Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Anisotropic Fano resonance in the Weyl semimetal candidate LaAlSi

Topological Weyl semimetal (WSM) is a solid-state realization of chiral Weyl fermions, whose phonon behaviors provide in-depth knowledge of their electronic properties. In this work, anisotropic Fano resonance is observed in a type-II WSM candidate LaAlSi by polarized Raman spectroscopy. The asymmetric line shape occurs for the $B^2_1$ phonon mode of LaAlSi only for 488- and 532-nm laser excitations but not for 364-, 633-, and 785-nm excitations, suggesting the excitation selectivity. The asymmetry, frequency, and linewidth of the $B^2_1$ phonon mode, along with the spectral background, all show fourfold rotational symmetry as a function of the polarization angle in the polarized Raman spectra. While the shift of Raman frequency in a metal or semimetal is typically attributed to Kohn anomaly, here we show that the anisotropic frequency shift in LaAlSi cannot be explained by the effect of Kohn anomaly, but potentially by the anisotropic scattering background of Fano resonance. Origins of the excitation-energy dependence and anisotropic behavior of the Fano resonance are discussed by the first-principles calculated electronic band structure and phonon dispersion.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

In-Situ Raman Indentation of ??-Eucryptite: Characterization of the Pressure Induced Phase Transformation

A pressure-induced phase transformation in the lithium aluminum silicate -eucryptite was studied with in-situ Raman spectroscopy. Dense -eucryptite composites were made via powder synthesis followed by sintering. The specimens were then subjected to diamond indentation up to applied contact stresses of about 8 GPa, while collecting Raman spectra. The appearance of a Raman peak (~520 cm-1) at a contact stress of about 3 GPa likely corresponds to the reversible phase transformation of -eucryptite to the orthorhombic phase -eucryptite. Loading and unloading in-situ Raman indentation experiments are discussed with regards to this transformation.

36 MATERIALS SCIENCE↗

Synthesis, characterization and effect of low energy Ar ion irradiation on gadolinium oxide nanoparticles

Graphical abstract: . The figure depicts Raman spectra of (A) unirradiated and (B) 80 keV Ar ion irradiated nanoscale gadolinium oxide (Gd{sub 2}O{sub 3}) systems. Intense Raman signals corresponding to two B{sub g} modes at 288 and 384 cm{sup -1} are observed for irradiated sample along with the evolution of a new peak at 202 cm{sup -1} due to surface defects. Highlights: {yields} Gadolinium oxide nanoparticles are synthesized via a selective reduction route. {yields} 80 keV Ar ion-irradiated specimen showed better symmetric emission than pristine. {yields} Irradiation led point defect contribution was studied through spectroscopic means. -- Abstract: In this work, we report on the surfactant assisted synthesis of gadolinium oxide (Gd{sub 2}O{sub 3}) nanoparticles and their characterization through various microscopic and spectroscopic tools. Exhibiting a monoclinic phase, the nanoscale Gd{sub 2}O{sub 3} particles are believed to be comprising of crystallites with an average size of {approx}3.2 nm, as revealed from the X-ray diffraction analysis. The transmission electron microscopy has predicted a particle size of {approx}9 nm and an interplanar spacing of {approx}0.28 nm. Fourier transform infrared spectroscopy studies show that Gd-O inplane vibrations at 536.8 and 413.3 cm{sup -1} were more prominent for 80-keV Ar-ion irradiated Gd{sub 2}O{sub 3} nanosystem than unirradiated system. The photoluminescence (PL) spectra of irradiated specimen have revealed an improvement in the symmetry factor owing to significant enhancement of surface-trap emission, compared to the band-edge counterpart. Irradiation induced creation of point defects (oxygen vacancies) were predicted both from PL and electron paramagnetic resonance (EPR) studies. Further, the Raman spectra of the irradiated sample have exhibited notable vibrational features along with the evolution of a new peak at {approx}202 cm{sup -1}. This can be ascribed to an additional Raman active vibrational response owing to considerable modification of the nanostructure surface as a result of ion bombardment. Probing nanoscale defects through prime spectroscopy tools would find a new avenue for precise tuning of physical properties with generation and annihilation of defects.

