Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “METHANATION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Coupled methane and NO x conversion on Pt + Pd/Al 2 O 3 monolith: Conversion enhancement through feed modulation and Mn 0.5 Fe 2.5 O 4 spinel addition

The performance of a dual-layer Pt-Pd/Al 2 O 3 washcoated monolith promoted by an Al 2 O 3 -supported Mn 0.5 Fe 2.5 O 4 spinel base layer was evaluated with the objective to develop a catalyst with a lower loading of Platinum group metal (PGM) for stoichiometric natural gas vehicle (NGV) emission control. Flow reactor results show that a combination of a lean/rich modulated feed and spinel addition gives enhanced methane and NO conversions compared to a steady-state feed having the same overall composition. Washcoated catalysts – PGM-only, spinel-only, PGM + spinel – were compared over a wide range of operating conditions. The results show a decrease in the methane conversion light-off temperature of up to 85 °C for an application-relevant feed (CH 4 + NO + H 2 + CO + O 2 + H 2 O + CO 2 ) while a moderate 40 °C decrease was observed for a simple feed (CH 4 + O 2 + H 2 O + CO 2 ). In the absence of spinel the modulation enhancement is negatively impacted at high methane conversion (> 80 %). The data show that the O 2 storage and release property of the spinel is needed to fully exploit the modulation enhancement. The mechanism responsible for the enhancement is linked to suppression of O 2 inhibition on the methane oxidation rate near the stoichiometric neutral point (λ = 1). Sufficiently fast cycling achieves a balance between a metallic and oxidic precious metal crystallites favorable for methane activation. The addition of spinel moves this balance closer to the λ = 1 feed, enabling a high oxidation efficiency with lower byproduct NH 3 selectivity. Enhancement in the NO conversion follows the methane conversion due to an easier NO reduction under the slightly rich of stoichiometric feed. Comparison of the PGM + spinel catalysts to PGM-only catalysts shows that the addition of spinel in combination with modulation can achieve the same activity with a lower PGM loading.

03 NATURAL GAS↗

Integrated Methane Monitoring Platform Extension, Volume I: Final Technical Report

The IMMPE project, DE-FE0032284, was to enhance methane monitoring technologies and their applications across various natural gas asset classes. The scope included deploying advanced methane detection and monitoring technologies to identify and mitigate fugitive methane emissions, measuring emission rates, and assessing impacts. The findings included the successful mitigation of identified emissions and quantification of emission rates. A key outcome was the development of a comprehensive template and summary of recommendations for methane emissions monitoring, which is replicable for both upstream and downstream applications. Furthermore, the project emphasized the importance of education by providing training opportunities for technicians and regulators, thereby fostering awareness and promoting the adoption of cost-effective methane emissions monitoring and management techniques.

02 PETROLEUM↗

Global Methane Budget 2000-2012 (V.1.0, issued June 2016 and V.1.1, issued December 2016)

After carbon dioxide (CO2), methane (CH4) is the second most important well-mixed greenhouse gas contributing to human-induced climate change. In a time-horizon of 100 years, CH4 has a Global Warming Potential (GWP-100) 28 times larger than CO2. The level of CH4 in the atmosphere is over 150% higher than pre-industrial times (cf. 1750), and it is responsible for 20% of the global warming produced by all well-mixed greenhouse gases. Methane is transformed into water vapor in the stratosphere. Methane also produces ozone in the troposphere, which is a pollutant with negative impacts on human health and ecosystems. The atmospheric life time of methane is 10 ± 2 years. [Copied from the Global Carbon Project, Global Methane Budget Highlights at http://www.globalcarbonproject.org/methanebudget/16/hl-compact.htmTo access the older version of this data package see: http://cdiac.ess-dive.lbl.gov/GCP/methanebudget/2016/

