SEARCH · Engineering Papers
Results for “Random phase approximation”
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
Scaling Theory of Neutral Sequence-Specific Polyampholytes
The primary sequence of charged monomers in a polyampholyte has a profound effect on its conformational properties. In this work, theory and simulations are used to predict how the sequence influences the single-chain behavior of globally neutral polyampholytes (PAs) under salt-free conditions. We consider PAs with Markov statistics of charges, where charge “blockiness” is defined by the correlation λ along the chain. These PAs cover a wide spectrum of primary sequences ranging from alternating (λ = –1) to ideally random (λ = 0) to diblock (λ → 1). In a theta solvent, sufficiently long PAs of any primary sequence form globules, but their internal structure, as well as the position and sharpness of the coil–globule transition, crucially depends on λ. Further, using scaling arguments, we demonstrate that the excess charge of the globule correlation volume (blob) increases with increasing λ, thereby inducing stronger Coulomb attractions between neighboring blobs of opposite charge and leading to higher density PA globules. Scaling predictions are supported by the results of the random phase approximation (RPA) and coarse-grained molecular dynamics simulations. A generalization to good and poor solvents is presented that enables the construction of the resulting scaling diagram of PA conformations in terms of solvent quality and charge blockiness, thereby providing a comprehensive molecular understanding of the role of the PA primary sequence in the chain structure.
Electrostatic Interactions Control the Nanostructure of Conjugated Polyelectrolyte–Polymeric Ionic Liquid Blends
Polyelectrolyte complexation offers unique opportunities to compatibilize polymers with very different backbone chemistries and to control the morphology of the resulting blend via electrostatic manipulation. In this study, we demonstrate the ability to formulate homogeneous complexes of a conjugated polyelectrolyte with a polymeric ionic liquid, utilizing the electrostatic attraction among their oppositely charged side chains. Variation of electrostatic parameters, such as counterion concentration or polymer charge fraction, tunes the morphology of these polymer complexes from homogeneously disordered blend to weakly structured microemulsion where the local ordering arises from backbone-immiscibility-induced microphase segregation. Our experimental observations are in qualitative agreement with both field-theoretic simulation and random-phase approximation calculations. Simulated morphology snapshots suggest and experimental evidence also indicates that the microphase-segregated complex likely takes on a cocontinuous microemulsion structure. Our findings show that ionic interactions are an effective pathway to compatibilize polymers at macroscopic length scales while achieving controlled nanostructures in these ionic blends. Such systems have great potential for engineering the nanostructure of polymers to tailor applications such as nanofiltration, catalysis, and energy storage, where local ordering can enhance the physical properties of an otherwise macroscopically homogeneous structure.
The Influence of Charge Correlation and Ion Solvation on the Phase Behavior of Single-Ion Conducting Polymer Blend Electrolytes Using SAXS/SANS
Single-ion conducting polymer blends (SICPBs) have demonstrated exceptional electrochemical performance as solid-state battery electrolytes; however, their nanoscale morphology and thermodynamic behavior remain unexplored. In this work, we investigate blends composed of deuterated poly(ethylene oxide) and poly[lithium sulfonyl(trifluoromethane sulfonyl)imide methacrylate], dPEO/P(LiMTFSI), and report the first experimental study of the nanostructures of charge-neutral polymer blends using small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS). Despite the macroscopic miscibility indicated by a single glass-transition temperature, SANS and SAXS results reveal disordered, charge-correlated nanostructures that are strongly influenced by blend composition and temperature. At low concentrations of charge polymer, the scattering is dominated by concentration fluctuations, and the random phase approximation is applied to extract values of the Flory–Huggins interaction parameter, χ SC . At higher charged polymer content, concentration fluctuations are suppressed, and a correlation model is used to characterize the nanostructures of the charge correlations. We find that the structures of the charge correlations are highly dependent on blend composition─consistent with predictions from Sing’s self-consistent field theory-liquid state models. Understanding these features is essential for uncovering the ion transport mechanism that leads to improved electrochemical performance previously reported in SICPB systems.
