Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Quantum light”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Quantum Monte Carlo calculations of electromagnetic transitions in light nuclei

Recently, we presented ab initio quantum Monte Carlo calculations of magnetic moments and M1 transitions in A <= 10 nuclei, which include two-body meson-exchange currents' contributions of one- and two-pion range, derived from chiral effective field. These corrections are found to always improve the theoretical predictions, leading to a very good agreement with the experimental data. Here, we report on a study, carried out within the same framework, of M1 transitions in low-lying states of 8Be. We also present a number of E2 transition calculations, evaluated in impulse approximation, with emphasis on transitions involving the 8Be resonant excited states at ~ 3 MeV and ~ 11 MeV.

Pastore, Saori↗

Investigating the origin of efficiency droop by profiling the temperature across the multi-quantum well of an operating light-emitting diode

Performance degradation resulting from efficiency droop during high-power operation is a critical problem in the development of high-efficiency light-emitting diodes (LEDs). In order to resolve the efficiency droop and increase the external quantum efficiency of LEDs, the droop's origin should be identified first. To experimentally investigate the cause of efficiency droop, we used null-point scanning thermal microscopy to quantitatively profile the temperature distribution on the cross section of the epi-layers of an operating GaN-based vertical LED with nanoscale spatial resolution at four different current densities. The movement of temperature peak towards the p-GaN side as the current density increases suggests that more heat is generated by leakage current than by Auger recombination. We therefore suspect that at higher current densities, current leakage becomes the dominant cause of the droop problem.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Controlling the dopant profile for SRH suppression at low current densities in λ ≈ 1330 nm GaInAsP light-emitting diodes

The quantum efficiency of double hetero-junction light-emitting diodes (LEDs) can be significantly enhanced at low current density by tailoring the spatial profile of dopants to suppress Shockley–Read–Hall recombination. To demonstrate this effect, we model, design, grow, fabricate, and test a GaInAsP LED (λ≈ 1330 nm) with an unconventional dopant profile. Compared against that of our control design, which is a conventional n + -n - p + double hetero-junction LED, the dopant profile near the n - p + hetero-structure of the design displaces the built-in electric field in such a way that the J 02 space charge recombination current is suppressed. The design principle generalizes to other material systems and could be applicable to efforts to observe and exploit electro-luminescent refrigeration at practical power densities.

42 ENGINEERING↗

Low energy electron beam irradiation effect on optical properties of nanopillar MQW InGaN/GaN structures

The low energy electron beam irradiation (LEEBI) effect on optical properties of planar and nanopillar InGaN/GaN muliple quantum well light emitting structures was studied by the cathodoluminescence (CL) method. On the planar structures LEEBI leads to a formation of new InGaN-related emission bands red shifted in comparison with initial one at small irradiation doses and blue shifted at doses higher than 0.5 C/cm{sup 2}. It was observed that after dry etching used for the nanopillar formation the main InGaN-related emission line moves from 2.92 to 2.98 eV that can be explained by a strain relaxation in the quantum wells. The optical properties of nanopilars start to change under LEEBI at a dose of about one order of magnitude lower than that for planar structures. At high irradiation doses the behavior of both structures under LEEBI is similar. The results obtained were explained by the formation and reconstruction of quantum dots inside the quantum wells due to a point defect generation and redistribution stimulated by the electron beam irradiation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Overshoot effects of electron on efficiency droop in InGaN/GaN MQW light-emitting diodes

To evaluate electron leakage in InGaN/GaN multiple quantum well (MQW) light emitting diodes (LEDs), analytic models of ballistic and quasi-ballistic transport are developed. With this model, the impact of critical variables effecting electron leakage, including the electron blocking layer (EBL), structure of multiple quantum wells (MQWs), polarization field, and temperature are explored. The simulated results based on this model shed light on previously reported experimental observations and provide basic criteria for suppressing electron leakage, advancing the design of InGaN/GaN LEDs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Control of the spontaneous emission from a single quantum dash using a slow-light mode in a two-dimensional photonic crystal on a Bragg reflector

We demonstrate the coupling of a single InAs/InP quantum, emitting around 1.55 {mu}m, to a slow-light mode in a two-dimensional photonic crystal on Bragg reflector. These surface addressable 2.5D photonic crystal band-edge modes present the advantages of a vertical emission and the mode area and localization may be controlled, leading to a less critical spatial alignment with the emitter. An increase in the spontaneous emission rate by a factor of 1.5-2 is measured at low temperature and is compared to the Purcell factor predicted by three-dimensional time-domain electromagnetic simulations.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Spin orientation of electrons by unpolarized light pulses in low-symmetry quantum wells

