Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

The QPO in RE J1034+396 Originates in the Hot Corona

RE J1034+396 is one of the few active galactic nuclei (AGNs) with a significant quasiperiodic oscillation (QPO). The QPO has been observed in over 1 Ms of XMM-Newton observations spanning over a decade. We investigate the power spectral density function (PSD) of seven long (∼90 ks) XMM-Newton observations of the AGN RE J1034+396 in two energy bands. The soft (0.3–0.5 keV) band targets emission from the disk, while the hard (2–7 keV) band isolates the primary X-ray continuum emission from the corona. The QPO is significantly detected in the hard band of five of the seven observations. The best-fitting models indicate that the QPO detection in both bands is entirely attributable to the coronal emission with no additional contribution from the disk. This explains the strong coherence between the hard and soft bands at the QPO frequency. The covariance spectrum is consistent with this picture as the variability at QPO frequencies is attributed solely to fluctuations in the hot corona. The time lag as a function of energy is well described by a ∼2000 s intrinsic soft lag, resulting from the disk responding to emission from the corona, that undergoes phase wrapping at approximately the QPO frequency. By demonstrating that in this system the QPO arises in the corona, we provide new insights into the mechanisms generating QPOs.

Active galactic nuclei↗

The navigation of a satellite re-encounter in a Jupiter Orbiter mission

Very often in the course of the Jupiter Orbiter-Satellite Tour mission it is desired to have the spacecraft re-encounter a satellite after one complete Jovicentric orbit whose period is resonant with that of the satellite for the purposes of orbit 'cranking' or 'pumping'. This paper develops the deterministic guidance strategy necessary for the implementation of such re-encounters (360 deg transfers). Both single impulse and fuel optimal multiple impulse guidance strategies are developed on the basis of which an estimate of the total navigational fuel cost for the mission is made.

Sherman, G. N.↗

Re-evaporation of condensed matter during the formation of the solar system

From the properties of matter the conclusion is derived that the mineral assemblage characteristic of most chondritic meteorites is not at all what is expected to form directly from solar matter. Rather, the major minerals of the ordinary chondrites have chemical compositions indicative of formation from a medium greatly depleted in hydrogen and somewhat deficient in oxygen relative to solar elemental abundance ratios. The re-evaporation of condensed material, after separation from a large fraction of the gaseous components of solar matter, will lead to a medium of the appropriate composition. Such re-evaporation must have occurred at a time prior to the formation of many primitive meteorites.

Herndon, J. M.↗

The ilmenite/titano-magnetite assemblage - Kinetics of re-equilibration

The petrogenesis of igneous and metamorphic rocks is a function of several parameters. Of these, temperature and pressure are of particular importance. Information concerning these two parameters is obtained through the use of mineral indicators. One such commonly used geothermometer/oxybarometer is that involving ilmenite/titano-magnetite. Anomalously low temperatures have been reported in cases in which the geothermometer/oxybarometer was employed. The studies suggest that low temperatures result from slow cooling rates which allows the Fe-Ti oxides to re-equilibrate. The current investigation is mainly concerned with the kinetics of the reduction of ilmenite-hematite solid solution, since this is the slower and, consequently, rate-controlling step in the re-equilibration process. The reaction rates determined for the reduction of ilmenites in the investigation are geologically rapid and must be considered when applying the considered geothermometer/oxybarometer.

Hammond, P. A.↗

Ru, Re, Os, Pt and Au in iron meteorites

Neutron activation analysis is used to ascertain the proportions of Ru, Re, Os, and Pt refractory siderophiles, and moderately volatile Au, in 41 iron meteorites. The Ni-element trends defined for groups IID and IIIF support a magmatic origin; in addition, the results obtained for groups IAB and IIICD contrast with trends observed in magmatic groups, where the Ru and Pt slopes are substantially less steep. In group IIIAB, at Ni concentrations above 90 mg/g, the steep decrease of Re, Os, and Ir with Ni levels off, and the interelement ratios exhibit considerable scatter. These observations may be explained in terms of the contamination of the residual molten core with small amounts of late primitive melts draining from the mantle.

