Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Resistance”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1982

Development of rapidly solidified oxidation resistant alloys

The development of iron-base alloys that contain low concentrations of expensive and/or strategic metals, but that are very resistant to oxidation at elevated tempratures was investigated. Rapid solidification processing was employed to make alloys that are uniform in composition, that comprise very fine grains 10 microns and that contain a uniform dispersion of very fine ( 0.5 microns) nonmetallic inclusions. Each of these factors contribute to the oxidation behavior of alloys. The compositional and processing variables that yield the optimum oxidation resistance are described.

Yurek, G. J.↗
NASA NTRS1981

Anomalous dc resistivity and double layers in the auroral ionosphere

There are at least four candidate instabilities which might account for anomalous dc resistivity in the auroral ionosphere. These are: the ion-acoustic instability, the Buneman instability, the ion-cyclotron instability and double layers. A description is given of the results of computer simulations of these four instabilities which suggest that double layers are most likely to be responsible for resistivity in the auroral zone.

Kindel, J. M.↗
NASA NTRS1983

Solvent-Resistant Polysulfones

Polysulfones terminated with trimethylsilylethynyl, ethynyl, and phenylethynyl groups increased solvent resistance. Upon application of heat, with or without catalyst, end groups react to provide cross linking and chain extension. Result: temperature of polymer increased, more importantly, solvent resistance greatly improved. Solutions used conveniently for preparation of films, coatings, membranes, prepreg, and adhesive tapes.

Hergenrother, P. M.↗
NASA NTRS1983

Reducing the Resistance of Conductive-Adhesive Bonds

Current pulses lower resistance of silver-filled epoxies. Capacitive discharge reduces interfacial resistance between aluminum surfaces joined with silver-filled epoxy. Technique offers noninvasive solution to problem of attaching grounding brackets to aluminum honeycomb structures.

Guertin, L. J.↗
NASA NTRS1982

Edge attachment study for fire-resistant canopies

Twenty-two resin systems were evaluated in laminate form for possible use as edge attachment material for fire-resistant canopies. The evaluation uncovered an unexpected development when the laminates were subjected to an intense flame: (1) the high-heat-resistant materials could withstand the flame test quite well, but experienced rapid heat transfer through the test specimen; (2) the laminates which exhibited a low rate of heat transfer were materials which lost strength rapidly in the presence of the flame by decomposition, delamination, and blistering.

Wintermute, G. E.↗
NASA NTRS1982

Radiation damage in front and back illuminated high resistivity silicon solar cells

Radiation induced degradation, in front and back illuminated 84 and 1250 ohm-cm n+pp+ silicon solar cells, was determined and cell performance interpreted using calculated optically injected charge distributions and cell voltage components. The 84 ohm-cm cell degraded less when illuminated from the front or n+ side compared to that when illuminated from the back or p+ side. On the other hand, the 1250 ohm-cm cell degraded less when back illuminated. It is concluded that, in addition to the usual mechanisms leading to decreased collection efficiencies, loss of conductivity modulation is a major cause of radiation damage in high resistivity silicon solar cells. These results suggest that radiation damage to high resistivity n+pp+ cells can be decreased by increasing cell collection efficiency and illuminating the cells from the p+ side.

Weinberg, I.↗
NASA NTRS1983

Development of aircraft lavatory compartments with improved fire resistance characteristics. Phase 4: Sandwich panel decorative ink development

Five chemically different resin systems with improved fire resistance properties were studied for a possible screenprinting ink application. Fire resistance is hereby defined as the cured ink possessing improvements in flammability, smoke emission, and thermal stability. The developed ink is for application to polyvinyl fluoride film. Only clear inks without pigments were considered. Five formulations were evaluated compared with KC4900 clear acrylic ink, which was used as a baseline. The tests used in the screening evaluation included viscosity, smoke and toxic gas emission, limiting oxygen index (LOI), and polyvinyl fluoride film (PVF) printability. A chlorofluorocarbon resin (FPC461) was selected for optimization studies. The parameters for optimization included screenprinting process performance, quality of coating, and flammability of screenprinted 0.051-mm (0.002-in.) white Tedlar. The quality of the screenprinted coating on Tedlar is dependent on viscosity, curing time, adhesion to polyvinyl fluoride film, drying time (both inscreen and as an applied film), and silk screen mesh material and porosity.

Jayarajan, A.↗
NASA NTRS1983

Wing modification for increased spin resistance

A simple wing leading-edge modification has been developed that delays outer wing panel stall, thus maintaining roll damping to higher angles of attack and delaying the onset of autorotation. The stall angle of attack of the outer wing panel has been shown to be a function of the spanwise length of the leading-edge modification. The margin of spin resistance provided by the modification is being explored through flight tests. Preliminary results have been used to evaluate spin resistance in terms of the difference in angle of attack between outer wing panel stall and the maximum attainable angle of attack.

Stough, H. P.↗
NASA NTRS1984

Development of an impact- and solvent-resistant thermoplastic composite matrix

Synthesis, moldability and chloroform, acetone and tricresyl phosphate resistance of 16 polymer compositions are described. These aliphatic heterocyclic polymers include polyimides, polybenzimidazoles, and N-arylenepolybenzimidazoles. A solution condensation (cresol) method to prepare imidized aliphaic polyimides is described. Two polyimides and one polybenzimidazole demonstrate no crazing or cracking during 500 hr exposure to the cited solvents under stress. Modification of one aliphatic polyimide with several aromatic amines suggests that m-phenylenediamine is singular in its behavior to improve the chloroform resistance of that class of polyimides.

