Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Optical resonators”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1985

Nd:YAG end pumped by semiconductor laser arrays for free space optical communications

Preliminary experimental results are reported for a diode-pumped Nd:YAG laser employing a tightly focused end-pump geometry. The resonator configuration is planoconcave, with the pumped end of the Nd:YAG rod being coated for high reflection at 1.06 microns. This geometry rectifies nearly all the inefficiencies plaguing side-pumped schemes. This laser is further considered as a candidate for optical communication over the deep space channel.

Sipes, D. L., Jr.↗
NASA NTRS1991

A double-stage injection-locked oscillator for optically fed phased array antennas

In an optically fed phased array antenna system, the microwave carrier signal is transmitted via a modulated lightwave to each active T/R (transmit/receive) module, where it must be converted back to the microwave domain. Currently, efficient optical-to-microwave conversion is extremely difficult, as the detected microwave signal is weak and noisy. A novel circuit, containing a high-gain/low-noise microwave injection-locked oscillator, has been developed to improve the interface between the optical and microwave components. The circuit utilizes two FETs and a dielectric resonator, which serves as a frequency-dependent feedback element. The circuit, designed to operate at about 8 GHz, provides significant amplitude and phase noise suppression. In addition, the circuit realization is compatible with MMIC technology.

Berceli, Tibor↗
NASA NTRS1992

Designing Birefringent Filters For Solid-State Lasers

Mathematical model enables design of filter assembly of birefringent plates as integral part of resonator cavity of tunable solid-state laser. Proper design treats polarization eigenstate of entire resonator as function of wavelength. Program includes software modules for variety of optical elements including Pockels cell, laser rod, quarter- and half-wave plates, Faraday rotator, and polarizers.

Monosmith, Bryan↗
NASA NTRS1992

Mode/Medium Instability in CO2 Laser

Report discribes theoretical study of model/medium instability (MMI) in CO2 laser. Purposes of study to extend, to small Fresnel numbers, previous study of MMI restricted to large Fresnel numbers and to study methods of previous studies, to suppress MMI. Method of primary interest involves replacement of hard edge output mirror in laser resonator with mirror, local reflectivity of which decreases with radial distance from optical axis according to Gaussian profile.

Webster, K. L.↗
NASA NTRS1991

Optical pathlength control in the nanometer regime on the JPL phase B interferometer testbed

This paper describes experimental research being performed at the Jet Propulsion Laboratory to develop and validate control concepts arising out of NASA's Control Structure Interaction program. The facility is meant to be a ground testbed with relevance to a broad class of future precision optical space systems. The objective of the experimental program is to investigate a multi-layer control approach to the maintenance of nanometer level optical pathlength control in the presence of external disturbances and multiple structural resonances. A brief overview of the experimental facility is presented. The control design methodology is discussed, and several experimental results are presented.

O'Neal, Michael C.↗
NASA NTRS1993

Real group velocity in a medium with dissipation

In order to clarify the role of the imaginary term Im(d(omega)/dk), the motion of a wave packet in a dissipative, homogeneous medium is examined. The integral representation of the packet is analyzed by means of a saddle-point method. It is shown that in a moving frame attached to its maximum the packet looks self-similar. A Gaussian packet keeps its Gaussian identity, as is typical for the case of a nondissipative medium. The central wave number of the packet slowly changes because of a different damping among the Fourier components. Simple 'ray-tracing equations' are derived to follow the packet centers in coordinate and Fourier spaces. The analysis is illustrated with a comparison to geometric optics, and with two applications: the case of a medium with some resonant damping (or growth) and the propagation of whistler waves in a collisional plasma.

