Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “RAMAN SPECTRA”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

On the Morphology and Optical Properties of Molybdenum Disulfide Nanostructures from a Monomolecular Layer to a Fractal-Like Substructure

The impact of layer thickness on the morphology and optical properties of MoS{sub 2} nanostructures, including monomolecular layers, formed by the carrier-gas-assisted transport of sulfur vapor to the hot zone of a reactor containing metallic molybdenum and subsequent deposition on mica (muscovite) substrates is investigated. Molybdenum disulfide nanostructures of different thicknesses grown at different temperatures of gas-transport synthesis are studied by atomic-force microscopy, optical absorption spectroscopy, and Raman spectroscopy. It is found that synthesis at temperatures of 525–600°C makes it possible to obtain monomolecular MoS{sub 2} layers containing trigonal domains and featuring direct-gap optical transitions at 1.84 eV with the formation of excitons at room temperature. Fractal-type MoS{sub 2} substructures are obtained for the first time. The frequencies of intralayer and interlayer vibrational modes E{sub 2g}{sup 1} and A{sub 1g}, respectively, in their Raman spectra (377.5 and 403.8 cm{sup –1}, respectively) differ both from the corresponding values for a monomolecular layer and the known frequencies for bulk samples. The frequency of the E{sub 2g}{sup 1} intralayer mode in these samples (377.5 cm{sup –1}) is the lowest of all previously reported.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Influence of Two Different Salt Mixture Combinations of Na{sub 2}SO{sub 4}-NaCl-NaVO{sub 3} on Hot Corrosion Behavior of Ni-Base Superalloy Nimonic263 at 800 °C

Isothermal hot corrosion behavior of Nimonic263 alloy was studied under the influence of two different salt mixtures of 87.5 wt.% Na{sub 2}SO{sub 4} + 5 wt.% NaCl + 7.5 wt.% NaVO{sub 3} (3SM) and 74 wt.% Na{sub 2}SO{sub 4} + 21.7 wt.% NaCl + 4.3 wt.% NaVO{sub 3} (3SM-A) and also without salt mixtures up to 500 h at 800 °C. Corrosion kinetics showed that 3SM-A is more aggressive than 3SM. Multiple oxides, spinels, sulfides, vanadate compounds, and volatile compounds were observed during various hot corrosion reactions. The volatile compounds NaClO{sub 3} and CrMoO{sub 3}, and SO{sub 3} gas are attributed to the weight loss under both 3SMs. The Na{sub 2}SO{sub 4} of 3SM prevailed till 400 h, but that of 3SM-A disappeared within 5 h, as established conclusively by Raman spectra analysis. The sulfides plus internal oxide zone increased with the increased exposure duration as evident from the extensive EPMA analysis. Based on the critical analysis of corrosion kinetics and detailed microstructural characterization, fluxing and sulfidation followed by oxidation are identified as plausible hot corrosion mechanisms under both 3SMs. Besides, chlorination and high-temperature oxidation mechanisms occur under 3SM-A condition.

36 MATERIALS SCIENCE↗

Clustering of aromatic rings in near-frictionless hydrogenated amorphous carbon films probed using multiwavelength Raman spectroscopy

Multiwavelength Raman spectroscopy has been used to study the structure of hydrogenated amorphous carbon films synthesized by plasma-enhanced chemical vapor deposition. The analysis of different parameters from the Raman spectra demonstrates that the diameter, structural, and topological orders of the sp{sup 2}-bonded ring clusters increase with increasing fractions of hydrogen in the source gas. We report the existence of an unusual peak at 867 cm{sup -1} that in such extended clusters of aromatic rings, could correspond to a graphitic mode activated by a relaxation of the phonon selection-rule resulting from defects.

