Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “SHADING”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Elevation distributed micro-climatology data in a coastal glaciated watershed

Air temperature, ground temperature and relative humidity data were collected in a longitudinal transect of the Nooksack watershed at varying elevations from 500 to 1800 m above sea level. Data were collected by anchoring sensors from trees above winter snow levels and shaded from direct solar radiation. Paired sensors were also buried 3 cm under ground near each air temperature sensor to determine snow absence or presence. Select sites included relative humidity sensors to indicate whether precipitation was occurring. Data were collected every 3-4 h from December 2015 to Sept 2018 (with ongoing collection). Code for analysis of daily mean, minimum, maximum, and temperature change with elevation (lapse rates) are available on Github (https://doi.org/10.5281/zenodo.3239539). The sensor download and intermediate data products are available on HydroShare at (http://www.hydroshare.org/resource/222e832d3df24dea9bae9bbeb6f4219d) with publicly accessible visualization available from the Nooksack Observatory at data.cuahsi.org. Hydrologic models are generally structured with a single annual average lapse rate parameter which assumes a linear temperature gradient with elevation. The daily data (2016-2018) is used as part of ongoing studies on the non-linear dynamics and temporal variability of temperature with elevation to improve assessments of watershed function and salmon habitat.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2012

Beyond the buildingcentric approach: A vision for an integrated evaluation of sustainable buildings

The available sustainable building evaluation systems have produced a new environmental design paradigm. However, there is an increasing need to overcome the buildingcentric approach of these systems, in order to further exploit their innovate potential for sustainable building practices. The paper takes this challenge by developing a cross-scale evaluation approach focusing on the reliability of sustainable building design solutions for the context in which the building is situated. An integrated building-urban evaluation model is proposed based on the urban matrix, which is a conceptualisation of the built environment as a social-ecological system. The model aims at evaluating the sustainability of a building considering it as an active entity contributing to the resilience of the urban matrix. Few holistic performance indicators are used for evaluating such contribution, so expressing the building reliability. The discussion on the efficacy of the model shows that it works as a heuristic tool, supporting the acquisition of a better insight into the complexity which characterises the relationships between the building and the built environment sustainability. Shading new lights on the meaning of sustainable buildings, the model can play a positive role in innovating sustainable building design practices, thus complementing current evaluation systems. - Highlights: Black-Right-Pointing-Pointer We model an integrated building-urban evaluation approach. Black-Right-Pointing-Pointer The urban matrix represents the social-ecological functioning of the urban context. Black-Right-Pointing-Pointer We introduce the concept of reliability to evaluate sustainable buildings. Black-Right-Pointing-Pointer Holistic indicators express the building reliability. Black-Right-Pointing-Pointer The evaluation model works as heuristic tool and complements other tools.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

An evaluation of the demand response potential of integrated dynamic window and HVAC systems

Demand response (DR) increases the flexibility and reliability of the electricity grid as use of intermittent renewable energy sources increases. HVAC and envelope DR measures present the largest aggregate energy and peak demand savings potential of all commercial building end uses because their net demand savings occur during critical peak demand periods. Controllable envelope measures include switchable electrochromic windows, operable window attachments such as outdoor louvers, roller shades, and awnings, as well as other innovative facade technologies that can modulate both solar heat gain and daylight admission over a broad solar-optical range. This study evaluated the technical potential of DR-enabled dynamic windows to reduce critical peak demand for a prototypical medium office building situated in all 16 U.S. climates. Model predictive control (MPC) algorithms were designed to minimize electricity cost in daylit perimeter office zones through control of an electrochromic window with and without HVAC thermostat setpoint control. Conventional and time-of-use rates were used to shape the degree of DR. Median annual peak demand savings with window and thermostat control across all climate zones were 24.3 kW (4.4 W/m 2 ) per building or 15.9 W/m 2 for non-north perimeter zones. Resource adequacy at the whole building level was estimated to be 13.1 to 43.4 $/kW per year over the 30-year life of the installation. Co-benefits were increased energy efficiency, and reduced electricity cost and emissions. Visual and thermal comfort requirements were met at all times. Dynamic facades controlled by MPC have substantial technical potential for DR across all U.S. climates and warrant serious consideration for inclusion in DR portfolios.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗
DOE OSTI2024

