Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Mixture experiment”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Controlled dust formation in pulsed rf plasmas

This paper deals with the formation of nanoparticles in a pulsed discharge. Experiments are performed in a capacitively coupled discharge operated in a mixture of argon and acetylene. The paper focuses especially on the influence of the pulse frequency on the dust formation. The experiments reveal the existence of a rather narrow frequency band that separates a frequency region with no dust formation from a frequency region where dust formation occurs. The decisive point in the observations is that a small change in the pulse frequency (from 700 to 725 Hz) is enough to induce or, respectively, suppress the formation of dust particles. The experimental results are discussed by means of a simple model that allows one to calculate the density of negative ions (C{sub 2}H{sup -}, C{sub 4}H{sup -}, etc.) as a function of the pulse frequency.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Enhancing $\phi$-sensitivity of ignition delay times through dilution of fuel-air mixture

The high $\phi$-sensitivity (η) of ignition delay time (τ IDT ) is one of the desirable fuel properties for the high-load extension of advanced compression ignition engine. Recent studies revealed the effectiveness of a high dilution rate (x D ) for enhancing η at the engine-relevant conditions. This study aims to quantify the effect of dilution on the η of isooctane using a combined experiment-simulation approach. The ignition delay of the isooctane/air mixture was measured with an Advanced Fuel Ignition Delay Analyzer (AFIDA) over the temperature range of 623 - 923 K at 10 bar pressure with global $\phi$ = 0.3 - 0.6, with and without 28.6% of additional N 2 dilution. For precise evaluation of experimental η, the facility effect of the AFIDA experiment was characterized with three-dimensional computational fluid dynamics (3-D CFD) simulation. The temperature in the combustion chamber from 3-D CFD indicated a substantial temporal dependency, varying up to ~52 K by charge-cooling of fuel injection and heat transfer from the wall. We introduced the dimensionless number θ(t) for characterizing the temporal profile of chamber temperature. Consideration of the facility effect using θ(t) resulted in better agreement between the experimental ..eta.. and zero-dimensional (0-D) kinetics simulation. The refined η were then further utilized to quantify the effectiveness of dilution to η The extent of η enhancement with dilution strategy was maximized at the low-temperature chemistry regime, increasing η by 77% with a 28.6% dilution rate. Further analysis on the dilution effect was carried out using 0-D kinetics simulation, revealing the critical dimensionless numbers relevant to the effectiveness of dilution to η enhancement. Here, this study is the first experiment-simulation combined research to quantify the effect of dilution on η, facilitating the kinetics model refinement for better reproduction of $\phi$-sensitivity.

33 ADVANCED PROPULSION SYSTEMS↗

Modeling Isothermal Reduction of Iron Ore Pellet Using Finite Element Analysis Method: Experiments & Validation

Iron ore pellet reduction experiments were performed with pure hydrogen (H2) and mixtures with carbon monoxide (CO) at different ratios. For direct reduction processes that switch dynamically between reformed natural gas and hydrogen as the reductant, it is important to understand the effects of the transition on the oxide reduction kinetics to optimize the residence time of iron ore pellets in a shaft reactor. Hence, the reduction rates were studied by varying experimental parameters such as the temperature (800, 850 & 900 °C), reactant gas flow rate (100, 150 & 200 cm3/min), pellet size and composition of the reactant gas mixture. The rate of reduction was observed to increase with an increase in temperature and reactant gas flow rate, but it decreased with an increase in pellet size. SEM greyscale analysis was performed to analyze the porosity and phase composition of partially reduced pellets. The porosity of the pellets was observed to increase from 0.3 for unreacted pellet to 0.42 for a completely reduced pellet. Energy-dispersive X-ray spectroscopy (EDAX) analysis was performed to identify the phases observed in the SEM images. The fraction of iron phase was observed to increase from the shell region of the pellet to the core region with an increase in the degree of reduction. A 2D-axisymmetric numerical model was developed on COMSOL Multiphysics, and it was validated using the conversion (X) vs. time curves obtained from each experiment. The model was able to accurately predict the total time needed for the complete conversion of a single iron ore pellet for multiple experiments. Effects of changes in the porosity and tortuosity of the pellet on the model were also studied and the rate of reduction was observed to be sensitive to changes in both porosity and tortuosity. The SEM analysis and the model results show that tortuosity is higher for pellets reduced with H2 than for pellets reduced with H2-CO gas mixtures.

