Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Production”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Search for the production of W±W±W events at s =13 TeV

A search for the production of events containing three W bosons predicted by the standard model is reported. The search is based on a data sample of proton-proton collisions at a center-of-mass energy of 13 TeV recorded by the CMS experiment at the CERN LHC and corresponding to a total integrated luminosity of 35.9 fb-1. The search is performed in final states with three leptons (electrons or muons), or with two same-charge leptons plus two jets. The observed (expected) significance of the signal for W±W±W production is 0.60 (1.78) standard deviations, and the ratio of the measured signal yield to that expected from the standard model is 0.34-0.34+0.62. Limits are placed on three anomalous quartic gauge couplings and on the production of massive axionlike particles.

60 APPLIED LIFE SCIENCES↗

Z{gamma}{gamma} production with leptonic decays and triple photon production at next-to-leading order QCD

We present a calculation of the O({alpha}{sub s}) QCD corrections to the production of a Z boson in association with two photons and to triple-photon production at hadron colliders. All final-state photons are taken as real. For the Z boson, we consider the decays both into charged leptons and into neutrinos including all off-shell effects. Numerical results are obtained via a Monte Carlo program based on the structure of the VBFNLO program package. This allows us to implement general cuts and distributions of the final-state particles. We find that the next-to-leading order QCD corrections are sizable and significantly exceed the expectations from a scale variation of the leading-order result. In addition, differential distributions of important observables change considerably. The prediction of two-photon-associated Z production with Z decays into neutrinos from the charged-lepton rate works well, once we use an additional cut on the invariant mass of the charged-lepton pair.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for Chargino-Neutralino Production in pp Collisions at {radical}(s)=1.96 TeV

We present a search for associated production of the chargino and neutralino supersymmetric particles using up to 1.1 fb{sup -1} of integrated luminosity collected by the CDF II experiment at the Tevatron pp collider at {radical}(s)=1.96 TeV. We analyze events with a large transverse momentum imbalance and either three charged leptons or two charged leptons of the same electric charge. The numbers of observed events are consistent with standard model expectations. Upper limits on the production cross section are derived in different theoretical models.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Data for Aboveground rather than belowground productivity drives variability in Miscanthus x giganteus net primary productivity

This dataset contains the data used for the publication “Aboveground rather than belowground productivity drives variability in Miscanthus x giganteus net primary productivity”. This dataset contains Miscanthus x giganteus biomass, carbon, and nitrogen tissue data for aboveground and belowground plant parts collected in 2021 for three different sites in Iowa with three different nitrogen application rates. Data at the Iowa sites were collected via biometric hand harvesting, belowground excavations, and soil coring both in-clump and beside-clump. Data were collected at two collection timepoints to calculate the contributions of belowground parts to Miscanthus x giganteus net primary productivity. This dataset also includes Miscanthus x giganteus and Switchgrass soil coring and excavation data collected in 2012 at the University of Illinois Urbana Champaign Energy Farm.

Belowground Biomass↗

Proliferation Risks of Magneetic Fusion Energy: Clandestine Production, Covert Production and Breakout

Nuclear proliferation risks from magnetic fusion energy associated with access to weapon-usable materials can be divided into three main categories: (1) clandestine production of weapon-usable material in an undeclared facility, (2) covert production of such material inn a declared facility, and (3) use of a declared facility in a breakout scenario, in which a state begins production of fissile material without concealing the effort. In this paper we address each of these categories of risks from fusion. For each case, we find that the proliferation risk from fusion systems can be much lower than the equivalent risk from fission systems, if the fusion system is designed to accommodate appropriate safeguards.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Search for WW and WZ production in lepton, neutrino plus jets final states at CDF Run II and Silicon module production and detector control system for the ATLAS SemiConductor Tracker