36 MATERIALS SCIENCE↗

The influence of Fe on the formation of titanosilicate ETS-4

ETS-4 has potential applications for the size-selective adsorption and ion exchange. Iron substituted ETS-4 has been hydrothermally synthesized. The incorporation with different amount of iron has been achieved to produce Fe-ETS-4(x) (x=5-13), which shows the flexibility for iron substitution. Low amount of iron in precursor does not disturb the formation of ETS-4. The existence of iron was confirmed by EDS. Direct comparison between in-situ synthesized and iron exchanged samples suggested that iron in former ones does not exist in pore. The iron in the pore of ETS-4 would significantly shift the {sup 29}Si MAS NMR resonance upfield. While in-situ synthesized Fe-ETS-4(x) samples present very similar FTIR and Raman spectra, TG and DSC curves to ETS-4, the iron exchanged ones are clear shifted. The thermal stability of in-situ synthesized Fe-ETS-4(x) samples is very similar to the parent phase, much better than that of iron exchanged one. - Graphical abstract: ETS-4 with different amount of iron has been hydrothermally synthesized. The structure shows the flexibility for iron substitution. The thermal stability of in-situ synthesized ETS-4 is much better than that of iron exchanged one. Highlights: Black-Right-Pointing-Pointer ETS-4 with different amount of iron has been hydrothermally synthesized. Black-Right-Pointing-Pointer ETS-4 structure shows the flexibility for iron substitution. Black-Right-Pointing-Pointer The thermal stability of in-situ synthesized ETS-4 is much higher than that of iron exchanged one.

36 MATERIALS SCIENCE↗

Preparation and characterization of solar exfoliated graphene

Hummer's method was used for the chemical synthesis of graphite oxide from graphite flakes. Simultaneous exfoliation and reduction of graphite oxide to Graphene was achieved through focused solar light irradiation using a convex lens. The morphological characteristics were studied using SEM and TEM. Layered morphology of Graphene was observed through TEM. Raman spectra and FTIR were used for the structural characterization of Graphene. EDAX analysis showed the drop in oxygen content during exfoliation. The method offered a faster, easier and environmental friendly method to produce Graphene for potential applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Charge transfer and optical properties of wurtzite-type ZnS/(CdS/ZnS){sub n} (n = 2, 4, 8) superlattices

Graphical abstract: (a) Normalized temperature-dependent PL spectra of ZnS/(CdS/ZnS){sub 4} superlattices from 5 to 300 K and (b) schematic of charge transfer at CdS/ZnS interface. - Highlights: • Wurtzite ZnS/(CdS/ZnS){sub n} superlattices were prepared at 100 °C by pulsed laser deposition. • Surface phonon of ZnS and multiple phonons modes of ZnS and CdS were observed. • The charge transfer of electrons from CdS electron to ZnS holes by excitation energy was found. - Abstract: ZnS/(CdS/ZnS){sub n} (n = 2, 4, 8) superlattices were deposited on sapphire substrate by pulsed laser deposition (PLD) with alternate cadmium sulfide (CdS) and zinc sulfide (ZnS) crystals at 100 °C. The prepared samples with an average thickness of ∼30 nm for ZnS layer and ∼60 nm for CdS layer have a wurtzite-type structure. Surface phonon of ZnS and multiple phonons modes for ZnS and CdS were observed from Raman spectra. PL spectra show a strong green emission at ∼496 nm, two weak emission bands at ∼400 and ∼577 nm, where the emission band at 400 nm was attributed to the recombination of surface defects states to valence, the emission band at 577 nm as the recombination of Cd{sub i}–V{sub Cd} centers, and the strong emission at ∼496 nm is from the charge transfer of electrons from CdS electron to ZnS holes by excitation energy.