Data-Efficient Methods for Determining Flory–Huggins χ Parameters in Multicomponent Polymer Formulations
Polymer formulations are essential in diverse applications including personal care products, coatings, paints, adhesives, and plastic materials. Designing these formulations requires navigating large, complex design spaces, where phase and self-assembly behavior critically impact performance. The Flory–Huggins χ parameter, which quantifies segmental miscibility, is widely used to parametrize the excess free energy of mixing in formulation models. In this work, we introduce two data-efficient, top-down methods for estimating χ parameters using the Random Phase Approximation (RPA): (i) Boundary Nonlinear Regression (Boundary-NLR), which fits theoretical spinodal boundaries to experimental phase boundaries, and (ii) Surrogate Model Inverse Parameter Estimation (SMIPE), which uses a Gaussian Process Classifier to fit sparse phase maps via a surrogate model. Both methods allow rapid parametrization of polymer field-theoretic models without the need for additional experiments. We evaluate these approaches on data sets involving polymer–solvent–nonsolvent ternary mixtures and block copolymer–solvent systems, demonstrating their robustness to experimental noise and their relevance for real-world formulation design.
Mechanisms of Metal Additive-Induced Ordering During SNIPS Membrane Formation
Isoporous membranes can be fabricated by combining self-assembly with nonsolvent induced phase separation (SNIPS) using an amphiphilic block copolymer like polystyrene-b-poly(4-vinylpyridine) (SV). Poly(4-vinylpyridine) (V) is known to complex with metal salts, which are hypothesized to stabilize solution ordering and preserve structure during casting. We explored how the molar ratio of metal additive to the poly(4-vinylpyridine) block affected the final membrane morphology via scanning electron microscopy (SEM). Dynamic light scattering (DLS), small-angle X-ray scattering (SAXS), and in situ grazing-incidence SAXS were used to track changes in solution ordering and chain conformation as a function of the molar ratio of the additive to the V block. Additives induced aggregation, promoted the formation of more compact conformations in solution, and facilitated micelle ordering onto lattices at optimal ratios. Furthermore, these experimental results were supported by random phase approximation calculations, which helped explain how the thermodynamic order–disorder transition shifts with additive binding strength. Stronger additive–polymer interactions reduced the block copolymer volume fraction required for ordering in solution, allowing ordered domains to form at lower polymer concentrations.
Structure and Thermodynamics of Hybrid Organic–Inorganic Diblock Copolymers with Salt
© 2019 American Chemical Society. We examine the phase behavior of a hybrid organic-inorganic diblock copolymer/salt mixtures. The experimental system comprises poly(ethylene oxide)-block-polyhedral oligomeric silsesquioxane (PEO-POSS) mixed with a lithium bis(trifluoromethane sulfonyl) imide (LiTFSI) salt. Although the diblock copolymers without salt exhibit a classical order-to-disorder transition behavior with increasing temperature, the PEO-POSS/salt mixtures exhibit disorder-to-order transitions with increasing temperature. The analysis of a small-angle X-ray scattering data from the disordered state using Leibler's random phase approximation enables the determination of an effective Flory-Huggins interaction parameter, χ eff , for the electrolytes. Unlike conventional systems, χ eff increases with increasing temperature. A simple expression is proposed to describe the dependence of χ eff on temperature and salt concentration. This enables the calculation of the segregation strength, χ eff N, for both ordered and disordered electrolytes. The composition of the electrolytes is quantified by f EO/LiTFSI , the volume fraction of the salt-containing poly(ethylene oxide)-rich phase. The morphology of electrolytes is presented on a χ eff N versus f EO/LiTFSI phase diagram. Finally, over the values of f EO/LiTFSI studied (0.61-0.91), only two ordered phases were found: lamellae and co-existing lamellae/hexagonally packed cylinders.