The spin dynamics of electrons in low-symmetry quantum wells (QWs) under conditions of interband excitation by ultrashort unpolarized light pulses is investigated. It is shown that after the transmission, spin polarization appears in the system after a time comparable with the electron momentum relaxation time for an electron pulse and then vanishes. The microscopic theory of spin orientation of electrons by optical pulses carrying zero angular momentum is developed for asymmetric QWs grown from semiconductors with the zinc blende lattice along the [110] crystallographic direction. Pumping with unpolarized light in such structures in the normal incidence geometry induces a spin in the QW plane along the [1 1-bar 0] axis.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Photon correlations in two-dimensional waveguide arrays and their classical estimate

Interference effects of photon pairs propagating through two-dimensional lattices of evanescently coupled waveguides are theoretically analyzed for input states of independent and path-entangled photons. Their correlation unveils characteristic Hong-Ou-Mandel interferences as well as more complex phenomena unique to these structures. Furthermore, purely classical states of light are used to simulate these quantum interferences in intensity correlation experiments. The results suggest that waveguide arrays can be employed as convenient devices for manipulating quantum states of light.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Photonic integration of Er 3+ :Y 2 SiO 5 with thin-film lithium niobate by flip chip bonding

Rare earth ions are known as promising candidates for building quantum light-matter interface. However, tunable photonic cavity access to rare earth ions in their desired host crystal remains challenging. Here, we demonstrate the integration of erbium doped yttrium orthosilicate (Er 3+ :Y 2 SiO 5 ) with thin-film lithium niobate photonic circuit by plasma-activated direct flip chip bonding. Resonant coupling to erbium ions is realized by on-chip electro-optically tuned high Q lithium niobate micro-ring resonators. Fluorescence and absorption of erbium ions at 1536.48 nm are measured in the waveguides, while the collective ion-cavity cooperativity with micro-ring resonators is assessed to be 0.36. This work presents a versatile scheme for future rare earth ion integrated quantum devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Low-loss millimeter-wave resonators with an improved coupling structure

Millimeter-wave superconducting resonators are a useful tool for studying quantum device coherence in a new frequency domain. However, improving resonators is difficult without a robust and reliable method for coupling millimeter-wave signals to 2D structures. We develop and characterize a tapered transition structure coupling a rectangular waveguide to a planar slotline waveguide with better than 0.5 dB efficiency over 14 GHz, and use it to measure ground-shielded resonators in the W band (75–110 GHz). Having decoupled the resonators from radiative losses, we consistently achieve single-photon quality factors above 10 5 , with a two-level-system loss limit above 10 6 , and verify the effectiveness of oxide removal treatments to reduce loss. These values are 4–5 times higher than those previously reported in the W band, and much closer to typical planar microwave resonators. The improved losses demonstrated by these on-chip millimeter-wave devices shed new light on quantum decoherence in a different frequency regime, offer increased selectivity for high-frequency detectors, and enables new possibilities for hybrid quantum experiments integrating millimeter-wave frequencies.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Environmentally Robust Quantum Dot Down Converters for Highly Efficient Solid State Lighting

This project contributes fundamental understanding of the chemical synthesis of cadmium free quantum dots (QDs) designed for solid state lighting (SSL). Methods to incorporate gallium into quantum dot architectures were explored, which led to more stable and brighter solid state lighting devices. These findings will help advance the incorporation of quantum dots in highly energy efficient lighting devices with a warm color spectrum. Such Cd-free lighting devices can greatly accelerate the adoption of high efficiency, warm spectrum lighting in buildings. The project targeted InP/GaP/ZnS colloidal quantum dots that more effectively absorb the blue light produced by light emitting diode packages and emit monochromatic red light with near perfect efficiency. While significant improvements in the QD absorptivity were demonstrated, the absorbance increase achieved was 3x rather than the targeted 10x increase. Similarly, the luminescence from these QDs achieved about half of the target photoluminescence quantum yield (PLQY) and twice the desired spectral width, a measure of the color purity of their luminescence. While the target characteristics and some of the year 2/2 milestones were not met, the new QD architectures did lead to greater stability on SSL packages, a sign of the long term promise of the technology.

36 MATERIALS SCIENCE↗

Controlling potential barrier height by changing V-shaped pit size and the effect on optical and electrical properties for InGaN/GaN based light-emitting diodes

The internal quantum efficiency (IQE) of InGaN/GaN multiple quantum wells (MQWs) with blue light emission was improved by inserting an InGaN/GaN superlattice (SL) beneath the MQWs. While the SL technique is useful for improving the light-emitting diode (LED) performance, its effectiveness from a multilateral point of view requires investigation. V-shaped pits (V-pits), which generate a potential barrier and screen the effect of the threading dislocation, are one of the candidates for increasing the light emission efficiency of LEDs exceptionally. In this research, we investigated the relationship between the V-pit and SL and revealed that the V-pit diameter is strongly correlated with the IQE by changing the number of SL periods. Using scanning near-field optical microscopy and photoluminescence measurements, we demonstrated the distinct presence of the potential barrier formed by the V-pits around the dislocations. The relationship between the V-pit and the number of SL periods resulted in changing the potential barrier height, which is related to the V-pit diameter determined by the number of SL periods. In addition, we made an attempt to insert pit expansion layers (PELs) composed of combination of SL and middle temperature grown GaN layer instead of only SL structure. As a result of the evaluation of LEDs using SL or PEL, the EL intensity was strongly related to pit diameter regardless of the structures to form the V-pits. In addition, it was clear that larger V-pits reduce the efficiency droop, which is considered to be suppression of the carrier loss at high injection current.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Engineering Auger recombination in colloidal quantum dots via dielectric screening