08 HYDROGEN↗

MIS Shelf-Life Final Report for Plutonium Oxide Item 1000089 (SSR136 and SSR136A) from Rocky Flats Peroxide Precipitation and Calcination Process

A plutonium dioxide material from the Material Identification and Surveillance (MIS) Program inventory has been studied to determine the gas generation and corrosion behavior in a storage environment. Sample 1000089 represents product-quality plutonium oxides produced in the Rocky Flats peroxide precipitation process currently stored in 3013 containers. This study followed over time the gas pressure and composition of a sample with nominally 0.5 wt% water in a sealed container with an internal volume scaled to 1/500th of the volume of a 3013 container. Gas compositions had been measured periodically over almost 13 years. The maximum observed gas pressure was 204 kPa and was related to a temperature excursion. The maximum observed gas pressure from gas generation was 126 kPa. The increase over the initial pressure of 86.7 kPa was due to the generation of hydrogen, oxygen, and nitrogen. Carbon dioxide, methane and carbon monoxide were minor components of the headspace gas. The material exhibited unusual behavior in that the atmosphere reached flammable levels of hydrogen and oxygen within the first 30 days and remained flammable for the duration of the experiment. It has been determined that the sample inside the reactor was a mixture of the AR material, material calcined at 800 °C, and material calcined at 950 °C. The experiment was terminated in 2012 and unloaded in 2016. A new reactor, SSR136A, was loaded with the original sample freshly calcined at 950 °C. The total pressure inside SSR136A remained close to the initial value of 93 kPa. The total pressure is composed of He (steady levels after the reloading) and hydrogen which is 10% of the reactor’s total pressure. Nitrogen and oxygen compose trace amounts of the reactor headspace. The internal components of SSR136 were inspected in 2021, five years after it was removed from the array. The inside surfaces of the inner bucket exposed to the original sample for 4,576 days had an etched appearance, and pit-like features were observed in the microscopic analysis. No corrosion was observed on the SSR136A inner bucket that held the freshly calcined sample that was exposed for 1,303 days.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Experimental Measurement of the Solid Particle Concentration in Geophysical Turbulent Gas-Particle Mixtures

Dilute gas-particle mixtures in which the particles are carried by the turbulent fluid are found in various geophysical contexts, from cold snow avalanches to hot pyroclastic density currents. Though previous studies suggest that such mixtures have maximum particle concentrations of a few volume percent, the dependence of this maximum concentration on the Reynolds number is unclear. We addressed this issue through laboratory experiments in a vertical pipe, where dilute gas-particle mixtures were created by injecting a turbulent air flow from below. Nearly monodisperse mixtures of glass beads of different grain sizes (77 to 1,550 μm) were used with varying bulk concentrations from 0.025 to 8 vol. %. To create quasi-static mixtures, the mean air velocity matched the terminal settling velocity for the grain sizes investigated. The maximum Reynolds numbers of the mixtures were ~104–106. The air pressure indicated full support of the particle weight at concentrations down to 0.025 vol. %. Above a critical particle concentration, at which all the particles were suspended, subsequent additional particles were not maintained in the mixture and led to the formation of clusters that settled downward in the pipe to form a dense fluidized bed. Maximum mean particle concentrations of the dilute mixtures increased from ~1 to ~2.8 vol. % and reached a plateau at increasing mixture Reynolds number. These results give insights into the maximum particle concentrations of geophysical turbulent gas-particle mixtures and may serve to constrain observations as well as the input and output data of models.

