Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “PRISMS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Dual waveband compact catadioptric imaging spectrometer

A catadioptric dual waveband imaging spectrometer that covers the visible through short-wave infrared, and the midwave infrared spectral regions, dispersing the visible through shortwave infrared with a zinc selenide grating and midwave infrared with a sapphire prism. The grating and prism are at the cold stop position, enabling the pupil to be split between them. The spectra for both wavebands are focused onto the relevant sections of a single dual waveband detector. Spatial keystone distortion is controlled to less than one tenth of a pixel over the full wavelength range, facilitating the matching of the spectra in the midwave infrared with the shorter wavelength region.

47 OTHER INSTRUMENTATION↗

Operational Performance Risk Assessment in Support of A Supervisory Control System

Supervisory control system (SCS) is developed for multi-unit advanced small modular reactors to minimize human interventions in both normal and abnormal operations. In SCS, control action decisions made based on probabilistic risk assessment approach via Event Trees/Fault Trees. Although traditional PRA tools are implemented, their scope is extended to normal operations and application is reversed; success of non-safety related system instead failure of safety systems this extended PRA approach called as operational performance risk assessment (OPRA). OPRA helps to identify success paths, combination of control actions for transients and to quantify these success paths to provide possible actions without activating plant protection system. In this paper, a case study of the OPRA in supervisory control system is demonstrated within the context of the ALMR PRISM design, specifically power conversion system. The scenario investigated involved a condition that the feed water control valve is observed to be drifting to the closed position. Alternative plant configurations were identified via OPRA that would allow the plant to continue to operate at full or reduced power. Dynamic analyses were performed with a thermal-hydraulic model of the ALMR PRISM system using Modelica to evaluate remained safety margins. Successful recovery paths for the selected scenario are identified and quantified via SCS.

Denning, Richard S.↗

Gradiometer configuration invariant to laser phase noise and sensor rotations

A system for gravity measurement includes one or more atom sources, two or more laser beams, and a polarizing beamsplitter and a retro-reflection prism assembly. The one or more atom sources is to provide three ensembles of atoms. The two or more laser beams is to cool or interrogate the three ensembles of atoms. The polarizing beamsplitter and the retro-reflection prism assembly are in a racetrack configuration. The racetrack configuration routes the two or more laser beams in opposing directions around a loop topology, intersecting the three ensembles of atoms with appropriate polarizations chosen for cooling or interferometer interrogation. The three ensembles of atoms are positioned coaxially when interrogated.

47 OTHER INSTRUMENTATION↗

Syntheses and characterization of novel lanthanide adamantine-dicarboxylate coordination complexes

Hydrothermal reactions of 1,10-phenanthroline (phen), 1,3-adamantanedicarboxylic acid (H{sub 2}L) and lanthanide chlorides yielded six compounds: [Ln(L)(HL)(phen)] (Ln=Pr, 1; Nd, 2), [Ln(L)(HL)(phen)(H{sub 2}O)] (Sm, 3; Eu, 4), [Tb(L)(HL)(phen)(H{sub 2}O)]{sub 2}.2H{sub 2}O (5), [Er{sub 3}(L){sub 4}(OH)(phen)]{sub 2} (6). Compounds 1-4 are structurally featured by one-dimensional polymeric chains; 5 hold binuclear structure constructed from eight-coordinated lanthanide center LnN{sub 2}O{sub 6} of distorted bicapped trigonal prism bridged by dicarboxylate ligands; 6 shows that erbium ions are in mono and bicapped trigonal prismatic geometries, respectively, which are further connected by {mu}{sub 3}-OH to give rise to trinuclear structure. Thermogravimetric analyses of 1, 3 and 5 were performed. Fluorescent measurements of 4 and 5 were carried out, respectively. - Grapical Abstract: Hydrothermal reactions of 1,10-phenanthroline, 1,3-adamantanedicarboxylic acid and lanthanide choloride yielded a novel supramolecular architectures constructed from polyhedral LnN{sub 2}O{sub 6} of distorted bicapped trigonal prism bridged by dicarboxylate.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Syntheses, crystal structures and spectroscopic properties of Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] and KAg{sub 2}[PS{sub 4}]

Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] (1) was obtained from the direct solid state reaction of Ag, Nb, P{sub 2}S{sub 5} and S at 500 deg. C. KAg{sub 2}[PS{sub 4}] (2) was prepared from the reaction of K{sub 2}S{sub 3}, Ag, Nd, P{sub 2}S{sub 5} and extra S powder at 700 deg. C. Compound 1 crystallizes in the orthorhombic space group Pnma with a=12.2188(11), b=26.3725(16), c=6.7517(4) A, V=2175.7(3) A{sup 3}, Z=8. Compound 2 crystallizes in the non-centrosymmetric tetragonal space group I4-bar2m with lattice parameters a=6.6471(7), c=8.1693(11) A, V=360.95(7) A{sup 3}, Z=2. The structure of Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] (1) consists of [Nb{sub 2}S{sub 12}], [P{sub 2}S{sub 6}] and new found puckered [Ag{sub 2}S{sub 4}] chains which are along [001] direction. The Nb atoms are located at the center of distorted bicapped trigonal prisms. Two prisms share square face of two [S{sub 2}{sup 2-}] to form one [Nb{sub 2}S{sub 12}] unit, in which Nb-Nb bond is formed. The [Nb{sub 2}S{sub 12}] units share all S{sup 2-} corners with ethane-like [P{sub 2}S{sub 6}] units to form 14-membered rings. The novel puckered [Ag{sub 2}S{sub 4}] chains are composed of distorted [AgS{sub 4}] tetrahedra and [AgS{sub 3}] triangles that share corners with each other. These chains are connected with [P{sub 2}S{sub 6}] units and [Nb{sub 2}S{sub 12}] units to form three-dimensional frame work. The structural skeleton of 2 is built up from [AgS{sub 4}] and [PS{sub 4}] tetrahedra linked by corner-sharing. The three-dimensional anionic framework contains orthogonal, intersecting tunnels directed along [100] and [010]. This compound possesses a compressed chalcopyrite-like structure. The structure is compressed along [001] and results from eight coordination sphere for K{sup +}. Both compounds are characterized with UV/vis diffuse reflectance spectroscopy and compound 1 with IR and Raman spectra. - Graphical abstract: The thiophosphates Ag{sub 2}Nb[P{sub 2}S{sub 6}][S{sub 2}] and KAg{sub 2}[PS{sub 4}] crystallize as three-dimensional networks. A remarkable structural feature of the former compound is a [Ag{sub 2}S{sub 4}] chain composed of [AgS{sub 4}] tetrahedra and [AgS{sub 3}] triangles.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Development of random geometry capability in RMC code for explicit analysis of polytype particle/pebble - 18493

Monte Carlo method plays an important role in accurate simulation of High Temperature Gas-Cooled Reactors (HTR) and molten salt reactors, owing to its advantages of the flexible geometry modeling and the use of continuous-energy nuclear cross sections. For the innovative design of pebble bed, prism HTRs and molten salt reactors, there may be more than one kind of particles or pebbles in the system, such as the burnable poison particles, graphite pebbles or fuel pebbles with different enrichments. Different treatments have been used to deal with the double-heterogeneous geometry of these reactors. In some researches, the particle distributions in stochastic media are assumed the regular lattice, while in the others, the explicit packing methods such as Random Sequential Addition (RSA) and Discrete Element Method (DEM) are used, by generating the random coordinates of the particles/pebbles. However, traditional geometry with repeated structure has difficulties in explicit modeling polytype particle/pebble, due to the arbitrary packing fractions of different kinds of particles or pebbles. Although, packing methods such as Random Sequential Addition (RSA) and Discrete Element Method (DEM) could solve the polytype particle/pebble problems to some extent, but these methods are troublesome in geometry modeling and time consuming. In this paper, a new Random Universe Geometry method was developed and implemented in Monte Carlo code RMC, for explicit analysis of polytype particle/pebble in double heterogeneous geometry systems, such as HTRs and molten salt reactors. This method was applied to constructed mixed particles/pebbles problems and also simplified HTR-10 full core problem to test the feasibility, and the results show that the random geometry modeling can provide explicit packing fraction of different kinds of particles or pebbles. The results are also compared with that calculated by RSA method and regular structure, and agree quite well. This work would provide an effective tool for the innovative design of pebble bed, prism HTRs and molten salt reactors with polytype particles or pebbles using Monte Carlo method. (authors)

