SEARCH · Engineering Papers

Results for “SOL”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS2018

Topological Control of Polystyrene-Silica Core-Shell Microspheres

Controllable surface morphology is requisite across a gamut of processes, industries, and applications. The surface morphology of silica-coated polystyrene microspheres was controllably modified to enable generation of both smooth and bumpy, or raspberry-like, surfaces. Although smooth and raspberry-like silica shells on polystyrene templates have been demonstrated extensively, the method described here used readily available materials to produce radical changes in surface morphology from a single polystyrene template coated in silica through a facile sol-gel reaction processes. Silica shells were deposited via a sol-gel process (using tetraethyl orthosilicate as the silica precursor) onto 1 to 2 m diameter anionic polystyrene spheres, fabricated by emulsifier-free polymerization. By varying of the concentration of silica precursor and ammonium hydroxide catalyst and altering the electrostatic surface interactions via addition of a cationic polymeric brush, an array of surface topologies was generated. The resulting silica shells ranged from 100 to 200 nm in thickness, as measured by calcination of the polystyrene template. Empirical relations between reaction conditions and the resulting silica colloid diameter were utilized to understand the resultant silica shell topology. These results may serve as a guide to generate a versatile platform for research in the multitude of applications where polystyrene-silica core-shell particles are utilized.

Zane A. Grady↗

NASA NTRS2019

Mars Exploration Rover Opportunity End of Mission Report

The Mars Exploration Rover (MER) Opportunity landed on Meridiani Planum on 25 January 2004 for a prime mission designed to last three months (90 sols). After more than fourteen years operating on the surface of Mars, the last communication from Opportunity occurred on sol 5111 (10 June, 2018) when a major dust storm reduced power on the solar panels to the point where further communications were not possible. Following the cessation of the dust storm several weeks later, the MER project radiated over 1000 commands to Mars in an attempt to elicit a response from the rover. Attempts were made utilizing the Deep Space Network X-Band and UHF relay via both Mars Odyssey and the Mars Reconnaissance Orbiter. Search and recovery efforts concluded on 12 February, 2019. It is the MER project’s assessment that the environmental window in which it would be most probable to recover Opportunity had passed by that time and that the rover would succumb to the extreme environmental conditions experienced during a winter on Mars. This report summarizes the major science accomplishments throughout the fourteen years of this mission, with a detailed focused on recent science accomplishments during the last extended mission (EM-11). This report also describes the mission engineering accomplishments and specific actions taken during the attempt to recover the vehicle after communications were lost during the major dust storm.

Callas, John L.↗

NASA NTRS2003

Mars orbits with daily repeating ground traces

This paper derives orbits at Mars with ground traces that repeat at the same times every solar day (sol). A relay orbiter in such an orbit would pass over in-situ probes at the same times every sol, ensuring consistent coverage and simplifying mission design and operations. 42 orbits in five dasses are characterized: 14 circular equatorial prograde orbits 14 circular equatorial retrograde orbits 11 circular sun synchronous orbits 2 eccentric equatorial orbits 1 eccentric critically inclined orbit The paper reports on the performance of a relay orbiter in some of the orbits.

Turner, Andrew↗

NASA NTRS2019

Subsurface Cl-bearing salts as potential contributors to recurring slope lineae (RSL) on Mars