Muschietti, L.↗
NASA NTRS1995

The polarization and ultraviolet spectrum of Markarian 231

Ultraviolet spectropolarimetry acquired with the Hubble Space Telescope (HST) of the peculiar Seyfert galaxy Mrk 231 is combined with new high-quality ground-based measurements to provide the first, nearly complete, record of its linear polarization from 1575 to 7900 A. The accompanying ultraviolet spectrum portrays the heavily extinguished emission-line spectrum of the active nucleus plus the emergence of a blue continuum shortward of approximately 2400 A. In addition, absorption features due to He I lambda 3188, Mg I lambda 2853, Mg II lambda 2798, and especially several resonance multiplets of Fe II are identified with a well-known optical absorption system blueshifted approximately 4600 km/s with respect to emission lines. The continuum is attributed to approximately 10(exp 5) hot, young stars surrounding the nucleus. This component dilutes the polarized nuclear light, implying that the intrinsic polarization of the active galactic nucleus (AGN) spectrum approaches 20% at 2800 A. The rapid decline in degree of polarization toward longer wavelengths is best explained by the strongly frequency-dependent scattering cross section of dust grains coupled with modest starlight dilution. Peculiar S-shaped inflections in both the degree and position angle of polarization through H alpha and other major emission lines are interpreted as effects of scattering from two regions offset in velocity by several hundred km/s. A third source of (weakly) polarized flux is required to explain a nearly 40 deg rotation in position angle between 3200 and 1800 A. The displaced absorption features, polarimetry, and optical/infrared properties of Mrk 231 all point to its classification as a low-ionization, or Mg II broad absorption line quasar, in which most, if not all, lines of sight to the active nucleus are heavily obscured by dust and low-ionization gas clouds.

Smith, Paul S.↗
NASA NTRS1995

Silicon Micromachined Sensor for Broadband Vibration Analysis

The development of a family of silicon based integrated vibration sensors capable of sensing mechanical resonances over a broad range of frequencies with minimal signal processing requirements is presented. Two basic general embodiments of the concept were designed and fabricated. The first design was structured around an array of cantilever beams and fabricated using the ARPA sponsored multi-user MEMS processing system (MUMPS) process at the Microelectronics Center of North Carolina (MCNC). As part of the design process for this first sensor, a comprehensive finite elements analysis of the resonant modes and stress distribution was performed using PATRAN. The dependence of strain distribution and resonant frequency response as a function of Young's modulus in the Poly-Si structural material was studied. Analytical models were also studied. In-house experimental characterization using optical interferometry techniques were performed under controlled low pressure conditions. A second design, intended to operate in a non-resonant mode and capable of broadband frequency response, was proposed and developed around the concept of a cantilever beam integrated with a feedback control loop to produce a null mode vibration sensor. A proprietary process was used to integrat a metal-oxide semiconductor (MOS) sensing device, with actuators and a cantilever beam, as part of a compatible process. Both devices, once incorporated as part of multifunction data acquisition and telemetry systems will constitute a useful system for NASA launch vibration monitoring operations. Satellite and other space structures can benefit from the sensor for mechanical condition monitoring functions.

Gutierrez, Adolfo↗
NASA NTRS2005

Multipurpose Fiber Injected-micro-spherical LIDAR System

A technological revolution is occurring in the field of fiber lasers. Over the past two years, the level of power has increased from approx. 100 watts to nearly 1 kilowatt. We are developing a novel fiber laser system, which is a satellite-based LIDAR transmitter of multi-lines. The system is made of a hollow fiber filled with micro-spheres doped with lasing materials. Each sphere has its inherent optical cavity, which makes the system a cavity free and in the same time, emits multi-laser lines for simultaneous multi-task operations. The system is also rugged, compact, lightweight, and durable. Our earlier studies on micro-spheres doped with different laser dyes demonstrated the emission of extremely fine laser lines of less than 3 A line-width, which are of interest for spectroscopic applications, sensing, imaging, and optical communications. Individual dye-doped micro-spheres demonstrated a lasing resonance peaks phenomenon in their fluorescence spectra of linear and nonlinear features that do not exist in the bulk dye solutions. Each individual micro-sphere acts as a laser system with inherent cavity, where the fluorescence line suffers multiple internal reflections within the micro-sphere and gains enough energy to become a laser line. Such resonance peaks are dependent on the sphere's morphology, size, shape, and its refractive index. These resonance peaks are named structural resonance, whispering modes or whispering gallery modes, creeping waves, circumferential waves, surfaces modes, and virtual modes. All of these names refer to the same phenomenon of morphology dependent resonance (MDR), which has already been described and predicted precisely by electromagnetic theory and Lorentz-Mie theory since 1908. The resonance peaks become more obvious when the particle size approaches and exceeds the wavelength of the laser used and the relative index of the particle is greater than that of the surrounding medium. Additional information is included in the original extended abstract.