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

Operational performance risk assessment in support of a supervisory control system - 251

A supervisory control system is being developed for multiunit advanced small modular reactors to minimize human interventions during normal and abnormal operations. In the supervisory control system, control action decisions are made based on a probabilistic risk assessment that employs event trees and fault trees. Although traditional probabilistic risk assessment tools are implemented, their scope is extended to normal operations, and the application is reversed to assess the success of non-safety related systems and to enable continued operation of the plant. This extended probabilistic risk assessment approach is called operational performance risk assessment (OPRA). OPRA helps to identify available paths, combine control actions for maintaining plant conditions within operational limits, and to quantify the likelihood of success of these operational trajectories to optimize the selection of alternative actions without activating reactor protection system. In this paper, a case study of OPRA in a supervisory control system is demonstrated for the Advanced Liquid Metal Reactor (ALMR) Power Reactor Inherently Safe Module (PRISM) design, specifically the power conversion system. The scenario investigated involved a condition in which the feedwater control valve that was observed to be drifting to the closed position. Alternative plant configurations that would allow the plant to continue to operate at full or reduced power were identified using OPRA. Dynamic analyses were performed with a thermal-hydraulic model of the ALMR PRISM system using Modelica to evaluate the magnitude of safety margins. Successful recovery paths for the selected scenario were identified and quantified using the supervisory control system. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Adaptive Generation of Multimaterial Grids from imaging data for Biomedical Lagrangian Fluid-Structure Simulations

Spatial discretization of complex imaging-derived fluid-solid geometries, such as the cardiac environment, is a critical but often overlooked challenge in biomechanical computations. This is particularly true in problems with Lagrangian interfaces, where, the fluid and solid phases must match geometrically. For simplicity and better accuracy, it is also highly desirable for the two phases to share the same surface mesh at the interface between them. We outline a method for solving this problem, and illustrate the approach with a 3D fluid-solid mesh of the mouse heart. An MRI perfusion-fixed dataset of a mouse heart with 50μm isotropic resolution was semi-automatically segmented using a customized multimaterial connected-threshold approach that divided the volume into non-overlapping regions of blood, tissue and background. Subsequently, a multimaterial marching cubes algorithm was applied to the segmented data to produce two detailed, compatible isosurfaces, one for blood and one for tissue. Both isosurfaces were simultaneously smoothed with a multimaterial smoothing algorithm that exactly conserves the volume for each phase. Using these two isosurfaces, we developed and applied novel automated meshing algorithms to generate anisotropic hybrid meshes on arbitrary biological geometries with the number of layers and the desired element anisotropy for each phase as the only input parameters. Since our meshes adapt to the local feature sizes and include boundary layer prisms, they are more efficient and accurate than non-adaptive, isotropic meshes, and the fluid-structure interaction computations will tend to have relative error equilibrated over the whole mesh.