We report laboratory experimental results that support a brine-related hypothesis for the recurring slope lineae (RSL) on Mars in which the subsurface Cl-salts, i.e., hydrous chlorides and oxychlorine salts (HyCOS) are the potential source materials. Our experiments revealed that within the observed RSL temperature window TRSL (250–300 K), the deliquescence of HyCOS could occur in relative humidity ranges (RH≥22%–46%) much lower than those for hydrous (Mg, Fe)-sulfates (RH≥75%–96%). In addition, we demonstrated that the RH values kept by common HyCOS and hydrous sulfates in enclosures have a general trend as RH(sulfates) > RH(perchlorates) > RH(chlorides) (with same type of cation) in wide T range. It means that the required RH range for a Cl-bearing salt to deliquescence can be satisfied by a co-existing salt of different type, e.g., in the subsurface layers of mixed salts on Mars. Furthermore, we found a strong temperature dependence of the deliquescence rates for all tested HyCOS, e.g., a duration of 1–5 sols for all HyCOS at the high end (300 K) of TRSL, and of 20–70 sols for all tested HyCOS (except NaClO4·H2O) at the low end (250 K) of TRSL, which is consistent with the observed seasonal behavior of RSL on Mars. From a mass-balance point of view, the currently observed evidences on Mars do not support a fully-brine-wetted track model, thus we suggest a brine-triggered granular-flow model for the most RSL. Considering the recurrence of RSL in consecutive martian years, our experimental results support the rehydration of remnant HyCOS layers during a martian cold season through H2O vapor-to-salt direct interaction. We found that the evidences of HyCOS rehydration under Mars relevant P-T-RH conditions are detectable in a few minutes by in situ Raman spectroscopy. This rehydration would facilitate the recharge of H2O back into subsurface HyCOS, which could serve as the source material to trigger RSL in a subsequent warm season. The major limiting factor for this rehydration is the H2O supply, i.e., the H2O vapor density carried by current Mars atmospheric circulation and the diffusion rate of H2O vapor into the salt-rich subsurface in a cold season. In a worst-case scenario, these H2O supplies can support a maximum increase of hydration degrees of two for totally dehydrated HyCOS, whereas the full rehydration of subsurface HyCOS layers can be easily reached during a>30° obliquity period that has H2O vapor density 10× to 20× times the value of current obliquity. Overall, our results imply the existence of a large amount of Cl-bearing salts in the subsurface at RSL sites.

Alian Wang↗

NASA NTRS2020

Driving Curiosity: Mars Rover Mobility Trends During the First Seven Years

NASA’s Mars Science Laboratory (MSL) mission landed the Curiosity rover on Mars on August 6, 2012. As of August 6, 2019 (sol 2488), Curiosity has driven 21,318.5 meters over a variety of terrain types and slopes, employing multiple drive modes with varying amounts of onboard autonomy. Curiosity’s drive distances each sol have ranged from its shortest drive of 2.6 centimeters to its longest drive of 142.5 meters, with an average drive distance of 28.9 meters. Real-time human intervention during Curiosity drives on Mars is not possible due to the latency in uplinking commands and downlinking telemetry, so the operations team relies on the rover’s flight software to prevent an unsafe state during driving. Over the first seven years of the mission, Curiosity has attempted 738 drives. While 622 drives have completed successfully, 116 drives were prevented or stopped early by the rover’s fault protection software. The primary risks to mobility success have been wheel wear, wheel entrapment, progressive wheel sinkage (which can lead to rover embedding), and terrain interactions or hardware or cabling failures that result in an inability to command one or more steer or drive actuators. In this paper, we describe mobility trends over the first 21.3km of the mission, operational aspects of the mobility fault protection, and risk mitigation strategies that will support continued mobility success for the remainder of the mission.

Rankin, Arturo↗

NASA NTRS2021

Commanding Curiosity from the Couch: MSL Remote Operations, Challenges, and Path Ahead