36 MATERIALS SCIENCE↗

White light generation from Dy{sup 3+}-doped ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5} glasses

Dysprosium doped ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5} (ZBP) glasses were prepared by a conventional melt quenching technique in order to study the luminescent properties and their utility for white light emitting diodes (LEDs). X-ray diffraction spectra revealed the amorphous nature of the glass sample. The present glasses were characterized by infrared and Raman spectra to evaluate the vibrational features of the samples. The emission and excitation spectra were reported for the ZBP glasses. Strong blue (484 nm) and yellow (574 nm) emission bands were observed upon various excitations. These two emissions correspond to the {sup 4}F{sub 9/2}->{sup 6}H{sub 15/2} and {sup 4}F{sub 9/2}->{sup 6}H{sub 13/2} transitions of Dy{sup 3+} ions, respectively. Combination of these blue and yellow bands gives white light to the naked eye. First time, it was found that ZnO-B{sub 2}O{sub 3}-P{sub 2}O{sub 5} glasses efficiently emit white light under 400 and 454 nm excitations, which are nearly match with the emissions of commercial GaN blue LEDs and InGaN LED, respectively. CIE chromaticity coordinates also calculated for Dy{sup 3+}: ZBP glasses to evaluate the white light emission.

36 MATERIALS SCIENCE↗

Synthesis of Se nanoparticles by using TSA ion and its photocatalytic application for decolorization of cango red under UV irradiation

In this study, we describe a size-controlled synthesis of selenium nanoparticles based on the reduction of selenious acid (H{sub 2}SeO{sub 3}) by UV-irradiated tungstosilicate acid (H{sub 4}SiW{sub 12}O{sub 40}, TSA) solution which serves both as reducing reagent and stabilizer. The nanoparticles are characterized by ultraviolet-visible spectroscopy (UV-vis), Fourier transform infrared spectroscopy (FTIR), X-ray diffraction analysis (XRD), X-ray photoelectron spectroscopy (XPS), the Raman spectra, transmission electron microscopy (TEM) and Zetasizer, respectively. The characteristic catalytic behavior of the Se nanoparticles is established by studying the decolorization of cango red in the presence of UV light. It is obvious that selenium catalyzes the reaction efficiently. The results show that the rate of dye decolorization varies linearly with the nanoparticle concentration and the rate of dye decolorization decreases with the size of the Se nanoparticles increasing.

36 MATERIALS SCIENCE↗

Synthesis of Sn-doped ZnO nanorods and their photocatalytic properties

Graphical abstract: Sn-doped ZnO nanorods have been fabricated by a hydrothermal route. Photocatalytic activity of the Sn-doped ZnO samples increases gradually with an increase of the Sn content. Highlights: {yields} Sn-doped ZnO nanorods were fabricated by a hydrothermal route. {yields} Solid-state NMR result confirms Sn{sup 4+} was incorporated into the lattice of ZnO. {yields} The visible luminescence intensity increased with increase in Sn concentration. {yields} Photocatalytic activity of Sn-doped ZnO increases with increasing Sn content. -- Abstract: Sn-doped ZnO nanorods were fabricated by a hydrothermal route, and characterized by X-ray diffraction, field emission scanning electron microscope, UV-vis spectroscopy, Raman spectra, solid-state nuclear magnetic resonance (NMR) spectra, and room temperature photoluminescence spectroscopy. Solid-state NMR result confirms that Sn{sup 4+} was successfully incorporated into the crystal lattice of ZnO. Room temperature photoluminescence showed that all the as-synthesized products exhibited a weak UV emission (380 nm) and a strong visible emission (540 nm), but the intensities of the latter emission increased with increase in Sn concentration. The improvement of visible emission at 540 nm in the Sn-doped ZnO samples was suggested to be a result of the lattice defects increased by doping of Sn in zinc oxide. In addition, the photocatalytic studies indicated that Sn-doped ZnO nanorods are a kind of promising photocatalyst in remediation of water polluted by some chemically stable azo dyes.

