Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Ratio”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1976

Performance of a 1.57 pressure-ratio transonic fan stage with a screen-induced 90 deg circumferential inlet flow distortion

A transonic fan stage having a design pressure ratio of 1.57 was tested with a 90 degree circumferential distortion imposed on the inlet flow. The rotor diameter was approximately 50.8 cm, and the design pressure ratio was 1.60 at a tip speed of 425 m/sec. Overall performance at 70 and 100 percent of design speed showed a loss of stall pressure ratio and flow range at design speed and no significant loss in stall pressure ratio at 70 percent of design speed. Detailed flow measurements are presented to show the rotor-upstream flow interactions and the attenuation and amplification properties through the stage.

Sanger, N. L.↗
NASA NTRS1976

Effect of coolant flow ejection on aerodynamic performance of low-aspect-ratio vanes. 1: Performance with coolant ejection holes plugged

The aerodynamic performance of a low aspect ratio turbine vane designed with coolant flow ejection holes on the vane surfaces was experimentally determined in a full-annular cascade with the coolant ejection holes plugged. The purpose was to establish a baseline for comparison with tests where flow is ejected from the vane surfaces. The vanes were tested over a mean-section ideal critical velocity ratio range of 0.64 to 0.98. This ideal critical velocity ratio corresponds to the vane inlet total to vane aftermixed static pressure ratio at the mean section. The variations in vane efficiency and aftermixed flow conditions with circumferential and radial position were obtained.

Haas, J. E.↗
NASA NTRS1976

Single-stage experimental evaluation of low aspect ratio, highly loaded blading for compressors. Part 9: Stage F and stage G, volume 1

Two single-stage, 0.77 hub/tip ratio axial-flow compressors were tested to evaluate the effectiveness of low aspect ratio blading as a means of obtaining higher stage loadings. One compressor, designated Stage F, was comprised of circular arc blading with an aspect ratio of 0.9 for both the rotor and stator. This compressor was tested with uniform inlet flow, hub radial, tip radial, and 180 deg arc circumferential inlet distortion. The second compressor, designated Stage G, was comprised of multiple circular arc blading with an aspect ratio of 1.0 for both the rotor and stator. This compressor was tested with uniform inlet flow only. Design rotor tip speeds for Rotor F and Rotor G were 285 m/sec (934 ft/sec) and 327 m/sec (1,074 ft/sec) respectively. Both stages operated at high loading levels with adequate efficiency and operating range. The peak efficiencies and corresponding average stage diffusion factors for Stages F and G at design rotor speed were 86.4% and 84.1% and 0.59 and 0.55 respectively. The surge margin at peak efficiency for Stage F was 12.6% and the corresponding value for Stage G was 16.5%. Both stages experienced a loss in efficiency with increasing rotor speed; however, the multiple circular arc rotor delayed the characteristic loss in efficiency within increasing Mach number to higher Mach number.

Cheatham, J. G.↗
NASA NTRS1977

Preliminary studies of autoignition and flashback in a premixing-prevaporizing flame tube using Jet-A fuel at lean equivalence ratios

Lean equivalence ratios from 0.3 to 0.7 were observed. Combustor inlet air pressures were varied from 0.54 to 2.5 MPa, combustor inlet air temperatures from 550 to 700 K, and reference velocities from 8 to 35 meters per second. Autoignition delay times ranged from 15 to 100 milliseconds and varied inversely with pressure. The Arrhenius activation energy was 41,840 joules per mole. Temperature rise data were obtained in a long premixing-prevaporizing tube at a pressure of 0.56 MPa. Preflame temperature rise data were a function of equivalence ratio, inlet air temperature, and tube residence time. Significant temperature rise occurred above temperatures of 760 K, with autoignition occurring at 775 K for equivalence ratios greater than 0.47. The reactions were similar to cool-flame phenomena. Flashback velocities were measured at temperatures of 610 and 700 K, pressure of 0.56 MPa, and equivalence ratios from 0.6 to 1. Flashback velocities varied from 30 to 65 meters per second.