Pernicka, Ernst↗

Effect of acoustic excitation on the flow over a low-Re airfoil

Wind-tunnel measurements of lift, drag, and wake velocity spectra were carried out under (tonal) acoustic excitation for a smooth airfoil in the chord-Reynolds-number Re(c) range of 40,000-140,000. The data were supported by smoke-wire flow-visualization pictures. Small-amplitude excitation in a wide, low-frequency range is found to eliminate laminar separation that otherwise degrades the airfoil performance at low Re(c) near the design angle of attack. Excitation at high frequencies eliminates a prestall, periodic shedding of large-scale vortices. Significant improvement in lift is also achieved during poststall, but with large-amplitude excitation. Wind-tunnel resonances strongly influence the results, especially in cases requiring large amplitudes.

Zaman, K. B. M. Q.↗

Transitions in Fe-, Co-, Cu-, and Zn-like ions of W and Re

The spectra of highly ionized W and Re were observed by using laser-produced plasmas and a 3-m grazing-incidence spectrograph. Transitions in Fe- through Zn-like ions were identified. Wavelengths in the range 7-75 A were measured with an uncertainty of + or - 0.015 A, and energy levels were derived from the measured wavelengths. The ionization limits of Cu-like W and Re were determined.

Seely, J. F.↗

Pupil geometry and pupil re-imaging in telescope arrays

This paper considers the issues of lateral and longitudinal pupil geometry in ground-based telescope arrays, such as IOTA. In particular, it is considered whether or not pupil re-imaging is required before beam combination. By considering the paths of rays through the system, an expression is derived for the optical path errors in the combined wavefront as a function of array dimensions, telescope magnification factor, viewing angle, and field-of-view. By examining this expression for the two cases of pupil-plane and image-plane combination, operational limits can be found for any array. As a particular example, it is shown that for IOTA no pupil re-imaging optics will be needed.

Traub, Wesley A.↗

Observations of plasma sheet expansion at substorm onset, R = 15 to 22 Re

We have used a large number of auroral magnetograms to identify four isolated substorms and estimate their onset times. At the onsets, ISEE-1 was in the vicinity of magnetic midnight at radial distances of 15.6 to 21.8 Re and very near the outer boundary of the plasma sheet. We find that, for each event, the plasma sheet expanded, and the magnetic field dipolarized at the inferred onset time. Our most definitive event occurred while ISEE was at a geocentric radial distance of 21.8 Re. This result conflicts with previous understanding, though further verification of the result is required. Our observations show very similar characteristics to those observed at synchronous orbit, and they are consistent with an extension of a portion of the substorm current wedge to the radial distance of the satellite. If this explanation is correct, ISEE must have been within the longitude range of the substorm current wedge at the onsets.

Lyons, L. R.↗

RE 1016-053 - A pre-cataclysmic binary, and the first extreme ultraviolet and X-ray detections of a DAO white dwarf

Photometric observations and analysis of the optical, UV, EUV, and X-ray spectra are presented for the EUV/X-ray source RE 1016-53. Multiwavelength observations of RE 1016-53 point out that it is a precataclysmic binary. Optical spectra exhibit the steep blue continuum and Balmer absorption typical of a hot white dwarf, but there are bright, narrow emission lines of H I, He I, and Ca II superimposed on this. The white dwarf component, with T (eff) = 55,800 +/- 1000 K and log g = 7.81 +/- 0.007, dominates the spectrum from the optical to the EUV/X-ray. An He II 4686 A absorption line suggests that the white dwarf is a hydrogen-helium (DAO) hybrid star. Four of the five precataclysmic binaries with white dwarfs with T(eff) greater than 40,000 K appear to be DAOs. A mass of 0.57 +/- 0.003 solar mass has been derived.

