Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “QUALITY FACTOR”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

WASP-19b: THE SHORTEST PERIOD TRANSITING EXOPLANET YET DISCOVERED

We report on the discovery of a new extremely short period transiting extrasolar planet, WASP-19b. The planet has mass M{sub pl} = 1.15 +- 0.08 M{sub J} , radius R{sub pl} = 1.31 +- 0.06 R{sub J} , and orbital period P = 0.7888399 +- 0.0000008 days. Through spectroscopic analysis, we determine the host star to be a slightly super-solar metallicity ([M/H] = 0.1 +- 0.1 dex) G-dwarf with T{sub eff} = 5500 +- 100 K. In addition, we detect periodic, sinusoidal flux variations in the light curve which are used to derive a rotation period for the star of P{sub rot} = 10.5 +- 0.2 days. The relatively short stellar rotation period suggests that either WASP-19 is somewhat young (approx 600 Myr old) or tidal interactions between the two bodies have caused the planet to spiral inward over its lifetime resulting in the spin-up of the star. Due to the detection of the rotation period, this system has the potential to place strong constraints on the stellar tidal quality factor, Q'{sub s}, if a more precise age is determined.

79 ASTRONOMY AND ASTROPHYSICS↗

Microstructure factor and mechanical and electronic properties of hydrogenated amorphous and nanocrystalline silicon thin-films for microelectromechanical systems applications

Thin-film silicon allows the fabrication of MEMS devices at low processing temperatures, compatible with monolithic integration in advanced electronic circuits, on large-area, low-cost, and flexible substrates. The most relevant thin-film properties for applications as MEMS structural layers are the deposition rate, electrical conductivity, and mechanical stress. In this work, n{sup +}-type doped hydrogenated amorphous and nanocrystalline silicon thin-films were deposited by RF-PECVD, and the influence of the hydrogen dilution in the reactive mixture, the RF-power coupled to the plasma, the substrate temperature, and the deposition pressure on the structural, electrical, and mechanical properties of the films was studied. Three different types of silicon films were identified, corresponding to three internal structures: (i) porous amorphous silicon, deposited at high rates and presenting tensile mechanical stress and low electrical conductivity, (ii) dense amorphous silicon, deposited at intermediate rates and presenting compressive mechanical stress and higher values of electrical conductivity, and (iii) nanocrystalline silicon, deposited at very low rates and presenting the highest compressive mechanical stress and electrical conductivity. These results show the combinations of electromechanical material properties available in silicon thin-films and thus allow the optimized selection of a thin silicon film for a given MEMS application. Four representative silicon thin-films were chosen to be used as structural material of electrostatically actuated MEMS microresonators fabricated by surface micromachining. The effect of the mechanical stress of the structural layer was observed to have a great impact on the device resonance frequency, quality factor, and actuation force.

36 MATERIALS SCIENCE↗

Starting current of coaxial relative backward wave oscillator

This paper is devoted to study the starting current of the coaxial relativistic backward wave oscillator (CRBWO) using a simple physical model that employs the eigenmodes of the enclosed resonant cavity and the external quality factor of the open cavity Q. The agreement between the theoretical and simulation results is presented. It is found that CRBWO is suffering from the mode competition during the startup of the oscillation due to the wide interaction region over the range of the longitudinal wavenumbers.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Design of a terahertz parametric oscillator based on a resonant cavity in a terahertz waveguide

We demonstrate ns-pulsed pumping of terahertz (THz) parametric oscillations in a quasi-triply resonant cavity in a THz waveguide. The THz waves, down converted through parametric interactions between the pump and signal waves at telecom frequencies, are confined to a GaP single mode ridge waveguide. By combining the THz waveguide with a quasi-triply resonant cavity, the nonlinear interactions can be enhanced. A low threshold pump intensity for parametric oscillations can be achieved in the cavity waveguide. The THz output power can be maximized by optimizing the quality factors of the cavity so that an optical to THz photon conversion efficiency, η{sub p}, of 0.35, which is near the quantum-limit level, can be attained. The proposed THz optical parametric oscillator can be utilized as an efficient and monochromatic THz source.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Diamond electro-optomechanical resonators integrated in nanophotonic circuits