Marek, C. J.↗
NASA NTRS1976

The C-12/C-13 ratio in stellar atmospheres. VI - Five luminous cool stars

A simple curve-of-growth technique is described for extracting the C-12/C-13 ratio for M stars from high-resolution spectra of CO infrared vibration-rotation lines. The technique is applied to the CO lines at 1.6 and 2.3 microns in spectra of two M supergiants (Alpha Ori and Alpha Sco), two M giants (Alpha Her and Beta Peg), and a Mira-type variable (Chi Cyg). As a check on the CO analysis, the C-12/C-13 ratio is derived from the red CN system at 8000 A for Alpha Sco, Alpha Ori, and Beta Peg. The CO analysis is also applied to the K giant Alpha Boo as a check. The CN and CO results are found to be in general agreement, and the C-12/C-13 ratio in all the examined stars is shown to be considerably lower than the solar-system value. It is suggested that these stars were formed from clouds with a C-12/C-13 ratio of 40 to 89 and that their atmospheres now exhibit an enhancement of C-13 abundance due to internal production and mixing to the surface.

Hinkle, K. H.↗
NASA NTRS1977

Evaluation of a low aspect ratio small axial compressor stage, volume 1

A program was conducted to evaluate the effects of scaling, tip clearance, and IGV reset on the performance of a low aspect ratio compressor stage. Stage design was obtained by scaling an existing single stage compressor by a linear factor of 0.304. The design objective was to maintain the meanline velocity field of the base machine in the smaller size. Adjustments were made to account for predicted blockage differences and to chord lengths and airfoil edge radii to obtain reasonable blade geometries. Meanline velocity diagrams of the base stage were not maintained at the scaled size. At design speed and flowrate the scaled stage achieved a pressure ratio of 1.423, adiabatic efficiency of 0.822, and surge margin of 18.5%. The corresponding performance parameters for the base stage were 1.480, 0.872, and 25.2%, respectively. The base stage demonstrated a peak efficiency at design speed of 0.872; the scaled stage achieved a level of 0.838. When the scaled stage rotor and stator tip clearances were doubled, the stage achieved a pressure ratio of 1.413, efficiency of 0.799, and surge margin of 16.0% at the design flowrate. The peak stage efficiency at design speed was 0.825 with the increased clearance. Increased prewhirl lowered the stage pressure ratio as expected. Stage efficiency was maintained with ten degrees of increased prewhirl and then decreased substantially with ten additional degrees of reset.

Sawyer, C. W., III↗
NASA NTRS1979

Some implications of revised OI /7990 A/ and OI /11287 A/ branching ratios

Recent laboratory, geophysical, and theoretical determinations of the O I (7990 A) and O I (11,287 A) branching ratios indicate that the generally used values based on the NBS transition parameters need revision. The O I (7990 A) branching ratio is about 300 times smaller than the NBS value, and the O I (11,287 A) is about one-quarter as large. The transitions are important in the generation of permitted atomic oxygen spectra in several types of astronomical source, including the Orion Nebula (M42), the Seyfert galaxy NGC 4151, Arcturus, and comets. The absence of the O I (7990 A) emission in M42 and NGC 4151 is consistent with its very small branching ratio, and previous conclusions based on its absence, such as the rejection of starlight excitation in the Seyfert galaxy, require reinvestigation. The reduction of the O I (11,287 A) branching ratio is pertinent to hydrogen L-beta fluorescence excitation of O I (1304 A) and O I (8446 A) emission and requires an upward revision of oxygen production rates in comets.

Christensen, A. B.↗
NASA NTRS1979

The ratio of deuterium to hydrogen in interstellar space. IV - The lines of sight to Delta, Epsilon, and Iota Orionis

Deuterium absorption features in spectra of Delta, Epsilon, and Iota Ori obtained with Copernicus are analyzed. The Iota Ori line-of-sight analysis, which is quite detailed because of the high-velocity H I components superposed on the deuterium features, gives a D/H ratio (which is uncertain because of a complex profile) of 0.000014. A D/H ratio of the order of 7 millionths is determined for Delta and Epsilon Ori. For the complex line profiles involved, one may regard this as a formal lower limit. Several attempts were made to increase the ratio N(D I)/N(H I) in the context of reasonable models for the line of sight, but with no success; the derived values are therefore regarded as actual values, not lower limits. Since the derived value is an average on the line of sight, the possibility cannot be ruled out that the true ratios N(D I)/N(H I) in individual nearby components differ from the mean values. The mean value for these two directions is lower by a factor of 4 than the best value for the Zeta Pup line of sight (the highest yet derived for path lengths greater than 50 pc).