Tweedy, R. W.↗

Survey of nonequilibrium re-entry heating for entry flight conditions

A viscous shock layer method has been developed which includes the effects of chemical and thermal nonequilibrium and is coupled with a radiation analysis which includes thermodynamic nonequilibrium effects. This code has been used to obtain solutions for a wide variety of nonequilibrium re-entry conditions in air. The results are tabulated and displayed graphically. Comparisons are made to similar results obtained for radiatively coupled equilibrium flow and conclusions drawn on the effect of nonequilibrium and in particular thermodynamic nonequilibrium on the radiative environment about re-entry vehicles.

Gally, Thomas A.↗

Re-Os dating of 3AB iron meteorites

Recently, Creaser et al., and Volkening and Heumann, have demonstrated the efficient production of large (approximately 10 exp -11 A) ion beams by negative thermal ionization mass spectrometry (NTIMS) using standard laboratory solutions of Os compounds. Horan et al., have applied NTIMS to a group of 7 IIA iron meteorites and obtained a Re-Os closure age of 4596 +/- 152 million years. The initial Os-187/Os-186 ratio was 0.8007 plus or minus 0.0029. In addition they analyzed 3 IIIA meteorite samples which indicated an age of 4554 +/- 180 million years and Os initial of 0.8120 +/- 0.0075 which does not overlap with the initial for the IIA irons. We have been independently pursuing a similar program with the direct aim of determining possible variations in the initial (Os-187)/(Os-186) ratio or Re-Os closure age of different classes of iron meteorite. We have applied NTIMS to Os extracted from the most common group of iron meteorites the IIIAB. These meteorites are believed to be of magmatic origin, formed by fractional crystallization of molten cores of asteroidal bodies. The present results point to a significantly lower initial (Os-187)/(Os-186) ratio of 0.7731 plus or minus 0.0050 than previously determined.

Esat, Tezer M.↗

Development and application of an empirical probability distribution for the prediction error of re-entry body maximum dynamic pressure

The relationship between actual and predicted re-entry maximum dynamic pressure is characterized using a probability density function and a cumulative distribution function derived from sounding rocket flight data. This paper explores the properties of this distribution and demonstrates applications of this data with observed sounding rocket re-entry body damage characteristics to assess probabilities of sustaining various levels of heating damage. The results from this paper effectively bridge the gap existing in sounding rocket reentry analysis between the known damage level/flight environment relationships and the predicted flight environment.

Lanzi, R. James↗

Backward-facing step measurements at low Reynolds number, Re(sub h)=5000

An experimental study of the flow over a backward-facing step at low Reynolds number was performed for the purpose of validating a direct numerical simulation (DNS) which was performed by the Stanford/NASA Center for Turbulence Research. Previous experimental data on back step flows were conducted at Reynolds numbers and/or expansion ratios which were significantly different from that of the DNS. The geometry of the experiment and the simulation were duplicated precisely, in an effort to perform a rigorous validation of the DNS. The Reynolds number used in the DNS was Re(sub h)=5100 based on step height, h. This was the maximum possible Reynolds number that could be economically simulated. The boundary layer thickness, d, was approximately 1.0 h in the simulation and the expansion ratio was 1.2. The Reynolds number based on the momentum thickness, Re(sub theta), upstream of the step was 610. All of these parameters were matched experimentally. Experimental results are presented in the form of tables, graphs and a floppy disk (for easy access to the data). An LDV instrument was used to measure mean velocity components and three Reynolds stresses components. In addition, surface pressure and skin friction coefficients were measured. LDV measurements were acquired in a measuring domain which included the recirculating flow region.

