Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Morphological”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1980

The surface of Io - Geologic units, morphology, and tectonics

The geologic units, morphology and tectonics evident on a preliminary geological map obtained from best-resolution Voyager 1 images and a preliminary pictorial map of the surface of Io are discussed. Nine volcanic units are identified on the surface which are composed of mountain materials, intervent, layered and eroded layered plains, and wall and floor, pit crater flow, shield crater flow, fissure flow and crater cone units associated with volcanic vents, along with seven types of structural features. The cumulative volcanic crater size distribution of 170 Ionian vents with craters greater than 14 km is similar to that of impact craters on other solar system bodies, with a surplus of small craters and a preponderance of volcanic vents in the Io equatorial zone. The observed surface morphologies provide evidence for a mixture of silicates and sulfur as the dominant surface material. Lineaments and grabens are also apparent on the surface, in a common planetary grid pattern.

Schaber, G. G.↗
NASA NTRS1979

Convective and morphological instability in vapor crystal growth

Theoretical and experimental work on the fluid dynamics of physical vapor transport is reported. It is shown that diffusion in viscous interaction with container walls leads to concentration gradients normal to the main transport direction. Consequently any convection threshold is removed. This coupling with convective instabilities makes the theoretical interpretation of earthbound (anisotropic) morphological stability studies on vapor-solid interfaces intractable. Hence low-gravity experiments are suggested that will allow for the establishment of morphological stability criteria under diffusion controlled conditions.

Rosenberger, F.↗
NASA NTRS1980

Control of crater morphology by gravity and target type - Mars, earth, moon

The process involved in the formation of impact craters on solid planets and satellites in the solar system is thought to be essentially the same everywhere. However, the resulting landforms are not all alike. The possible reasons for the differences in crater morphology are investigated. The obtained results suggest that both gravitational acceleration and target characteristics have affected the morphology of impact craters across the solar system. Neither of these important influences alone can explain all of the many observations on craters. The relative importance of gravity and target type differs from planet to planet. Intraplanetary contrasts in crater shape which reflect differences in target materials appear to be large on earth, significant but minor on Mars and the moon, and minimal on Mercury. Whole-planet differences in crater shape between earth and the moon, on the other hand, seem to be entirely dependent on g.

Pike, R. J.↗
NASA NTRS1980

The geology and morphology of Ina

The lunar feature Ina, an unusual D-shaped depression, is located in Lacus Felicitatis north of Mare Vaporum. Attention was drawn to the feature because of its strange 'blistered' appearance. Using detailed topographic data available from the Lunar Topographic Orthophotomap (LTO) series, it is now possible to depict the morphology and structure of Ina and the surrounding region more accurately than was previously feasible. The maps employed in the study are 41C3 and 41C4 at 1:250,000 scale, and 41C3S1 (Ina) at 1:10,000 scale. Attention is given to the regional setting, and the morphologic characteristics and origins of features. It is concluded that Ina is an apparently unique volcanic feature. It rests on a dome displaying evidence of episodic extrusive activity. Its odd D-shape is probably related to a local fracture pattern, since the straight edge is aligned with other small lineaments in the area. Ina's floor exhibits several volcanic units.

Strain, P. L.↗
NASA NTRS1982

Impact cratering experiments in Bingham materials and the morphology of craters on Mars and Ganymede

Results from a series of laboratory impacts into clay slurry targets are compared with photographs of impact craters on Mars and Ganymede. The interior and ejecta lobe morphology of rampart-type craters, as well as the progression of crater forms seen with increasing diameter on both Mars and Ganymede, are equalitatively explained by a model for impact into Bingham materials. For increasing impact energies and constant target rheology, laboratory craters exhibit a morphologic progression from bowl-shaped forms that are typical of dry planetary surfaces to craters with ejecta flow lobes and decreasing interior relief, characteristic of more volatile-rich planets. A similar sequence is seen for uniform impact energy in slurries of decreasing yield strength. The planetary progressions are explained by assuming that volatile-rich or icy planetary surfaces behave locally in the same way as Bingham materials and produce ejecta slurries with yield strenghs and viscosities comparable to terrestrial debris flows. Hypothetical impact into Mars and Ganymede are compared, and it is concluded that less ejecta would be produced on Ganymede owing to its lower gravitational acceleration, surface temperature, and density of surface materials.

Fink, J. H.↗
NASA NTRS1982

Morphology of volcanoes

The effects of chemical composition of the lava, physical processes of volcanic formation, and lava flow lengths on the morphology of Earth volcanoes were investigated. Difficulties in investigating volcanic morphology are discussed.

Schuver, H. J.↗
NASA NTRS1982

Further morphological studies of QSOs

Results are presented of optical mapping of 29 QSOs, together with results of VLA observations of 16 of the optically observed objects. Principal results are that QSOs to z = 0.45 have extended nebulosity, the average ratio of nuclear to fuzz luminosity, corrected for resolution, is about 0.5, some 8 times higher than Seyfert I values, the average fuzz luminosity is -21.5, fainter than giant ellipticals, and fuzz morphology does not resemble E or S galaxies, but is very similar to Seyfert I's to similar luminosity limits. In some cases, indications of spiral structure are seen, and a large fraction of asymmetrical morphology is noted. In the QSO 0241 + 622, steep spectrum radio emission is found displaced from the central source exactly along the minor optical axis.

