Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Numerical Simulation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Numerical simulation of reconnection in an emerging magnetic flux region

Numerical solutions in two dimensions are presented for the resistive MHD equations of an initial boundary value problem, simulating reconnection between an emerging magnetic flux region and an overlying coronal magnetic field. This numerical model displays four main phases, which are interpreted in terms of (1) a slowly evolving quasi-steady phase during which most of the magnetic flux emerges, with approximate equilibrium between magnetic and pressure forces; (2) an impulsive phase in which either the reconnection or continuing emergence of the first phase comes to disrupt the equilibrium, and extensive acceleration occurs as the high pressure region within the emerging region drives the fluid upwards and outwards; (3) a second quasi-steady phase; and (4) a potential-static phase in which continuing reconnection, ohmic dissipation, and fluid transport through boundaries depletes the system of all currents and flows.

Forbes, T. G.↗

Direct numerical simulations of a spatially developing plane wake

In the present paper, direct numerical methods by which to simulate the spatially developing free shear flows in the transitional region are described and the numerical results of a spatially developing plane wake are presented. The incompressible time-dependent Navier-Stokes equations were solved using Pade finite difference approximations in the streamwise direction, a mapped pseudospectral Fourier method in the cross-stream direction, and a third-order compact Runge-Kutta scheme for time advancement. The unstable modes of the Orr-Sommerfeld equations were used to perturb the inlet of the wake. Statistical analyses were performed and some numerical results were compared with experimental measurements. When only the fundamental mode is forced, the energy spectra show amplification of the fundamental and its higher harmonics. In this case, unperturbed alternate vortices develop in the saturation region of the wake. The phase jitter around the fundamental frequency plays a critical role in generating vortices of random shape and spacing. Large- and small-scale distortions of the fundamental structure are observed. Pairing of vortices of the same sign is observed, as well as vortex coupling of vortices of the opposite sign.

Maekawa, Hiroshi↗

Numerical simulation of turbulent flows

Computational models of turbulence in incompressible Newtonian fluids governed by the Navier-Stokes equations are reviewed. The governing equations are presented, and both direct and large-eddy-simulations are examined. Resolution requirements and numerical techniques of spatial representation, definition of initial and boundary conditions, and time advancement are considered. Results of simulations of homogeneous turbulence in uniform shear, the evolution of a turbulent mixing layer, and turbulent channel flow are presented graphically and discussed.

Rogallo, R. S.↗

Numerical simulation of boundary layer excitation by surface heating/cooling

The concept of active control of growing disturbances in an unstable compressible flow by using time periodic, localized surface heating is studied numerically. The simulations are calculated by a fourth-order accurate solution of the compressible, laminar Navier-Stokes equations. Fourth-order accuracy is particularly important for this problem because the solution must be computed over many wavelengths. The numerical results demonstrate the growth of an initially small fluctuation into the nonlinear regime where a local breakdown into smaller scale disturbances can be observed. It is shown that periodic surface heating over a small strip can reduce the level of the fluctuation provided that the phase of the heating current is properly chosen.

Bayliss, A.↗

Numerical simulation of transonic flow over porous airfoils

A numerical study was made to examine the effect of a porous surface on the aerodynamic performance of a transonic airfoil. The pressure jump across the normal shock wave on the upper surface of the airfoil was reduced by making the surface below the shock porous. The weakened shock is preceded by an oblique shock at the upstream end of the porous surface where air is blown out of the cavity. The lambda shock structure shown in the numerical result qualitatively agrees with that observed in the wind tunnel. According to the present analysis, the porous airfoil has a smaller drag and a higher lift than the solid airfoil.

Chow, C.-Y.↗

Higher-Order Compact Schemes for Numerical Simulation of Incompressible Flows

A higher order accurate numerical procedure has been developed for solving incompressible Navier-Stokes equations for 2D or 3D fluid flow problems. It is based on low-storage Runge-Kutta schemes for temporal discretization and fourth and sixth order compact finite-difference schemes for spatial discretization. The particular difficulty of satisfying the divergence-free velocity field required in incompressible fluid flow is resolved by solving a Poisson equation for pressure. It is demonstrated that for consistent global accuracy, it is necessary to employ the same order of accuracy in the discretization of the Poisson equation. Special care is also required to achieve the formal temporal accuracy of the Runge-Kutta schemes. The accuracy of the present procedure is demonstrated by application to several pertinent benchmark problems.

Wilson, Robert V.↗

Implicit and Multigrid Method for Ideal Multigrid Convergence: Direct Numerical Simulation of Separated Flow Around NACA 0012 Airfoil

Numerical investigation of flow separation over a NACA 0012 airfoil at large angles of attack has been carried out. The numerical calculation is performed by solving the full Navier-Stokes equations in generalized curvilinear coordinates. The second-order LU-SGS implicit scheme is applied for time integration. This scheme requires no tridiagonal inversion and is capable of being completely vectorized, provided the corresponding Jacobian matrices are properly selected. A fourth-order centered compact scheme is used for spatial derivatives. In order to reduce numerical oscillation, a sixth-order implicit filter is employed. Non-reflecting boundary conditions are imposed at the far-field and outlet boundaries to avoid possible non-physical wave reflection. Complex flow separation and vortex shedding phenomenon have been observed and discussed.

