Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Properties”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Thermodynamic and Transport Property Correlation Formulas for Equilibrium Air from 1,000 Degrees Kelvin to 15,000 Degrees Kelvin

The thermodynamic properties, density and temperature, as well as transport property parameters involving viscosity, Prandtl number (including diffusion effects), and gaseous radiation absorption coefficients have been correlated as a function of enthalpy at four pressure levels (10 (sup -1), 10 (sup 0), 10, and 10 (sup 2) atmospheres). The correlation formulas are written in a generalized form for which coefficients for a particular property and pressure level are tabulated. The correlation formulas are useful in digital computer programs for non-adiabatic viscous flow problems.

AIR↗

Study of the physical properties of petrolatum-stabilized magnesium-hydrocarbon slurry fuels

Magnesium-hydrocarbon slurries containing a moderate proportion of petrolatum have physical properties such that they offer promise as experimental aircraft fuels. The settling of the magnesium is greatly retarded by the petrolatum, and the slurries can easily be remixed to their original condition after storage. Successive batches which have closely similar properties can be prepared readily. The apparent viscosity of these slurries increased rapidly with increasing magnesium concentration, with increasing petrolatum concentration, and with decreasing temperature. As the apparent viscosity increased, the extent of settling and the ease of remixing both decreased. Although no quantitative correlation was found between the properties of the slurry and those of the petrolatum, and no one petrolatum gave slurries which were best in all respects, one of the five petrolatum used was judged to be superior to the others.

FUELS - PROPERTIES, PHYSICAL AND CHEMICAL↗

Retrieval of Aerosol Optical Properties under Thin Cirrus from MODIS

Retrieval of aerosol optical properties using shortwave bands from passive satellite sensors, such as MODIS, is typically limited to cloud-free areas. However, if the clouds are thin enough (i.e. thin cirrus) such that the satellite-observed reflectance contains signals under the cirrus layer, and if the optical properties of this cirrus layer are known, the TOA reflectance can be corrected for the cirrus layer to be used for retrieving aerosol optical properties. To this end, we first correct the TOA reflectances in the aerosol bands (0.47, 0.55, 0.65, 0.86, 1.24, 1.63, and 2.12 micron for ocean algorithm and 0.412, 0.47, and 0.65 micron for deep blue algorithm) for the effects of thin cirrus using 1.38 micron reflectance and conversion factors that convert cirrus reflectance in 1.38 micron band to those in aerosol bands. It was found that the conversion factors can be calculated by using relationships between reflectances in 1.38 micron band and minimum reflectances in the aerosol bands (Gao et al., 2002). Refer to the example in the figure. Then, the cirrus-corrected reflectance can be calculated by subtracting the cirrus reflectance from the TOA reflectance in the optically thin case. A sensitivity study suggested that cloudy-sky TOA reflectances can be calculated with small errors in the form of simple linear addition of cirrus-only reflectances and clear-sky reflectances. In this study, we correct the cirrus signals up to TOA reflectance at 1.38 micron of 0.05 where the simple linear addition is valid without extensive radiative transfer simulations. When each scene passes the set of tests shown in the flowchart, the scene is corrected for cirrus contamination and passed into aerosol retrieval algorithms.

MODIS↗

Finite Element Estimation of Meteorite Structural Properties

The goal of the project titled Asteroid Threat Assessment at NASA Ames Research Center is to develop risk assessment tools. The expertise in atmospheric entry in the Entry Systems and Technology Division is being used to describe the complex physics of meteor breakup in the atmosphere. The breakup of a meteor is dependent on its structural properties, including homogeneity of the material. The present work describes an 11-week effort in which a literature survey was carried for structural properties of meteoritic material. In addition, the effect of scale on homogeneity isotropy was studied using a Monte Carlo approach in Nastran. The properties were then in a static structural response simulation of an irregularly-shape meteor (138-scale version of Asteroid Itokawa). Finally, an early plan was developed for doctoral research work at Georgia Tech. in the structural failure fragmentation of meteors.