36 MATERIALS SCIENCE↗

Phase separation in SiGe nanocrystals embedded in SiO{sub 2} matrix during high temperature annealing

SiGe nanocrystals have been formed in SiO{sub 2} matrix by cosputtering Si, Ge, and SiO{sub 2} independently on Si substrate. Effects of the annealing time and temperature on structural and compositional properties are studied by transmission electron microscopy, x-ray diffraction (XRD), and Raman spectroscopy measurements. It is observed that Ge-rich Si{sub (1-x)}Ge{sub x} nanocrystals do not hold their compositional uniformity when annealed at high temperatures for enough long time. A segregation process leading to separation of Ge and Si atoms from each other takes place. This process has been evidenced by a double peak formation in the XRD and Raman spectra. We attributed this phase separation to the differences in atomic size, surface energy, and surface diffusion disparity between Si and Ge atoms leading to the formation of nonhomogenous structure consist of a Si-rich SiGe core covered by a Ge-rich SiGe shell. This experimental observation is consistent with the result of reported theoretical and simulation methods.

36 MATERIALS SCIENCE↗

Optical and structural properties of sputtered CdS films for thin film solar cell applications

Graphical abstract: Photo current–voltage curves (a) and the quantum efficiency (QE) (b) for the solar cell with CdS film grown at 300 °C. - Highlights: • CdS thin films were grown by a RF magnetron sputtering method. • Influence of growth temperature on the properties of CdS films was investigated. • At higher T{sub g}, the crystallinity of the films improved and the grains enlarged. • CdS/CdTe solar cells with efficiencies of 9.41% were prepared at 300 °C. - Abstract: CdS thin films were prepared by radio frequency magnetron sputtering at various temperatures. The effects of growth temperature on crystallinity, surface morphology and optical properties of the films were characterized with X-ray diffraction (XRD), field emission scanning electron microscopy (FESEM), Raman spectra, UV–visible spectrophotometry, and photoluminescence (PL) spectra. As the growth temperature was increased, the crystallinity of the sputtered CdS films was improved and the grains were enlarged. The characteristics of CdS/CdTe thin film solar cell appeared to be significantly influenced by the growth temperature of the CdS films. Thin film CdS/CdTe solar cells with efficiencies of 9.41% were prepared at a growth temperature of 300 °C.

36 MATERIALS SCIENCE↗

Magnetic property, Raman spectroscopy and crystal field analysis of Sm{sub 3+} in Sm(BrO{sub 3}){sub 3}⋅9H{sub 2}O

Single crystals of Sm(BrO{sub 3}){sub 3}⋅9H{sub 2}O (SmBR) were grown and the principal molar susceptibility perpendicular to c-axis (χ{sub ⊥}) was measured from 300 K down to 14 K and χ{sub ‖}, the parallel susceptibility, anisotropy was measured in the temperature range of 300-120 K. A cross-over between χ{sub ‖} and χ{sub ⊥} was observed at ∼ 120 K i.e., below this temperature χ{sub |||}<χ{sub ‖}. Raman spectra of SmBR were recorded in the wave number range of 10-4000 cm{sup −1} and crystal field (CF) Stark energies were extracted from the spectra. A good theoretical simulation of the observed magnetic susceptibilities and observed CF Stark energies of Sm{sup 3+} in SmBR was achieved using the one electron crystal field (CF) interaction with D{sup 3h} site symmetry. The electronic specific heat along with the quadruple splitting and hyperfine heat capacity were calculated by using the results of CF analysis.

36 MATERIALS SCIENCE↗

Sorption Behavior of Cesium Ions on Calcium Aluminosilicate Hydrate under the Condition Saturated with Saline Water - 17096

This study focused on the interaction of cesium (Cs) ions with calcium silicate hydrate (CSH) and calcium aluminosilicate hydrate (CASH) gel, of which sorption effect may retard the migration of Cs ions in the radioactive waste disposal system. In the sorption experiments, the influences of the Al/Si molar ratio of C(A)SH and the curing periods on the sorption of Cs ions into C(A)SH under the saline conditions were examined without drying processes by monitoring the concentrations of Cs, Ca, Si and Al. Besides, Raman spectroscopy were applied to the structure analysis of C(A)SH. As a result, the sorption of Cs ions on C(A)SH became larger with the increase in the Al/Si molar ratios under the all conditions. Furthermore, Raman spectra showed the formation of Al-tetrahedrons and Al-octahedrons, and the increase in the polymerization degree of silicate chain in CASH with adding Al. These results mean that the negative layer-charge of the sheets containing Si- and Al-tetrahedrons and Al-octahedron will accelerate the sorption of Cs ions of positive charge, electrostatically. (authors)