Auger recombination is the main non-radiative decay pathway for multi-carrier states of colloidal quantum dots, which affects performance of most of their optical and optoelectronic applications. Outstanding single-exciton properties of CdSe/CdS core/shell quantum dots enable us to simultaneously study the two basic types of Auger recombination channels-negative trion and positive trion channels. Though Auger rates of positive trion are regarded to be much faster than that of negative trion for II-VI quantum dots in literature, our experiments find the two rates can be inverted for certain core/shell geometries. This is confirmed by theoretical calculations as a result of geometry-dependent dielectric screening. By varying the core/shell geometry, both types of Auger rates can be independently tuned for ~1 order of magnitude. Experimental and theoretical findings shed new light on designing quantum dots with necessary Auger recombination characteristics for high-power light-emitting-diodes, lasers, single-molecular tracking, super-resolution microscope, and advanced quantum light sources.

36 MATERIALS SCIENCE↗

Cu−In−Ga−S quantum dot composition-dependent device performance of electrically driven light-emitting diodes

Colloidal synthesis of ternary and quaternary quantum dots (QDs) of In/Ga ratio-varied Cu−In{sub 1−x}−Ga{sub x}−S (CIGS) with nominal x = 0, 0.5, 0.7, and 1 and their application for the fabrication of quantum dot-light-emitting diodes (QLEDs) are reported. Four QLEDs having CIGS QDs with different compositions are all solution-processed in the framework of multilayered structure, where QD emitting layer is sandwiched by hybrid charge transport layers of poly(9-vinlycarbazole) and ZnO nanoparticles. The device performance such as luminance and efficiency is found to be strongly dependent on the composition of CIGS QDs, and well interpreted by the device energy level diagram proposed through the determination of QD valence band minima by photoelectron emission spectroscopic measurement.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Wavelength-Selective Reactivity of Iron(III) Halide Salts in Photocatalytic C–H Functionalization

The utility of halogen radicals in hydrocarbon functionalization extends from early examples of photochemical halogenation to recent reports using photoredox catalysis with iridium complexes and simple transition metal salts such as FeCl 3 . The majority of these methods (uncatalyzed and iron-catalyzed) require UV light (λ ≤ 390 nm), and systematic efforts to enable the use of visible light remain valuable. We report the use of a simple Fe(III) salt that enables a C–H to C–C and C–N functionalization under visible light. The reactivity and selectivity profile using different light sources demonstrates wavelength-selective behavior, which was further investigated with deuterium kinetic isotope effect experiments and DFT calculations. These results show that control over the reactive intermediates in this iron-catalyzed reaction can be achieved through proper choice of the wavelength of irradiation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A Light Sail Inspired Model to Harness Casimir Forces for Propellantless Propulsion

The model used to calculate Casimir forces for variously shaped conducting plates in this paper assumes the vacuum energy pervades all space and that photons randomly pop into and out of existence. While they exist, they possess energy and momentum that can be transferred by reflection as in a light sail. Quantum mechanics in the model is entirely bound up in the Casimir equation of force per unit area. This model is compared with two different experiments: that of Chen and Mohideen demonstrating lateral Casimir forces for sinusoidally corrugated spherical and flat plates and Lamoreaux demonstrating normal Casimir forces between a conducting sphere and flat plate. The calculated forces using this model were compared to the forces obtained in these experiments as well as with calculations using the proximity force approximation. In both cases the results (when compared to the actual plates measured and calculated using non-corrected equations) were less than a few parts per thousand different for the range of separation distances used. When the model was used to calculate forces on the opposite plates, different force magnitudes were obtained seemingly indicating prospects for propellentless propulsion but requiring skeptical verification.

42 ENGINEERING↗

Cross-plane thermal conductivity of a PbSnSe/PbSe superlattice material

The cross-plane thermal conductivity of a PbSnSe/PbSe multi-period superlattice (SL) grown by molecular beam epitaxy is obtained from continuous wave photoluminescence (PL) measurements and finite element analysis (FEA). PL measurement and FEA for a structure consisting of a multiple quantum well light emitting layer on top of a PbSnSe/PbSe SL with three different periodicities of 2.4, 3.6, and 4.8 nm revealed a cross-plane lattice thermal conductivity of 0.8 W/mK. The 58% reduction relative to the 1.9 W/mK value for bulk PbSe is attributed to enhanced scattering and/or reflection of acoustic phonons within the short-period SL material. (C) 2011 American Institute of Physics. [doi:10.1063/1.3615797]

Jeffers, JD↗