In the first part of this work, we present a search for WW and WZ production in charged lepton, neutrino plus jets final states produced in p$\bar{p}$ collisions with √s = 1.96 TeV at the Fermilab Tevatron, using 1.2 fb -1 of data accumulated with the CDF II detector. This channel is yet to be observed in hadron colliders due to the large singleWplus jets background. However, this decay mode has a much larger branching fraction than the cleaner fully leptonic mode making it more sensitive to anomalous triple gauge couplings that manifest themselves at higher transverse W momentum. Because the final state is topologically similar to associated production of a Higgs boson with a W, the techniques developed in this analysis are also applicable in that search. An Artificial Neural Network has been used for the event selection optimization. The theoretical prediction for the cross section is σ WW/WZ theory x Br(W → ℓv; W/Z → jj) = 2.09 ± 0.14 pb. They measured N Signal = 410 ± 212(stat) ± 102(sys) signal events that correspond to a cross section σ WW/WZ x Br(W → ℓv; W/Z → jj) = 1.47 ± 0.77(stat) ± 0.38(sys) pb. The 95% CL upper limit to the cross section is estimated to be σ x Br(W → ℓv; W/Z → jj) < 2.88 pb. The second part of the present work is technical and concerns the ATLAS SemiConductor Tracker (SCT) assembly phase. Although technical, the work in the SCT assembly phase is of prime importance for the good performance of the detector during data taking. The production at the University of Geneva of approximately one third of the silicon microstrip end-cap modules is presented. This collaborative effort of the university of Geneva group that lasted two years, resulted in 655 produced modules, 97% of which were good modules, constructed within the mechanical and electrical specifications and delivered in the SCT collaboration for assembly on the end-cap disks. The SCT end-caps and barrels consist of 4088 silicon modules, with a total of 6.3 million readout channels. The coherent and safe operation of the SCT during commissioning and subsequent operation is the essential task of the Detector Control System (DCS). The main building blocks of the DCS are the cooling system, the power supplies and the environmental system. The DCS has been initially developed for the SCT assembly phase and this system is described in the present work. Particular emphasis is given in the environmental hardware and software components, that were my major contributions. Results from the DCS testing during the assembly phase are also reported.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Wind turbine power production and annual energy production depend on atmospheric stability and turbulence

Using detailed upwind and nacelle-based measurements from a General Electric (GE) 1.5sle model with a 77 m rotor diameter, we calculate power curves and annual energy production (AEP) and explore their sensitivity to different atmospheric parameters to provide guidelines for the use of stability and turbulence filters in segregating power curves. The wind measurements upwind of the turbine include anemometers mounted on a 135 m meteorological tower as well as profiles from a lidar. We calculate power curves for different regimes based on turbulence parameters such as turbulence intensity (TI) as well as atmospheric stability parameters such as the bulk Richardson number ( R B ). We also calculate AEP with and without these atmospheric filters and highlight differences between the results of these calculations. The power curves for different TI regimes reveal that increased TI undermines power production at wind speeds near rated, but TI increases power production at lower wind speeds at this site, the US Department of Energy (DOE) National Wind Technology Center (NWTC). Similarly, power curves for different R B regimes reveal that periods of stable conditions produce more power at wind speeds near rated and periods of unstable conditions produce more power at lower wind speeds. AEP results suggest that calculations without filtering for these atmospheric regimes may overestimate the AEP. Because of statistically significant differences between power curves and AEP calculated with these turbulence and stability filters for this turbine at this site, we suggest implementing an additional step in analyzing power performance data to incorporate effects of atmospheric stability and turbulence across the rotor disk.

17 WIND ENERGY↗

Recent Amplified Global Gross Primary Productivity Due to Temperature Increase is Offset by Reduced Productivity Due to Water Constraints

Satellite remote sensing observationsshow an increased greenness trend over land in recent decades. Whilegreennessobservationscanindicateincreased productivity, estimation of total annual productivity is highly dependent on vegetation response to climate and environmental conditions. Models have been struggling to determinehow much carbon is taken up by plants as a result of increased atmospheric CO2fertilization. Current remote sensing light use efficiency (LUE) models contain considerable uncertainty due to the lack of spatial and temporal variability in maximum LUE parameter and climate sensitivity defined for global plantfunctional types (PFTs). We usedthe optimum LUE (LUEopt) previously derived fromtheglobal FLUXNET network to improve estimation of global gross primary productivity (GPP)for the period 1982–2016. Our results indicateincreasing GPP in northern latitudesowing to reduced cold temperature constraintson plant growth, thereby suggesting increasing negative carbon-climate feedbackin high latitudes. In the tropics, by contrast, our results indicate an emerging positive climate feedback,mainly due to increasing atmospheric vapor pressure deficit(VPD).Further pervasive VPD increase is likely to continue to reduce global GPPand amplify carbon emissions.

Climate change↗

Proliferation Risks of Fusion Energy: Clandestine Production, Covert Production, and Breakout

Nuclear proliferation risks from fusion associated with access to weapon-usable material can be divided into three main categories: 1) clandestine production of fissile material in an undeclared facility, 2) covert production of such material in a declared and safeguarded facility, and 3) use of a declared facility in a breakout scenario, in which a state begins production of fissile material without concealing the effort. In this paper we address each of these categories of risk from fusion. For each case, we find that the proliferation risk from fusion systems can be much lower than the equivalent risk from fission systems, if commercial fusion systems are designed to accommodate appropriate safeguards.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Environmental chamber measurements of mercury flux from coal utilization by-products

An environmental chamber was constructed to measure the mercury flux from coal utilization by-product (CUB) samples. Samples of fly ash, FGD gypsum, and wallboard made from FGD gypsum were tested under both dark and illuminated conditions with or without the addition of water to the sample. Mercury releases varied widely, with 7-day experiment averages ranging from -6.8 to 73 ng/m2 h for the fly ash samples and -5.2 to 335 ng/m2 h for the FGD/wallboard samples. Initial mercury content, fly ash type, and light exposure had no observable consistent effects on the mercury flux. For the fly ash samples, the effect of a mercury control technology was to decrease the emission. For three of the four pairs of FGD gypsum and wallboard samples, the wallboard sample released less (or absorbed more) mercury than the gypsum.