Composition Dependence of the Flory–Huggins Interaction Parameters of Block Copolymer Electrolytes and the Isotaksis Point
The thermodynamics of block copolymer/salt mixtures were quantified through the application of Leibler’s random phase approximation to disordered small-angle X-ray scattering profiles. The experimental system is comprised of polystyrene-block-poly(ethylene oxide) (SEO) mixed with lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI), SEO/LiTFSI. The Flory–Huggins interaction parameter determined from scattering experiments, χ SC , was found to be a function of block copolymer composition, chain length, and temperature for both salt-free and salty systems. In the absence of salt, χ 0,SC is a linear function of (N$f_{EO}$) -1 ; in the presence of salt, a linear approximation is used to describe the effect of salt on χ eff,SC for a given copolymer composition and chain length. The theory of Sanchez was used to determine χ eff from χ eff,SC to predict the boundary between order and disorder as a function of chain length, block copolymer composition, salt concentration, and temperature. At fixed temperature (100 °C), N crit , the chain length of SEO at the order–disorder transition in SEO/LiTFSI mixtures, was predicted as a function of the volume fraction of the salt-containing poly(ethylene oxide)-rich microphase, $f_{EO,salt,}$ and salt concentration. At $f_{EO,salt,}$ > 0.27, the addition of salt stabilizes the ordered phase; at $f_{EO,salt,}$ < 0.27, the addition of salt stabilizes the disordered phase. We propose a simple theoretical model to predict the block copolymer composition at which phase behavior is independent of salt concentration ($f_{EO,salt,}$ = 0.27). Here, we refer to this composition as the “isotaksis point”.
Investigating the Effect of Added Salt on the Chain Dimensions of Poly(ethylene oxide) through Small-Angle Neutron Scattering
We have measured the effect of added salt on the chain dimensions of mixtures of poly(ethylene oxide) (PEO) and lithium bis(trifluoromethanesulfonyl)imide salt (LiTFSI) in the melt state through small-angle neutron scattering (SANS) experiments. Scattering profiles from blends of hydrogenated and deuterated PEO mixed with LiTFSI were measured as a function of salt concentration. Scattering profiles from pure deuterated PEO/LiTFSI mixtures were used for background-subtraction purposes. The densities of PEO/LiTFSI mixtures of varying salt concentrations were measured to calculate partial molar monomer volumes of PEO and LiTFSI to account for nonideal mixing. Kratky plots of the scattering profiles were used to calculate the salt concentration dependence of statistical segment length. At low salt concentrations, segment length decreases with increasing salt concentration, before increasing with increasing salt concentration in the high salt concentration regime. The random phase approximation was used to predict theoretical scattering profiles from the calculated segment lengths and partial molar volumes; there is excellent agreement between the theoretical and measured scattering profiles at all salt concentrations. There appears to be a correlation between chain dimensions and coordination between lithium ions and EO monomers. Finally, the scattering profiles of the pure deuterated PEO/LiTFSI mixtures suggested the presence of ion clusters of characteristic size of 0.6 nm at high salt concentrations.
Direct Structural Evidence for Interfacial Gradients in Asymmetric Polymer Nanocomposite Blends
Understanding the complex structure of polymer blends filled with nanoparticles (NPs) is key to design their macroscopic properties. In this work, the spatial distribution of hydrogenated (H) and deuterated (D) polymer chains asymmetric in mass is studied by small-angle neutron scattering. Depending on the chain mass, a qualitatively new large-scale organization of poly(vinyl acetate) chains beyond the random-phase approximation is evidenced in nanocomposites with attractive polymer–silica interactions. The silica is found to systematically induce bulk segregation. Only with long H-chains, a strong scattering signature is observed in the q range of the NP size: it is the sign of interfacial isotopic enrichment, that is, of contrasted polymer shells close to the NP surface. A quantitative model describing both the bulk segregation and the interfacial gradient (over ca. 10–20 nm depending on the NP size) is developed, showing that both are of comparable strength. In all cases, NP surfaces trap the polymer blend in a non-equilibrium state, with preferential adsorption around NPs only if the chain length and isotopic preference toward the surface combine their entropic and enthalpic driving forces. This structural evidence for interfacial polymer gradients will open the road for quantitative understanding of the dynamics of many-chain nanocomposite systems.
