SEARCH · Engineering Papers
Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.
Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.
The present invention provides a novel solution or route for metal phosphide (MPx) nanomaterials from the thermal decomposition of metal bis[bis(diisopropylphosphino)amide], M[N(PPri2)2]2, and/or single-source precursors. Synthetic routes to MPx nanomaterials may be used in energy applications including batteries, semiconductors, magnets, catalyst, lasers, inks, electrocatalysts and photodiodes.
This project takes advantage of the special capabilities of wide-bandgap (WBG) power semiconductor devices to develop innovative power electronics in the form of new current-source inverters (CSIs) that offer promising advantages over the dominant voltage-source inverter (VSI) topology. These CSIs, in turn, are extremely well-suited for integration into the housings of permanent magnet synchronous machines (PMSMs) to form integrated motor drives (IMDs). These new IMDs offer great promise for achieving major energy savings in a wide variety of applications that benefit from adjustable-speed control, including air conditioners, laundry appliances, industrial pumps/compressors, electric vehicles, and aerospace drives. WBG devices play a critical enabling role in these new IMDs because of their transformative features including much higher switching frequencies, lower losses, and compatibility with high operating temperatures. When incorporated into new CSI-based IMDs with PM machines, these WBG switches open the door to achieving major increases in power density, drive system efficiency, and fault tolerance, as well as substantial reductions in electromagnetic interference (EMI), manufacturing cost, and temperature-induced failures. The higher operating temperature capability of WBG devices compared to conventional silicon power devices is very appealing in IMD applications because the power electronics is mounted in close proximity to the motors which typically operate at temperatures well above the maximum limits of today’s silicon-based power electronics. This project has succeeded in designing, building, and testing multiple prototype versions of this CSI-IMD that have overcome many technical challenges in order to demonstrate the impressive performance improvements that can be achieved by the WBG-enabled CSI-IMD. The preliminary demo and bench-top versions of the current-source inverter developed during the first two years of the project were critical to laying the technical foundations for the 3 kW prototype CSI-IMD unit that was successfully built and tested during the third year. This prototype CSI-IMD unit was designed to fit within the housing envelope of the original permanent magnet (PM) synchronous machine in order to meet the demanding power density requirements that were set at the beginning of the project. All of the remaining performance objectives set for the prototype CSI-IMD unit including efficiency and electromagnetic interference (EMI) were also met. The last 18 months of the project were devoted to developing further enhancements of the WBG-enabled CSI-IMD technology that better prepare it for commercial production. More specifically, an upgraded version of the prototype CSI-IMD unit was developed that moved the power electronics into the same machine housing chamber as the motor, substantially raising the thermal demands on the power electronics. Tests with five different combinations of motor enclosure types and air cooling configurations were evaluated. Importantly, this work confirmed that the power electronics can deliver its full rated power and still operate well within its maximum temperature limits even for worst-case conditions when the housing is “totally-enclosed” without any openings for air to enter or exit the enclosure, and no blower/fan is provided to blow air over the outside surface of the enclosure. Reaching the full performance and energy-savings potential of this disruptive CSI-IMD motor drive technology is highly consistent with ARPA-E’s stated mission to “enhance the economic and energy security of the United States” while also supporting its commitment to “ensure that the U.S. maintains a technological lead in developing and deploying advanced energy technologies”. Follow-on projects are under way to explore the scalability of WBG-enabled CSI-IMD technology to 100 kW (peak) electric vehicle traction drives and fault-tolerant modular motor drives for future electrified aircraft propulsion applications.