This paper describes how the Mars ScienceLaboratory (MSL) project prepared for and successfully beganCuriosity rover Mars operations from their homes in responseto the COVID-19 work-from-home orders. In a very shortperiod, the team developed procedures and executed a remoteoperations readiness test in parallel with the team's support fornominal operations. Continuing regular rover operations withan entirely remote team had not previously been consideredfeasible due to a variety of factors. These included both thehuman factors, such as multiple concurrent person-to-personinteractions of the uplink planning team, as well as technicalfactors, such as reliance on powerful workstations dedicated tographically intensive software tools used for planning. The testwas conducted on March 12th, with both the downlink anduplink teams successfully simulating a near full planning day.The JPL administration announced the transition to mandatorytelework on Monday, March 16th. MSL stood down the uplinkplanning originally scheduled for the next day while downlinkcontinued monitoring the rover. Full operations then resumedper schedule with nearly the entire operations team teleworkingon Friday, March 20th, during which the team planned roveractivities for three Martian days (sols). These activities includedthe successful drilling of the "Edinburgh" rock target, a highlycomplex contact science activity.As of October 1st, 2020, the Mars Science Laboratory missionoperations team has conducted 88 remote tactical uplink shiftsfor a total of 190 sols of planned rover activity, which accountsfor more than 6% of the mission to date. In this period the roverhas completed four drilling campaigns and driven over 1150meters towards its next major science target – a sulfate bearinggeologic unit at the foot of Mount Sharp. Success has not beenwithout its challenges. Many of these have been addressed whileothers will remain in some form until the team can safely returnto JPL, which in turn is the largest challenge for the future.

Stroupe, Ashley↗

NASA NTRS2021

Microsphere Plutonium-238 Oxide Fuel to Revolutionize New Radioisotope Power Systems and Heat Sources for Planetary Exploration

Microsphere 238PuO2 fuels have potential to provide performance and safety enhancements for future radioisotope heat and power systems (RPS) as well as enable more flexible and compact RPS designs. Improvements in RPS specific power and more flexible geometries were recently investigated by JPL and PNNL as part of a study on cryobot devices for exploring Ocean Worlds. Missions to penetrate ice and explore oceans, such as on Europa, will require RPS with high specific power within the vehicle to provide both heat and power. Such missions will be mass-constrained, and the energy required to penetrate the ice is highly dependent on cryobot size. Therefore, compact RPS geometries are needed to maximize heat and power while minimizing 238Pu inventory. Microsphere-based heat sources are an attractive way to obtain flexible geometries and high volumetric power loadings because they can fill a region of any size and shape provided fuel temperatures are kept below a threshold and launch/re-entry safety are not compromised. The sol-gel technique to produce 238PuO2 microsphere particles for heat sources has the benefit of preventing dust generation, as opposed to the current 238PuO2 powder/pellet processing method, reducing hazards in the fuel fabrication line. Microspheres can also be individually coated to enhance thermal conductivity, and/or reduce the likelihood of 238PuO2 fuel dispersal in an accident. Although PNNL has produced 238PuO2 microspheres using the sol-gel method, the application of coatings and their integrity over time has yet to be investigated. Continued R&D could demonstrate the feasibility of advanced, microspherebased heat sources and provide baseline data for planning future missions requiring new RPS with different heat source configurations.

Fleurial, Jean-Pierre↗

NASA NTRS2022

First 210 solar days of Mars 2020 Perseverance Robotic Operations – Mobility, Robotic Arm, Sampling, and Helicopter

This paper includes the summary, lessonslearned, and upcoming plans for the first 210 Mars solar days(sols) of the mission. The focus of the paper is on roboticoperations which has the primary responsibility for strategicplanning, uplink commanding and downlink analysis forrover mobility and navigation, robotic arm operation, thesampling and caching capability including coring, theadaptive caching assembly and the 2nd sample handlingrobotic arm, and interface to the Mars helicopter Ingenuity.As of Sol 210 the rover has driven 2663.65 meters, executed20764 robotic arm and sampling commands, and hassuccessfully completed 13 helicopter flights covering 2382meters horizontal distance. It includes the OperationsReadiness Tests in preparation for landing, landing and initialcheckouts, strategic route planning to the science destinationand waypoints, surface checkout of all of the roboticscapability of the rover. It also discusses the strategic planningand tactical agility needed for interleaving scienceinvestigation and technology demonstration of the Marshelicopter flights where a minimum distance had to bemaintained between the rover and helicopter during flights. Itdiscusses the challenges with planning robotic operations andaddressing anomalies with the larger uncertainty presentduring early mission operations. It also discusses the impacton robotic operations from lessons incorporated fromprevious missions.