59 BASIC BIOLOGICAL SCIENCES↗

Transition Metal Phosphide Hydroprocessing Catalysts: A review

The diminishing quality of oil feedstocks coupled with increasingly more stringent environmental regulations limiting the content of sulfur in transportation fuels have given rise to a need for improved hydroprocessing technology. This review begins with a summary of the major improvements in hydrodesulfurization (HDS) and hydrodenitrogenation (HDN) catalysts and processes that have been reported in recent years. It then describes a new class of hydroprocessing catalysts, the transition metal phosphides, which have emerged as a promising group of high-activity, stable catalysts. The phosphides have physical properties resembling ceramics, so are strong and hard, yet retain electronic and magnetic properties similar to metals. Their crystal structures are based on trigonal prisms, yet they do not form layered structures like the sulfides. They display excellent performance in HDS and HDN, with the most active phosphide, Ni{sub 2}P, having activity surpassing that of promoted sulfides on the basis of sites titrated by chemisorption (CO for the phosphides, O{sub 2} for the sulfides). In the HDS of difficult heteroaromatics like 4,6-dimethyldibenzothiophene Ni{sub 2}P operates by the hydrogenation pathway, while in the HDN of substituted nitrogen compounds like 2-methylpiperidine it carries out nucleophilic substitution. The active sites for hydrogenation in Ni{sub 2}P have a square pyramidal geometry, while those for direct hydrodesulfurization have a tetrahedral geometry. Overall, Ni{sub 2}P is a promising catalyst for deep HDS in the presence of nitrogen and aromatic compounds.

04 OIL SHALES AND TAR SANDS↗

Multiscale modeling of twinning and detwinning behavior of HCP polycrystals

A multiscale scheme is presented here to capture the twinning and detwinning mechanisms during cyclic loading of HCP polycrystals. In the current framework, the crystal plasticity finite element (CPFE) method is employed at the microstructural scale. The response of twinned regions at a material point is calculated using a novel homogenization scheme via a Taylor-type model. The homogenized behavior is then used in the CPFE to obtain the response of a polycrystal. An efficient rate-independent crystal plasticity model that has been incorporated into the open source PRISMS-Plasticity software is introduced here to capture the response of the twinned region. Accordingly, the corresponding algorithmic tangent modulus is derived. Finally, this multiscale scheme is validated against data available for the cyclic response of Mg alloy ZK60A. The results show that the multiscale model can capture the key elements of the sample response observed during the experiment.

36 MATERIALS SCIENCE↗

Deformation twinning and detwinning in extruded Mg-4Al: In-situ experiment and crystal plasticity simulation

Deformation twinning and detwinning in extruded Mg-4Al were investigated using in-situ SEM-DIC experiments and crystal plasticity finite element (CPFE) simulation. In this study, the in-situ SEM-DIC method was used to provide a unique set of data including twin/detwin characteristics and twin area fraction in addition to strain maps. A statistical analysis of the activation of twin variants and twin area fraction during both twinning and detwinning was conducted. A strong correlation was found between twin growth/shrinkage and the Schmid Factor (SF) for individual twin variants Higher twin SF during loading and unloading led to higher twin growth and shrinkage, respectively. However, after the applied compressive strain was removed, the pattern of the twin area fractions of the residual twin variants versus their nominal SFs did not follow the trend observed at the maximum compressive strain. Using a systematic methodology and an advanced twin/detwin model, the PRISMS-Plasticity CPFE simulation was calibrated using experimentally determined stress versus strain and twin area fraction versus strain information. A comprehensive evaluation of the CPFE model was conducted to determine its ability to capture the statistics of twin variants activation and twin area fraction. CPFE accurately captured the statistical aspects of both twinning and detwinning. Finally, it also predicted the first dominant twin variant for 47.5% of the grains and at least one of the two dominant twin variants for 80% of the grains at maximum compressive strain.

36 MATERIALS SCIENCE↗

Structure-Optical Property Correlations of Arsenic Sulfide Glasses in Visible, Infrared, and Sub-millimeter Regions

Optical properties and structural aspects of AsxS100-x glasses from visible to terahertz wavelengths were explored. A series of annealed, bulk AsxS100-x glasses (x = 30 to 42) were made and their refractive indices determined at terahertz, infrared, and visible frequencies using a combination of a quasi-optical backwards wave oscillator spectrometer for terahertz measurements and a prism coupler for visible and infrared measurements. It was found that refractive index at all frequencies increases with arsenic composition up to 40 atomic % arsenic then decreases with additional arsenic. Structure in x-ray diffraction patterns support the notion of a minimum volume at 40 atomic %, while the average covalent coordination number indicates the rigidity percolation threshold is reached there. At As concentrations > 40 atomic %, the network becomes over-constrained, the molar volume increases.