Wire X-pinches (WXPs) have been studied comprehensively as fast (~1 ns pulse width), small (~1 μm) x-ray sources, created by twisting two or more fine wires into an “X” to produce a localized region of extreme magnetic pressure at the cross-point. Recently, two alternatives to the traditional WXP have arisen: the hybrid X-pinch (HXP), composed of two conical electrodes bridged by a thin wire or capillary, and the laser-cut foil X-pinch (LCXP), cut from a thin foil using a laser. We present a comparison of copper wire, hybrid, and laser-cut foil X-pinches on a single experimental platform: UC San Diego’s ~200 kA, 150 ns rise time GenASIS driver. All configurations produced 1–2 ns pulse width, ≤5 μm soft x-ray (Cu L-shell, ~1 keV) sources (resolutions diagnostically limited) with comparable fluxes. WXP results varied with linear mass and wire count, but consistently showed separate pinch and electron-beam-driven sources. LCXPs produced the brightest (~1 MW), smallest (≤5 μm) Cu K-shell sources, and spectroscopic data showed both H-like Cu K α lines indicative of source temperatures ≥2 keV, and cold K α (~8050 eV) characteristic of electron beam generated sources, which were not separately resolved on other diagnostics (within 1–2 ns and ≤200 μm). HXPs produced minimal K-shell emission and reliably single, bright, and small L-shell sources after modifications to shape the early current pulse through them. Benefits and drawbacks for each configuration are discussed to provide potential X-pinch users with the information required to choose the configuration best suited to their needs.
CHESS, chopper spectrometer examining small samples, is a planned direct geometry neutron chopper spectrometer designed to detect and analyze weak signals intrinsic to small cross sections (e.g., small mass, small magnetic moments, or neutron absorbing materials) in powders, liquids, and crystals. CHESS is optimized to enable transformative investigations of quantum materials, spin liquids, thermoelectrics, battery materials, and liquids. The broad dynamic range of the instrument is also well suited to study relaxation processes and excitations in soft and biological matter. The 15 Hz repetition rate of the Second Target Station at the Spallation Neutron Source enables the use of multiple incident energies within a single source pulse, greatly expanding the information gained in a single measurement. Furthermore, the high flux grants an enhanced capability for polarization analysis. This enables the separation of nuclear from magnetic scattering or coherent from incoherent scattering in hydrogenous materials over a large range of energy and momentum transfer. This paper presents optimizations and technical solutions to address the key requirements envisioned in the science case and the anticipated uses of this instrument.
The capability to produce high current, low loss, and extracted external ion beams presents an enabling technology for nuclear security, isotope production, and medical applications. We report on a novel, continuous-wave cyclotron for accelerating light ions with a charge-to-mass ratio of 1/2, which is designed for 1 mA maximum and 15 MeV/u energy. This article details the conceptual electromagnetic (EM) and engineering design including the 1.1 T sector magnets and 45 MHz, 200 kV radio frequency (RF) cavities. We discuss the cyclotron beam parameters with respect to potential commercial and industrial applications. The general concept and the accelerator’s layout are followed by a detailed EM design of magnets and RF cavities. Finally, practical engineering design considerations will be provided.
Linear plasma devices used to test plasma facing materials (PFMs) and components for fusion reactors are often suffering under the production of intrinsic impurities from the plasma source system. Most linear plasma devices use internal electrodes (hollow cathodes, reflex arc, or cascading arc), which typically are the source of the main impurities. The next-generation plasma generators use radio frequency (RF) plasma sources like helicons to avoid internal electrodes. However, high power operation of helicons has proven to result in impurity production due to the high rectified sheath voltages created. Depending on the plasma parameters and magnetic configuration, these impurities can be transported to the target and deposited there to unacceptable high levels. Here, in this contribution, the experimental results from Proto-MPEX are summarized, and the conclusions of the impurity source physics are given. Methods to reduce the impurity production, the impurity transport, and the net deposition on the target are presented. These methods to reduce the impurity production include Faraday screens to reduce the sheath voltage drop, high-Z refractory coatings to reduce the erosion yield, and wall conditioning methods. Methods to reduce the impurity transport include changes in the magnetic configuration as well as electron heating to change axial and radial temperature profiles. Preliminary results on the effectiveness of some of these methods are presented.
Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (10 10 -10 11 ), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two novel diagnostic tools to measure the distribution of trapped flux at the surface of SRF cavities. One is a magnetic field scanning system (MFSS) which uses cryogenic Hall probes and anisotropic magnetoresistance sensors that fit the contour of a 1.3 GHz cavity. The second setup is a stationary, combined magnetic and temperature mapping system which uses AMR sensors and carbon resistor temperature sensors, covering the surface of a 3 GHz SRF cavity. The MFSS system revealed a non-uniform distribution of trapped flux on the cavities' surface, dependent on the magnitude of the applied magnetic field during field-cooling below the critical temperature. The MFSS shows that magnetic field scanning as a function of the RF field indicates redistribution of trapped flux at some locations. About ~ 33% of hot-spots observed by temperature mapping during high power RF tests overlapped with the high B-field spots. Almost all high B-field spots observed after field-cool were found to be overlapped on grain boundaries. A clear correlation between the hot- spot formed after quench and local trapped flux was found, providing insight on the RF dissipation of trap vortices. The combined B&T map system showed that the T-map system is capable of detecting hot-spots and quench location on the surface of the 3 GHz SRF cavity. Different distribution of trapped flux was measured after different cool-down and residual B-field, but, no variation in magnetic field distribution was observed during quench, possibly due to magnetic sensors being far from the quench location.
Magnetic reconnection in relativistic plasmas is well established as a fast and efficient particle accelerator, capable of explaining the most dramatic astrophysical flares. With particle-in-cell simulations, we demonstrate the importance of nonideal fields for the early stages (“injection”) of particle acceleration. Most of the particles ending up with high energies (near or above the mean magnetic energy per particle) must have passed through nonideal regions where the assumptions of ideal magnetohydrodynamics are broken (i.e., regions with E > B or nonzero E ∥ = E ∙ B/B), whereas most of the particles that do not experience nonideal fields end up with Lorentz factors of order unity. So, injection by nonideal fields is a necessary prerequisite for further acceleration. Our results have important implications for the origin of nonthermal particles in high-energy astrophysical sources.
Superconducting radio-frequency (SRF) cavities are one of the fundamental building blocks of modern particle accelerators. To achieve the highest quality factors (10 10 –10 11 ), SRF cavities are operated at liquid helium temperatures. Magnetic flux trapped on the surface of SRF cavities during cool-down below the critical temperature is one of the leading sources of residual RF losses. Instruments capable of detecting the distribution of trapped flux on the cavity surface are in high demand in order to better understand its relation to the cavity material, surface treatments and environmental conditions. We have designed, developed, and commissioned two high-resolution diagnostic tools to measure the distribution of trapped flux at the surface of SRF cavities. One is a magnetic field scanning system, which uses cryogenic Hall probes and anisotropic magnetoresistance sensors that fit the contour of a 1.3 GHz cavity. This setup has a spatial resolution of ~ 13 μm in the azimuthal direction and ~ 1 cm along the cavity contour. The second setup is a stationary, combined magnetic and temperature mapping system, which uses anisotropic magnetoresistance sensors and carbon resistor temperature sensors, covering the surface of a 3 GHz SRF cavity. This system has a spatial resolution of 5 mm close to the iris and 11 mm at the equator. Initial results show a non-uniform distribution of trapped flux on the cavities’ surfaces, dependent on the magnitude of the applied magnetic field during field-cooling below the critical temperature.
Electric machine design has become an easier process with the availability of computers in recent decades. However, the interest in electric machine design among students has declined. University-level design courses must compete with courses perceived as more desirable by the potential job market. Hence, the power system engineers with this expertise are very few and are nearing retirement. Contrarily, renewable energy has been picking up in the past few decades. The indeterminacy and variation of renewable energy sources require a balancing mechanism to maintain the constant voltage and frequency of the grid. Adjustable-Speed Pumped-Storage Hydropower plants are considered the contender for future energy storage, providing large capacity and fast-acting response. Large-scale hydropower applications depend on the natural characteristics of each project site, making less expensive, off-the-shelf generators unfeasible. This work gives a shortcut to estimate the cost of constructing a permanent magnet generator for low-volume manufacturing.