Ono, Hiro↗

NASA NTRSDate not supplied

Mineralogical Evidence for Environmental Change in the Clay-Sulfate Transition at Gale Crater, Mars

A primary reason for selecting Gale crater as the Mars Science Laboratory (MSL) Curiosity rover landing site was a clear mineralogical transition from Fe/Mg smectite in older strata to hydrated Mg sulfate salts in younger strata observed in orbital visible/shortwave-infrared reflectance data. This transition has been observed in other early-Hesperian terrains on Mars and has been hypothesized to signal a planet-wide change in climate from relatively warm and wet to cold and dry. Curiosity studied the sedimentology and geochemical and mineralogical composition of rocks in this “clay-sulfate transition” region from sols 3052 to 3572 (i.e., March 2021 to August 2022), with arrival at the sulfate unit on sol 3574. Here, we report on the mineralogical measurements made by the CheMin X-ray diffractometer of the six drill targets in the clay-sulfate transition and the first drill target in the sulfate unit. We use compositional data and sedimentological observations to interpret depositional and diagenetic environments and present hypotheses to explain the transition from clay minerals to hydrated Mg sulfates.

E. B. Rampe↗

NASA NTRSDate not supplied

New Mastcam Multispectral Rock Classes in Sulfate-Bearing Strata, Gale Crater, Mars

Orbital data of Gale Crater, Mars has identified a transition in the stratigraphy of Mt. Sharp indicating an environmental change from a wetter one that accommodated clay mineral formation to a drier environment that led to the precipitation of sulfates. Mt. Sharp is not the only location on Mars for which this transition has been observed which suggests a global environmental change around the Noachian-Hesperian transition. Also visible from orbit is a dark-toned marker band that lies within the sulfate-bearing strata hypothesized to be a volcanic ash deposit. The Mars Science Laboratory (MSL) Curiosity rover is currently exploring this region of Mt. Sharp. In-situ analyses by the rover show changes in morphology and chemistry between the sulfate-bearing layers below and above the marker band and the marker band itself. The MSL instrument payload includes the Mast Camera (Mastcam), which collects multispectral images to provide context for other instruments and broad mineralogic interpretations. In addition to mafic Fe-bearing minerals, Mastcam is sensitive to oxides and some hydrated minerals, important indicators of alteration. In our previous work, we compiled a database of Mastcam spectra through Curiosity’s exploration of Vera Rubin ridge (sols 0-2302), from which 9 spectral classes of rocks were identified (Fig. 1D). Each class has diagnostic spectral features that reflect a common mineralogic interpretation. More recently, as Curiosity traversed through the clay-rich region, Glen Torridon (GT), there was some variation in the rock spectral classes potentially due to nontronite and other phyllosilicates, but not enough to warrant new spectral classes (Fig. 1B). We hypothesize that new classes will appear in accordance with sulfate-bearing strata and the marker band, specifically appearing as a ‘downturn’ in the last two wavelength filters that is inherent, but not unique, to polyhydrated Mg-sulfates. Here, we expand upon our analysis of Mastcam multispectral observations through Curiosity’s second encounter with the marker band (up to sol 3672), comparing the spectral diversity within the sulfate-bearing unit and the marker band to the spectral classes encountered previously in the traverse. These analyses will provide a basis for comparison and aid in selecting targets for in-situ investigations as Curiosity continues its ascent of Mt. Sharp.