Jovic, Srba↗

Re-engineering the mission life cycle with ABC and IDEF

The theory behind re-engineering a business process is to remove the non-value added activities thereby lowering the process cost. In order to achieve this, one must be able to identify where the non-value added elements are located which is not a trivial task. This is because the non-value added elements are often hidden in the form of overhead and/or pooled resources. In order to be able to isolate these non-value added processes from among the other processes, one must first decompose the overall top level process into lower layers of sub-processes. In addition, costing data must be assigned to each sub-process along with the value the sub-process adds towards the final product. IDEF0 is a Federal Information Processing Standard (FIPS) process-modeling tool that allows for this functional decomposition through structured analysis. In addition, it illustrates the relationship of the process and the value added to the product or service. The value added portion is further defined in IDEF1X which is an entity relationship diagramming tool. The entity relationship model is the blueprint of the product as it moves along the 'assembly line' and therefore relates all of the parts to each other and the final product. It also relates the parts to the tools that produce the product and all of the paper work that is used in their acquisition. The use of IDEF therefore facilitates the use of Activity Based Costing (ABC). ABC is an essential method in a high variety, product-customizing environment, to facilitate rapid response to externally caused change. This paper describes the work being done in the Mission Operations Division to re-engineer the development and operation life cycle of Mission Operations Centers using these tools.

Mandl, Daniel↗

Asymmetric mass accretion in the magnetic cataclysmic variable RE 1149 + 28

We present the first detailed extreme photometric observations of a magnetic cataclysmic variable. Our two Extreme Ultraviolet Explorer (EUVE) observations of the AM Her star RE 1149 + 28 were obtained about 1 yr apart and show light-curve variations on orbital to yearly timescales, as well as long-term mean flux level changes of a factor of 2. The photometric data show a persistent ingress EUV enhancement which lasts approximately 0.04 in phase. We attribute this to a region of approximately 10(exp 3) km in extent at the accretion impact site, on or very near the surface of the white dwarf primary. Our observations of RE 1149 are consistent with a relatively low system inclination and provide a best-fit orbital period of 90.14 +/- 0.015 minutes.

Howell, Steve B.↗

A spatially adaptive spectral re-ordering technique for lossless coding of hyper-spectral images

In this paper, we propose a new approach, applicable to lossless compression of hyper-spectral images, that alleviates some limitations of linear prediction as applied to this problem. According to this approach, an adaptive re-ordering of the spectral components of each pixel is performed prior to prediction and encoding. This re-ordering adaptively exploits, on a pixel-by pixel basis, the presence of inter-band correlations for prediction. Furthermore, the proposed approach takes advantage of spatial correlations, and does not introduce any coding overhead to transmit the order of the spectral bands. This is accomplished by using the assumption that two spatially adjacent pixels are expected to have similar spectral relationships. We thus have a simple technique to exploit spectral and spatial correlations in hyper-spectral data sets, leading to compression performance improvements as compared to our previously reported techniques for lossless compression. We also look at some simple error modeling techniques for further exploiting any structure that remains in the prediction residuals prior to entropy coding.

Memon, Nasir D.↗

An Experimental Study of a Separated/Reattached Flow Behind a Backward-Facing Step. Re(sub h) = 37,000

An experimental study was carried out to investigate turbulent structure of a two-dimensional incompressible separating/reattaching boundary layer behind a backward-facing step. Hot-wire measurement technique was used to measure three Reynolds stresses and higher-order mean products of velocity fluctuations. The Reynolds number, Re(sub h), based on the step height, h, and the reference velocity, U(sub 0), was 37,000. The upstream oncoming flow was fully developed turbulent boundary layer with the Re(sub theta) = 3600. All turbulent properties, such as Reynolds stresses, increase dramatically downstream of the step within an internally developing mixing layer. Distributions of dimensionless mean velocity, turbulent quantities and antisymmetric distribution of triple velocity products in the separated free shear layer suggest that the shear layer above the recirculating region strongly resembles free-shear mixing layer structure. In the reattachment region close to the wall, turbulent diffusion term balances the rate of dissipation since advection and production terms appear to be negligibly small. Further downstream, production and dissipation begin to dominate other transport processes near the wall indicating the growth of an internal turbulent boundary layer. In the outer region, however, the flow still has a memory of the upstream disturbance even at the last measuring station of 51 step-heights. The data show that the structure of the inner layer recovers at a much faster rate than the outer layer structure. The inner layer structure resembles the near-wall structure of a plane zero pressure-gradient turbulent boundary layer (plane TBL) by 25h to 30h, while the outer layer structure takes presumably over 100h.

Jovic, Srba↗