Theoretical Study of the Structure and Assembly of Janus Rods
Microscopic integral equation theory is applied to investigate the real and Fourier space structure and phase behavior of compositionally symmetric AB Janus rods that interact via hard core excluded volume interactions and competing repulsive and attractive tail potentials. If the spatial range of the latter are short and equal, chemical asymmetry results in attraction-driven assembly into a cylindrical micellar structure of spatial periodicity between one and two rods lengths. The apparent microphase spinodal ordering temperature increases with attraction range and rod length, and the microdomain coherence length strongly grows upon cooling. However, as the tail repulsion range increases significantly, the micellar morphology is destroyed and a new repulsion-driven ordering emerges at high volume fractions characterized by a much smaller spatial periodicity. We also find a tight correlation between the local attraction-induced clustering (quantified by the excess number of nearest neighbors) and the microdomain-scale ordering (measured by the amplitude of the intense low wavevector peak of the collective structure factor). Moreover, the former converges to a unique value at the microphase spinodal temperature for all volume fractions, repulsion strengths, and tail repulsion ranges studied, in qualitative contrast to the behavior of the repulsive-interaction driven ordering phenomena. Furthermore, the phase behavior trends of the integral equation approach are compared to a computationally and conceptually simpler mean field hybrid formulation based on a random phase approximation treatment of tail potentials, thereby allowing the role of physical clustering, interparticle correlations, and microdomain scale concentration fluctuations to be assessed.
Bicontinuous Polymeric Microemulsions from Polydisperse Diblock Copolymers
Abstract not provided
Robust upward dispersion of the neutron spin resonance in the heavy fermion superconductor Ce 1−x Yb x CoIn 5
The neutron spin resonance is a collective magnetic excitation that appears in the unconventional copper oxide, iron pnictide and heavy fermion superconductors. Although the resonance is commonly associated with a spin-exciton due to the d(s ± )-wave symmetry of the superconducting order parameter, it has also been proposed to be a magnon-like excitation appearing in the superconducting state. Here we use inelastic neutron scattering to demonstrate that the resonance in the heavy fermion superconductor Ce 1−x Yb x CoIn 5 with x=0, 0.05 and 0.3 has a ring-like upward dispersion that is robust against Yb-doping. By comparing our experimental data with a random phase approximation calculation using the electronic structure and the momentum dependence of the d x 2 -y 2 -wave superconducting gap determined from scanning tunnelling microscopy (STM) for CeCoIn 5 , we conclude that the robust upward-dispersing resonance mode in Ce 1−x Yb x CoIn 5 is inconsistent with the downward dispersion predicted within the spin-exciton scenario.
Structural phase transition, s ± -wave pairing, and magnetic stripe order in bilayered superconductor La 3 Ni 2 O 7 under pressure
Motivated by the recently discovered high-T c superconductor La 3 Ni 2 O 7 , we comprehensively study this system using density functional theory and random phase approximation calculations. At low pressures, the Amam phase is stable, containing the Y 2- mode distortion from the Fmmm phase, while the Fmmm phase is unstable. Because of small differences in enthalpy and a considerable Y 2- mode amplitude, the two phases may coexist in the range between 10.6 and 14 GPa, beyond which the Fmmm phase dominates. In addition, the magnetic stripe-type spin order with wavevector (π, 0) was stable at the intermediate region. Pairing is induced in the s ± -wave channel due to partial nesting between the M = (π, π) centered pockets and portions of the Fermi surface centered at the X = (π, 0) and Y = (0, π) points. This resembles results for iron-based superconductors but has a fundamental difference with iron pnictides and selenides. Moreover, our present efforts also suggest La 3 Ni 2 O 7 is qualitatively different from infinite-layer nickelates and cuprate superconductors.