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Synthesis of bilayer MoS{sub 2} nanosheets by a facile hydrothermal method and their methyl orange adsorption capacity

Highlights: • Hexagonal phase of MoS{sub 2} nanosheets was synthesized by a facile hydrothermal method. • FE-SEM and TEM images show the sheets-like morphology of MoS{sub 2}. • Bilayer MoS{sub 2} can be grown under the optimized mole ratio of 2:1 of S:Mo at 180 °C for 50 h. • The MoS{sub 2} nanosheets possess high methyl orange adsorption capacity due to the large surface area. - Abstract: Molybdenum disulfide (MoS{sub 2}) nanosheets have received significant attention recently due to the potential applications for exciting physics and technology. Here we show that MoS{sub 2} nanosheets can be prepared by a facile hydrothermal method. The study of the properties of the MoS{sub 2} nanosheets prepared at different conditions suggests that the mole ratio of precursors and hydrothermal time significantly influences the purity, crystalline quality and thermal stability of MoS{sub 2}. X-ray diffraction, Raman spectra and transmission electron microscopy results indicate that bilayer MoS{sub 2} can be grown under an optimized mole ratio of 2:1 of S:Mo at 180 °C for 50 h. Moreover, such ultrathin nanosheets exhibit a prominent photoluminescence and possess high methyl orange adsorption capacity due to the large surface area, which can be potentially used in photodevice and photochemical catalyst.

36 MATERIALS SCIENCE↗

Stability of Hydrogen-Bonded Supramolecular Architecture under High Pressure Conditions: Pressure-Induced Amorphization in Melamine−Boric Acid Adduct

The effects of high pressure on the structural stability of the melamine-boric acid adduct (C3N6H6 2H3BO3, M 2B), a three-dimensional hydrogen-bonded supramolecular architecture, were studied by in situ synchrotron X-ray diffraction (XRD) and Raman spectroscopy. M 2B exhibited a high compressibility and a strong anisotropic compression, which can be explained by the layerlike crystal packing. Furthermore, evolution of XRD patterns and Raman spectra indicated that the M 2B crystal undergoes a reversible pressure-induced amorphization (PIA) at 18 GPa. The mechanism for the PIA was attributed to the competition between close packing and long-range order. Ab initio calculations were also performed to account for the behavior of hydrogen bonding under high pressure.

08 HYDROGEN↗

Phase transitions of cesium azide at pressures up to 30 GPa studied using in situ Raman spectroscopy

Cesium azide has been studied by Raman spectroscopy at pressures up to ≈30 GPa at room temperature. The sequence of phase transitions to Phase III (at 0.5 GPa), Phase IV (at 4.3 GPa), and Phase V (at ≈19 GPa) has been observed in agreement with recent X-ray diffraction studies. Phase III has been found to adopt a monoclinic C2/m structure with two azide anions in nonequivalent positions, where one set of azide anions appears to be orientationally disordered according to the observed Raman spectra. The transition to Phase IV has been associated with orientational ordering of azide anions, while the transition to Phase V has been shown to proceed with a lowering of crystal symmetry. Moreover, spectroscopic features indicate a possible change of bonding in CsN{sub 3} toward formation of covalent bonds at high pressures.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Soret Effect Study on High-Pressure CO 2 -Water Solutions Using UV-Raman Spectroscopy and a Concentric-Tube Optical Cell