Component-based SHGC determination of BIPV glazing for product comparison

Building-integrated photovoltaic (BIPV) systems are intrinsically designed to generate electricity and to provide at least one building-related function. When BIPV modules act as glazing products in windows, skylights or curtain walls, their ability to control the transmission of solar energy into the building must be characterised by a Solar Heat Gain Coefficient (SHGC) or g value (also known as Total Solar Energy Transmittance – TSET – or “solar factor”). For the comparison of BIPV glazing products consisting of one PV laminate and possibly further, conventional glazing layers separated by gas-filled cavities, the procedures documented in international standards for architectural glazing (e.g. ISO 9050 and EN 410) form a suitable starting point. Easily implemented modifications to these procedures are proposed to take both optical inhomogeneity (if relevant) and extraction of electricity from BIPV glazing units into account. Geometrically complex glazing and shading devices, and light-scattering glazing layers, are outside the scope of the proposed methodology; SHGC determination for obliquely incident solar radiation is also excluded. For these cases, the experimental calorimetric approach documented in [ISO 19467:2017; ISO 19467-2:2021] is recommended. The paper also presents results and conclusions from an implementation exercise and sensitivity study carried out by participants of the IEA-PVPS Task 15 on BIPV. The cell coverage ratio in the PV laminate, the thermal resistance offered by the glazing configuration, the choice of boundary conditions and the effect of extracting electricity were all identified as parameters which significantly affect the SHGC value determined for a given type of BIPV glazing. A practicable approach to accommodate the great variety of dimensions typical for BIPV glazing is also proposed. These findings should pave the way for modifying the existing component-based standards for architectural glazing to take the specific features of BIPV glazing into account.

14 SOLAR ENERGY↗
DOE OSTI2016

Environmental variables associated with vacationers' sun protection at warm weather resorts in North America

Background: Vacationing at sunny, warm weather locations is a risk factor for excessive solar ultraviolet (UV) radiation exposure and skin cancer. Objectives: This study examined the association of environmental variables related to UV levels with vacationers' sun protection. Methods: Vacationers at 41 summer resorts in 17 states and 1 Canadian Province were interviewed (n=3531) and observed (N=4347) during 2012 and 2013. Clothing coverage, sunglasses, and shade use were observed. Use of sunscreen and sunburns were self-reported. Environmental information was recorded by research staff or acquired from ground stations and the weather service. Results: Temperature was positively associated with sun protection behaviors; however clothing coverage was negatively associated with temperature. Cloud cover was negatively associated with sun protection, with the exception of clothing coverage which was positively associated with it. Elevation showed a mixed pattern of associations with vacationer's sun protection. Latitude of a resort was negatively associated with most sun protection behaviors, such that sun protection increased at more southerly resorts. Similarly, the farther south a vacationer traveled to the resort, the less sun protection they employed. The UV index showed a weak, positive relationship with some sun protection behaviors even when controlling for temperature. Conclusions: Vacationers appeared aware that UV is higher at southern latitudes and may learn UV is intense when living in southern regions. However, many used temperature, an unreliable cue, to judge UV intensity and seemed to adjust clothing for warmth not UV protection. Efforts are needed to help individuals make more accurate sun safety decisions. - Highlights: • Vacationers poorly monitor and protect against environmental ultraviolet radiation (UVR). • On cloudy days vacationers fail to protect against UVR. • Temperature is erroneously used by vacationers as a marker for UVR. • Clothing is used primarily by vacationers for warmth, not UVR protection. • The farther south a vacationer travels, the more likely they are to sunburn.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2021

Initial plant community responses to hardwood control treatments in restoration of remnant longleaf pine (Pinus palustris) woodlands