Laurent, C.↗
NASA NTRS1979

Reversal of the /O III/lambda 4363/H sub gamma lambda 4340 ratio in the planetary nebula IC 4997

Five image-tube spectrograms of the planetary nebula IC 4997 obtained during August 1977 show that the intensity forbidden ratio O III 4363 A/H-gamma 4340 A was equal to unity, but a sixth one obtained in April 1978 showed the ratio to be 0.91. These results represent a significant increase in the intensity ratio, which had been declining from 1895 to 1962 (when it was considerably less than unity), and is interpreted as resulting from a gradual increase in temperature of the nebula's central star accompanied by a transient event which led to a temporarily high value for the ratio in mid-1977.

Feibelman, W. A.↗
NASA NTRS1980

Tables of stark level transition probabilities and branching ratios in hydrogen-like atoms

The transition probabilities which are given in terms of n prime k prime and n k are tabulated. No additional summing or averaging is necessary. The electric quantum number k plays the role of the angular momentum quantum number l in the presence of an electric field. The branching ratios between stark levels are also tabulated. Necessary formulas for the transition probabilities and branching ratios are given. Symmetries are discussed and selection rules are given. Some disagreements for some branching ratios are found between the present calculation and the measurement of Mark and Wierl. The transition probability multiplied by the statistical weight of the initial state is called the static intensity J sub S, while the branching ratios are called the dynamic intensity J sub D.

Omidvar, K.↗
NASA NTRS1981

A study of high-altitude manned research aircraft employing strut-braced wings of high-aspect-ratio

The effect of increased wing aspect ratio of subsonic aircraft on configurations with and without strut bracing. Results indicate that an optimum cantilever configuration, with a wing aspect ratio of approximately 26, has a 19% improvement in cruise range when compared to a baseline concept with a wing aspect ratio of approximately 10. An optimum strut braced configuration, with a wing aspect ratio of approximately 28, has a 31% improvment in cruise range when compared to the same baseline concept. This improvement is mainly due to the estimated reduction in wing weight resulting from use of lifting struts. All configurations assume the same mission payload and fuel. The drag characteristics of the wings are enhanced with the use of laminar flow airfoils. A method for determining the extent of attainable natural laminar flow, and methods for preliminary structural design and for aerodynamic analysis of wings lifting struts are presented.

Smith, P. M.↗
NASA NTRS1981

Measured branching ratios for O II2D and 2P transitions in the wavelength range 530 to 800 A

Branching ratios for four sets of extreme ultraviolet transitions terminating on the 2D0 and 2P0 metastable levels of ionized oxygen have been measured. The emissions were excited in both an open window hollow cathode and a capillary discharge lamp, and the branching ratios were derived from the observed intensity ratios of the multiplet pairs. The results are in good agreement with theoretical values and compare favorably, within experimental uncertainties, with line ratios obtained by EUV spectroscopy of the airglow.

Morrison, D.↗
NASA NTRS1982

High-Ratio Gear Train

Proposed arrangement of two connected planetary differentials results in gear ratio many times that obtainable in conventional series gear assembly of comparable size. Ratios of several thousand would present no special problems. Selection of many different ratios is available with substantially similar gear diameters. Very high gear ratios would be obtained from small mechanism.

Lefever, A. E.↗
NASA NTRS1982

The significance of Cl/P2O5 ratios from lunar samples

The Cl(r)/P2O5 ratios of lunar samples are reported to occur in three groups (Jovanovic and Reed, 1975; etc.). These data have been modeled as representative of three discrete volumes of differentiating magma and correlated with large convection cells and moon-wide heterogeneities. The assumptions inherent to their model are not valid. That the Cl(r)/P2O5 ratio of apatite or a rock is indicative of a magma system is unrealistic. A range of ratios can be generated during the fractionation of a magma. Apatite is not the major Cl- and P-bearing phase in most of the samples analyzed; rust, FeO(OH, Cl) and schreibersite, (FeNi)3P, occur in over 2/3 rds of the Apollo 16 rocks where they constitute 0.1-0.6 modal %, enough to account for most of the Cl(r) and P2O5 analyzed. Due to the complexities and presence of these minerals in soils and breccias, Cl(r)/P2O5 ratios have no real significance in non-igneous samples. However, basaltic rocks alone do not define any statistically significant Cl(r)P2O5 groupings.