58 GEOSCIENCES↗

Modeling Solute Thermokinetics in LiCl-KCl Molten Salt for Nuclear Waste Separation (NEUP 10-418)

Recovery of actinides is an integral part of a closed nuclear fuel cycle. Pyrometallurgical nuclear fuel recycling processes have been developed in the past for recovering actinides from spent metallic and nitride fuels. The process is essentially to dissolve the spent fuel in a molten salt and then extract just the actinides for reuse in a reactor. Extraction is typically done through electrorefining, which involves electrochemical reduction of the dissolved actinides and plating onto a cathode. Knowledge of a number of basic thermokinetic properties of salts and salt-fuel mixtures is necessary for optimizing present and developing new approaches for pyrometallurgical waste processing. The properties of salt-fuel mixtures are presently being studied, but there are so many solutes and varying concentrations that direct experimental investigation is prohibitively time consuming and expensive (particularly for radioactive elements like Pu). Therefore, there is a need to reduce the number of required experiments through modeling of salt and salt-fuel mixture properties. This project will develop first-principles-based molecular modeling and simulation approaches to predict fundamental thermokinetic properties of dissolved actinides and fission products in molten salts. The focus of the proposed work is on property changes with higher concentrations (up to 5 mol%) of dissolved fuel components, where there is still very limited experimental data. The properties predicted with the modeling will be density, which is used to assess the amount of dissolved material in the salt; diffusion coefficients, which can control rates of material transport during separation; and solute activity, which determines total solubility and reduction potentials used during electrorefining. The work will focus on La, Sr, and U, which are chosen to include the important distinct categories of lanthanides, alkali earths, and actinides, respectively. Studies will be performed using LiCl-KCl salt at the eutectic composition (58 mol% LiCl, 42 mol% KCl), which is used for treating spent EBR-II fuel. The same process being used for EBRII fuel is currently being studied for widespread international implementation. The methods will focus on first-principles and first- principles derived interatomic potential based simulations, primarily using molecular dynamics. Results will be validated against existing literature and parallel ongoing experimental efforts. The simulation results will be of value for interpreting experimental results, validating analytical models, and for optimizing waste separation by potentially developing new salt configurations and operating conditions.

12 MANAGEMENT OF RADIOACTIVE AND NON-RADIOACTIVE W↗

Microkinetic Modeling of Lean NOx Trap Chemistry under Reducing Conditions

An elementary surface reaction mechanism describing the chemistry on the precious metal sites of a lean NOx trap is developed. Kinetic parameters for all of the reactions are found by fitting reactor simulations to an extensive experimental data base. Each experiment involves the steady flow of a reactant mixture through a monolith core sample under conditions designed to minimize NOx storage; in each case, the temperature is slowly ramped over a wide range in order to provide a large amount of data. A reaction mechanism involving 28 elementary steps is able to reproduce the results for 21 separate experimental runs quite well. The thermodynamic consistency of the mechanism is assured through the imposition of constraints on a well-defined subset of the rate parameters. It is found that the mechanism can occasionally lead to multiple steady state behavior due to the existence of parallel reduction pathways. DRIFTS experiments corroborate some of the key mechanistic steps.

54 ENVIRONMENTAL SCIENCES↗

Thermal decomposition of CH{sub 3}CHO studied by matrix infrared spectroscopy and photoionization mass spectroscopy

A heated SiC microtubular reactor has been used to decompose acetaldehyde and its isotopomers (CH{sub 3}CDO, CD{sub 3}CHO, and CD{sub 3}CDO). The pyrolysis experiments are carried out by passing a dilute mixture of acetaldehyde (roughly 0.1%-1%) entrained in a stream of a buffer gas (either He or Ar) through a heated SiC reactor that is 2-3 cm long and 1 mm in diameter. Typical pressures in the reactor are 50-200 Torr with the SiC tube wall temperature in the range 1200-1900 K. Characteristic residence times in the reactor are 50-200 {mu}s after which the gas mixture emerges as a skimmed molecular beam at a pressure of approximately 10 {mu}Torr. The reactor has been modified so that both pulsed and continuous modes can be studied, and results from both flow regimes are presented. Using various detection methods (Fourier transform infrared spectroscopy and both fixed wavelength and tunable synchrotron radiation photoionization mass spectrometry), a number of products formed at early pyrolysis times (roughly 100-200 {mu}s) are identified: H, H{sub 2}, CH{sub 3}, CO, CH{sub 2}=CHOH, HC{identical_to}CH, H{sub 2}O, and CH{sub 2}=C=O; trace quantities of other species are also observed in some of the experiments. Pyrolysis of rare isotopomers of acetaldehyde produces characteristic isotopic signatures in the reaction products, which offers insight into reaction mechanisms that occur in the reactor. In particular, while the principal unimolecular processes appear to be radical decomposition CH{sub 3}CHO (+M) {yields} CH{sub 3}+ H + CO and isomerization of acetaldehyde to vinyl alcohol, it appears that the CH{sub 2}CO and HCCH are formed (perhaps exclusively) by bimolecular reactions, especially those involving hydrogen atom attacks.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