Changes in land use over the past century have contributed to substantial losses of longleaf pine (Pinus palustris) woodlands in the southeastern USA and replacement with higher density, mixed pine and hardwood stands that suppress understory development and limit application of prescribed fire. To increase understanding of limiting factors and identify potential approaches for restoring longleaf pine woodlands, we studied in this work initial availability of light and soil water and 2-year (2018–2019) plant community responses after controlling overstory hardwoods in five remnant longleaf pine woodlands having no evidence of previous agriculture at the Savannah River Site near Aiken, SC, USA. Seven hardwood control treatments and a non-treated check were compared in a randomized compete block experiment: cutting, cutting + shredding of logging residues, stem injection with imazapyr herbicide, cutting + basal spray with imazapyr herbicide, cutting + basal spray with triclopyr herbicide, cutting + directed foliar spray with a mixture of glyphosate and imazapyr herbicides, and cutting + broadcast foliar spray with the same herbicide mixture. In the year prior to hardwood cutting (2016), understory light availability averaged 23% of full sun. Throughout the year of treatment installation (2017), average soil water content (SWC) was below permanent wilting point (5.5% SWC) where overstory hardwoods were retained; whereas, it was above wilting point (7.5%) where they had been cut. Thus, combined effects of shade and root competition from overstory hardwoods probably limited cover of herbaceous species in the non-treated check. In the 2 years following treatment, hardwood survival averaged > 99%, 62%, 42% and < 1% for the non-treated check, cutting, shredding, and herbicide treatments, respectively. Relative to the non-treated check, herbaceous species richness was increased by shredding, stem injection, basal spray, or directed foliar treatments; herbaceous cover was increased by basal spray or directed foliar treatments; and woody cover was decreased by directed or broadcast foliar treatments. The directed foliar spray was the most effective treatment for achieving many of the desired understory characteristics of a longleaf pine woodland, including a diverse understory dominated by herbaceous vegetation capable of supporting periodic prescribed fires. Although the imazapyr basal spray treatment increased cover of remnant woodland indicator species, none of the treatments increased richness of this species group, suggesting that restoration of native species composition will be expedited by enrichment seedings or plantings.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2023

Salinity exposure affects lower-canopy specific leaf area of upland trees in a coastal deciduous forest

Sea level rise and increasing storm surges are likely to affect the canopy physiology, ecology, and structure of coastal forests, even well in advance of tree mortality. Laboratory and greenhouse studies have documented that saltwater exposure can trigger changes in leaf-level physiology and morphology, but few in situ studies have examined how tree-specific leaf area (SLA), the ratio of leaf area to mass and a crucial trait and model parameter, is affected by saline soils. We conducted an observational study of SLA in a mid-Atlantic (USA) coastal deciduous forest, taking advantage of a natural gradient in salinity along a tidal creek. Measured SLA of the 239 trees and seven species sampled ranged from Carya glabra (N = 6 trees, mean SLA = 277.9±36.3cm 2 /g) to Fagus grandifolia (N=60, 321.9±62.9cm 2 g); as expected, trees species and canopy position (sun versus shade) significantly affected SLA. For trees (N=100) directly exposed to the tidal creek, salinity was highly significant after accounting for species (P<0.001), with trees in the lower reaches of the creek having lower SLA. Leaf area index (LAI), computed from SLA and litter traps, ranged from 4.8 to 15.8 and was inversely related to salinity exposure; the spatial variability in leaf litter production contributed much more to LAI uncertainty than did SLA variability. These in situ results are correlative but consistent with the hypothesis, based on previous greenhouse studies, that the stress of chronic salinity exposure changes species’ leaf morphology. Our findings are useful for understanding the growing effects of saltwater intrusion into upland forests, as well as parameterizing and testing ecosystem-scale models simulating forest stressors and disturbances at the terrestrial-aquatic interface.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

A performance comparison between GaInP-on-Si and GaAs-on-Si 3-terminal tandem solar cells

