Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Precise orbit determination”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Angular momentum exchange in white dwarf binaries accreting through direct impact

We examine the exchange of angular momentum between the component spins and the orbit in semi-detached double white dwarf binaries undergoing mass transfer through direct impact of the transfer stream. We approximate the stream as a series of discrete massive particles ejected in the ballistic limit at the inner Lagrangian point of the donor toward the accretor. This work improves upon similar earlier studies in a number of ways. First, we self-consistently calculate the total angular momentum of the orbit at all times. This includes changes in the orbital angular momentum during the ballistic trajectory of the ejected mass, as well as changes during the ejection/accretion due to the radial component of the particle's velocity. Second, we calculate the particle's ballistic trajectory for each system, which allows us to determine the precise position and velocity of the particle upon accretion. We can then include specific information about the radius of the accretor as well as the angle of impact. Finally, we ensure that the total angular momentum is conserved, which requires the donor star spin to vary self-consistently. With these improvements, we calculate the angular momentum change of the orbit and each binary component across the entire parameter space of direct impact double white dwarf binary systems. We find a significant decrease in the amount of angular momentum removed from the orbit during mass transfer, as well as cases where this process increases the angular momentum of the orbit at the expense of the spin angular momentum of the donor. We conclude that, unlike earlier claims in the literature, mass transfer through direct impact need not destabilize the binary and that the quantity and sign of the orbital angular momentum transfer depends on the binary properties, particularly the masses of the double white dwarf binary component stars. This stabilization may significantly impact the population synthesis calculations of the expected numbers of events/systems for which double white dwarfs may be a progenitor, e.g., Type Ia supernovae, Type.Ia supernovae, and AM CVn.

79 ASTRONOMY AND ASTROPHYSICS↗

Tracking the Relative Motion of Four Space Payloads Launched From a Sub-Orbital NASA Rocket

One problem, which is comparatively new in the field of GPS applications, is the determination of the relative trajectories of space vehicles. Applications include the docking of spacecraft, collision avoidance in the area of space stations, and trajectory reconstruction of multiple payloads. The required precision in any of these applications will vary, according to the requirements of the task and abilities of GPS to cope with the environment and the dynamics. This paper describes the post-mission reconstruction of the relative trajectories of four GPS receivers attached to four payloads jettisoned from a rocket in a sub-orbital NASA science mission. It is shown that the sub-decimetre level were achieved with single frequency GPS receivers.

Martel, Hugh↗

Determination of parameters related to the interior of Mercury.

Discussion of the determination possibilities and requirements for certain crucial inertia-moment and radial-mass-distribution parameters of Mercury. It is shown that the high precision of 1 min of arc, which reasonable bounds on some of these parameters demand, cannot be obtained by either earth-based observations or the television imagery of the Mariner 73 flyby. Some methods are proposed for both landers and orbiters that could determine unambiguously most of these parameters.

Peale, S. J.↗

MP2 energy and density for large molecular systems with internal error control using the Divide-Expand-Consolidate scheme

Divide-Expand-Consolidate (DEC) is a local correlation method where the inherent locality of the electron correlation problem is used to express the correlated calculation on a large molecular system in terms of small independent fragment calculations employing small subsets of local HF orbitals. A crucial feature of the DEC scheme is that the sizes of the local orbital spaces are determined in a black box manner during the calculation. In this way it is ensured that the correlation energy has been determined to a predefined precision compared to a conventional calculation. In the present work we apply the DEC scheme to calculate the correlation energy as well as the electron density matrix for the insulin molecule using second order Møller–Plesset (MP2) theory. This is the first DEC calculation on a molecular system which is too large to be treated using a conventional MP2 implementation. The fragmentation errors for the insulin DEC calculation are carefully analyzed using internal consistency checks. It is demonstrated that size-intensive properties are determined to the same precision for small and large molecules. For example, the percentage of correlation energy recovered and the error per electron in the correlated density matrix depend only on the predefined precision and not on the molecular size.

Chemistry↗

GEOS 3 data processing for the recovery of geoid undulations and gravity anomalies

The paper discusses the analysis of GEOS 3 altimeter data for the determination of geoid heights and point and mean gravity anomalies. Methods are presented for determining the mean anomalies and mean undulations from the GEOS 3 altimeter data available by the end of September 1977 without having a complete set of precise orbits. The editing of the data is extensive to remove questionable data, although no filtering of the data is carried out. An adjustment process is carried out to eliminate orbit error and altimeter bias. Representative point anomaly values are computed to investigate anomaly behavior across the Bonin Trench and over the Patton seamounts.