An Integrated Multiscale Experimental-Numerical Analysis on Reconsolidation of Salt-Clay Mixture for Disposal of Heat-Generating Waste (Final NEUP Technical Report)

The overall purpose of this research is to improve understanding of THMC coupling effect on the reconsolidation of granular (or crushed) salt-clay mixture used for seal systems of shafts and drifts in salt repositories. This proposed work is partially motivated by the recent work on the Waste Isolation Pilot Plant (WIPP) that shows the promising sealing capability of clay-salt mixture compared to crushed salt. In particular, primary emphasis is to develop a fully integrated multiscale experiment-numerical study to determine and explain what leads to the superior sealing ability of the clay-salt mixture. These research activities are designed to seek further understanding of (1) why clay additives may enhance the fluid trapping and (2) whether this flow barrier effect may prevail under different combinations of temperature, confining pressure, deviatoric stress and other foreseeable environmental factors. If successful, this enhanced flow trapping ability of the seal provides significant improvement to the seal and repository performance and therefore make the repository safer in the long-term. The experiment component includes microstructural investigation and macroscopic tests on a reconsolidated salt-clay mixture. In the microstructural study, the goal is to (1) characterize microscopic distributions of distinct phases (e.g., clay, salt crystal boundaries, trapped brine, and pore) to examine the connectivity of the pore network inside the salt-clay mixture with different amounts of clay additive and moisture content and (2) analyze multiscale imaging data to reconstruct the polycrystalline microstructures for numerical simulations. Meanwhile, macroscopic tests are performed to analyze how clay alters the failure/creep mechanisms in the salt-clay mixture. Microscopic and macroscopic experimental observations will both be used to calibrate and validate a multiscale model that explicitly simulates the capillary and multiphase flow in the connected pores and the deformation due to the presence of intra-crystalline brine at the pore scale via a new polyhedral discrete element–lattice Boltzmann method (DEM-LBM) coupling model. The pore-scale simulations are homogenized via an upscaling procedure that converts pore-scale information (e.g. force exerted on grain boundary, sliding, pressure-solution) to continuum measures (e.g. Cauchy stress, Darcy’s flow) at each integration point in the macroscopic multiphase TMHC model. This multiscale scheme will allow coupling be- tween high-fidelity simulations of brine-salt-clay interaction and the macroscopic TMHC model. The multiscale model helps the understanding of how the trapped brine inclusion affects the pressure-solution mechanism with the presence of clay and moisture. This work brings new insight into the sealing capacity of salt-clay mixture under elevated temperature over a long period of time - a key to evaluating the potential of salt-clay mixture usage for salt repositories.

42 ENGINEERING↗

Microwave‐Assisted Synthesis of SrTiO 3 Nanocuboids without TiCl 4

Strontium titanate (STO) nanocuboids are a novel support for Pt nanoparticle catalysts (Pt/STO). The first of many steps in commercializing Pt/STO will be developing a scalable, environmentally sustainable, and cost‐effective STO nanocuboid synthesis. Herein, Sr–Ti–OH mixtures are synthesized from various Sr 2+ and Ti 4+ reagents and treated by convection‐ and microwave‐assisted heating to obtain STO nanoparticles. These experiments clarify how phase composition of the prehydrothermal Sr–Ti–OH mixture and choice of heating method affect final nanoparticle morphology. In Sr–Ti–OH mixtures synthesized with TiCl 4 , STO is the most stable phase and precipitates prior to heating, while titania sol–gels are the most stable phase when other Ti 4+ sources are used. STO nanocrystals always form when Sr–Ti–OH mixtures are treated by convection heating, though nanocuboids are only observed if STO precipitates from the Sr–Ti–OH mixture. Microwave‐assisted hydrothermal treatment more rapidly heats the precursor solution, and thus, STO nanocuboids can form from a variety of Sr–Ti–OH mixtures regardless of mixture composition. Two microwave syntheses of STO nanocuboids are reported: one which uses TiCl 4 as a Ti 4+ source, and another that uses titanium(IV) bis(ammonium lactato) dihydroxide ([NH 4 CH 3 CH(O)CO 2 ] 2 Ti(OH) 2 ), a water‐stable Ti 4+ complex.