36 MATERIALS SCIENCE↗

Annealing studies of heteroepitaxial InSbN on GaAs grown by molecular beam epitaxy for long-wavelength infrared detectors

We report the effect of annealing on the structural, vibrational, electrical, and optical properties of heteropepitaxially grown InSbN epilayers on GaAs substrate by molecular beam epitaxy for long-wavelength infrared detector applications. As-grown epilayers exhibited high N incorporation in the both substitutional and interstitial sites, with N induced defects as evidenced from high resolution x-ray diffraction, secondary ion mass spectroscopy, and room temperature (RT) micro-Raman studies. The as-grown optical band gap was observed at 0.132 eV ({approx}9.4 {mu}m) and the epilayer exhibited high background carrier concentration at {approx}10{sup 18} cm{sup -3} range with corresponding mobility of {approx}10{sup 3} cm{sup 2}/Vs. Ex situ and in situ annealing at 430 Degree-Sign C though led to the loss of N but improved InSb quality due to effective annihilation of N related defects and other lattice defects attested to enhanced InSb LO phonon modes in the corresponding Raman spectra. Further, annealing resulted in the optical absorption edge red shifting to 0.12 eV ({approx}10.3 {mu}m) and the layers were characterized by reduced background carrier concentration in the {approx}10{sup 16} cm{sup -3} range with enhanced mobility in {approx}10{sup 4} cm{sup 2}/Vs range.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

A reevaluation of the assignment of the vibrational fundamentals and the rotational analysis of bands in the high-resolution infrared spectra of trans- and cis- 1,3,5-hexatriene

Assignments of the vibrational fundamentals of cis- and trans-1,3,5-hexatriene are reevaluated with new infrared and Raman spectra and with quantum chemical predictions of intensities and anharmonic frequencies. The rotational structure is analyzed in the high-resolution (0.0013-0.0018 cm -1) infrared spectra of three C-type bands of the trans isomer and two C-type bands of the cis isomer. The bands for the trans isomer are at 1010.96 cm-1 (v14), 900.908 cm-1 (v16), and 683.46 cm-1 (v17). Ground state (GS) rotational constants have been fitted to the combined ground state combination differences (GSCDs) for the three bands of the trans isomer. The bands for the cis isomer are at 907.70 cm-1 (v33) and 587.89 cm-1 (v35). GS rotational constants have been fitted to the combined GSCDs for the two bands of the cis isomer and compared with those obtained from microwave spectroscopy. Small inertial defects in the GSs confirm that both molecules are planar. Upper state rotational constants were fitted for all five bands.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

XRD, Electron Microscopy and Vibrational Spectroscopy Characterization of Simulated High-Fe/Al HLW Glasses - 15666

Sample glasses have been made using SB6 high level waste (HLW) simulant (high in both Al and Fe) with 12 different frit compositions at a constant waste loading of 36 wt.%. As follows from X-ray diffraction (XRD) and optical and scanning electron microscopy (SEM) data, all the samples are composed of primarily glass and minor concentration of spinel phases which form both isometric grains and fine cubic (∼1 μm) crystals. Infrared (IR) spectra of all the glasses within the range of 400-1600 cm-1 consist of the bands due to stretching and bending modes in silicon-oxygen, boron-oxygen, aluminum-oxygen and iron-oxygen structural groups. Raman spectra showed that for the spectra of all the glasses within the range of 850-1200 cm{sup -1} the best fit is achieved by suggestion of overlapping of three major components with maxima at 911-936 cm{sup -1}, 988-996 cm{sup -1} and 1020-1045 cm{sup -1}. The structural network is primarily composed of metasilicate chains and possibly rings with embedded AlO{sub 4} and FeO{sub 4} tetrahedra. Major BO{sub 4} tetrahedra and BO{sub 3} triangles form complex borate units and are present as separate constituents. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Influence of Sm2O3 addition on Judd-Ofelt parameters, thermal and optical properties of the TeO2-Li2O-ZnO-Nb2O5 glass system