Rapp, R. H.↗

A Southern Hemisphere radar meteor orbit survey

A meteor radar system has been operated on a routine basis near Christchurch, New Zealand, to determine the orbits of Earth-impacting interplanetary dust and meteoroids. The system sensitivity is +13 visual magnitude, corresponding to approximately 100 micron sized meteoroids. With an orbital precision of 2 degrees in angular elements and 10 percent in orbital energy (1/a), the operation yields an average of 1500 orbits daily with a total to date in excess of 10(exp 5). The use of pc's and automated data reduction permit the large orbital data sets we collect to be routinely reduced. Some illustrative examples are presented of the signal formats/processing and the results of data reduction, giving the individual orbital elements and hence the overall distributions. Current studies include the distribution of dust in the inner solar system; the influx of meteoroids associated with near-Earth asteroids; and the orbital structure existing in comet-produced streams.

Baggaley, W. Jack↗

Techniques and applications of SAR interferometry for ERS-1

The ERS-1 Synthetic Aperture Radar (SAR) demonstrated that it is possible to measure high resolution topography over large areas using interferometry with repeat orbit data sets. Given that the ERS-1 orbit is known with high precision, an automatic system for generation of interferograms is presented. Least squares estimation using ground control points provides an accurate method for determining the precise interferometric baseline. The system parameters which affect the accuracy of the Digital Elevation Models (DEM's) are errors in the interferometric baseline, decorrelation caused by baseline separation, thermal noise, and surface change. An adaptive filter based on the local interferometric coherence was developed to improve phase unwrapping of the interferogram. Final accuracies of the DEM's generated for single scene pairs in Alaska (U.S.) and Bonn (Germany) are on the order of 5 to 10 m.

Werner, Charles L.↗

Validating Ancient Age of the Buried Floor of the Northern Lowlands, Mars

Hesperian and Amazonian plains units cover the northern lowlands but little is known about what this surface covers. Models for the creation of the lowlands and the dichotomy boundary implement mechanisms which vary from internal processes, such as plate tectonics or first-order mantle convection, to external processes, such as a single large impact or multiple impacts. Different models require different time scales for low-land formation; determining the age of the buried low-land surface would help constrain the formation models. The Mars Orbiting Laser Altimeter (MOLA) has yielded a high-precision, topographic gridded data set that reveals the presence of Quasi-Circular Depressions (QCDs) in both the southern highlands and the northern lowlands. Most of these roughly circular depressions have no corresponding visible structural feature on the surface. It is proposed that these QCDs are the surface representation of buried impact craters. Based on this assumption, cumulative number vs. diameter curves were constructed, which placed the age of the buried surface of the northern lowlands in the Early or pre-Noachian. A Noachian basement is supported by the remnants of large craters and multi-ring basins discovered in earlier research, but the QCDs provide the first evidence of this for the entire lowland. Constraining the age of the basement floor to the earliest Noachian, however, would require that the process that formed the northern lowlands either occurred in the early Noachian or involves removal of material from the bottom of the crust without destroying the previously formed craters to achieve the modeled crustal thinning. But can we establish that the QCDs do in fact represent buried impact craters, and thus validate an Early Noachian age for the buried lowland floor?

Buczkowski, D. L.↗

Orbit determination of geosynchronous satellites by VLBI and differential VLBI

Four approaches to radio interferometric tracking of geosynchronous satellites are analyzed and compared. Quasar-based differential very-long-baseline interferometry, which requires a very sensitive receiver, can achieve meter-level position accuracy with a two-baseline system. Satellite-based differential VLBI gives somewhat lower accuracy with a compact, inexpensive receiver. Nondifferential VLBI, using less precise media and clock calibrations obtained by observing the GPS satellites, still gives 5-10 m position accuracy with two baselines. For a sufficiently inclined orbit, all interferometric approaches can yield six-component satellite state from a single baseline.