Diamond integrated photonic devices are promising candidates for emerging applications in nanophotonics and quantum optics. Here, we demonstrate active modulation of diamond nanophotonic circuits by exploiting mechanical degrees of freedom in free-standing diamond electro-optomechanical resonators. We obtain high quality factors up to 9600, allowing us to read out the driven nanomechanical response with integrated optical interferometers with high sensitivity. We are able to excite higher order mechanical modes up to 115 MHz and observe the nanomechanical response also under ambient conditions.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Multiwall carbon nanotube microcavity arrays

Periodic highly dense multi-wall carbon nanotube (MWCNT) arrays can act as photonic materials exhibiting band gaps in the visible regime and beyond terahertz range. MWCNT arrays in square arrangement for nanoscale lattice constants can be configured as a microcavity with predictable resonance frequencies. Here, computational analyses of compact square microcavities (≈0.8 × 0.8 μm{sup 2}) in MWCNT arrays were demonstrated to obtain enhanced quality factors (≈170–180) and narrow-band resonance peaks. Cavity resonances were rationally designed and optimized (nanotube geometry and cavity size) with finite element method. Series (1 × 2 and 1 × 3) and parallel (2 × 1 and 3 × 1) combinations of microcavities were modeled and resonance modes were analyzed. Higher order MWCNT microcavities showed enhanced resonance modes, which were red shifted with increasing Q-factors. Parallel microcavity geometries were also optimized to obtain narrow-band tunable filtering in low-loss communication windows (810, 1336, and 1558 nm). Compact series and parallel MWCNT microcavity arrays may have applications in optical filters and miniaturized optical communication devices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Overall performance evaluation using an equivalent circuit model for radio-frequency single-electron transistors

Charge sensitivities of a radio-frequency single-electron transistor (RF-SET) by using amplitude (AD) and phase-shift detection (PSD) of the reflected RF signals were experimentally studied. It was found that AD is most sensitive at the resonant frequency while PSD is most sensitive at a frequency slightly off the resonance. The best PSD sensitivity is better than the best AD one when the quality factor of a tank circuit is higher than 10; the higher Q-value is, the superior PSD. The maximal change in reflection amplitude and phase-shift were found proportional to the SET conductance change. The above experimental findings were confirmed by the calculation based on an equivalent circuit model.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Galvanically split superconducting microwave resonators for introducing internal voltage bias

We present the design and performance of high-Q superconducting niobium nitride microwave resonators intended for use in hybrid quantum systems, coupling spin degrees of freedom to the cavity mode, both magnetically and electrically. We demonstrate a solution that allows to introduce static electric fields in the resonator without compromising the microwave performance. Quality factors above 10{sup 5} remain unchanged in strong applied static electric fields above 10 MV/m and magnetic fields up to ∼400 mT. By design, the configuration of the dc field matches that of the microwave field, especially advantageous for experiments on electrostatically controlled spin systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Scanning thermal microscopy based on a quartz tuning fork and a micro-thermocouple in active mode (2ω method)

A novel probe for scanning thermal microscope using a micro-thermocouple probe placed on a Quartz Tuning Fork (QTF) is presented. Instead of using an external deflection with a cantilever beam for contact detection, an original combination of piezoelectric resonator and thermal probe is employed. Due to a non-contact photothermal excitation principle, the high quality factor of the QTF allows the probe-to-surface contact detection. Topographic and thermal scanning images obtained on a specific sample points out the interest of our system as an alternative to cantilevered resistive probe systems which are the most spread.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Research of 100 MHz ultra-low-jitter clock generating circuit

Jitter which quantifies the quality of a clock is an important specification. It is of great significance for an electronic system. To obtain a good signal-to-noise ratio for sampling systems, there must be clocks with low jitter performances. By using the relationship between jitter and phase noise, the 100 MHz clock generating circuit with ultra-low jitter and phase noise characteristics are studied in this paper. Bipolar junction transistor with low noise figure and low corner frequency should be selected. Inductance and capacitance in the feedback circuit are obviously the main contributions to the jitter. Impacts of the loaded quality factor (Q{sub L}) of the circuit on the jitter are analyzed, and the explicit expression for the jitter based on circuit components is derived as well. The simulation and experiment results are proved to show that the jitter and phase noise characteristics can be improved by increasing Q{sub L} of the circuit.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Characterizing the complex permittivity of high-κ dielectrics using enhanced field method