Spatially resolved deep-UV Raman spectroscopy was applied to solutions of CO 2 and H 2 O (or D 2 O), which were subject to a temperature gradient in a thermally regulated high-pressure concentric-tube Raman cell in an attempt to measure a Soret effect in the vicinity of the critical point of CO 2 . Although Raman spectra of solutions of CO 2 dissolved in D 2 O at 10 MPa and temperatures near the critical point of CO 2 had adequate signal-to-noise and spatial resolution to observe a Soret effect with a Soret coefficient with magnitude of |S T | > 0.03, no evidence for an effect of this size was obtained for applied temperature gradients up to 19⁰C. The presence of 1 M NaCl did not make a difference. In contrast, the concentration of CO 2 dissolved in H 2 O was shown to vary significantly across the temperature gradient when excess CO 2 was present, but the results could be explained simply by the variation in CO 2 solubility over the temperature range and not to kinetic factors. For mixtures of D 2 O dissolved in scCO 2 at 10 MPa and temperatures close to the critical point of CO 2 , the Raman peaks for H 2 O were too weak to measure with confidence even at the limit of D 2 O solubility.

99 GENERAL AND MISCELLANEOUS↗

Crystal structure, Raman spectroscopy and microwave dielectric properties of xBa3MgNb2O9–(1-x)Ba2InNbO6 [x = 0.4, 0.6, 0.8]

Highlights: • xBa{sub 3}MgNb{sub 2}O{sub 9}–(1-x)Ba{sub 2}InNbO{sub 6} [x = 0.4, 0.6, 0.8] are synthesized for the first time. • Tetragonal crystal symmetry confirms from Rietveld refinement of XRD & Raman spectra. • τ{sub f} linear with octahedral-distortion. Variation of Q{sub f} with FWHM of ν{sub 1}(O) is analyzed. • Mixing of BIN with BMN improves the microwave dielectric properties of BMN. • For all the materials ε{sub r} > 36 and x = 0.4 and 0.8 materials show high Q{sub f} value than BMN. - Abstract: The dependence of the microwave dielectric properties of xBa{sub 3}MgNb{sub 2}O{sub 9}–(1-x)Ba{sub 2}InNbO{sub 6} [x = 0.4, 0.6, 0.8] on the structural parameters is investigated. The solid-state reaction technique is applied to synthesize these materials and the structural parameters are obtained from the Rietveld refinement of the X-ray diffraction (XRD) data of the samples. The Rietveld refinement confirms the tetragonal crystal structure of all the samples with space group P4/mnc (D{sub 4h}{sup 6}). It has been observed that the Raman shift of the stretching mode ν{sub 1} (BO{sub 6}) and the ionic polarizability of the cations strongly influenced the dielectric constant (ε{sub r}) whereas the value of the quality factor Q{sub f} depends upon the width of ν{sub 1} (BO{sub 6}) mode. It is observed that the temperature coefficient of resonant frequency (τ{sub f}) increases with the increase of the octahedral-distortion in the crystal structure. The factors affecting the microwave dielectric properties are discussed based on the vibrational and structural data.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Functional Mn–Mg{sub k} cation complexes in GaN featured by Raman spectroscopy

The evolution of the optical branch in the Raman spectra of (Ga,Mn)N:Mg epitaxial layers as a function of the Mn and Mg concentrations, reveals the interplay between the two dopants. We demonstrate that the various Mn-Mg-induced vibrational modes can be understood in the picture of functional Mn–Mg{sub k} complexes formed when substitutional Mn cations are bound to k substitutional Mg through nitrogen atoms, the number of ligands k being driven by the ratio between the Mg and the Mn concentrations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optical properties of large-area ultrathin MoS{sub 2} films: Evolution from a single layer to multilayers