High-speed flows of gas are the norm in astrophysics where exploding stars, winds from the regions around black holes and streams of galactic material create “supersonic flows”. As the flows collide, strong shock waves are formed where gas is compressed and heated. The regions behind these shock waves are of great interest to scientists. New stars can form in these shock regions in the context of galaxies. In the context of planets like our Earth, the shocks waves come from the interaction of the solar wind with our planets’ magnetic field causing Aurora and placing astronauts and satellites in jeopardy. Thus, understanding supersonic flows of magnetized plasmas is essential for progress in many fields of astronomy and space physics (relevant to planets and the Earth). Remarkably, we can also create these kinds of flows in the laboratory using Z-pinches and laser driven experiments that include magnetic fields. The exploration of these forms of “High Energy Density Physics” (HEDP) flows is also critical in order to achieve Inertial Confinement Fusion, which is a step towards developing a sustainable source of Fusion energy.
Accurately predicting redeposition is vital for high-Z plasma-facing component (PFC) survivability in magnetic confinement fusion. In this study, we categorize high-Z redeposition into three mechanisms: geometric-driven (prompt), sheath-driven (local), and scrape-off-layer-driven (far) redeposition. To investigate these mechanisms, we employ Monte Carlo transport codes to simulate azimuthally symmetric tungsten source erosion and redeposition in a tokamak. By iteratively analyzing critical parameters, we evaluate redeposition scaling for each mechanism. Specifically, we investigate the impact of magnetic-field-to-PFC pitch angle assumptions on PFC losses into the scrape-off layer. Our findings reveal significant pitch angle sensitivity due to an asymmetric prompt vs local redeposition trade-off. These results enhance our understanding of redeposition phenomena in fusion plasma environments.
Here, we assess the error in three treatments of a critical electron beam diagnostic for laser-plasma acceleration (LPA) experiments: a permanent magnet electron spectrometer. Since LPA electron spectrometers are often difficult to calibrate due to the scarcity of well-characterized, tunable electron beam sources in the appropriate energy range and the mechanical complexity of electron spectrometers, the standard of calibration is Hall probe measurements. We first compare the electron spectrometer performance between SIMION calculations and the Hall probe measurements. We find up to a 60% (<8%) error in determining the absolute energy for electrons below (above) 80 MeV when using the SIMION-modeled magnetic field vs the measured magnetic field due to SIMION overpredicting fringe field strength. The difference in spectrometer energy resolution is within ∼10% between the modeled and measured fields. We then assess a simple block model, which is commonly used. We find that the simple block model presented here sufficiently captures the predicted as-built spectrometer performance for any application provided that the user can tolerate uncertainties on absolute energy determination up to 5% and errors on energy resolution up to 1%.
Abstract In improper ferroelectrics, the spontaneous ordering is typically driven by a structural distortion or a magnetic spin alignment. The induced electric polarization is only a secondary effect. This dependence is a rich source for unusual phenomena and ferroelectric domain configurations for proper, polarization‐driven ferroelectrics. This study focuses on the polar domain structure and the hysteretic behavior at the ferroelectric phase transition in Ca 3 Mn 1.9 Ti 0.1 O 7 as a representative of the recently discovered hybrid improper ferroelectric class of multiferroics. Combining optical second harmonic generation and Raman spectroscopy gives access to the spontaneous structural distortion and the resulting improper electric polarization. This study shows that hybrid improper ferroelectrics contrast proper and improper ferroelectrics in several ways. Most intriguingly, adjacent ferroelectric domains favor head‐to‐head and tail‐to‐tail domain walls over charge‐neutral configurations. Furthermore, the phase transition occurs in an asymmetric fashion. The regime of phase coexistence of the nonpolar and polar phases shows a clear and abrupt upper temperature limit. In contrast, the coexistence toward low temperatures is best described as a fade‐out process, where 100‐nm‐sized islands of the nonpolar phase expand deep into the polar phase.