This paper proposed a method to characterize the complex permittivities of samples based on the enhancement of the electric field strength. The enhanced field method significantly improves the measuring range and accuracy of the samples’ electrical properties. Full-wave simulations reveal that the resonant frequency is closely related to the dielectric constant of the sample. In addition, the loss tangent can be determined from the measured quality factor and the just obtained dielectric constant. Materials with low dielectric constant and very low loss tangent are measured for benchmarking and the measured results agree well with previous understanding. Interestingly, materials with extremely high dielectric constants (ε{sub r} > 50), such as titanium dioxide, calcium titanate, and strontium titanate, differ greatly as expected.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

High aspect ratio iridescent three-dimensional metal–insulator–metal capacitors using atomic layer deposition

The authors report on the structural and electrical properties of TiN/Al{sub 2}O{sub 3}/TiN metal–insulator–metal (MIM) capacitor structures in submicron three-dimensional (3D) trench geometries with an aspect ratio of ∼30. A simplified process route was employed where the three layers for the MIM stack were deposited using atomic layer deposition (ALD) in a single run at a process temperature of 250 °C. The TiN top and bottom electrodes were deposited via plasma-enhanced ALD using a tetrakis(dimethylamino)titanium precursor. 3D trench devices yielded capacitance densities of 36 fF/μm{sup 2} and quality factors >65 at low frequency (200 Hz), with low leakage current densities (<3 nA/cm{sup 2} at 1 V). These devices also show strong optical iridescence which, when combined with the covert embedded capacitance, show potential for system in package (SiP) anticounterfeiting applications.

36 MATERIALS SCIENCE↗

Conversion of a TEM10 beam into two nearly Gaussian beams

To achieve high output power and/or high efficiencies, laser systems are often designed to operate with either high-order or multiorder transverse modes. This comes at the expense of beam quality. Herein, a technique for converting the two lobes of a higher-order (Hermite–Gaussian TEM10) beam into two TEM00 beams is discussed. It is shown that nearly 94% of the power in a single lobe of the TEM10 beam spatially overlaps an appropriately chosen TEM00 beam. Beam quality (defined by the M2 beam quality factor) is increased by separating the two TEM10 lobes with an edge aperture. A single-mode optical fiber can be used as a spatial filter to eliminate residual higher-order mode content. This study suggests that more than 90% of the power in a TEM10 beam can be converted into two separate TEM00 beams.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Commissioning results of Nb 3 Sn cavity vapor diffusion deposition system at JLab

Nb 3 Sn as a BCS superconductor with a superconducting critical temperature higher than that of niobium offers potential benefit for SRF cavities via a lower-than-niobium surface resistance at the same temperature and frequency. A Nb 3 Sn vapor diffusion deposition system designed for coating of 1.5 and 1.3 GHz single-cell cavities was built and commissioned at JLab. As the part of the commissioning, RF performance at 2.0 K of a single-cell 1.5 GHz CEBAF-shaped cavity was measured before and after coating in the system. Before Nb 3 Sn coating the cavity had a Q 0 of about 10 10 and was limited by the high field Q-slope at E acc ≅ 27 MV/m. Coated cavity exhibited the superconducting transition at about 17.9 K. The low-field quality factor was about 5∙10 9 at 4.3 K and 7∙10 9 at 2.0 K decreasing with field to about 1∙10 9 at E acc ≅ 8 MV/m at both temperatures. The highest field was limited by the available RF power.