The pursuit of ever-higher solar cell efficiencies has focused heavily on multijunction technologies. In tandem cells, subcells are typically either contacted via two terminals (2T) or four terminals (4T). Simulations show that the less-common three-terminal (3T) design may be comparable to 4T tandem cells in its compatibility with a range of materials, operating conditions, and methods for subcell integration, yet the 3T design circumvents shading losses of the 4T intermediate conductive layers. This study analyzes the performance of two superstrate 3T III-V-on-Si (III-V//Si) tandem cells: One has slightly greater current contribution from the Si bottom cell (GaInP//Si) and the other has substantially greater current contribution from the GaAs top cell (GaAs//Si). Our results show that both tandem cells exhibit the same efficiency (21.3%), thereby demonstrating that the third terminal allows for flexibility in the selection of the top cell material, similar to the 4T design.

14 SOLAR ENERGY↗
DOE OSTI2017

Spectral analysis of amazon canopy phenology during the dry season using a tower hyperspectral camera and modis observations

The association between spectral reflectance and canopy processes remains challenging for quantifying large-scale canopy phenological cycles in tropical forests. In this paper, we used a tower-mounted hyperspectral camera in an eastern Amazon forest to assess how canopy spectral signals of three species are linked with phenological processes in the 2012 dry season. We explored different approaches to disentangle the spectral components of canopy phenology processes and analyze their variations over time using 17 images acquired by the camera. The methods included linear spectral mixture analysis (SMA); principal component analysis (PCA); continuum removal (CR); and first-order derivative analysis. In addition, three vegetation indices potentially sensitive to leaf flushing, leaf loss and leaf area index (LAI) were calculated: the Enhanced Vegetation Index (EVI), Normalized Difference Vegetation Index (NDVI) and the entitled Green-Red Normalized Difference (GRND) index. We inspected also the consistency of the camera observations using Moderate Resolution Imaging Spectroradiometer (MODIS) and available phenological data on new leaf production and LAI of young, mature and old leaves simulated by a leaf demography-ontogeny model. The results showed a diversity of phenological responses during the 2012 dry season with related changes in canopy structure and greenness values. Because of the differences in timing and intensity of leaf flushing and leaf shedding, Erisma uncinatum, Manilkara huberi and Chamaecrista xinguensis presented different green vegetation (GV) and non-photosynthetic vegetation (NPV) SMA fractions; distinct PCA scores; changes in depth, width and area of the 681-nm chlorophyll absorption band; and variations over time in the EVI, GRND and NDVI. At the end of dry season, GV increased for Erisma uncinatum, while NPV increased for Chamaecrista xinguensis. For Manilkara huberi, the NPV first increased in the beginning of August and then decreased toward September with new foliage. Variations in red-edge position were not statistically significant between the species and across dates at the 95% confidence level. The camera data were affected by view-illumination effects, which reduced the SMA shade fraction over time. When MODIS data were corrected for these effects using the Multi-Angle Implementation of Atmospheric Correction Algorithm (MAIAC), we observed an EVI increase toward September that closely tracked the modeled LAI of mature leaves (3–5 months). Compared to the EVI, the GRND was a better indicator of leaf flushing because the modeled production of new leaves peaked in August and then declined in September following the GRND closely. Finally, while the EVI was more related to changes in mature leaf area, the GRND was more associated with new leaf flushing.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2022

Structure of a dimeric photosystem II complex from a cyanobacterium acclimated to far-red light

Photosystem II (PSII) is the water-splitting enzyme central to oxygenic photosynthesis. To drive water oxidation, light is harvested by accessory pigments, mostly chlorophyll (Chl) a molecules, which absorb visible light (400–700 nm). Some cyanobacteria facultatively acclimate to shaded environments by altering their photosynthetic machinery to additionally absorb far-red light (FRL, 700–800 nm), a process termed far-red light photoacclimation or FaRLiP. During far-red light photoacclimation, FRL-PSII is assembled with FRL-specific isoforms of the subunits PsbA, PsbB, PsbC, PsbD, and PsbH, and some Chl-binding sites contain Chls d or f instead of the usual Chl a. The structure of an apo-FRL-PSII monomer lacking the FRL-specific PsbH subunit has previously been determined, but visualization of the dimeric complex has remained elusive. Here, we report the cryo-EM structure of a dimeric FRL–PSII complex. The site assignments for Chls d and f are consistent with those assigned in the previous apo-FRL-PSII monomeric structure. All sites that bind Chl d or Chl f at high occupancy exhibit a FRL-specific interaction of the formyl moiety of the Chl d or Chl f with the protein environment, which in some cases involves a phenylalanine sidechain. The structure retains the FRL-specific PsbH2 subunit, which appears to alter the energetic landscape of FRL-PSII, redirecting energy transfer from the phycobiliprotein complex to a Chl f molecule bound by PsbB2 that acts as a bridge for energy transfer to the electron transfer chain. Collectively, these observations extend our previous understanding of the structure-function relationship that allows PSII to function using lower energy FRL.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2020