Peczak, Ian L.↗

Effects of High Fuel Loading and CO2 Dilution on Oxy-Methane Ignition Inside a Shock Tube at High Pressure

Abstract Ignition delay times were measured for methane/O2 mixtures in a high dilution environment of either CO2 or N2 using a shock tube facility. Experiments were performed between 1044 K and 1356 K at pressures near 16 ± 2 atm. Test mixtures had an equivalence ratio of 1.0 with 16.67% CH4, 33.33% O2, and 50% diluent. Ignition delay times were measured using OH* emission and pressure time-histories. Data were compared to the predictions of two literature kinetic mechanisms (ARAMCO MECH 2.0 and GRI Mech 3.0). Most experiments showed inhomogeneous (mild) ignition which was deduced from five time-of-arrival pressure transducers placed along the driven section of the shock tube. Further analysis included determination of blast wave velocities and locations away from the end wall of initial detonations. Blast velocities were 60–80% of CJ-Detonation calculations. A narrow high temperature region within the range was identified as showing homogenous (strong) ignition which showed generally good agreement with model predictions. Model comparisons with mild ignition cases should not be used to further refine kinetic mechanisms, though at these conditions, insight was gained into various ignition behavior. To the best of our knowledge, we present first shock tube data during ignition of high fuel loading CH4/O2 mixtures diluted with CO2 and N2.

Energy & Fuels↗

Rouse mode analysis of chain relaxation in polymer nanocomposites

Large-scale molecular dynamics simulations are used to study the internal relaxations of chains in nanoparticle (NP)/polymer composites. We examine the Rouse modes of the chains, a quantity that is closest in spirit to the self-intermediate scattering function, typically determined in an (incoherent) inelastic neutron scattering experiment. Our simulations show that for weakly interacting mixtures of NPs and polymers, the effective monomeric relaxation rates are faster than in a neat melt when the NPs are smaller than the entanglement mesh size. In this case, the NPs serve to reduce both the monomeric friction and the entanglements in the polymer melt, as in the case of a polymer–solvent system. However, for NPs larger than half the entanglement mesh size, the effective monomer relaxation is essentially unaffected for low NP concentrations. Even in this case, we observe a strong reduction in chain entanglements for larger NP loadings. Furthermore, the role of NPs is to always reduce the number of entanglements, with this effect only becoming pronounced for small NPs or for high concentrations of large NPs. Our studies of the relaxation of single chains resonate with recent neutron spin echo (NSE) experiments, which deduce a similar entanglement dilution effect.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

Shatter Thresholds and Fragment Size Distributions of Deuterium–Neon Mixture Cryogenic Pellets for Tokamak Thermal Mitigation

Reliable mitigation is necessary to eliminate the detrimental effects of a disruption event in large high-current tokamaks such as ITER. To avoid serious damage to plasma-facing components during the thermal quench phase of a disruption, material is injected to radiate the plasma energy over the inner surface of the machine. The most promising method of material injection is a process known as shattered pellet injection (SPI). SPI utilizes cryogenic cooling to desublimate gas into the barrel of a pipe gun to form a solid pellet. High-pressure gas or a mechanical punch is used to dislodge the pellet and accelerate it into a bent tube to intentionally fracture it. Pellets made of a mixture of deuterium and neon are likely candidates for thermal mitigation. The survivability of these pellets throughout their flight path, before striking the shatter tube, is essential for reliable SPI operation. Experiments were conducted to determine intact speed limits for various mixtures. In this paper, we outline the details of brittle fracture theory and compare a theory-based model to experimental results from various mixtures of deuterium and neon pellets.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