Microscopic origin of Cooper pairing in the iron-based superconductor Ba 1-x K x Fe 2 As 2
Resolving the microscopic pairing mechanism and its experimental identification in unconventional superconductors is among the most vexing problems of contemporary condensed matter physics. We show that Raman spectroscopy provides an avenue towards this aim by probing the structure of the pairing interaction at play in an unconventional superconductor. As we study the spectra of the prototypical Fe-based superconductor Ba 1-x K x Fe 2 As 2 for 0.22 ≤ x ≤ 0.70 in all symmetry channels, Raman spectroscopy allows us to distill the leading s-wave state. In addition, the spectra collected in the B1g symmetry channel reveal the existence of two collective modes which are indicative of the presence of two competing, yet sub-dominant, pairing tendencies of d x 2 -y 2 symmetry type. A comprehensive functional Renormalization Group and random-phase approximation study on this compound confirms the presence of the two sub-leading channels, and consistently matches the experimental doping dependence of the related modes. In conclusion, the consistency between the experimental observations and the theoretical modeling suggests that spin fluctuations play a significant role in superconducting pairing.
High-energy magnetic excitations from heavy quasiparticles in CeCu 2 Si 2
Magnetic fluctuations is the leading candidate for pairing in cuprate, iron-based, and heavy fermion superconductors. This view is challenged by the recent discovery of nodeless superconductivity in CeCu 2 Si 2 , and calls for a detailed understanding of the corresponding magnetic fluctuations. Here, we mapped out the magnetic excitations in superconducting (S-type) CeCu 2 Si 2 using inelastic neutron scattering, finding a strongly asymmetric dispersion for E ≲ 1.5 meV, which at higher energies evolves into broad columnar magnetic excitations that extend to E ≳ 5 meV. While low-energy magnetic excitations exhibit marked three-dimensional characteristics, the high-energy magnetic excitations in CeCu 2 Si 2 are almost two-dimensional, reminiscent of paramagnons found in cuprate and iron-based superconductors. By comparing our experimental findings with calculations in the random-phase approximation, we find that the magnetic excitations in CeCu 2 Si 2 arise from quasiparticles associated with its heavy electron band, which are also responsible for superconductivity. Our results provide a basis for understanding magnetism and superconductivity in CeCu 2 Si 2 , and demonstrate the utility of neutron scattering in probing band renormalization in heavy fermion metals.
Superconductivity with extremely large upper critical fields in Nb2Pd0.81S5
Here, we report the discovery of superconductivity in a new transition metal-chalcogenide compound, i.e. Nb2Pd0.81S5, with a transition temperature Tc > 6.6 K. Despite its relatively low Tc, it displays remarkably high and anisotropic superconducting upper critical fields, e.g. m0Hc2 (T R 0 K) . 37 T for fields applied along the crystallographic b-axis. For a field applied perpendicularly to the b-axis, m0Hc2 shows a linear dependence in temperature which coupled to a temperature-dependent anisotropy of the upper critical fields, suggests that Nb2Pd0.81S5 is a multi-band superconductor. This is consistent with band structure calculations which reveal nearly cylindrical and quasi-one-dimensional Fermi surface sheets having hole and electron character, respectively. The static spin susceptibility as calculated through the random phase approximation, reveals strong peaks suggesting proximity to a magnetic state and therefore the possibility of unconventional superconductivity.
Incipient microphase separation in short chain perfluoropolyether-block-poly(ethylene oxide) copolymers
Here, incipient microphase separation is observed by wide angle X-ray scattering (WAXS) in short chain multiblock copolymers consisting of perfluoropolyether (PFPE) and poly(ethylene oxide) (PEO) segments. Two PFPE–PEO block copolymers were studied; one with dihydroxyl end groups and one with dimethyl carbonate end groups. Despite having a low degree of polymerization (N ~ 10), these materials exhibited significant scattering intensity, due to disordered concentration fluctuations between their PFPE-rich and PEO-rich domains. The disordered scattering intensity was fit to a model based on a multicomponent random phase approximation to determine the value of the interaction parameter, χ, and the radius of gyration, R g . Over the temperature range 30–90 °C, the values of χ were determined to be very large (~2–2.5), indicating a high degree of immiscibility between the PFPE and PEO blocks. In PFPE–PEO, due to the large electron density contrast between the fluorinated and non-fluorinated block and the high value of χ, disordered scattering was detected at intermediate scattering angles, (q ~ 2 nm -1 ) for relatively small polymer chains. Finally, our ability to detect concentration fluctuations was enabled by both a relatively large value of χ and significant scattering contrast.