Taylor, L. A.↗
NASA NTRS1981

Free-jet acoustic investigation of high-radius-ratio coannular plug nozzles. Comprehensive data report, volume 1

Six coannular plug nozzle configurations having inverted velocity and temperature profiles, and a baseline convergent conical nozzle were tested for simulated flight acoustic evaluation in General Electric's Anechoic Free-Jet Acoustic Facility. The nozzles were tested over a range of test conditions that are typical of a Variable Cycle Engine for application to advanced high speed aircraft. The outer stream radius ratio for most of the configurations was 0.853, and the inner-stream-outer-stream area ratio was tested in the range of 0.54. Other variables investigated were the influence of bypass struts, a simple noncontoured convergent-divergent outer stream nozzle for forward quadrant shock noise control, and the effects of varying outer stream radius and inner-stream-to-outer-stream velocity ratios on the flight noise signatures of the nozzles. It was found that in simulated flight, the high-radius-ratio coannular plug nozzles maintain their jet noise and shock noise reduction features previously observed in static testing. The presence of nozzle bypass structs will not significantly effect the acoustic noise reduction features of a General Electric-type nozzle design. A unique coannular plug nozzle flight acoustic spectral prediction method was identified and found to predict the measured results quite well. Special laser velocimeter and acoustic measurements were performed which have given new insight into the jet and shock noise reduction mechanisms of coannular plug nozzles with regard to identifying further beneficial research efforts.

Knott, P. R.↗
NASA NTRS1983

Dynamic tooth loads and stressing for high contact ratio spur gears

An analysis and computer program were developed for calculating the dynamic gear tooth loading and root stressing for high contact ratio gearing (HCRG) as well as LCRG. The analysis includes the effects of the variable tooth stiffness during the mesh, tooth profile modification, and gear errors. The calculation of the tooth root stressing caused by the dynamic gear tooth loads is based on a modified Heywood gear tooth stress analysis, which appears more universally applicable to both LCRG and HCRG. The computer program is presently being expanded to calculate the tooth contact stressing and PV values. Sample application of the gear program to equivalent LCRG (1.566 contact ratio) and HCRG (2.40 contact ratio) revealed the following: (1) the operating conditions and dynamic characteristics of the gear system an affect the gear tooth loading and root stressing, and therefore, life significantly; (2) the length of the profile modification affect the tooth loading and root stressing significantly, the amount depending on the applied load, speed, and contact ratio; and (3) the effect of variable tooth stiffness is small, shifting and increasing the response peaks slightly from those for constant tooth stiffness.

Cornell, R. W.↗
NASA NTRS1983

EUV branching ratios for ionized nitrogen and oxygen emissions

Branching ratios of single ionized atomic nitrogen and oxygen EUV emissions that terminate on the metastable states of the respective ions are presented. The four NII ratios and the 482/515 A ratio in OII reported represent the first measured values. Details of the wavelength calibration procedures adopted and a brief discussion of two modeling implications of the measured ratios are included.

Morrison, M. D.↗
NASA NTRS1983

The C-12/C-13 ratio in Jupiter from the Voyager infrared investigation

An analysis of the v(4) band of CH4 in the spectra recorded by the Voyager 1 IRIS experiment has yielded a C-12/C-13 ratio in Jupiter that is 160 plus 40 or minus 55, or 1.8 plus 0.4 or minus 0.6 times the terrestrial value. It is noted that while no plausible theory predicts such a difference between the C-12/C-13 ratio values of Jupiter and the inner solar system, values of this ratio in the solar neighborhood 4.5 million years ago, inferred from recent interstellar medium measurements, are compatible with the present determination in Jupiter. The Jovian, rather than the terrestrial value, would then be representative of the carbon isotope ratio in the primitive solar nebula.

Courtin, R.↗