Structural Properties↗

ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics-Three Decades of High-Quality, Technically-Rigorous Normalization

Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high-quality, technically-rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards contain testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards are used to generate accurate, reliable, repeatable and complete data. Within Committee C28, users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, 50 standards since the Committee's founding in 1986. This paper provides a detailed retrospective of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of standards for advanced ceramics to demonstrate their practical applications.

properties↗

Aerosol Optical Properties at the Lulin Atmospheric Background Station in Taiwan and the Influences of Long-Range Transport of Air Pollutants

The Lulin Atmospheric Background Station (LABS, 23.47 deg. N 120.87 deg. E, 2862 m ASL) in Central Taiwan was constructed in 2006 and is the only high-altitude background station in the western Pacific region for studying the influence of continental outflow. In this study, extensive optical properties of aerosols, including the aerosol light scattering coefficient [Sigma(sub s)] and light absorption coefficient [Sigma(sub a)], were collected from 2013 to 2014. The intensive optical properties, including mass scattering efficiency [Sigma(sub s)], mass absorption efficiency [Sigma(sub a)] single scattering albedo (Omega), scattering Angstrom exponent (A), and backscattering fraction (b), were determined and investigated, and the distinct seasonal cycle was observed. The value of [Alpha(sub a)] began to increase in January and reached a maximum in April; the mean in spring was 5.89 m(exp. 2) g(exp. -1) with a standard deviation (SD) of 4.54 m(exp. 2) g(exp. -1) and a 4.48 m(exp. 2) g(exp. -1) interquartile range (IQR: 2.95-7.43 m(exp. 2) g(exp. -1). The trend was similar in [Sigma(sub a)], with a maximum in March and a monthly mean of 0.84 m(exp. 2) g(exp. -1). The peak values of Omega (Mean = 0.92, SD = 0.03, IQR: 0.90 - 0.93) and A (Mean = 2.22, SD = 0.61, IQR: 2.12 = 2.47) occurred in autumn. These annual patterns of optical properties were associated with different long-range transport patterns of air pollutants such as biomass burning (BB) aerosol in spring and potential anthropogenic emissions in autumn. The optical measurements performed at LABS during spring in 2013 were compared with those simultaneously performed at the Doi Ang Kang Meteorology Station, Chiang Mai Province, Thailand (DAK, 19.93 deg. N, 99.05 deg. E, 1536 m a.s.l.), which is located in the Southeast Asia BB source region. Furthermore, the relationships among [Sigma(sub s)], [Sigma(sub a)], and (b) were used to characterize the potential aerosol types transported to LABS during different seasons, and the data were inspected according to the HYSPLIT 5-day backward trajectories, which differentiate between different regions of air mass origin.

aerosol optical properties↗

ASTM Committee C28: International Standards for Properties and Performance of Advanced Ceramics, Three Decades of High-quality, Technically-rigorous Normalization

Physical and mechanical properties and performance of advanced ceramics and glasses are difficult to measure correctly without the proper techniques. For over three decades, ASTM Committee C28 on Advanced Ceramics, has developed high quality, rigorous, full-consensus standards (e.g., test methods, practices, guides, terminology) to measure properties and performance of monolithic and composite ceramics that may be applied to glasses in some cases. These standards testing particulars for many mechanical, physical, thermal, properties and performance of these materials. As a result these standards provide accurate, reliable, repeatable and complete data. Within Committee C28 users, producers, researchers, designers, academicians, etc. have written, continually updated, and validated through round-robin test programs, nearly 50 standards since the Committees founding in 1986. This paper provides a retrospective review of the 30 years of ASTM Committee C28 including a graphical pictogram listing of C28 standards along with examples of the tangible benefits of advanced ceramics standards to demonstrate their practical applications.

properties↗

Effect of Ex Vivo Ionizing Radiation on Static and Fatigue Properties of Mouse Vertebral Bodies