Conceptual Design and Rationale for a New Agrivoltaics Concept: Pastured-Raised Rabbits and Solar Farming

Land-use conflicts created by the growth of solar photovoltaics (PV) can be mitigated by applying the concept of agrivoltaics, that is, the co-development of land for both PV and agricultural purposes, to commercial-scale solar installations. In this study, we present a conceptual design for a novel agrivoltaic system based on pasture-fed rabbit farming and provide the technical, environmental and economic analyses to demonstrate the viability of the concept. Included in our analysis are the economic advantages to the PV operator of grazing rabbits at a density sufficient to control vegetative growth, thus reducing the economic and environmental costs of mowing; the dual-revenue stream from the sale of both rabbits and electricity, contrasted with estimates of the capital-investment costs for rabbits co-located with, and also independent of, PV; and the economic value to the rabbit farmer of higher colony-growth rates (made possible by the shading and predator protection provided by the PV arrays and of reduced fencing costs, which are the largest capital cost, by being able to leverage the PV systems for rabbit fencing. We also provide an environmental analysis that suggests that rabbit-PV farming is a pathway to a measurable reduction in agriculturally-generated greenhouse-gas emissions. Here, our calculations indicate that the co-location of solar and rabbit farms is a viable form of agrivoltaics, increasing overall site revenue by 2.5%-24.0% above projected electricity revenue depending on location and rental/ownership of rabbits, while providing a high-value agricultural product that, on a per weight basis, has significantly less environmental impact than cattle.

14 SOLAR ENERGY↗
DOE OSTI2025

A product data network to enable faster, easier, and better planning of building envelopes

The building envelopes contributes significantly to the energy-efficiency of the building. Building performance simulation has made it possible to compare façade technologies regarding energy demand, daylighting, thermal and visual comfort in detail. Planners, such as architects and engineers, need experience to find product data with the right quality and level of detail, and to process the data to fit the calculation and the application. In the available time, planners can compare only a limited number of products, which means that better solutions could go unnoticed. This paper presents a new concept for making product data easily accessible for building façade planning. The concept consists of a network of databases for the efficient exchange and use of optical and calorimetric data of glazing units, shading devices, and combinations of both. The paper presents the research questions, an analysis of the current challenges, six design goals for the product data network and its implementation together with a discussion. Many product data sources can be connected to many planning software applications via the specified application programming interface. When planning software connects to the product data network, the planning of building envelopes can be much faster because planners do not need to spend so much time to search and process product data manually. The planning of building envelopes can also become much easier, especially for planners with limited experience. They do not need to understand all the details about which data fits which calculation if the software company implements this. The planning of building envelopes can become much more reliable when software companies validate their use of the product data network, because the current manual process is prone to errors. The planning of building envelopes can also improve because more products can be compared in the available time, allowing better solutions to be found.