Delano, C. B.↗
NASA NTRS1983

Impact damage resistance of flat glass/cellular glass solar mirror experimental panels

An attempt is made to characterize the hail-impact behavior of a solar concentrator structural material which consists of thin, second-surface silvered glass sheets bonded to structural support panels of cellular glass. The resulting glass/cellular glass panel can be described as a thin, brittle plate supported by an elastic foundation, with the adhesive bonding the two as a third component. The plate will bend during impact. Attention is experimentally given to how variations in the characteristics or geometry of the flat glass, adhesive and cellular glass affect hail-impact damage resistance. The critical energy needed to cause impact damage is calculated from the critical velocity of the iceball by means of the kinetic energy formula. The complexity of this structural system and the variability of the specimens render it impossible to completely develop an analytical treatment for the prediction of impact damage resistance.

Varner, J. R.↗
NASA NTRS1984

A temperature correlation for the radiation resistance of a thick-walled circular duct exhausting a hot gas

It is often useful to know the radiation impedance of an unflanged but thick-walled circular duct exhausting a hot gas into relatively cold surroundings. The reactive component is shown to be insensitive to temperature, but the resistive component is shown to be temperature dependent. A temperature correlation is developed permitting prediction of the radiation resistance from a knowledge of the temperature difference between the ambient air and the gas flowing from the duct, and a physical basis for this correlation is presented.

Mahan, J. R.↗
NASA NTRS1984

Selection of burn-resistant materials for oxygen-driven turbopumps

NASA goals for reusable space-based, high-performance orbit transfer vehicle propulsion systems have resulted in a need for oxygen/hydrogen engines which include lightweight, highly reliable, liquid oxygen pumps. The selection of ignition- and burn-resistant materials is a major factor in the design of a compact 75,000-rpm turbopump which can deliver 6 lbM/sec of liquid oxygen at 5,000 psia. The potential operational hazards of rubbing friction and impact of foreign particles at high velocity were investigated experimentally for a wide range of candidate materials, i.e., nickel, copper, monel, 316 Stainless Steel, Hastelloy-X, Invar-36, and silicon carbide. Test parameters included oxygen pressure and temperature up to 5,000 psia and 800 F, respectively. The effect of increasing the O2 pressure from 1000 to 5000 psi is discussed. The applicability of the candidate materials to oxygen pump design was ranked by comparing the experimental results among themselves and with an analytically determined parameter, i.e., the burn factor. Nickel and copper demonstrated superior resistance to ignition and burn in the friction rubbing and particle impact tests relative to monel, stainless steel, and nickel-iron base superalloys.

Schoenman, L.↗
NASA NTRS1984

Wing design for spin resistance

Use of a discontinuous outboard wing leading edge to improve stall/spin characteristics has been evaluated through wind-tunnel and flight tests. Addition of such a discontinuous outboard wing leading-edge droop design to three light airplanes having NACA 6-series airfoil sections produced significant improvements in stall characteristics and spin resistance. The increased spin resistance of the modified airplanes has been related to the difference in angle of attack between the outer wing panel stall and the maximum attainable angle of attack.

Stough, H. P., III↗
NASA NTRS1984

Thermal ripples in a resistive and radiative instability

The development of the resistive tearing instability in the case of sheared magnetic fields is considered, taking into account also the occurrence of a radiatively driven thermal instability. It is pointed out that thermal conduction has generally been neglected in theories similar to those discussed. The present investigation is concerned with a consideration of both parallel and perpendicular thermal conduction, in addition to finite resistivity and radiative loss. Attention is given to the equations and the model, the spatial singularity which arises with consideration of only the parallel heat conduction, the removal of this singularity and the formation of temperature oscillations (thermal ripples) by inclusion of the perpendicular heat-flux component, and details regarding the numerical procedure. A brief explanation is provided of the conditions required for the oscillations, and potential implications of the results with respect to the solar flare are discussed.

Steinolfson, R. S.↗
NASA NTRS1986

Magnetron Sputtering Deposits Corrosion-Resistant Alloy

Dense, amorphous, metallic film resists corrosion attack by acid. Coatings thermally stable up to 800 degrees C and made corrosion resistant by proper choice of sputtering deposition conditions. Protective, corrosionresistant coatings applied to process equipment that comes in contact with aqueous, neutral, or acidic solutions in chemical, petroleum, and paper industries, in wastewater treatment, and in heat exchangers.

Khanna, S. K.↗
NASA NTRS1984

Dynamics of graphite fiber intercalation: In situ resistivity measurements with a four point probe

The dynamics of ferric chloride intercalation of single graphite fibers were studied, in situ, using a four point dc bridge. Measurements before, during and after the intercalation showed that the intercalation occurred within minutes at 200 C. Changes in fiber resistivity after exposure to air suggested hydration of the graphite intercalation compound. Deintercalation of the ferric chloride was initiated at temperatures in excess of 400 C. cycling the intercalant into and out of the graphite fiber gave no improvements in fiber resistivity. The activation energy of the ferric chloride intercalation reaction was found to be 17 + or - 4 kcal/mol 1 consistent with the concept of a preliminary nucleation step in the intercalation reaction.

Jaworske, D. A.↗
NASA NTRS1984

Characterizing Delamination Resistance of Toughened Resin Composites

The delamination resistance of toughened resin composites was studied. Both the edge delamination test (EDT) and the double-cantilever-beam (DCB) test provided a useful ranking of improvements in delamination resistance between brittle and tough resin composites. Several layups were designed for the edge delamination test to cover a wide range of mixed-mode conditions. The DCB and the various layups of the EDT were then used to characterize the interlaminar fracture behavior of brittle and toughened resin composites subjected to both static and cyclic loading.

Obrien, T. K.↗