Yunck, T. P.↗

Few millimeter precision for baselines in the California Permanent GPS Geodetic Array

Geodetic measurements with Rogue GPS receivers from sites in the California Permanent GPS geodetic Array (PGGA) have been analyzed using the GIPSY orbit-determination and baseline-estimation software. Based on an unbiased selection of 23 daily measurements spanning 8 months, the LF contributions to the long-term repeatabilities of baseline measurements are approximately 5, 3, and 8 mm for the east, north, and vertical components. Short-term contributions to the long-term repeatabilities were evaluated by examining data from the week of October 21, 1990, which showed the lowest short-term scatter. For this week, daily repeatabilities of 2-3 mm in the horizontal and 4 mm in the vertical have been achieved for the 172-km JPL-Pinyon baseline, consistent with carrier phase date noise of about 6 mm. High quality (less than about 5 mm) repeatabilities have been achieved for all components of the other baselines as well.

Lindqwister, Ulf J.↗

On the photometric axis of the zodiacal light

A model of the zodiacal cloud is used to predict the position of the photometric axis (the locus of points of maximum brightness) of the zodiacal light at any elongation angle from the sun for any time of the year for various symmetry planes: the orbital planes of Venus, Mars, and Jupiter, the invariable plane, and the solar equatorial plane. Using a scattering function which combines isotropic scattering and Fresnel reflection, the geocentric distance of the dust that contributes most of the brightness at each elongation angle is determined by computing the brightness contribution along the line of sight. A comparison of the predicted and observed positions shows that at elongation angles of 15 to 60 deg, the axis of symmetry appears to be close to the orbital plane of Venus. At angles of less than 10 deg, it is difficult to distinguish among the proposed planes of symmetry. Observations of the photometric axis at angles of 60 to 180 deg are scarce and do not permit precise determination of the axis of symmetry in that region.

Misconi, N. Y.↗

The motions of satellites and asteroids - Natural probes of Jovian gravity

Before the recent Pioneer probes, our knowledge of Jupiter's gravitational field was obtained from the motions of satellites and asteroids. The study of orbital perturbations of asteroids near the 2:1 commensurability yielded a value of the mass of the Jupiter system at least as precise as that obtained by the artificial probes. Precession of the inner satellites' orbits placed constraints on the harmonic coefficients J2 and J4. A correction to the satellite determination of J4 lowers its mean value closer to the Pioneer result. The orbital grouping among the outer satellites and the resonance among the Galilean satellites are described in detail, but the origins of these phenomena are not understood. However, recent research suggests that the explanation will be intimately associated with models of the origin and evolution of the planet itself.

Greenberg, R. J.↗

The Mercury Laser Altimeter Instrument for the MESSENGER Mission

The Mercury Laser Altimeter (MLA) is one of the payload science instruments on the MErcury Surface, Space ENvironment, GEochemistry, and Ranging (MESSENGER) mission, which launched on 3 August 2004. The altimeter will measure the round trip time-of-flight of transmitted laser pulses reflected from the surface of the planet that, in combination with the spacecraft orbit position and pointing data, gives a high-precision measurement of surface topography referenced to Mercury's center of mass. The altimeter measurements will be used to determine the planet's forced librations by tracking the motion of large-scale topographic features as a function of time. MLA's laser pulse energy monitor and the echo pulse energy estimate will provide an active measurement of the surface reflectivity at 1064 nm. This paper describes the instrument design, prelaunch testing, calibration, and results of post-launch testing.

Cavanaugh, John F.↗

The CARMENES search for exoplanets around M dwarfs: Two planets on opposite sides of the radius gap transiting the nearby M dwarf LTT 3780

We present the discovery and characterisation of two transiting planets observed by the Transiting Exoplanet Survey Satellite (TESS) orbiting the nearby (d⋆ ≈ 22 pc), bright (J ≈ 9 mag) M3.5 dwarf LTT 3780 (TOI–732). We confirm both planets and their association with LTT 3780 via ground-based photometry and determine their masses using precise radial velocities measured with the CARMENES spectrograph. Precise stellar parameters determined from CARMENES high-resolution spectra confirm that LTT 3780 is a mid-M dwarf with an effective temperature of T(eff) = 3360 ± 51 K, a surface gravity of log g⋆ = 4.81 ± 0.04 (cgs), and an iron abundance of [Fe/H] = 0.09 ± 0.16 dex, with an inferred mass of M⋆ = 0.379 ± 0.016M⊙ and a radius of R⋆ = 0.382 ± 0.012R⊙. The ultra-short-period planet LTT 3780 b (P(b) = 0.77 d) with a radius of 1.35(−0.06,+0.06) R⊕, a mass of 2.34(−0.23,+0.24) M⊕, and a bulk density of 5.24(−0.81,+0.94) g/cu.cm joins the population of Earth-size planets with rocky, terrestrial composition. The outer planet, LTT 3780 c, with an orbital period of 12.25 d, radius of 2.42(−0.10,+0.10) R⊕, mass of 6.29(−0.61,+0.63) M⊕, and mean density of 2.45(−0.37,+0.44) g/cu.cm belongs to the population of dense sub-Neptunes. With the two planets located on opposite sides of the radius gap, this planetary system is an excellent target for testing planetary formation, evolution, and atmospheric models. In particular, LTT 3780 c is an ideal object for atmospheric studies with the James Webb Space Telescope (JWST).