Maurer, Christoph↗
DOE OSTI2020

Global Techno-Economic Performance of Bifacial and Tracking Photovoltaic Systems

Although most of the current photovoltaic (PV) system installations use monofacial modules with fixed-tilt mounting structures, bifacial modules, trackers, and the combination of them are also getting more attention as potential candidates to further reduce the PV levelized cost of electricity (LCOE). This work is then the first to present a worldwide analysis on the yield potential and cost-effectiveness of PV farms composed of monofacial fixed-tilt and single/dual (1T/2T) tracker installations, as well as their bifacial counterparts. Our approach starts by estimating the irradiance reaching the front and rear surface of the modules for the different system designs (validated based on data from real PV systems and results from the literature) to estimate their energy production (row-row shading is neglected). Subsequently, the overall system cost during their 25-year lifetime is factored in, and LCOE is obtained. The results reveal that bifacial-1T installations increase energy yield by 35% and reach the lowest LCOE for the majority of the world (93.1% of the land area). Although dual axis trackers achieve the highest energy generation — especially for bifacial modules — their cost is still too high, and are therefore not as cost-effective. Sensitivity analyses based on the Monte Carlo and region sensitivity approach are performed to analyze the impact of input assumptions on the calculated LCOE. These reveal that our conclusions are robust in general but exact configuration to choose depends on specific site conditions. This investigation is not only of interest to the scientific community, but also can be used as a guide for PV installation companies and investors to determine the most suitable technology for a particular location.

14 SOLAR ENERGY↗
DOE OSTI2025

How non-ohmic contact-layer diodes in perovskite pinholes affect abrupt low-voltage reverse-bias breakdown and destruction of solar cells

Perovskite solar cells (PSCs) rapidly degrade under reverse bias, a condition that may occur during partial shading. Here, in this study, we use electrical measurements, electron microscopy, and optical and thermal imaging to investigate abrupt breakdown and hotspotting under low reverse potentials (<|-2| V). We show that microscopic pinholes in the perovskite layer cause rapid, destructive breakdown under reverse bias despite minimally reducing power conversion efficiencies. Measurements on miniature (200-micrometer diameter) PSCs and perovskite-free transport-layer diodes indicate that abrupt, low-voltage breakdown occurs in nanoscale to micrometer-scale defects and that metal migration and filamentation are unlikely causes. Reverse-bias stability substantially improves when pinholes in the perovskite and transport layers are eliminated. Atomic layer deposition of tin oxide prevents abrupt breakdown by ensuring physical separation between electrodes-not by blocking metal ion migration. Perovskite researchers should adopt cleaner, more uniform deposition techniques to enable robust PSCs for further research and commercial applications.

14 SOLAR ENERGY↗
DOE OSTI2010

Crystal growth and properties of Ln{sub 2}Ag{sub 1-x}Ga{sub 10-y} (Ln=La, Ce), a disordered variant of the Ce{sub 2}NiGa{sub 10}-structure type

We report the flux growth and characterization of Ln{sub 2}Ag{sub 1-x}Ga{sub 10-y} (Ln=La, Ce), a disordered variant of the Ce{sub 2}NiGa{sub 10} structure type. Single crystals of La{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.6) and Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.9) were grown by the self-flux method and characterized using single-crystal X-ray diffraction. Transport measurements of Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.9) reveal metallic behavior with a transition at 3 K. Magnetic measurements indicate antiferromagnetic ordering at 3 K of localized Ce{sup 3+} moments for Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y}. Magnetoresistance is positive with a maximum value of 16% at 9 T. La{sub 2}Ag{sub 1-x}Ga{sub 10-y} exhibits metallic behavior with magnetic susceptibility showing temperature independent paramagnetism. We will compare Ce{sub 2}Ag{sub 1-x}Ga{sub 10-y} (x{approx}0.3; y{approx}0.9) to Ce{sub 2}NiGa{sub 10} to examine the effects of transition metal substitution and to the related Ce(Ag,Ga){sub 4} phase to examine the effects of crystal structure on the physical properties. - Graphical abstract: The figure illustrates the structure of Ce{sub 2}Ag{sub 0.7(1)}Ga{sub 9.1(1)}, which can be described as a distorted variant of the Ce{sub 2}NiGa{sub 10} structure. The distorted gallium segments are best described as variants of CeGa{sub 6} (PuGa{sub 6}-structure type), and the distorted Ce(Ag,Ga){sub 4}-type segments are built of layers of face-sharing tetragonal antiprisms. Here M=Ag+Ga and the shaded atoms are partially occupied.