We investigated the optical properties of ultrathin MoS{sub 2} films (number of layers: N = 1, 2, 4, and 12) using Raman spectroscopy, photoluminescence (PL) spectroscopy, and spectroscopic ellipsometry. We estimated the layer thicknesses based on Raman spectra. We characterized the microstructural properties of a single-layer MoS{sub 2} film using atomic force microscopy. We measured the lowest-energy A and B excitons using PL spectroscopy. We measured the ellipsometric angles (Ψ and Δ) of MoS{sub 2} thin films using spectroscopic ellipsometry, and obtained the dielectric functions as the films' thickness changed from a single layer to multi-layers. We determined the films' optical gap energies from the absorption coefficients. Applying the standard critical point model to the second derivative of the dielectric function (d{sup 2}ε(E)/dE{sup 2}), we determined several critical point energies. The d{sup 2}ε(E)/dE{sup 2} spectra showed doublet peaks around 3 eV corresponding to the C and D transitions, as well as doublet peaks around 2 eV corresponding to the A and B transitions. These doublet structures at 3 eV are attributed to the transitions in the Brillouin zone between the Γ and K points.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Atomate: A high-level interface to generate, execute, and analyze computational materials science workflows

We introduce atomate, an open-source Python framework for computational materials science simula-tion, analysis, and design with an emphasis on automation and extensibility. Built on top of open sourcePython packages already in use by the materials community such as pymatgen, FireWorks, and custodian,atomate provides well-tested workflow templates to compute various materials properties such as elec-tronic bandstructure, elastic properties, and piezoelectric, dielectric, and ferroelectric properties. Atomatealso enables the computational characterization of materials by providing workflows that calculate X-rayabsorption (XAS), Electron energy loss (EELS) and Raman spectra. One of the major features of atomate isthat it provides both fully functional workflows as well as reusable components that enable one to com-pose complex materials science workflows that use a diverse set of computational tools. Additionally,atomate creates output databases that organize the results from individual calculations and contains abuilder framework that creates summary reports for each computed material based on multiplesimulations.

Mathew, Kiran↗

Structural, Morphological, Raman, and Mössbauer Studies on (La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) Compounds

(La{sub 0.8}Ca{sub 0.2}){sub 1−x}Bi{sub x}FeO{sub 3} (x = 0.0, 0.1, and 0.2) compounds were prepared by the sol-gel method, using the citric acid route. Structural and microstructural characteristics of the samples were studied by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and Raman spectroscopy. Mössbauer spectroscopy was also used for magnetic characterization and structural confirmation of X-ray data. Refinement of XRD patterns indicated that the compounds crystallize in an orthorhombic structure, Pnma space group. The SEM measurements showed that the morphology of the samples is characterized by the existence of large agglomerates, while TEM confirmed the fine particle size. Raman spectra revealed that, when increasing temperature, the level of oxygen species adsorbed at the surface of the particles increases progressively. Room temperature Mössbauer spectroscopy data revealed the existence of two octahedral magnetic sites in the structure of the compounds, which is compatible with XRD data, and a small percentage of a paramagnetic phase in the samples, which increases with Bi-content.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong magnetoelectric and spin phonon coupling in SmFeO{sub 3}/PMN-PT composite

We have investigated spin phonon coupling in the strain coupled magnetoelectric SmFeO{sub 3}/0.65Pb(Mg{sub 1/3}Nb{sub 2/3})O{sub 3}–0.35PbTiO{sub 3} (PMN-PT) composite in the temperature range of 300–650 K by Raman spectroscopy and magnetic measurements. The SmFeO{sub 3}/PMN-PT composite shows sharp rise in magnetic moment across ferroelectric transition temperature (T{sub c}) of PMN-PT. Around this transition temperature (T{sub c} of PMN-PT), the temperature evolution of Raman spectra of the composite also shows anomalies in the phonon frequencies and line width corresponding to the SmFeO{sub 3} phase which indicate structural modifications in the SmFeO{sub 3} phase around T{sub c} of PMN-PT. The observed structural, magnetic, and phonon anomalies of SmFeO{sub 3} around T{sub c} of PMN-PT in SmFeO{sub 3}/PMN-PT are attributed to spin-phonon coupling providing evidence of strong strain mediated magnetoelectric effects.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