For a variety of medical and scientific reasons, human bones can be exposed to a wide range of ionizing radiation levels. In vivo radiation therapy (0.05 kGy) is used in cancer treatment, and ex vivo irradiation (25-35 kGy) is used to sterilize bone allografts. Ionizing radiation in these applications has been shown to increase risk of fracture, decrease bone quality and degrade collagen integrity. Past studies have investigated the deleterious effects of radiation on cortical or trabecular bone specimens individually, but to date no studies have examined whole bones containing both cortical and trabecular tissue. Furthermore, a clear relationship between the dose and the mechanical and biochemical response of bone's extracellular matrix has yet to be established for doses ranging from cancer therapy to allograft sterilization (0.05-35 kGy). To gain insight into these issues, we conducted an ex vivo radiation study to investigate non-cellular (i.e. matrix) effects of ionizing radiation dose on vertebral whole bone mechanical properties, over a range of radiation doses (0.05-35 kGy), with a focus on any radiation-induced changes in collagen. With underlying mechanisms of action in mind, we hypothesized that any induced reductions in mechanical properties would be associated with changes in collagen integrity. METHODS: 20-week old female mice were euthanized and the lumbar spine was dissected using IACUC approved protocols. The lumbar vertebrae (L1- S1) were extracted from the spine via cuts through adjacent intervertebral discs, and the endplates, posterior processes, surrounding musculature, and soft tissues were removed (approx. 1.5mm diameter, approx. 2mm height). Specimens were randomly assigned to one of five groups for ex vivo radiation exposure: x-ray irradiation at 0.05, 1, 17, or 35 kGy, or a 0 kGy control. Following irradiation, the vertebrae were imaged using microcomputed tomography (micro-CT) and then subjected to either monotonic compressive loading to failure or uniform cyclic compressive loading. During cyclic testing, samples were loaded in force control to a force level that corresponded to a strain of 0.46%, as determined in advance by a linearly elastic micro-CT-based finite element analysis for each specimen. Tests were stopped at imminent fracture, defined as a rapid increase in strain. The main outcome for the monotonic test was the strength (maximum force); for cyclic testing it was the fatigue life (log of the number of cycles of loading at imminent failure). A fluorometric assay was used on the S1 vertebrae to measure the number of non-enzymatic collagen crosslinks[4]. A one-way ANOVA was performed on mechanical properties and collagen crosslinks; means were compared with controls using Dunnett's method, with a Tukey-Kramer post-hoc analysis when significance was found (p < or = 0.05). RESULTS: Compared to the unirradiated control group, the concentration of non-enzymatic collagen crosslinks was significantly increased for all irradiated groups (p < 0.0001), and being higher by at least 50% (Figure 1a). By contrast, the radiation effects on the collagen were only evident at the higher doses. For irradiation exposures of 17 kGy or more, strength decreased substantially as the radiation level was increased, but no effect was evident below 17 kGy (Figure 1b). There was no significant change in the stiffness or maximum displacement for any radiation dose (p>0.05). The finite element analysis prescribed force level for cyclic loading exceeded the measured (monotonic) strength of the 17 and 35 kGy irradiated groups (mean +/- SD, 20.6 +/- 5.6 N; 13.2 +/- 3.7 N, respectively) and therefore these groups were eliminated from the fatigue study. The fatigue life for the 0.05 and 1 kGy groups were similar to each other and were not statistically significantly different from the control group (Figure 1c).

radiation↗

Composition-property correlations in NiTi-based shape memory alloys from the first principles

Development of shape memory alloys (SMA) has been traditionally accomplished by means of extensive empirical efforts, with a very limited support from phenomenological models and related tools. We present a theoretical framework based on the Hamiltonian formalism, which connects important thermodynamic properties directly to the relative energies (the eigenvalues of the Hamiltonian), computed from the first principles using density functional theory. The estimates based on this formalism allow to establish correlations between composition and physical properties, such as relative energies, phase transition temperatures, hysteresis, thermal expansion, and other thermodynamic information. Importantly, estimates and correlations not only provide a fast answer, but also elucidate underpinning of thermodynamic features in terms of the electronic structure. Using this framework, we consider phase transformations and correlations between the selected properties and composition in the NiTi-based ternary and multicomponent shape memory alloys. Our theoretical guidance facilitates design and development of future alloys.