G. Nowak↗

Determination of polar motion and earth rotation from laser tracking of satellites

Laser tracking of the Lageos spacecraft has been used to derive the position of the earth's pole of rotation at intervals during October, November and December 1976. The estimated precision of the results is 0.01 to 0.02 arcseconds in both x and y components, although the formal uncertainty is an order of magnitude better, and there is general agreement with the Bureau International de l'Heure smoothed pole path to about 0.02 arcseconds. Present orbit determination capability of Lageos is limited to about 25 cm rms fit to data over periods of 5 days and about 50 cm over 50 days. The present major sources of error in the perturbations of Lageos are earth and ocean tides followed by the earth's gravity field, and solar and earth reflected radiation pressure. Ultimate accuracy for polar motion and earth rotation from Lageos after improved modeling of the perturbing forces appears to be of order + or - 5 cm for polar motion over a period of about one day and about + or - 0.2 to + or - 0.3 milliseconds in UT for periods up to 2 or 3 months.

Smith, D. E.↗

Multi-beam laser altimeter

Laser altimetry provides a high-resolution, high-accuracy method for measurement of the elevation and horizontal variability of Earth-surface topography. The basis of the measurement is the timing of the round-trip propagation of short-duration pulses of laser radiation between a spacecraft and the Earth's surface. Vertical resolution of the altimetry measurement is determined primarily by laser pulsewidth, surface-induced spreading in time of the reflected pulse, and the timing precision of the altimeter electronics. With conventional gain-switched pulses from solid-state lasers and sub-nsec resolution electronics, sub-meter vertical range resolution is possible from orbital attitudes of several hundred kilometers. Horizontal resolution is a function of laser beam footprint size at the surface and the spacing between successive laser pulses. Laser divergence angle and altimeter platform height above the surface determine the laser footprint size at the surface, while laser pulse repetition-rate, laser transmitter beam configuration, and altimeter platform velocity determine the space between successive laser pulses. Multiple laser transitters in a singlaltimeter instrument provide across-track and along-track coverage that can be used to construct a range image of the Earth's surface. Other aspects of the multi-beam laser altimeter are discussed.

Bufton, Jack L.↗

Performance Analysis of the Spaceborne Laser Ranging System

The 'spaceborne laser ranging system' is a proposed short pulse laser on board an orbiting spacecraft. It measures the distances between the spacecraft and many laser retroreflectors (targets) deployed on the earth's surface. The precision of these range measurements was assumed to be about plus or minus 2 cm. These measurements were then used together with the orbital dynamics of the spacecraft to derive the intersite vector between the laser ground targets. The errors associated with this vector were on the order of 1 to 2 cm. The baseline distances determined range from 25 km to 1200 km. By repeating the measurements of the intersite vector, strain and strain rate errors were estimated. The realizable precision for intersite distance determination was estimated to be on the order of 0.5 cm at 300 km and about 1.5 cm at 1200 km. The corresponding inaccuracies for the intersite distances were larger, than is 1 cm and 3.5 cm respectively. The corresponding precision in the vertical direction was 1 cm and 3 cm.

Kahn, W. D.↗

The relation of the European Datum to a geocentric reference system

Over 31,000 precision reduced optical observations of GEOS-1 and 2 in 70 two-day orbital arcs were used at Goddard Space Flight Center (GSFC) in a dynamical solution to determine center-of-mass coordinates for 15 tracking stations on the European Datum. Comparisons with the results obtained at Centre National d'Etudes Spatiales (CNES) give agreement of about 1.5 ppm for chord lengths. After considering a scale correction to the European Datum (ED) of 1950 to account for the absence of geoid heights at the time of its reduction, agreement to a few ppm between the CNES/GSFC and the ED chords is obtained. However, a small systematic difference between survey and satellite results remains for stations in southeastern France and Switzerland.

Marsh, J. G.↗