Abdelayem, Hossin↗
NASA NTRS2004

Method Developed for Noninterference Measurement of Blade Damping

Although noninterference optical instrumentation has been previously used to monitor and measure rotor blade vibrations, it has not been used at the NASA Glenn Research Center for the determination of damping. This article describes such a measurement in Glenn's Spin Rig facility. The optical system was chosen because installation of the slip rig for this particular configuration was not feasible, ruling out strain gauge instrumentation. The shaft in this facility was suspended with two radial magnetic bearings, and the excitation was supplied to the bearings by a signal generator. For the first mode, the direction of excitation force was always perpendicular to the blade as described by Morrison. The preceding graph shows blade displacements, as measured by an optical probe during a frequency sweep designed to locate the first mode resonance. The resonance determines the frequency at which the shaft is excited. Because the sampling rate was fixed to only once per revolution with these transducers, and the first mode frequency was much larger than the rotational frequency, the data in this figure were undersampled with an apparent frequency that was only 1 Hz at the beginning of the sweep, about 14 Hz at the maximum amplitude, and about 20 Hz at the end of the sweep. The true excitation frequency varied during the sweep from 320 to 340 Hz, and the resonance occurred at 334 Hz. Damping is determined by applying a frequency burst to the shaft. Upon cessation of the burst, the blade undergoes free decay. The apparent damping is then obtained by a least squares fit of the theoretical cosine decay function through the experimental points. The following graph illustrates this procedure. Because of frequency aliasing, the apparent measured damping must be divided by the ratio of the true resonant frequency to the apparent measured frequency to obtain the true damping. Note that the contribution of the shaft vibration to the blade vibration could be neglected because it was shown that it is an order of magnitude smaller and that its decay is an order of magnitude faster.

Kurkov, Anatole P.↗
NASA NTRS2003

Photonic frequency synthesis and control with Whispering Gellery Mode microresonators

We report here on experimental and theorectical studies of electro-optical tunability of WGM's in high-Q monolithic lithium niobate resonators and applicability of such resonators for light modulation and filtering. Properties of an optoelectronic microwave oscillator (EOE) based on an WGM LiNbO3 resonator are discussed.

Whispering Gallery Modes↗
NASA NTRS1974

Mars physical parameters as determined from Mariner 9 observations of the natural satellites and Doppler tracking

Mariner 9 Doppler tracking data and television photographs of Deimos and Phobos were analyzed to determine the gravity field, mass, and spin-axis direction of Mars and the natural satellite orbits. The solutions agree with previously published results. Radio data consisted of an apoapsis state vector for each of revolutions 5-195 obtained from one-revolution fits of Doppler data. Optical data consisted of TV photographs of Phobos and Deimos taken between revolutions 25 and 221. A first-order analytical theory, extended to include dominant second-order resonance effects on the Mariner 9 orbit, was used to calculate the motion of the spacecraft, Deimos, and Phobos. The feasibility of combining radio and optical data in long-arc solutions for accurate determination of orbits and physical parameters is demonstrated. The analytical theory developed for the evolution of a highly eccentric orbit in shallow resonance is accurate to plus or minus 1 km in the apoapsis state vector of Mariner 9 over a period of 200 revolutions.

Born, G. H.↗
NASA NTRS1991

Resonance structures in Saturn's rings probed by radio occultation. I - Methods and examples

Individual and comparative analyses are conducted for 29 of the wavelike features revealed by optical depth profiles of Saturn's rings; of these, 18 are in Ring A, one is in Ring B, and 10 are in Ring C. Only 20 of these were identifiable with known resonances, and all eight of the unexplained wave features are in Ring C. For 14 weak density waves in Ring A, a linear density wave theory modeling of the waveform near resonance yields independent estimates of the surface mass density together with reliable estimates of resonance location.