shape memory alloys↗

AeroCom Phase III Multi-Model Evaluation of the Aerosol Life Cycle and Optical Properties Using Ground and Space-Based Remote Sensing as Well as Surface In Situ Observations

Within the framework of the AeroCom (Aerosol Comparisons between Observations and Models) initiative, the state-of-the-art modelling of aerosol optical properties is assessed from 14 global models participating in the phase III control experiment (AP3). The models are similar to CMIP6/AerChemMIP Earth System Models (ESMs) and provide a robust multi-model ensemble. Inter-model spread of aerosol species lifetimes and emissions appears to be similar to that of mass extinction coefficients (MECs), suggesting that aerosol optical depth (AOD) uncertainties are associated with a broad spectrum of parameterised aerosol processes. Total AOD is approximately the same as in AeroCom phase I (AP1) simulations. However, we find a 50 % decrease in the optical depth (OD) of black carbon (BC), attributable to a combination of decreased emissions and lifetimes. Relative contributions from sea salt (SS) and dust (DU) have shifted from being approximately equal in AP1 to SS contributing about 2∕3 of the natural AOD in AP3. This shift is linked with a decrease in DU mass burden, a lower DU MEC, and a slight decrease in DU lifetime, suggesting coarser DU particle sizes in AP3 compared to AP1. Relative to observations, the AP3 ensemble median and most of the participating models underestimate all aerosol optical properties investigated, that is, total AOD as well as fine and coarse AOD (AODf, AODc), Ångström exponent (AE), dry surface scattering (SCdry), and absorption (ACdry) coefficients. Compared to AERONET, the models underestimate total AOD by ca. 21 % ± 20 % (as inferred from the ensemble median and interquartile range). Against satellite data, the ensemble AOD biases range from −37 % (MODIS-Terra) to −16 % (MERGED-FMI, a multi-satellite AOD product), which we explain by differences between individual satellites and AERONET measurements themselves. Correlation coefficients (R) between model and observation AOD records are generally high (R>0.75), suggesting that the models are capable of capturing spatio-temporal variations in AOD. We find a much larger underestimate in coarse AODc (∼ −45 % ± 25 %) than in fine AODf (∼ −15 % ± 25 %) with slightly increased inter-model spread compared to total AOD. These results indicate problems in the modelling of DU and SS. The AODc bias is likely due to missing DU over continental land masses (particularly over the United States, SE Asia, and S. America), while marine AERONET sites and the AATSR SU satellite data suggest more moderate oceanic biases in AODc. Column AEs are underestimated by about 10 % ± 16 %. For situations in which measurements show AE > 2, models underestimate AERONET AE by ca. 35 %. In contrast, all models (but one) exhibit large overestimates in AE when coarse aerosol dominates (bias ca. +140 % if observed AE < 0.5). Simulated AE does not span the observed AE variability. These results indicate that models overestimate particle size (or underestimate the fine-mode fraction) for fine-dominated aerosol and underestimate size (or overestimate the fine-mode fraction) for coarse-dominated aerosol. This must have implications for lifetime, water uptake, scattering enhancement, and the aerosol radiative effect, which we can not quantify at this moment. Comparison against Global Atmosphere Watch (GAW) in situ data results in mean bias and inter-model variations of −35 % ± 25 % and −20 % ± 18 % for SCdry and ACdry, respectively. The larger underestimate of SCdry than ACdry suggests the models will simulate an aerosol single scattering albedo that is too low. The larger underestimate of SCdry than ambient air AOD is consistent with recent findings that models overestimate scattering enhancement due to hygroscopic growth. The broadly consistent negative bias in AOD and surface scattering suggests an underestimate of aerosol radiative effects in current global aerosol models. Considerable inter-model diversity in the simulated optical properties is often found in regions that are, unfortunately, not or only sparsely covered by ground-based observations. This includes, for instance, the Sahara, Amazonia, central Australia, and the South Pacific. This highlights the need for a better site coverage in the observations, which would enable us to better assess the models, but also the performance of satellite products in these regions. Using fine-mode AOD as a proxy for present-day aerosol forcing estimates, our results suggest that models underestimate aerosol forcing by ca. −15 %, however, with a considerably large interquartile range, suggesting a spread between −35 % and +10 %.