A M Eng↗

NASA NTRSDate not supplied

Exploring the Jezero Delta Front: Overview of Results From the Mars 2020 Perseverance Rover’s Second Science Campaign

The Perseverance rover landed in Jezero crater on February 18, 2021, with the mission goals to explore the geology, astrobiological potential, and modern environment of the crater floor and delta, and to collect and cache well-documented samples for Mars Sample Return. After completion of the “Crater Floor” science campaign, the rover conducted a rapid traverse (sols 379-414) to the Three Forks region of the crater floor adjacent to the delta front. From here, Perseverance’s second “Delta Front” science campaign (DFC) began on Sol 415, April 20, 2022. The DFC has explored two lobes of the delta front, the neighboring crater floor, and their contact zone, focusing on the lowest geologic exposures composing the Jezero delta (largely mapped within the delta “thin layered unit”). As of January 1, 2023, Perseverance has covered 14325 km of traverse distance and collected 15 rock sample cores, 2 regolith samples, 1 atmospheric sample, and 3 witness tubes, employing a sample pair strategy where each unique sample is paired with a companion sample core from the same location, to enable the construction of two different caches. After sample depot construction at Three Forks, the DFC will conclude upon re-ascent of the delta front, and the next “Delta Top” science campaign will start.

Mars 2020 Mission↗

NASA NTRS2023

Overview and Results From the Mars 2020 Perseverance Rover's First Science Campaign on the Jezero Crater Floor

The Mars 2020 Perseverance rover landed in Jezero crater on 18 February 2021. After a 100-sol period of commissioning and the Ingenuity Helicopter technology demonstration, Perseverance began its first science campaign to explore the enigmatic Jezero crater floor, whose igneous or sedimentary origins have been much debated in the scientific community. This paper describes the campaign plan developed to explore the crater floor's Máaz and Séítah formations and summarizes the results of the campaign between sols 100–379. By the end of the campaign, Perseverance had traversed more than 5 km, created seven abrasion patches, and sealed nine samples and a witness tube. Analysis of remote and proximity science observations show that the Máaz and Séítah formations are igneous in origin and composed of five and two geologic members, respectively. The Séítah formation represents the olivine-rich cumulate formed from differentiation of a slowly cooling melt or magma body, and the Máaz formation likely represents a separate series of lava flows emplaced after Séítah. The Máaz and Séítah rocks also preserve evidence of multiple episodes of aqueous alteration in secondary minerals like carbonate, Fe/Mg phyllosilicates, sulfates, and perchlorate, and surficial coatings. Post-emplacement processes tilted the rocks near the Máaz-Séítah contact and substantial erosion modified the crater floor rocks to their present-day expressions. Results from this crater floor campaign, including those obtained upon return of the collected samples, will help to build the geologic history of events that occurred in Jezero crater and provide time constraints on the formation of the Jezero delta.

Mars 2020↗

NASA NTRS2024

Durable Antifog Coatings for Spacesuit Helmets

Maintaining a high level of visibility through the helmet of NASA Extravehicular Mobility Unit (EMU) is very difficult under inclement operational conditions. The interior of the helmet bubble will fog up in a high humidity / cold environment with high work rate breathing for extravehicular activity (EVA) that can last up to 8 hours. Currently used wipe on antifog solutions have problems with i) durability, requiring reapplication for every EVA, ii) can potentially get in the astronaut’s eye, impairing their vision, and iii) bottles of solution are a consumable that need to be continuously restocked. Luna Labs has developed a durable, transparent coating that is projected to maintain optical and antifogging properties for the lifetime of the equipment. Luna Labs has leveraged our established Gentoo™ sol-gel coating platform to create a robust, transparent, long-lasting, and antifogging coating. Additionally, the proposed sol-gel coating is thin (2-8 µm), low cost (cents/ft 2 ), and easy to apply while providing excellent abrasion durability and antifogging properties. Luna Labs has produced a coating formulation to possess antifogging properties so that moist air will wet out, forming a microscopically thin sheet of water that does not scatter light. A custom superhydrophilic additive which crosslinks into the durable coating matrix provides superb antifogging properties. This non-scratch transparent coating that will provide continuous antifogging efficacy for >8 hours and environmental durability to last the lifetime of coated component. This technology is relevant to NASA spacesuit applications, as well as for automobiles, aircraft, eyewear, SCUBA masks or any other applications that require transparent antifogging properties.