36 MATERIALS SCIENCE↗

Influence of Sm2O3 addition on Judd-Ofelt parameters, thermal and optical properties of the TeO2-Li2O-ZnO-Nb2O5 glass system

Highlights: • Synthesis of Sm{sub 2}O{sub 3} doped TeO{sub 2}-Li{sub 2}O-ZnO-Nb{sub 2}O{sub 5} glass to be used in optical devices. • Area under the peak calculations of FTIR and Raman display higher presence of BOs. • DSC plots indicate high stability and high rigidity of prepared glass samples. • Judd-Ofelt analysis shows the ionic nature of Sm{sup 3+} ions with neighboring atoms. • Higher branching ratio values obtained from {sup 6}H{sub 5/2} → {sup 6}F{sub 5/2} emission transition. - Abstract: A series of transparent and light yellow color samples composed of Sm{sub 2}O{sub 3} doped tellurium oxide glasses with chemical composition 75TeO{sub 2}-5Li{sub 2}O-10ZnO-(10-X) Nb{sub 2}O{sub 5}-XSm{sub 2}O{sub 3} was prepared by conventional melt-quenching technique. Rare earth (Sm{sub 2}O{sub 3}) was added to improve all glass properties. From obtained radiative properties, the samples which prepared with above composition can be considered as a prospect application for laser design due to higher branching ratio. The physical properties including sample density, molar volume, and OPD were measured. The glassy nature is approved by XRD analysis. The structural modification of glass forming units with introducing Sm{sub 2}O{sub 3} was studied by FTIR and Raman spectra. The intensity ratio of TeO{sub 4}/TeO{sub 3} was measured to determine the ratio of bridging/non-bridging oxygen exists in glass network. Glass thermal stability, glass transition temperature, and melting temperature were obtained from DSC plots. The UV–vis-NIR absorption spectra display 9 peaks. Optical parameters including optical band gap E{sub Opt}, Urbach energy ΔE and refractive index n were determined. From absorption spectra, Judd-Ofelt intensity parameters (Ω{sub λ} and λ = 2, 4, 6) have been derived to study bonding nature. A spectroscopic quality factor was calculated. Branching ratio (β{sub r}) and lifetime (τ) have been calculated using JO parameters. Absorption and emission cross-sections were determined to measure the probability of an absorption or emission process. Finally, we propose that these prepared samples can be used in optical devices and other applications.

36 MATERIALS SCIENCE↗

1.9 W continuous-wave single transverse mode emission from 1060 nm edge-emitting lasers with vertically extended lasing area

High-brightness edge-emitting semiconductor lasers having a vertically extended waveguide structure emitting in the 1060 nm range are investigated. Ridge waveguide (RW) lasers with 9 μm stripe width and 2.64 mm cavity length yield highest to date single transverse mode output power for RW lasers in the 1060 nm range. The lasers provide 1.9 W single transverse mode optical power under continuous-wave (cw) operation with narrow beam divergences of 9° in lateral and 14° (full width at half maximum) in vertical direction. The beam quality factor M{sup 2} is less than 1.9 up to 1.9 W optical power. A maximum brightness of 72 MWcm{sup −2}sr{sup −1} is obtained. 100 μm wide and 3 mm long unpassivated broad area lasers provide more than 9 W optical power in cw operation.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Mathematical simulation of an experimental prototype of a high-speed nonreturn-to-zero differential phase-shift-keying fibre-optic communication system

The influence of chromatic dispersion, optical power, and nonlinear distortions in a fibre-optic communication system on the quality of data transmission based on nonreturn-to-zero differential phase-shift keying at a rate of 40 Gbit s{sup -1} in one spectral channel have been numerically simulated and experimental studied. The results of direct numerical calculations and estimates based on the quality factor (Q factor) are in qualitative agreement with the experimental data. It is found experimentally that the dependence of the error rate on the accumulated dispersion has a plateau in the range from -50 to 50 ps nm{sup -1}; a similar dependence is obtained in the numerical calculation based on the Q factor. The optimal calculated value of the power launched into each of 10 sections of a line with a total length of 1000 km is 2 - 4 dBm; it corresponds to the experimental value of 3 dBm.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Nanoscale constrictions in superconducting coplanar waveguide resonators

We report on the design, fabrication, and characterization of superconducting coplanar waveguide resonators with nanoscopic constrictions. By reducing the size of the center line down to 50 nm, the radio frequency currents are concentrated and the magnetic field in its vicinity is increased. The device characteristics are only slightly modified by the constrictions, with changes in resonance frequency lower than 1% and internal quality factors of the same order of magnitude as the original ones. These devices could enable the achievement of higher couplings to small magnetic samples or even to single molecular spins and have applications in circuit quantum electrodynamics, quantum computing, and electron paramagnetic resonance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