Hutchings, J. B.↗
NASA NTRS1982

Craters and basins on Ganymede and Callisto - Morphological indicators of crustal evolution

The morphologic characteristics of craters and palimpsests on Ganymede and Callisto are surveyed, and the crustal properties of these satellites and the evolution of the properties are studied. The morphology of bowl-shaped craters, smooth-floored craters, craters without central peaks, craters with central pits, chain craters on Callisto, the Gilgamesh and Western Equatorial Basins on Ganymede, crater palimpsests and penepalimpsests, multiring structures on Callisto, and the Galileo Regio rimmed furrow system on Ganymede are described individually. The crustal evolution is addressed by examining the development of the Galileo Regio system, the distribution of crater retention ages, the record of ray clusters, the thermal history of the lithosphere of Ganymede, and the origin of the central pits. It is suggested that as the lithosphere of each satellite cooled and thickened, crater retentivity spread as a wave from the polar regions and the antapex toward the apex; at any given location, progressively larger craters were retained with the passage of time.

Passey, Q. R.↗
NASA NTRS1983

Morphology of ductile metals eroded by a jet of spherical particles impinging at normal incidence

Scanning electron microscopy and energy-dispersive X-ray spectroscopy are used, together with surface profile measurements, in the present morphological study of the erosion of an aluminum alloy and copper by the normal impact of spherical glass erodent particles. The morphology of the damage pattern is a manifestation of the flow pattern of erodent particles, and yields insight into the mechanisms that may be active at different stages of erosion. The simultaneous appearance of radial cracks and concentric rings is reported, together with wave crests which contain an accumulation of metallic flakes. A preliminary analysis is advanced to explain the formation of the various damage patterns observed.

Veerabhadra Rao, P.↗
NASA NTRS1984

Friction and morphology of magnetic tapes in sliding contact with nickel-zinc ferrite

Friction and morphological studies were conducted with magnetic tapes containing a Ni-Zn ferrite hemispherical pin in laboratory air at a relative humidity of 40 percent and at 23 C. The results indicate that the binder plays a significant role in the friction properties, morphology, and microstructure of the tape. Comparisons were made with four binders: nitrocellulose; poly (vinyledene) chloride; cellulose acetate; and hydroxyl-terminated, low molecular weight polyester added to the base polymer, polyester-polyurethane. The coefficient of friction was lowest for the tape with the nitrocellulose binder and increased in the order hydroxylterminated, low molecular weight polyester resin; poly (vinyledene) chloride; and cellulose acetate. The degree of enclosure of the oxide particles by the binder was highest for hydroxyl-terminated, low molecular weight polyester and decreased in the order cellulose acetate, poly (vinyledene) chloride, and nitrocellulose. The nature of deformation of the tape was a factor in controlling friction. The coefficient of friction under elastic contact conditions was considerably lower than under conditions that produced plastic contacts.

Miyoshi, K.↗
NASA NTRS1984

Morphology of fresh craters on Ganymede and the origin of pedestal craters

Properties of the planetary surface and subsurface can affect the morphology of impact craters. A mechanism was proposed to explain pedestal craters and domed floors within fresh craters on Ganymede. Voyager 1 and 2 images with resolutions = to or 3.2 km/lp were examined and 523 fresh craters were identified. For each crater, the rim and ejecta diameters were measured, and the crater was characterized by ejecta class(es), interior features, floor morphology and target terrain. Of the craters examined, 97 show moderate to prominent doming of the crater floor; 340 craters have continuous ejecta which terminates in a scarp pedestal craters, of which 86 (25%) have a high albedo diffuse deposit beyond the pedestal.

Horner, V. M.↗
NASA NTRS1983

The morphology and kinematics of the Cep IV star formation region

Rossano et al. (1980) have discussed the morphology and kinematics of Cep IV star formation region. The present investigation is concerned with H2CO observations which have been conducted to examine the relationship between the neutral and ionized gas in the Cep IV star formation region and to study the origin of the unusual kinematics and morphology of the stars, gas, and dust in this region. Six-cm H2CO observations were undertaken throughout a one half degree square area centered on the H II region W1. In addition, VLA observations of the Cep IV region at 6 and 20 cm were also performed. The neutral gas in the vicinity of W1 is found to be located in clouds having velocities of -13, -7, and 1 km/s. The gas at - 7 km/s appears to be undisturbed gas from the original dark cloud complex.