Highlights: • Synthesis of Sm{sub 2}O{sub 3} doped TeO{sub 2}-Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} glass to be used in optical devices. • Area under the peak calculations of FTIR and Raman display higher presence of BOs. • DSC plots indicate high stability and high rigidity of prepared glass samples. • Judd-Ofelt analysis shows the ionic nature of Sm{sup 3+} ions with neighboring atoms. • Higher branching ratio values obtained from {sup 6}H{sub 5/2} → {sup 6}F{sub 5/2} emission transition. - Abstract: A series of transparent and light yellow color samples composed of Sm{sub 2}O{sub 3} doped tellurium oxide glasses with chemical composition 75TeO{sub 2}-5Li{sub 2}O-10ZnO-(10-X) Nb{sub 2}O{sub 5}-XSm{sub 2}O{sub 3} was prepared by conventional melt-quenching technique. Rare earth (Sm{sub 2}O{sub 3}) was added to improve all glass properties. From obtained radiative properties, the samples which prepared with above composition can be considered as a prospect application for laser design due to higher branching ratio. The physical properties including sample density, molar volume, and OPD were measured. The glassy nature is approved by XRD analysis. The structural modification of glass forming units with introducing Sm{sub 2}O{sub 3} was studied by FTIR and Raman spectra. The intensity ratio of TeO{sub 4}/TeO{sub 3} was measured to determine the ratio of bridging/non-bridging oxygen exists in glass network. Glass thermal stability, glass transition temperature, and melting temperature were obtained from DSC plots. The UV–vis-NIR absorption spectra display 9 peaks. Optical parameters including optical band gap E{sub Opt}, Urbach energy ΔE and refractive index n were determined. From absorption spectra, Judd-Ofelt intensity parameters (Ω{sub λ} and λ = 2, 4, 6) have been derived to study bonding nature. A spectroscopic quality factor was calculated. Branching ratio (β{sub r}) and lifetime (τ) have been calculated using JO parameters. Absorption and emission cross-sections were determined to measure the probability of an absorption or emission process. Finally, we propose that these prepared samples can be used in optical devices and other applications.

36 MATERIALS SCIENCE↗

Structure and superconductivity of isotope-enriched boron-doped diamond

Superconducting boron-doped diamond samples were synthesized with isotopes of {sup 10}B, {sup 11}B, {sup 13}C and {sup 12}C. We claim the presence of a carbon isotope effect on the superconducting transition temperature, which supports the 'diamond-carbon'-related nature of superconductivity and the importance of the electron-phonon interaction as the mechanism of superconductivity in diamond. Isotope substitution permits us to relate almost all bands in the Raman spectra of heavily boron-doped diamond to the vibrations of carbon atoms. The 500 cm{sup 01} Raman band shifts with either carbon or boron isotope substitution and may be associated with vibrations of paired or clustered boron. The absence of a superconducting transition (down to 1.6 K) in diamonds synthesized in the Co-C-B system at 1900 K correlates with the small boron concentration deduced from lattice parameters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Growth and characterization of nonlinear optical telluromolybdate CoTeMoO{sub 6} single crystals