space-based remote sensing↗

Consequences of Asteroid Characterization on the State of Knowledge about Inferred Physical Properties and Impact Risk

Physical characteristics of Near-Earth Objects (NEOs) are essential inputs to planetary defense assessments. The size, density, and strength of an NEO are critical inputs to modeling behavior during atmospheric entry as well as assessing the risk of impact. Similarly, knowledge of the physical characteristics of an object are necessary to evaluate the probable result of a mitigation mission. Usually, these attributes cannot be directly measured, but increasingly sophisticated methods have been developed to infer physical properties from related measurements of asteroids, meteors, and/or meteorites. Fortuitously, some of these measurements have been obtained for enough NEOs to elucidate the distribution of values across the sampled population. However, the situation becomes more challenging when considering a specific asteroid, since it is unlikely that all the relevant measurements have been made for any given object. We have developed a Bayesian network that can combine available information about a particular NEO with knowledge of the larger population to infer probabilistic values and uncertainties for physical characteristics of interest. Distributions of asteroid population albedos, taxonomic classes, and macroporosities, along with meteorite density distributions and associations between taxonomic classes and meteorite classes, provide the default distributions for the network’s parameter nodes. The inference network links parameters for each virtual asteroid either deterministically or probabilistically as appropriate, and eliminates any unphysical combinations of parameters. Within the context of planetary defense, our Bayesian network can be used to constrain the ranges of likely impactor properties, which can subsequently reduce the uncertainty in modelling of atmospheric entry, mitigation efficacy, and impact risk assessment. When additional measurements become available for a specific object, the network incorporates those measurements to generate virtual asteroids with property distributions that are consistent with the measurements. We will use the 2023 PDC scenario to demonstrate how the inference network can be combined with plausible characterization measurements to refine the state of knowledge about likely combinations of physical parameters and the resulting impact risk.

risk assessment↗

Consequences of Asteroid Characterization on the State of Knowledge about Inferred Physical Properties and Impact Risk

Physical characteristics of Near-Earth Objects (NEOs) are essential inputs to planetary defense assessments. The size, density, and strength of an NEO are critical inputs to modeling behavior during atmospheric entry as well as assessing the risk of impact. Similarly, knowledge of the physical characteristics of an object are necessary to evaluate the probable result of a mitigation mission. Usually, these attributes cannot be directly measured, but increasingly sophisticated methods have been developed to infer physical properties from related measurements of asteroids, meteors, and/or meteorites. Fortuitously, some of these measurements have been obtained for enough NEOs to elucidate the distribution of values across the sampled population. However, the situation becomes more challenging when considering a specific asteroid, since it is unlikely that all the relevant measurements have been made for any given object. We have developed a Bayesian network that can combine available information about a particular NEO with knowledge of the larger population to infer probabilistic values and uncertainties for physical characteristics of interest. Distributions of asteroid population albedos, taxonomic classes, and macroporosities, along with meteorite density distributions and associations between taxonomic classes and meteorite classes, provide the default distributions for the network’s parameter nodes. The inference network links parameters for each virtual asteroid either deterministically or probabilistically as appropriate, and eliminates any unphysical combinations of parameters. Within the context of planetary defense, our Bayesian network can be used to constrain the ranges of likely impactor properties, which can subsequently reduce the uncertainty in modelling of atmospheric entry, mitigation efficacy, and impact risk assessment. When additional measurements become available for a specific object, the network incorporates those measurements to generate virtual asteroids with property distributions that are consistent with the measurements. We will use the 2023 PDC scenario to demonstrate how the inference network can be combined with plausible characterization measurements to refine the state of knowledge about likely combinations of physical parameters and the resulting impact risk.

risk assessment↗

Diagnosis of Antarctic Blowing Snow Properties Using MERRA-2 Reanalysis with a Machine Learning Model