54 ENVIRONMENTAL SCIENCES↗

Persistence of bubble outlets in soft, methane-generating sediments

Sediments submerged beneath many inland waterways and shallow oceans emit methane, a potent greenhouse gas, but the magnitude of the methane flux to the atmosphere remains poorly constrained. In many settings, the majority of methane is released through bubbling, and the spatiotemporal heterogeneity of this ebullition both presents challenges for measurement and impacts bubble dissolution and atmospheric emissions. In this paper, we present laboratory-scale experiments of methane ebullition in a controlled incubation of reconstituted sediments from a eutrophic lake. Image analysis of a 0.14 m 2 sediment surface area allowed identification of individual bubble outlets and resolved their location to ~1 cm. While ebullition events were typically concentrated in bursts lasting ~2 min, some major outlets showed persistent activity over the scale of days and even months. This persistence was surprising given the previously observed ephemerality of spatial structure at the field scale. This persistence suggests that, at the centimeter scale, conduits are reopened as a result of a drop in tensile strength due to deformation of sediments by the rising bubbles. Finally, the mechanistic insight from this work sheds light on the spatiotemporal distribution of methane venting from organic-rich sediments and has important implications for bubble survival in the water column and associated biogeochemical pathways of methane.

58 GEOSCIENCES↗

Dry reforming of methane on a highly-active Ni-CeO 2 catalyst: Effects of metal-support interactions on C–H bond breaking

Ni-CeO 2 is a highly efficient, stable and non-expensive catalyst for methane dry reforming at relative low temperatures (700 K). The active phase of the catalyst consists of small nanoparticles of nickel dispersed on partially reduced ceria. Experiments of ambient pressure XPS indicate that methane dissociates on Ni/CeO 2 at temperatures as low as 300 K, generating CH x and CO x species on the surface of the catalyst. Strong metal–support interactions activate Ni for the dissociation of methane. The results of density-functional calculations show a drop in the effective barrier for methane activation from 0.9 eV on Ni(111) to only 0.15 eV on Ni/CeO 2–x (111). At 700 K, under methane dry reforming conditions, no signals for adsorbed CH x or C species are detected in the C1s XPS region. As a result, the reforming of methane proceeds in a clean and efficient way.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Methane Ebullition in Temperate Hydropower Reservoirs and Implications for US Policy on Greenhouse Gas Emissions

The United States is home to more than 87,000 dams, 2,198 of which are actively used for hydropower production. With the December 2015 consensus adoption of the United Nations Framework Convention on Climate Change’s Paris Agreement, it is imperative for the U.S. to accurately quantify greenhouse gas fluxes from its hydropower reservoirs. Methane ebullition, or methane bubbles originating from river or lake sediments, can account for nearly all of a reservoir’s methane emissions to the atmosphere. However, methane ebullition in hydropower reservoirs has been studied in only three temperate locations, none of which are in the United States. This study measures high ebullitive methane fluxes from two hydropower reservoirs in eastern Washington, synthesizes the known information about methane ebullition from tropical, boreal, and temperate hydropower reservoirs, and investigates the implications for U.S. hydropower management and growth.

54 ENVIRONMENTAL SCIENCES↗

Marginal Damage of Methane Emissions: Ozone Impacts on Agriculture

Methane directly contributes to air pollution, as an ozone precursor, and to climate change, generating physical and economic damages to different systems, namely agriculture, vegetation, energy, human health, or biodiversity. The methane-related damages to climate, measured as the Social Cost of Methane, and to human health have been analyzed by different studies and considered by government rulemaking in the last decades, but the ozone-related damages to crop revenues associated to methane emissions have not been incorporated to policy agenda. Using a combination of the Global Change Analysis Model and the TM5-FASST Scenario Screening Tool, we estimate that global marginal agricultural damages range from ~ 423 to 556 $2010/t-CH 4 , of which 98 $2010/t-CH 4 occur in the USA, which is the most affected region due to its role as a major crop producer, followed by China, EU-15, and India. These damages would represent 39–59% of the climate damages and 28–64% of the human health damages associated with methane emissions by previous studies. The marginal damages to crop revenues calculated in this study complement the damages from methane to climate and human health, and provides valuable information to be considered in future cost-benefits analyses.