36 MATERIALS SCIENCE↗

Phase diagram, crystal chemistry and thermoelectric properties of compounds in the Ca-Co-Zn-O system

In the Ca-Co-Zn-O system, we have determined the tie-line relationships and the thermoelectric properties, solid solution limits, and structures of two low-dimensional cobaltite series, Ca 3 (Co, Zn) 4 O 9-z and Ca 3 (Co,Zn) 2 O 6-z at 885 ºC in air. In Ca 3 (Co,Zn) 4 O 9-z , which has a misfit layered structure, Zn was found to substitute in the Co site to a limit of Ca 3 (Co 3.8 Zn 0.2 )O 9-z . The compound Ca 3 (Co,Zn) 2 O 6-z (n=1 member of the homologous series, Ca n+2 (Co,Zn)n(Co,Zn)'O 3n+3-z ) consists of one-dimensional parallel (Co,Zn) 2 O 6 6- chains that are built from successive alternating face-sharing (Co,Zn)O 6 trigonal prisms and 'n' units of (Co,Zn)O 6 octahedra along the hexagonal c-axis. Zn substitutes in the Co site of Ca 3 Co 2 O 6 to a small amount of approximately Ca 3 (Co 1.95 Zn 0.05 )O 6-z . In the ZnO-CoO z system, Zn substitutes in the tetrahedral Co site of Co 3 O 4 to the maximum amount of (Co 2.49 Zn 0.51 )O 4-z and Co substitutes in the Zn site of ZnO to (Zn 0.94 Co 0.06 )O. The crystal structures of (Co 2.7 Zn 0.3 )O 4-z , (Zn 0.94 Co 0.06 )O, and Ca 3 (Co 1.95 Zn 0.05 )O 6-z are described. Despite the Ca 3 (Co, Zn) 2 O 6-z series having reasonably high Seebeck coefficients and relatively low thermal conductivity, the electrical resistivity values of its members are too high to achieve high figure of merit, ZT.

36 MATERIALS SCIENCE↗

{sup 1}H and {sup 23}Na MAS NMR spectroscopy of cationic species in CO{sub 2} selective alkaline earth metal porous silicoaluminophosphates prepared via liquid and solid state ion exchange

The location of extraframework cations in Sr{sup 2+} and Ba{sup 2+} ion-exchanged SAPO-34 was estimated by means of {sup 1}H and {sup 23}Na MAS NMR spectroscopy and spectral deconvolution. Incorporation of the alkaline earth metal cations onto the SAPO framework was achieved via liquid state ion exchange, coupled partial detemplation/solid-state ion exchange, and combination of both techniques. MAS NMR revealed that the level of ion exchange was limited by the presence of protons and sodium cations near hexagonal prisms (site SI), which are relatively difficult to exchange with the alkaline earth metal due to steric and charge repulsion criteria. In addition, the presence of ammonium cations in the supercages facilitated the exchange of otherwise tenacious hydrogen as corroborated by unit cell compositional data as well as enhanced CO{sub 2} adsorption at low partial pressures. The extraframework ammonium species were produced from partial detemplation of the structure-directing agent employed for the SAPO-34 synthesis, tetraethylammonium. - Graphical abstract: MAS NMR was used to elucidate the position the cationic species in alkaline earth metal exchanged silicoaluminophosphates. These species played a significant role during the ion exchange process and, therefore, the materials ultimate CO{sub 2} adsorption performance. Highlights: Black-Right-Pointing-Pointer Location of extraframework Sr{sup 2+} or Ba{sup 2+} cations was estimated by means of {sup 1}H and {sup 23}Na MAS NMR. Black-Right-Pointing-Pointer Level of Sr{sup 2+} or Ba{sup 2+} ion exchange was limited by the presence of protons and sodium cations. Black-Right-Pointing-Pointer Presence of ammonium cations in the supercages facilitated the exchange. Black-Right-Pointing-Pointer Sr{sup 2+} and Ba{sup 2+} ion exchanged SAPOs are outstanding CO{sub 2} adsorbents.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