Rosen, Paul A.↗
NASA NTRS2020

Microwave Photoelasticity: A Resonant Wavelength Approach Applied to PEEK Polymer

Every nondestructive testing (NDT) technique has its unique set of advantages and limitations. Currently, the only existing noncontact NDT method capable of measuring sub-surface stresses, in optically opaque materials, at near-real-time speeds and over large areas is Microwave Photoelasticity (MP). This paper presents a new MP approach, which correlates changes in resonant wavelengths to changes in stress. In addition to a theoretical outline of the approach, the design and operation of an instrument capable of conducting these measurements is described. Finally, the technique is demonstrated by conducting measurements on polyetheretherketone, commonly known as PEEK, polymer. Between the W-Band frequencies of 105 to 115 GHz, PEEK’s stress-optic-coefficient was determined to be of 𝐶𝐶 = −0.20 ± 0.02 1/GPa.

Schemmel, Peter J.↗
NASA NTRS2013

Sub-mm Scale Fiber Guided Deep/Vacuum Ultra-Violet Optical Source for Trapped Mercury Ion Clocks

We demonstrate the functionality of a mercury capillary lamp with a diameter in the sub-mm range and deep ultraviolet (DUV)/ vacuum ultraviolet (VUV) radiation delivery via an optical fiber integrated with the capillary. DUV spectrum control is observed by varying the fabrication parameters such as buffer gas type and pressure, capillary diameter, electrical resonator design, and temperature. We also show spectroscopic data of the 199Hg+ hyper-fine transition at 40.5GHz when applying the above fiber optical design. We present efforts toward micro-plasma generation in hollow-core photonic crystal fiber with related optical design and theoretical estimations. This new approach towards a more practical DUV optical interface could benefit trapped ion clock developments for future ultra-stable frequency reference and time-keeping applications.

lamps↗
NASA NTRS1976

Preliminary results from the Orbiting Solar Observatory 8 - Observations of optically thin lines

The University of Colorado spectrometer aboard OSO 8 has measured the high temperature C IV resonance lines (at 1548 and 1551 A) and the Si IV resonance lines (at 1393 and 1402 A) formed in the solar chromosphere-corona transition region. Preliminary results include studies of mean profiles, a comparison of cell and network profiles, and the behavior of the lines at the extreme solar limb.

Shine, R. A.↗
NASA NTRS1995

Dynamic processes in Be star atmospheres. 3: Rapid multiwavelength variability in gamma Cassiopeiae

A review of the characteristics of X-ray emission from gamma Cas suggests various weaknesses with conventional scenarios that invoke Be wind interactions with a putative binary companion. To explore whether this emission might arise instead from sporadic high-energy events on the Be star itself, we have examined the temporal behavior of Voyager 1 FUV spectra and He I lambda 6678 line profiles. The FUV continuum light curves show a continuous rapid variability with a range of greater than or = 0.2 mag over a timescale of approximately 1 hr. All indications are that this variability is real. The difference spectrum of the inferred fluctuating component is identical to the photospheric spectrum, ruling out an origin much hotter than the star's effective temperature. A histogram of flux differences formed from consecutive observations shows a flat-topped distribution out to 0.2 mag. This result bears a striking resemblance to histograms constructed from EXOSAT and Ginga data, suggesting that the X-ray and FUV variabilities could have a common origin. Evidence is also presented of rapid variability in optical spectral lines associated with the stars photosphere. Time series of difference profiles of the lambda 6678 line confirm the existence of migrating subfeatures reported by earlier studies. The comoving average of these profiles shows that these features have a shape resembling a symmetrical 'wave-packet'. Wave packets appear to be preceeded and rejuvenated by a sharp central absorption feature. We also report a transient emission feature in lambda 6678 that is similar to brief emissions once reported by Slettebak & Snow in UV resonance line profiles of Si IV and Mg II. We argue that the FUV and optical variability may find an explanation in terms of magnetic flares. Solar white-light flares offer a possible paradigm. However, problems remain with such explanations, in particular their high mean energy, frequency, and temperature.

Smith, Myron A.↗