20 FOSSIL-FUELED POWER PLANTS↗

Measurement of the top quark pair production cross section in pp collisions at root s=7 TeV in dilepton final states with ATLAS

A measurement of the production cross section of top quark pairs (t{bar t}) in proton-proton collisions at a center-of-mass energy of 7 TeV recorded with the ATLAS detector at the Large Hadron Collider is reported. Candidate events are selected in the dilepton topology with large missing transverse energy and at least two jets. Using a data sample corresponding to an integrated luminosity of 35 pb{sup -1}, a t{bar t} production cross section {sigma}{sub t{bar t}} = 177 {+-} 20(stat.) {+-} 14(syst.) {+-} 7(lum.) pb is measured for an assumed top quark mass of mt = 172.5 GeV. A second measurement requiring at least one jet identified as coming from a b quark yields a comparable result, demonstrating that the dilepton final states are consistent with being accompanied by b-quark jets. These measurements are in good agreement with Standard Model predictions.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Searches for squark and gluino production at the Tevatron

This paper reviews some of the most recent results from CDF and D0 experiments on searches for supersymmetry (SUSY) at the Tevatron. We focus on searches for squark and gluino pair production on data samples up to {approx} 2 fb{sup -1}. No signal was observed, and constraints are set on the SUSY parameter space.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Search for pair production of the supersymmetric partner of the top quark in the t-tildet-tilde->bbe{sup +}-mu{sup +}-v-tildev-tilde decay channel at DOe

We report the result of a search for the pair production of the light top squark decaying to two bottom quarks, an electron, a muon, and two sneutrinos in 3.1+-0.19 fb{sup -1} of data from the DOe detector at the Tevatron, Fermilab's sq root(s) = 1.96 TeV pp-bar collider. No significant excess of events above the standard model prediction was detected and new exclusion limits at the 95% confidence level have been set for a portion of the stop mass-sneutrino mass plane.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

A study of H+ production using metal hydride and other compounds by means of laser ion source

A laser ion source can provide wide variety of ion beams from solid target materials, however, it has been difficult to create proton beam efficiently. We examined capability of proton production using beeswax, polyethylene, and metal hydrides (MgH2 and ZrH2) as target materials. The results showed that beeswax and polyethylene could not be used to produce protons because these targets are transparent to the laser wavelength of 1064 nm. On the other hand, the metal hydrides could supply protons. Although the obtained particle numbers of protons were less than those of the metal ions, the metal hydrides could be used as a target for proton laser ion source.

08 HYDROGEN↗

Identified particle production, azimuthal anisotropy, and interferometry measurements in Au+Au collisions at sq root(s{sub NN})=9.2 GeV

We present the first measurements of identified hadron production, azimuthal anisotropy, and pion interferometry from Au+Au collisions below the nominal injection energy at the BNL Relativistic Heavy-Ion Collider (RHIC) facility. The data were collected using the large acceptance solenoidal tracker at RHIC (STAR) detector at sq root(s{sub NN})=9.2 GeV from a test run of the collider in the year 2008. Midrapidity results on multiplicity density dN/dy in rapidity y, average transverse momentum <p{sub T}>, particle ratios, elliptic flow, and Hanbury-Brown-Twiss (HBT) radii are consistent with the corresponding results at similar sq root(s{sub NN}) from fixed-target experiments. Directed flow measurements are presented for both midrapidity and forward-rapidity regions. Furthermore the collision centrality dependence of identified particle dN/dy, <p{sub T}>, and particle ratios are discussed. These results also demonstrate that the capabilities of the STAR detector, although optimized for sq root(s{sub NN})=200 GeV, are suitable for the proposed QCD critical-point search and exploration of the QCD phase diagram at RHIC.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Coal combustion products 2007 production and use report

The American Coal Ash Association's 2007 Annual Coal Combustion Products (CCP) are derived from data from more than 170 power plants. The amount of CCPs used was 40.55%, a decrease of 2.88% from 2006, attributed to reduced fuel burn and a decrease in demand in the building industry. Figures are given for the production of fly ash, flue gas desulfurization gypsum, bottom ash, FBC ash and boiler slag. The article summarises results of the survey. 1 ref., 1 tab.

01 COAL, LIGNITE, AND PEAT↗