The modern approach to m-form global symmetries in a d-dimensional quantum field theory (QFT) entails specifying dimension d–m–1 topological generalized symmetry operators which non-trivially link with m-dimensional defect operators. In QFTs engineered via string constructions on a non-compact geometry X, these defects descend from branes wrapped on non-compact cycles which extend from a localized source / singularity to the boundary ∂X. The generalized symmetry operators which link with these defects arise from magnetic dual branes wrapped on cycles in ∂X. This provides a systematic way to read off various properties of such topological operators, including their worldvolume topological field theories, and the resulting fusion rules. We illustrate these general features in the context of 6D superconformal field theories, where we use the F-theory realization of these theories to read off the worldvolume theory on the generalized symmetry operators. Defects of dimension 3 which are charged under a suitable 3-form symmetry detect a non-invertible fusion rule for these operators. We also sketch how similar considerations hold for related systems.
One of the prominent effects of space weather is the formation of rapid geomagnetic field variations on Earth's surface driven by the magnetosphere-ionosphere system. These geomagnetic disturbances (GMDs) cause geomagnetically induced currents to run through ground conducting systems. In particular, localized GMDs (LGMDs) can be high amplitude and can have an effect on scale sizes less than 100 km, making them hazardous to power grids and difficult to predict. In this study, we examine the ability of the Space Weather Modeling Framework (SWMF) to reproduce LGMDs in the 7 September 2017 event using both existing and new metrics to quantify the success of the model against observation. We show that the high-resolution SWMF can reproduce LGMDs driven by ionospheric sources, but struggles to reproduce LGMDs driven by substorm effects. We calculate the global maxima of the magnetic fluctuations to show instances when the SWMF captures LGMDs at the correct times but not the correct locations. To remedy these shortcomings we suggest model developments that will directly impact the ability of the SWMF to reproduce LGMDs, most importantly updating the ionospheric conductance calculation from empirical to physics-based.
We report on the detection of the gamma-ray emission above 100 MeV from the solar flare of September 29, 2022, by Fermi LAT with simultaneous coverage in HXR by Solar Orbiter STIX. The Solar Orbiter-Earth separation was 178° at the time of the flare as seen from Earth, with Solar Orbiter observing the east limb. Based on STIX imaging, the flare was located 16° behind the eastern limb as seen from Earth. The STIX and GBM non-thermal emission and the LAT emission above 100 MeV all show similarly shaped time profiles, and the Fermi profiles peaked only 20 s after the STIX signal from the main flare site, setting this flare apart from all the other occulted flares observed by Fermi LAT. The radio spectral imaging based on the Nançay Radioheliograph and ORFEES spectrograph reveal geometries consistent with a magnetic structure that connects the parent active region behind the limb to the visible disk. We studied the basic characteristics of the gamma-ray time profile, in particular, the rise and decay times and the time delay between the gamma-ray and HXR peak fluxes. We compared the characteristics of this event with those of four Fermi LAT behind-the-limb flares and with an on-disk event and found that this event is strikingly similar to the impulsive on-disk flare. Based on multiwavelength observations, we find that the gamma-ray emission above 100 MeV originated from ions accelerated in the parent active region behind the limb and was transported to the visible disk via a large magnetic structure connected to the parent active region behind the limb. Our results strongly suggest that the source of the emission above 100 MeV from the September 29, 2022 flare cannot be the CME-driven shock.
Defects in wide-band-gap semiconductors are promising qubit candidates for quantum communication and computation. Epitaxially grown II-VI semiconductors are particularly promising host materials due to their direct band gap and potential for isotopic purification to a spin-zero nuclear background. Here, we show an alternative type of single photon emitter with potential electron spin qubits based on Cl impurities in ZnSe. We utilize a quantum well to increase the binding energies of donor emission and confirm single photon emission with short radiative lifetimes of 192 ps. Furthermore, we verify that the ground state of the Cl donor complex contains a single electron by observing two-electron-satellite emission, leaving the electron in higher orbital states. We also characterize the Zeeman splitting of the exciton transition by performing polarization-resolved magnetic spectroscopy on single emitters. Our results suggest single Cl impurities are suitable as a single photon source with a potential photonic interface.