A compact electromagnetic neutron nutator for precise neutron spin manipulation

A superconducting electromagnetic nutator (EMN) capable of generating a magnetic field vector along an arbitrary direction on a 2D plane has been designed. Its performance in precisely manipulating the neutron polarization vector has been tested at the HB2-D polarized development beamline at the High Flux Isotope Reactor. Unlike mechanical nutators that require physical handling or motor-driven actuation to rotate the magnetic field, the magnitude and orientation of the magnetic field produced by the EMN can be controlled electromagnetically. Further, the compact design (~15 mm depth, not including cryogenic housing) of this device ensures ease of coupling within existing superconducting neutron spin manipulation devices, such as magnetic Wollaston prisms (MWP), resonant radio frequency (RF) flippers, spherical neutron polarimetry (SNP) devices, etc.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Module greenhouse with high efficiency of transformation of solar energy, utilizing active and passive glass optical rasters

Since the eighties of the 20th century, various types of linear glass rasters for architectural usage have been developed in the Czech Republic made by the continuous melting technology. The development was focused on two main groups of rasters - active rasters with linear Fresnel lenses in fixed installation and with movable photo-thermal and/or photo-thermal/photo-voltaic absorbers. The second group are passive rasters based on total reflection of rays on an optical prism. During the last years we have been working on their standardization, exact measuring of their optical and thermal-technical characteristics and on creation of a final product that could be applied in solar architecture. With the project supported by the Ministry of Environment of the Czech Republic we were able to build an experimental greenhouse using these active and passive optical glass rasters. The project followed the growing number of technical objectives. The concept of the greenhouse consisted of interdependence construction - structural design of the greenhouse with its technological equipment securing the required temperature and humidity conditions in the interior of the greenhouse. This article aims to show the merits of the proposed scheme and presents the results of the mathematical model in the TRNSYS environment through which we could predict the future energy balance carried out similar works, thus optimizing the investment and operating costs. In this article description of various technology applications for passive and active utilization of solar radiation is presented, as well as some results of short-term and long-term experiments, including evaluation of 1-year operation of the greenhouse from the energy and interior temperature viewpoints. A comparison of the calculated energy flows in the greenhouse to real measured values, for verification of the installed model is also involved. (author)

14 SOLAR ENERGY↗

The translational blocking of α5 and α6 integrin subunits affects migration and invasion, and increases sensitivity to carboplatin of SKOV-3 ovarian cancer cell line

Epithelial ovarian cancer is the most lethal gynecologic malignancy. Integrins, overexpressed in cancer, are involved in various processes that favor the development of the disease. This study focused on determining the degree of involvement of α5, α6 and β3 integrin subunits in the establishment/development of epithelial ovarian cancer (EOC), such as proliferation, migration, invasion, and response to carboplatin. The translation of the α5, α6 and β3 integrins was blocked using morpholines, generating morphant cells for these proteins, which were corroborated by immunofluorescence assays. WST-1 proliferation assay showed that silencing of α5, α6, and β3 integrins does not affect the survival of morphants. Wound healing and transwell chamber assays showed that blocking α5 and α6 integrins decrease, in lesser and greater level respectively, the migratory and the invasive capacity of SKOV-3 cells. Finally, blocking α5 and α6 integrins partially sensitized the cells response to carboplatin, while blocking integrin β3 generated resistance to this drug. Statistical analyses were performed with the GraphPad Prism 5.0 software employing one way and two-way ANOVA tests; data are shown as average±SD. Results suggest that α5 and α6 integrins could become good candidates for chemotherapy targets in EOC.

60 APPLIED LIFE SCIENCES↗

Quest for highly porous metal-metalloporphyrin framework based upon a custom-designed octatopic porphyrin ligand

A porous metal-metalloporphyrin framework, MMPF-2, has been constructed from a custom-designed octatopic porphyrin ligand, tetrakis(3,5-dicarboxyphenyl)porphine, that links a distorted cobalt trigonal prism secondary building unit. MMPF-2 possesses permanent microporosity with the highest surface area of 2037 mg 2 g -1 among reported porphyrin-based MOFs, and demonstrates a high uptake capcity of 170 cm 3 g -1 CO 2 at 273 K and 1 bar.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