other biophysical techniques.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Understanding the Influence of Chain Architecture on the Transport Quantities of Polymer Electrolytes with Covalently Bonded Anions

Here, we use a combination of experiments and coarse-grained molecular dynamics simulations to elucidate the structure–property relationships in polymer electrolytes obtained by the copolymerization of poly(vinyl ethylene carbonate─lithium styrene bis(trifluoromethanesulfonyl)imide) or p(VEC-LiSTFSI). Experiments show that the conductivity reduces with increasing anion (i.e., STFSI) fraction on the chain, and the cation transference number (t + ) is found to be dependent on the anion fraction. Furthermore, a significant fraction of unpolymerized VEC monomers are observed. Since it is inherently difficult to experimentally control the chain architecture and the amount of unpolymerized VEC in these systems, we perform coarse-grained molecular dynamics simulations on model polymer systems with different chain architectures to mimic the plausible experimental systems. Specifically, we look at the differences in transference numbers arising from (i) a random copolymer of VEC and STFSI monomers; (ii) a blend of VEC-STFSI copolymer with VEC monomers; and (iii) a ternary blend of the VEC homopolymer, STFSI homopolymers, and VEC monomers. The ternary blend model demonstrates the closest resemblance with the experimental transference numbers and diffusivities. The lithium diffusivity obtained from the coarse-grained models with VEC monomers (plasticizers) is about 1.5 times that of the model without VEC monomers, showing that the plasticizing effect of VEC monomers is modest. We rationalize the experimental observations based on aggregate and cluster analyses obtained from molecular simulations. This work reveals that polymer electrolyte chain architecture and plasticizers can critically influence the transport properties, and these parameters should be considered when designing single ion conducting polymeric electrolytes.

cluster distribution↗

Drying Temperature and Capillarity-Driven Crack Formation in Aqueous Processing of Li-Ion Battery Electrodes

Unlike conventional electrode processing for Li-ion batteries, which uses the expensive and highly toxic organic N -methyl-2-pyrrolidone (NMP) solvent, aqueous processing simply employs deionized water as the solvent. Yet, thick aqueous processed cathodes have been found to crack during drying. Here, the influence of electrode drying temperature and thickness on cracking was investigated. LiNi 1/3 Mn 1/3 Co 1/3 O 2 cathodes prepared with a hydrophilic binder, modified styrene–butadiene rubber (SBR), were coated at various thicknesses and dried at temperatures ranging from 20 to 70 °C. Experiments revealed cracking worsens with increased electrode thickness and elevated drying temperatures. Cracks were formed during the capillarity-driven phase during drying. Strong evaporation and weak diffusion played a critical role in the nonuniform distribution of the inactive phase. Images of electrode surfaces were processed to quantify crack dimensions and crack intensity factor (CIF). The average crack length and width, as well as CIF, increased with drying temperature and electrode thickness. Electrochemical performance revealed a strong and negative correlation between the crack density and performance in terms of specific capacity. Transport limitations associated with the presence of cracks adversely affect the advantage of high volume ratio of active materials in the thick electrodes.

25 ENERGY STORAGE↗

Conductive Thin Films over Large Areas by Supramolecular Self-Assembly

We report a “one-step” method for preparing conductive thin films with cylindrical microdomains oriented normal to the surface over large areas using the supramolecular assembly of poly(styrene-block-4-vinylpyridine) (PS19-b-P4VP 5 ) and 5,10,15,20-tetrakis(4-hydroxyphenyl)-21H,23H-porphine (HOTPP). HOTPP interacts with the P4VP block by hydrogen bonding between the hydroxyl group of HOTPP and pyridine ring of PS 19 -b-P4VP 5 , forming cylindrical P4VP(HOTPP) domains having an average diameter of ~17 nm in a PS matrix. Here, dynamic light scattering, contact angle, and in situ grazing incidence small-angle X-ray scattering measurements show a morphological transition from spherical micelles in solution to cylindrical microdomains oriented normal to the substrate surface during the drying process. From the dependence of current on voltage, an average current of ~4.0 nA is found to pass through a single microdomain, pointing to a promising route for organic semiconductor device applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Assembling Vertical Block Copolymer Nanopores via Solvent Vapor Annealing on Homopolymer-Functionalized Substrates

Utilizing the self-assembly of block copolymers with large Flory–Huggins interaction parameters (χ) for nanofabrication is a formidable challenge due to the attendant large surface energy differences between the blocks. This work reports a robust protocol for the fabrication of thin films with highly ordered cylindrical nanopore arrays via the self-assembly of an asymmetric poly(styrene-block-4-vinylpyridine) (PS-b-P4VP) diblock copolymer blended with a P4VP homopolymer. The desired vertical domain orientation is achieved at the air–polymer interface by controlled solvent vapor annealing (SVA) using acetone, a solvent with weak selectivity for PS over P4VP, and at the substrate interface by functionalization using a hydroxy-terminated poly(2-vinylpyridine) (P2VP-OH) homopolymer brush. In contrast, the vertical cylinder orientation is unstable during acetone SVA on substrates functionalized using hydroxy-terminated poly(methyl methacrylate) (PMMA-OH). Although PMMA exhibits more balanced interfacial energies between PS and P4VP than P2VP in the dry state, it is also swollen more selectively by acetone. We hypothesize that the nearly balanced solvent swelling of the three polymers (P2VP, P4VP, and PS) stabilizes the vertical cylinder orientation, while unbalanced swelling (PMMA > P4VP and PS) does not. Here we further characterize pore formation by addition of a P4VP homopolymer and its postassembly extraction using ethanol, revealing a narrow window of pore size tunability. Notably, minimal differences in nanopore morphologies are observed for P4VP volume fractions as high as 0.1, regardless of the P4VP molar mass. However, further increasing the P4VP volume fraction results in domain reorientation or macrophase separation when its molar mass is less than or greater than the P4VP block molar mass, respectively. Using a P4VP homopolymer that is nearly equal in length to the P4VP block enables the fabrication of well-ordered arrays of vertical, through-film nanopores with high aspect ratios (>10), small periods (<23 nm), and diameters less than 10 nm.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Carboxylated Fullerene at the Oil/Water Interface

The self-assembly of carboxylated fullerene with poly(styrene-b-2-vinylpyridine) (PS-b-P2VP) with different molecular weights, poly-2-vinylpyridine, and amine-terminated polystyrene, at the interface between toluene and water was investigated. For all values of the pH, the functionalized fullerene interacted with the polymers at the water/toluene interface, forming a nanoparticle network, reducing the interfacial tension. At pH values of 4.84 and 7.8, robust, elastic films were formed at the interface, such that hollow tubules could be formed in situ when an aqueous solution of the functionalized fullerene was jetted into a toluene solution of PS-b-P2VP at a pH of 4.84. Lastly, with variation of the pH, the mechanical properties of the fullerene/polymer assemblies can be varied by tuning the strength of the interactions between the functionalized fullerenes and the PS-b-P2VP.

36 MATERIALS SCIENCE↗