54 ENVIRONMENTAL SCIENCES↗

A critical literature review of the advances in methane dehydroaromatization over multifunctional metal-promoted zeolite catalysts

We report the drastic rise in shale gas production has encouraged the quest for alternative uses of methane as a chemical feedstock in the manufacturing industry. While two-step syngas routes for methane valorization are deployed commercially, direct one-step routes for methane conversion are attracting much attention. As steam cracking installations have shifted from using oil-based naphtha to shale-based natural gas liquids, production of aromatics has dropped. Methane dehydroaromatization (MDA) is a one-step reaction capable of valorizing methane to hydrogen and benzene. Challenges with the MDA reaction are two-fold: the reaction is thermodynamically limited with low one-pass methane conversion and even the best catalytic systems, Mo/zeolites, suffer rapid deactivation from coking. A catalyst design strategy to improve stability is the use of multifunctional Mo-X/zeolite systems where X is a dopant capable of modulating the stability. In this paper we provide a complete overview of the main Mo-X/zeolite systems used in MDA and critically draw connections among the different types of dopants (X) employed, as a function of the role they play in the reaction/deactivation pathway. We have also dedicated a section to emerging trends with non-Mo based catalysts. The goal of this review article is to establish a basis that will facilitate the identification of useful multifunctional catalytic systems, and recognize gaps in the knowledge of these systems that deserve more attention. Improving MDA systems to the point to which they can be commercially deployed requires a multifaceted approach that combines optimization of the designs of both the catalyst and the reactor configuration. We therefore also provide a brief overview of the most recent advances in process intensification strategies employed with different reactor configurations.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Optimization of biogenic methane production from coal

Given continuously increasing global energy needs, diversified efforts have been made to find and exploit new natural gas resources. These include coalbed methane (CBM), which represents an important global, unconventional source of natural gas. Efforts have been underway for some time to more effectively generate methane in-situ in coal plays by introduction of nutrients and/or microbial consortia. However, much is still to be learned about the limitations and environmental conditions that support microbial growth and are conducive to biogenic methane production from coal. Here we evaluated environmental conditions that led to increased methane production from subbituminous coal by introducing a foreign methanogenic consortium that included Methanobacterium sp. Furthermore, we used a central composite design (CCD) to explore a broad range of operational conditions, examine the effects of the important environmental factors, such as temperature, pH and salt concentration, and query a feasible region of operation to maximize methane production from coal. An anticipated detrimental effect of NaCl concentration on methane production was observed for the consortium assessed. The range of feasible operational conditions comprised initial pH values between 4.2 and 6.8, temperatures between 23 °C and 37 °C, and NaCl concentrations between 3.7 mg/cm 3 and 9.0 mg/cm 3 . Coal biogasification was optimal for this consortium at an initial pH value of 5.5, at 30 °C, and at a NaCl concentration 3.7 mg/cm 3 (i.e., 145,165 ppm, which is 25.6 sft 3 /ton).

01 COAL, LIGNITE, AND PEAT↗

A formation water-based nutrient recipe for potentially increasing methane release from coal in situ

Biogasifying coal to methane represents an environmentally benign way to utilize the abundant and inexpensive coal resource. To increase methane yield from coal, numerous studies have investigated the approach of biostimulation through finding the best nutrient solutions to enhance microbial activities. Toward this end, however, almost all studies have adopted laboratory made medium that is tap water- or deionized and distilled water- based. As a matter of fact, this water is dramatically different from formation water in coal basins. Thus, in order to enhance methane release from coal in situ, this study aimed to design a formation water-based recipe. To accomplish this objective, the chemical and microbial compositions of the formation water collected from the San Juan basin were analyzed first. Equipped with this fundamental knowledge, a screening test was conducted to evaluate nine parameters to identify statistically significant ones affecting methane yield from coal. For those critical parameters, the optimal value for each was determined through response surface methodology. Finally, the predicted results by the models were verified by an experimental study adopting all optimum conditions. Here this study demonstrated that microbes capable of converting coal to methane were present at the San Juan basin and the developed recipe increased methane yield 24.3-fold compared to those without.