36 MATERIALS SCIENCE↗
DOE OSTI2014

Photoluminescence and thermoluminescence properties of Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor

Energy level diagram of Tb{sup 3+} ion in the K{sub 3}Gd(PO{sub 4}){sub 2} host lattice. - Highlights: • First time, a detailed TL and PL study on undoped and Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor. • Combustion method was employed to synthesize the Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor. • Mechanism of excitation and emission in undoped and Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2} nanophosphor was given. - Abstract: Tb{sup 3+} doped nanoparticulate K{sub 3}Gd(PO{sub 4}){sub 2} phosphor was prepared by combustion method using urea as a fuel. The structure, optical and luminescent properties of the phosphor were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), diffuse reflectance spectroscopy (DRS), photoluminescence spectroscopy (PL), and thermoluminescence (TL) spectroscopy. In undoped K{sub 3}Gd(PO{sub 4}){sub 2}, the excitation and emission peaks at 273 nm and 323 nm belongs to the {sup 8}S{sub 7/2} → {sup 6}I{sub J(J=7/2)} and {sup 6}P{sub J(J=7/2)} → {sup 8} S{sub 7/2} transitions of Gd{sup 3+} while green emission was observed in the Tb{sup 3+} doped K{sub 3}Gd(PO{sub 4}){sub 2}. TL study was carried out after exposing the samples to γ-radiations (0.1–5 kGy) in the K{sub 3}Gd(PO{sub 4}){sub 2}:Tb{sup 3+} (1.5 mol%). The calculated kinetic parameters were compared with different methods. The band gap of the phosphor was estimated as 5.80 eV. The green shade of the Tb{sup 3+} ion with the CIE coordinates (x, y) as (0.29, 0.54) was in good agreement with the well known green phosphors.

36 MATERIALS SCIENCE↗
DOE OSTI2015

Effects of rare earth substitution on the optical properties of Bi{sub 2}MoO{sub 6} for coloring applications

Highlights: • New class of colored compounds BiREMoO{sub 6} (RE = Pr, Nd, Sm, Tb, Yb) was synthesized. • The substitution of RE gently red shifts the absorption edge to low energy side. • The differences in band gap depend on the position of the RE f bands. • The yellow colored compounds demonstrated good coloration to plastics. - Abstract: A new class of colored inorganic compounds, BiREMoO{sub 6} (RE = Pr, Nd, Sm, Tb and Yb) has been synthesized by a solid state route. The substitution of different rare earths for Bi{sup 3+} in Bi{sub 2}MoO{sub 6} produces visible light responsive compounds by gently red shifting the absorption edge to low energy side. The visible light absorption is based on the charge transfer transitions from O{sub 2p} valence band to conduction band made of primary Mo{sub 4d} and secondary Bi{sub 6p}. The substitution of RE{sup 3+} introduces partially occupied 4f electronic levels in between the band gap and the position of 4f level depend on the number of f electrons which allows tuning the band gap. Thus the rare earth substitution provides an opportunity to tailor the band gap of Bi{sub 2}MoO{sub 6} from 2.99 eV to 2.19 eV. The developed compounds exhibited different shades of yellow hue and demonstrated good coloration to plastics.

36 MATERIALS SCIENCE↗
DOE OSTI2022

Matlab implementation of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures

This paper presents the MatLab implementation details of a novel semi-structured kinetic model for methanotroph-photoautotroph cocultures. This includes the parameterization of the modeling equations, and the initialization of the simulation based on experimental conditions. More importantly, it provides details on how the differential equations governing mass balances in both gas and liquid phases are integrated together to simulate the system dynamics over time. The semi-structured kinetic model for methanotroph-photoautotroph coculture is validated using a wide range of experimental conditions. The model: Accurate predicts both the coculture growth in liquid phase and the gas composition changes in head space over time; Explicitly models the exchange of in situ produced O 2 and CO 2 within the coculture; Considers the self-shading effect on the growth of photoautotroph.

42 ENGINEERING↗