Liu, Chao-Qun↗

Numerical simulation of boundary-layer excitation by surface heating/cooling

The concept of active control of growing disturbances in an unstable compressible flow by using time periodic, localized surface heating is studied numerically. The simulations are calculated by a fourth-order accurate solution of the compressible, laminar Navier-Stokes equations. Fourth-order accuracy is particularly important for this problem because the solution must be computed over many wavelengths. The numerical results demonstrate the growth of an initially small fluctuation into the nonlinear regime where a local breakdown into smaller scale disturbances can be observed. It is shown that periodic surface heating over a small strip can reduce the level of the fluctuation provided that the phase of the heating current is properly chosen.

Bayliss, A.↗

Tip vortices of wings in subsonic and transonic flow: A numerical simulation

Thin layer Navier-Stokes and Euler equations are numerically solved using a multi-block zonal approach to simulate the formation and roll up of tip vortices of wings in subsonic and transonic flows. Several wing planforms were considered to examine the influence of tip-cap shape, planform geometry and free stream Mach number on the formation process. A good definition of the formation and qualitative roll up of tip vortices was achieved.

Srinivasan, G. R.↗

Three-dimensional tomographic reconstruction of the flow around a revolving helicopter rotorblade - A numerical simulation

This paper discusses tomographic data acquisition and reconstruction procedures for determining the flow around a revolving helicopter rotor blade. The data acquisition procedure is simulated using, as a testbed, a numerical representation of the flow and projections through this known field are computed. An investigation has been made of: (1) the effect of the number of projections on the accuracy of the reconstruction and (2) the fidelity of the reconstruction when the region of intersection of all projections is smaller than the spatial extent of the flow.

Hesselink, L.↗

Numerical simulations of comets - Predictions for Comet Giacobini-Zinner

Simulations of Comet Giacobini-Zinner's interaction with solar wind are described and results are presented. The simulations are carried out via the numerical solution of the ideal MHD equations as an initial value problem in a uniform solar wind. The calculations are performed on a Cartesian mesh centered at the comet. Results reveal that the first significant modifications of the solar wind along the ISEE/ICE trajectory will occur 100,000 km from the solar wind comet axis.

Fedder, J. A.↗

Numerical simulation of the helium gas spin-up channel performance of the relativity gyroscope

The dependence of the spin-up system efficiency on each geometrical parameter of the spin-up channel and the exhaust passage of the Gravity Probe-B (GPB) is individually investigated. The spin-up model is coded into a computer program which simulates the spin-up process. Numerical results reveal optimal combinations of the geometrical parameters for the ultimate spin-up performance. Comparisons are also made between the numerical results and experimental data. The experimental leakage rate can only be reached when the gap between the channel lip and the rotor surface increases beyond physical limit. The computed rotating frequency is roughly twice as high as the measured ones although the spin-up torques fairly match.

Karr, Gerald R.↗

Numerical Simulation of Turbulent Jets with Rectangular Cross-Section

Three-dimensional turbulent jets with rectangular cross-section are simulated with a finite-difference numerical method. The full Navier-Stokes equations are solved at low Reynolds numbers, whereas at the high Reynolds numbers filtered forms of the equations are solved along with a sub-grid scale model to approximate effects of the unresolved scales. A 2-N storage, third-order Runge-Kutta scheme is used for temporal discretization and a fourth-order compact scheme is used for spatial discretization. Computations are performed for different inlet conditions which represent different types of jet forcing. The phenomenon of axis-switching is observed, and it is confirmed that this is based on self-induction of the vorticity field. Budgets of the mean streamwise velocity show that convection is balanced by gradients of the Reynolds stresses and the pressure.

Wilson, Robert V.↗

Numerical simulation of the circulation of the atmosphere of Titan

A three dimensional General Circulation Model (GCM) of Titan's atmosphere is described. Initial results obtained with an economical two dimensional (2D) axisymmetric version of the model presented a strong superrotation in the upper stratosphere. Because of this result, a more general numerical study of superrotation was started with a somewhat different version of the GCM. It appears that for a slowly rotating planet which strongly absorbs solar radiation, circulation is dominated by global equator to pole Hadley circulation and strong superrotation. The theoretical study of this superrotation is discussed. It is also shown that 2D simulations systemically lead to instabilities which make 2D models poorly adapted to numerical simulation of Titan's (or Venus) atmosphere.

Hourdin, F.↗

Numerical Simulation of Wake Vortices Measured During the Idaho Falls and Memphis Field Programs

A numerical large-eddy simulation model is under modification and testing for application to aircraft wake vortices. The model, having a meteorological framework, permits the interaction of wake vortices with environments characterized by crosswind shear, stratification, and humidity. As part of the validation process, model results are compared with measured field data from the 1990 Idaho Falls and the 1994-1995 Memphis field experiments. Cases are selected that represent different aircraft and a cross section of meteorological environments. Also included is one case with wake vortex generation in ground effect. The model simulations are initialized with the appropriate meteorological conditions and a post roll-up vortex system. No ambient turbulence is assumed in our initial set of experiments, although turbulence can be self generated by the interaction of the model wakes with the ground and environment.

Proctor, Fred H.↗