Nonlinear optical (NLO) crystals CoTeMoO{sub 6} have been grown from high temperature solution by means of spontaneous crystallization. These crystals have been characterized by temperature-dependent X-ray diffraction, infrared and electron absorption methods. Moreover, polarized Raman spectra have been measured at room temperature. These studies showed that the Mo{sup 6+} and Te{sup 4+} ions are in asymmetric coordination environment, and CoTeMoO{sub 6} has the largest flexibility index among MTeMoO{sub 6} family of telluro-molybdates (M=Zn, Mg, Cd, Mn, Co), making this compound attractive NLO material. Raman and IR studies allowed assigning the observed modes to respective motions of atoms in the unit cell. They have also showed evidence for spin–phonon coupling at low temperatures and suggested that CoTeMoO{sub 6} is prospective material for solid-state Raman laser-frequency converters. Analysis of electron absorption data has shown that Co{sup 2+} ions are located in sites of weak crystal field with the crystal field parameters Dq and B equal to 548 cm{sup −1} and 882 cm{sup −1}, respectively. - Graphical abstract: View of CoTeMoO{sub 6} crystal structure along the b-axis. - Highlights: • Single crystals of nonlinear optical telluromolybdate CoTeMoO{sub 6} were grown. • Crystal structure was solved by means of single crystal X-ray diffraction. • Raman and IR spectra were measured and analyzed. • Crystal field strength acting on Co{sup 2+} ions was established from analysis of electron absorption spectra.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Multi-wavelength Raman scattering of nanostructured Al-doped zinc oxide

In this work we present a detailed Raman scattering investigation of zinc oxide and aluminum-doped zinc oxide (AZO) films characterized by a variety of nanoscale structures and morphologies and synthesized by pulsed laser deposition under different oxygen pressure conditions. The comparison of Raman spectra for pure ZnO and AZO films with similar morphology at the nano/mesoscale allows to investigate the relation between Raman features (peak or band positions, width, relative intensity) and material properties such as local structural order, stoichiometry, and doping. Moreover Raman measurements with three different excitation lines (532, 457, and 325 nm) point out a strong correlation between vibrational and electronic properties. This observation confirms the relevance of a multi-wavelength Raman investigation to obtain a complete structural characterization of advanced doped oxide materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Raman Scattering in AlN Crystals Grown by Sublimation on SiC and AlN Seeds

The Raman-scattering technique is used to analyze the structural quality of bulk AlN crystals grown by sublimation on SiC and AlN seeds. Growth on SiC seeds is conducted with retention of the SiC seed during growth (type 1) and with total evaporation of the SiC seed (type 2). Growth on AlN seeds is conducted in tungsten containers with no graphite parts (type 3). According to the analysis of Raman spectra, the highest quality is inherent in type-3 crystals that exhibit minimal full widths at half maximum of Raman lines. The experimentally observed specific features are defined by differences in the mechanism of growth and by the content of dopant impurities in the crystals grown.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, structure characterization and fluorescence property of a new fluoride borate crystal, CdZn{sub 2}KB{sub 2}O{sub 6}F

A new fluoride borate crystal, CdZn{sub 2}KB{sub 2}O{sub 6}F, has been synthesized by flux-supported solid-state reaction. The crystal structure has been determined by single-crystal X-ray diffraction. It crystallizes in the trigonal space group P3-barc1 with a=5.0381(6) A, b=5.0381(6) A, c=15.1550(19) A, alpha=90.00{sup o}, beta=90.00{sup o}, gamma=120.00{sup o}, Z=2. The crystal represents a new structure type in which ZnBO{sub 3} layers are connected through bridging fluorine and cadmium atoms alternately along the c-axis. K{sup +} cations are filled in the intralayer open channels to balance charge. IR and Raman spectra further confirm the crystal structure. Photoluminescent measurement reveals that CdZn{sub 2}KB{sub 2}O{sub 6}F exhibits blue fluorescence at room temperature in the solid-state. - Graphical abstract: Preparation, structure and fluorescence property of a new fluoride borate crystal, CdZn{sub 2}KB{sub 2}O{sub 6}F are descripted. The crystal represents a new structure type in which ZnBO{sub 3} layers are connected through bridging fluorine and cadmium atoms alternately to form a 3D open framework.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