Spacesuit↗

DOE OSTI2021

Colorless luminescent solar concentrators using colloidal semiconductor nanocrystals

Disclosed herein are embodiments of a composition comprising a polymer or sol-gel and one or more nanocrystals. The composition is useful as a luminescent solar concentrator. The nanocrystals are dispersed in the polymer or sol-gel matrix so as to reduce or substantially prevent nanocrystal-to-nanocrystal energy transfer and a subsequent reduction in the emission efficiency of the composition. In some embodiments, the polymer matrix comprises an acrylate polymer. Also disclosed herein is a method for making the composition. Devices comprising the composition are disclosed. In some cases the polymer is the waveguide, in others the polymer is applied as a coating on a waveguide. In some examples, the device is a window.

McDaniel, Hunter↗

DOE OSTI2022

Mitigation of Leakage and Water Ingress for a Promising Phase Change Material (PCM) Containing Polythylene Glycol (PEG): Preprint

A promising and cost-effective phase change material (PCM) containing polyethylene glycol (PEG) 600, 800, and/or 1000 has been synthesized. It is shape stabilized using a sol-gel method and displays promising thermal properties. These properties make the PCMs good candidates for thermal batteries and other thermal energy storage applications in the building sector. However, PEG leakage is observed at elevated temperatures, and due to the hygroscopic nature of PEG, moisture ingress is also observed, which can have a significant effect on performance and durability. Thus, we have developed hydrophobic coatings to prevent PEG leakage and mitigate moisture ingress. The selected approach involves a secondary sol-gel process during which a thin layer formulated with hydrophobic precursors is deposited onto the surface of the PCM samples. Several coating formulations have been investigated, including formulations composed of tetraethyl orthosilicate (TEOS), diethoxy(dimethyl)silane (DEDMS), triethoxymethylsilane (TEMS), and n- octyltriethoxysilane (OTES). We find that this is effective at increasing hydrophobicity of the PCM substrates. It also decreases substrate leakage.

ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATION↗

DOE OSTI2023

Tailoring of pores in aerogels using 3D printed structures

In one embodiment, a method includes acquiring a three-dimensional printed template created using an additive manufacturing technique, infilling the template with an aerogel precursor solution, allowing formation of a sol-gel, and converting the sol-gel to an aerogel. In another embodiment, a product includes an aerogel having inner channels corresponding to outer walls of a three-dimensional printed template around which the aerogel was formed.

Chandrasekaran, Swetha↗

DOE OSTI2023

Methods of making permeable aerogels

Methods of making permeable aerogels (100) can include providing a sol mixture (110) comprising an organic scaffold, an inorganic aerogel precursor, and a first solvent. The organic scaffold can be insoluble in the first solvent. The sol mixture can react to form a gel (120) such that an interconnected channel network is formed which is at least partially defined by the organic scaffold. The first solvent in the gel can be exchanged (130) with a second solvent. The second solvent can dissolve the organic scaffold to expose the interconnected channel network. The gel can be dried (140) to form the permeable aerogel.

Carlson, Krista↗

DOE OSTI2023

Preparation of SiO 2 —TiO 2 composite aerogels and SiO 2 @TiO 2 core-shell aerogels with high thermal stability and enhanced photocatalysis

According to one inventive concept, a method for forming an aerogel includes forming a SiO 2 gel, forming a mixture of the SiO 2 gel and a TiCl 4 -derived precursor sol, wherein the TiCl 4 sol is comprised of TiCl 4 and a solvent, forming a SiO 2 /TiO 2 wet gel, drying the SiO 2 /TiO 2 wet gel, and heating the dried SiO 2 /TiO 2 gel.

Neto, Elias Paiva Ferreira↗