Grayzeck, E. J.↗
NASA NTRS1984

Morphological changes of gamma prime precipitates in nickel-base superalloy single crystals

Changes in the morphology of the gamma prime precipitate were examined during tensile creep at temperatures between 927 and 1038 C in 001-oriented single crystals of a Ni-Al-Mo-Ta superalloy. In this alloy, which has a large negative misfit of -0.80%, the gamma prime particles link together during creep to form platelets, or rafts, which are aligned with their broad faces perpendicular to the applied tensile axis. The dimensions of the gamma and gamma prime phases were measured as directional coarsening developed in an attempt to trace the changing morphology under various stress levels. In addition, the effects of initial microstructure, as well as slight compositional variations, were related to raft development and creep properties. The results showed that directional coarsening of gamma prime began during primary creep, and under certain conditions, continued to develop after the onset of steady-state creep. The length of the rafts increased linearly with time up to a plateau region. The thickness of the rafts, however, remained equal to the initial gamma prime size at least up through the onset of tertiary creep; this is a clear indication of the stability of the finely-spaced gamma-gamma prime lamellar structure. It was found that the single crystals with the finest gamma prime size exhibited the longest creep lives, because the resultant rafted structure had a larger number of gamma-gamma prime interfaces per unit volume of material.

Mackay, R. A.↗
NASA NTRS1984

Morphological stability in the presence of fluid flow in the melt

Recent experiments have shown that the presence of a vertical buoyancy-driven flow adjacent to an initially cylindrical crystal-melt interface may produce a time-dependent helical deformation of the interface, with a rotation period ranging from several minutes to many hours, depending upon the width of the melt. The temperature distribution is such that the interface is expected to be morphologically stable in the absence of fluid flow. A linear stability analysis reveals that the instability is due to a coupling between a basic hydrodynamic instability in the buoyant flow and the deformable boundary separating the two phases. The crystal-melt interface lowers the critical Grashof number of an analogous rigid-walled system by an order of magnitude for succinonitrile with a Prandtl number P = 22.8; furthermore, the hydrodynamic mode that is actually destabilized by the interface is not the least stable mode in the rigid-walled system for P = 22.8. The results show that the instability may be regarded either as a rather large alteration of a basic hydrodynamic instability by the crystal-melt interface, or as a significant modification of the morphological stability of the interface by the presence of the buoyant flow.

Mcfadden, G. B.↗
NASA NTRS1985

Morphological Stability and Fluid Dynamics of Vapor Crystal Growth

A fundamental understanding of the conditions under which crystals can retain morphological stability, i.e., shape stability of the advancing interface, during growth from vapors was studied. Morphological stability (MS) is a necessary condition for the growth of homogeneous single crystals required for numerous device applications. For crystallization from melts, the MS concepts are well developed and are essentially based on heat and mass transfer conditions about the advancing interface. For crystallization from vapors, the MS requirements are more complex and not well understood. The added complexity arises from the fact that anisotropies in interfacial kinetics are typically stronger in crystallization from vapors than from melts. These pronounced anisotropies root in the distinctly lower atomic roughness of most vapor-solid interfaces.

Rosenberger, F.↗
NASA NTRS1985

Morphology of human embryonic kidney cells in culture after space flight

The ability of human embyronic kidney cells to differentiate into small epithelioid, large epithelioid, domed, and fenestrated morphological cell types following space flight is examined. Kidney cells exposed to 1 day at 1 g, then 1 day in orbit, and a 12 minute passage through the electrophoretic separator are compared with control cultures. The data reveal that 70 percent of small epithelioid, 16 percent of large epithelioid, 9 percent of dome-forming, and 5 percent of fenestrated cells formed in the space exposed cells; the distributions correlate well with control data. The formation of domed cells from cells cultured from low electrophoretic mobility fractions and small epithelioid cells from high mobility fractions is unaffected by space flight conditions. It is concluded that storage under microgravity conditions does not influence the morphological differentiation of human embryonic kidney cells in low-passage culture.

Todd, P.↗
NASA NTRS1985

Morphological and physical characteristics of the Virgo Cluster - First results from the Las Campanas photographic survey

Preliminary results are presented of a photographic survey of the Virgo cluster to the faintest convenient limit of the Las Campanas du Pont 2.5 m reflector, performed in order to study the complexity of both the surface and velocity distributions within the central 6 degree radius region. The survey is described and the resulting Catalog is discussed, and the frequency of galaxy types found and listed in the Catalog is described. The physical properties of the dwarfs are summarized, and luminosity functions are given separately for each morphological type. The progressive change of (MBT) faintward along the morphological sequence from Sc I through Sm and Im types is shown, leading to a calibration of the de Vaucouleurs Lambda luminosity index and a determination of its intrinsic dispersion. The preliminary results on the distribution of galaxies of all types in the two principal subclustering regions found are summarized, and the velocity distributions over the face of the 6 degree core are discussed for the various galaxy types.

Sandage, A.↗
NASA NTRS1987

Crater morphology and morphometry on the Uranian satellites

Fresh craters on the icy Uranian satellites exhibit a range of morphologies similar to craters on the icy satellites of Jupiter and Saturn. The general structural features found in the craters are described. Estimates of transition diameters from simple to complex crater morphologies are given for the five large Uranian satellites and 1985U1, and plotted with transition diameters on other bodies against surface gravity. Possible large-scale impacts are discussed.

Croft, Steven K.↗