01 COAL, LIGNITE, AND PEAT↗

Investigation on the light alkanes aromatization over Zn and Ga modified HZSM-5 catalysts in the presence of methane

The catalytic co-aromatization of methane and paraffin-rich raffinate oil was investigated along with hexane, heptane and octane as its model compounds over zinc and gallium modified ZSM-5 zeolite catalysts. The benzene, toluene and xylene (BTX) components derived from light alkane aromatization were highly promoted with the assistance of methane. The co-existence of Zn and Ga metal species has a positive effect on the formation of BTX components, whereas the individual metal loaded catalyst resulted in the production of heavy aromatics, suggesting that zinc and gallium have a synergistic effect on the formation of BTX under the methane environment. When concerned with gaseous analysis, the introduced methane might interact with smaller intermediates and then transform into larger hydrocarbons. From the DRIFT observation, it was witnessed that the interaction between light alkane and methane occurred on the surface of the charged Zn-Ga/ZSM-5 catalyst. According to the comprehensive catalyst characterizations, the excellent catalytic performance may be closely associated with greatly dispersed metal species on the zeolite support, improved microporous characteristic, moderate Bronsted and increased Lewis acidic sites during the paraffin-rich liquid feedstock aromatization under methane environment. This research provides a promising pathway for the highly effective and profitable utilization of petrochemical resources and natural gas.

09 BIOMASS FUELS↗

Microwave-enhanced methane cracking for clean hydrogen production in shale rocks

Here, steam methane reforming (SMR) generates about 95% of hydrogen (H 2 ) in the U.S. using natural gas as a main feedstock. However, this technology also generates a large amount of carbon dioxide (CO 2 ), a major greenhouse gas causing global warming. Carbon capture and storage (CCS) technique is required, but the cost and safety of storing CO 2 underground are a concern. Here we propose a new approach using microwave/electromagnetic irradiation to produce clean hydrogen from unrecovered hydrocarbons within petroleum reservoirs. Solid carbon or CO 2 produced during this process will be simultaneously sequestrated underground without involving CCS. In this paper, we perform a series of experiments to investigate the in-situ hydrogen production from shale gas (methane) conversion by passing a methane stream through a packed shale rock sample heated by microwave. We found that methane conversion was significantly enhanced in the presence of Fe and Fe 3 O 4 particles as catalysts, with a conversion of 40.5% and 100% at reaction temperature of 500 °C and 600 °C, respectively. Methane conversion is promoted at a lower reaction temperature by the catalytic effect of minerals in shale. Additionally, the influences of catalysts, shale rock, and methane flow rate are characterized.

08 HYDROGEN↗

Activated carbon supported Ni, Fe, and bimetallic NiFe catalysts for CO x -free H 2 production by microwave methane pyrolysis

The goal of this study was to test the effect of metal-impregnated carbon-based catalysts on the conversion of methane to hydrogen gas and solid carbon using microwave reactor technology. Monometallic and bimetallic catalysts on activated carbon supports (Ni/AC, Fe/AC, Ni-Fe/AC) are compared during methane pyrolysis testing. Catalytic methane pyrolysis was carried out in a microwave reactor at reaction temperatures of 600 °C and 800 °C. For comparison, one of the catalysts (Ni-Fe/AC) was tested in a conventionally heated reactor at 800 °C. The prepared catalysts were characterized by X-ray diffraction (XRD), while post-reaction catalysts were characterized by XRD and SEM. During reaction testing, the monometallic Ni/AC catalyst exhibited the best catalytic activity (CH 4 conversion: 46.0 and H 2 yield: 46.9%) when reacted in the microwave reactor, however, it suffered from rapid deactivation from carbon deposition (carbon yield: 0.39 gC/g catalyst). The bimetallic Ni-Fe/AC catalyst was slightly less active (CH 4 conversion: 36.9 and H 2 yield: 40.5%) but it was more resistant to carbon formation (carbon yield: 0.27 gC/g catalyst) suggesting it may have greater long-term stability. The Ni-Fe/AC catalyst was also the most energy efficient as it required the least microwave power to maintain the 800 °C reaction temperature compared to the other catalysts tested. Methane conversion of the bimetallic Ni-Fe/AC at 800 °C under microwave irradiation was three times the conversion under conventional heating at the same reaction temperature. Finally, this work demonstrates the use of microwave-specific catalysts for catalytic methane pyrolysis in a microwave reactor, and can be used as a foundation for further methane pyrolysis process and catalyst optimization for CO x -free H 2 production.