High-Pressure Laminar Flame Speeds and Markstein Lengths of Syngas Flames Diluted in Carbon Dioxide and Helium

Abstract New laminar flame speed and burned-gas Markstein length data for H2–CO–O2–CO2–He mixtures have been measured from spherically expanding flames. Experiments were conducted at 10 atm and room temperature for H2:CO ratios ranging from 2:1 to 1:4 and for overall CO2 mole fractions from 0% to 30%. CO2 dilution had little effect on Markstein length, but CO2 dilutions of 10%, 20%, and 30% caused average reductions in flame speed of 47%, 73%, and 89%, respectively, regardless of H2:CO ratio. The study was designed to isolate the dilution effect of CO2 on flame speed, and a detailed analysis using the FCO2 method was used to show that the chemical-kinetic participation of CO2 was responsible for up to 20% of the reduction in flame speed. Hence, the majority (80% or more) of the reduction in flame speed due to CO2 is from the thermal effect. Accurate flame speed predictions were produced by five different chemical kinetics mechanisms for most conditions, with the slight exception of high-CO, high-CO2 mixtures. A thorough sensitivity analysis highlighted the larger effect of CO2 dilution on the important kinetics reactions than the effect of changing H2:CO. Sensitivity analysis also showed that the chain branching reaction H2O + O ⇌ OH + OH could be modified (albeit beyond its uncertainty) to achieve more accurate flame speed predictions, but also indicated that further improvement of flame speed modeling would require changes to many lesser reactions.

Engineering↗

FUEL 84: CO 2 /SO 2 sequestration via brine/bauxite residue mixture

A novel concept that can achieve neutralization of bauxite residue through reaction with acidic oil and gas field wastewater brines with subsequent carbonation with flue gas has been explored. Experiments were conducted to determine the ability of bauxite residue brine reactant mixtures to absorb and sequester CO 2 and SO 2 both from a concentrated stream and as components of a mixed flue gas. The use of bauxite residue/brine mixtures to capture and store CO 2 can serve to not only help mitigate the impact of anthropogenic CO 2 on global warming but also serve to achieve neutralization of the caustic industrial waste for safe storage.

01 COAL, LIGNITE, AND PEAT↗

Numerical Simulation of Thermodynamic Parameters of High-Porosity Copper

We propose that a modified equation of state be used for calculating the thermodynamically equilibrium TEC2 model for improving the reliability of description of thermodynamic parameters of shock loading of pure materials and heterogeneous mixtures of various porosities. For copper, the parameters of a thermally consistent equation of state have been determined. A reliable description of shock-wave loading of copper has been obtained using a small number of fitting parameters determined from the concordance with experimental data. Thermodynamic parameters have been simulated for copper with various porosities; the compression ratio and the temperature along the shock adiabat have been determined, and the value of heat capacity along the normal isobar has been calculated. The results of calculations are compared with available experimental results obtained by different authors.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Measurement of the gain of an optically pumped Xe{sub 2}Cl active medium

We have observed for the first time the gain in a Cl{sub 2} – Xe gas mixture optically excited by radiation of a XeCl laser (308 nm), which lead to the photoassociation Xe + Cl + hv → XeCl(B,C), accompanied by the formation of a Xe{sub 2}Cl{sup *} active medium in the recombination of XeCl(B,C) with Xe. The small-signal gain at a wavelength of 532 nm in a mixture of Cl{sub 2} (1 Torr) with Xe (2 atm) is measured to be (1.1 ± 0.3) × 10{sup −3} cm{sup −1} in an active volume measuring 0.5 × 1 × 80 cm for an excitation energy of 170 mJ in a pulse having a duration of 60 ns. Being recalculated to the maximum of the gain band of Xe{sub 2}Cl located at a wavelength of 504 nm, the gain amounted to (1.3 ± 0.3) × 10{sup −3} cm{sup −1}. The prospects of further development of the present method for exciting the Xe{sub 2}Cl{sup *} active medium are discussed.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