This paper presents the work on using a machine learning model to diagnose Antarctic blowing snow (BLSN) properties with the Modern Era Retrospective analysis for Research and Applications v2 (MERRA-2) data. We adopt the random forest classifier for BLSN identification and the random forest regressor for BLSN optical depth and height diagnosis. BLSN properties observed from the Cloud-Aerosol Lidar and Infrared Pathfinder Satellite Observation (CALIPSO) are used as the truth for training the model. Using MERRA-2 fields such as snow age, surface elevation and pressure, temperature, specific humidity, and temperature gradient at the 2m level, and wind speed at the 10m level as input, reasonable results are achieved. Hourly blowing snow property diagnostics are generated with the trained model. Using the year 2010 as an example, it is shown that the Antarctic BLSN frequency is much higher over East than West Antarctica. High frequency months are from April to September, during which BLSN frequency exceeds 20% over East Antarctica. For May 2010, the BLSN snow frequency in the region is as high as 37%. Due to the suppression by strong surface-based inversions, larger values of BLSN height and optical depth are usually limited to the coastal regions, wherein the strength of surface-based inversions is weaker.

Antarctic↗

Seismic Velocities of the Tagish Lake Meteorite: Exploring Sample Size Limits for Elastic Property Determination

Understanding the mechanical and elastic properties of rocks comprising asteroids is be-coming of greater practical importance as more spacecraft interact with them (e.g. OSIRIS-REx, Hayabusa2, DART). However, knowledge of asteroid lithologies’ physical properties is limited due to sample paucity and the resulting challenges that come with working with small samples. Measuring seismic velocities is one way to directly and indirectly (through relation-ships established with analog materials) explore elastic and strength properties, respectively, while minimizing use of available material. While sample preparation requires cutting, the seismic measurements are non-destructive.

physical properties↗

Manual of typical low temperature mechanical properties of several materials

Manual contains information resulting from tests regarding low temperature properties of a number of materials commonly used in aerospace. The mechanical properties data are presented for 54 commonly used materials. The data is taken from many sources and is averaged and adjusted to represent the properties of typical material.

Malin, C. O.↗

Dielectric properties of battery electrolytes

An effort was made to determine the effects of electromagnetic radiation on the terminal properties of electrochemical cells. Various constituents of the battery were measured to determine basic electromagnetic properties. These properties were used to predict how much radiation would be absorbed by a battery in a particular field configuration. The frequency range covered from 0 to 40 GHz with the greatest emphasis on the microwave range from 2.6 to 40 GHz. The measurements were made on NiCd, AgZn, and Pb acid cells. Results from observation show nothing which suggested any interaction between radiation and cells, and no incidence of any peaks of energy absorption was observed.

Source record↗

Lunar surface engineering properties experiment definition

Research on the mechanics of lunar soils and on developing probes to determine the properties of lunar surface materials is summarized. The areas of investigation include the following: soil simulation, soil property determination using an impact penetrometer, soil stabilization using urethane foam or phenolic resin, effects of rolling boulders down lunar slopes, design of borehole jack and its use in determining failure mechanisms and properties of rocks, and development of a permeability probe for measuring fluid flow through porous lunar surface materials.

Mitchell, J. K.↗

Design properties of randomly reinforced fiber composites

The pseudoisotropic-laminate analogy is used in conjunction with fiber composite micro- and macromechanics to predict the thermal and mechanical properties of planar randomly reinforced fiber composites (PRRFC). Theoretical results are presented for boron/aluminum, boron/epoxy, Thornel-50/epoxy, and S-glass/epoxy PRRFC. The results show that the thermal and elastic properties depend on both constituent materials and the fiber volume ratio. The strength depends also on the type of applied stress. In general, no simple ratio exists between the properties of unidirectional fiber composites and those of PRRFC. The data are presented in convenient graphical form to serve as an aid for design and/or analysis and also for further research in PRRFC. The residual stresses and the impact resistance are also theoretically examined.

Chamis, C. C.↗