08 HYDROGEN↗

Influence of ethylene and acetylene on the rate and reversibility of methane dehydroaromatization on Mo/H-ZSM-5 catalysts

Acetylene is identified as a key intermediate in methane dehydroaromatization (DHA) reactions present in concentrations O(1) Pascal. The rank of acetylene and other C 2 hydrocarbon intermediates is determined by conversion-selectivity profiles collected from 0.01-8% methane conversion varied by extent of “non-selective” deactivation of Mo/H-ZSM-5 catalysts. Ethane is shown to be the sole primary product of methane pyrolysis and is sequentially dehydrogenated to ethylene and acetylene – which aromatizes to benzene with rates similar to direct acetylene aromatization measured in the absence of methane. The influence of C-H cleavage and C-C coupling events to control the rate and reversibility of DHA is assessed by the degree of reversibility control, introduced here for the first time, and the degree of rate control. Here, the approach to equilibrium of the methane to benzene synthesis reaction is length averaged and affinity averaged by the degree of reversibility control of each intervening elementary step to rigorously calculate forward rates of benzene synthesis by use of De Donder relations. Forward rates are found to be invariant along the catalyst bed once the DHA network reaches a pseudo-steady state and methane, ethane, and ethylene form an equilibrated pool.

03 NATURAL GAS↗

Effect of carbon dioxide and nitrogen on the diffusivity of methane confined in nano-porous carbon aerogel

The microscopic diffusivity of methane (CH{sub 4}) confined in nano-porous carbon aerogel was investigated as a function of added carbon dioxide (CO{sub 2}) and nitrogen (N{sub 2}) pressure using quasi-elastic neutron scattering (QENS). In the range of the external pressure of 1-2.5 MPa, the self-diffusivity of methane was found to increase with CO{sub 2} pressure and remain practically unchanged in the N{sub 2} environment. Increasing mobility of methane with CO{sub 2} pressure suggests that the adsorbed CH4 molecules become gradually replaced by CO{sub 2} on the surface of carbon aerogel pores, whereas the presence of N{sub 2} does not induce the replacement. The molecular mobility of the methane, with or without added carbon dioxide and nitrogen, is described by the unrestricted diffusion model, which is characteristic of methane compressed in small pores. On the other hand, both nitrogen and carbon dioxide molecules in carbon aerogel, when studied alone, with no methane present, follow a jump diffusion process, characteristic of the molecular mobility in the densified adsorbed layers on the surface of the aerogel pores.

03 NATURAL GAS↗

Mitigation of methane emission from an old unlined landfill in Klintholm, Denmark using a passive biocover system

Highlights: • An innovative biocover system was constructed on a landfill cell to mitigate the methane emission. • The biocover system had a mitigation efficiently of typically 80%. • The system also worked efficiently at ambient temperatures below freezing. • A whole landfill emission measurement tool was required to document the biocover system efficiency. - Abstract: Methane generated at landfills contributes to global warming and can be mitigated by biocover systems relying on microbial methane oxidation. As part of a closure plan for an old unlined landfill without any gas management measures, an innovative biocover system was established. The system was designed based on a conceptual model of the gas emission patterns established through an initial baseline study. The study included construction of gas collection trenches along the slopes of the landfill where the majority of the methane emissions occurred. Local compost materials were tested as to their usefulness as bioactive methane oxidizing material and a suitable compost mixture was selected. Whole site methane emission quantifications based on combined tracer release and downwind measurements in combination with several local experimental activities (gas composition within biocover layers, flux chamber based emission measurements and logging of compost temperatures) proved that the biocover system had an average mitigation efficiency of approximately 80%. The study showed that the system also had a high efficiency during winter periods with temperatures below freezing. An economic analysis indicated that the mitigation costs of the biocover system were competitive to other existing greenhouse gas mitigation options.

29 ENERGY PLANNING, POLICY, AND ECONOMY↗

Free-Energy Landscapes and Surface Dynamics in Methane Activation on Ni(511) via Machine Learning and Enhanced Sampling

Methane activation on stepped Ni(511) surfaces involves the rearrangement of surface atoms as the chemical reaction proceeds. This process is particularly sensitive to temperature. Using machine-learned interatomic potentials (MLIPs) coupled with enhanced sampling techniques, we investigate the activation of methane under realistic operando conditions. Our analysis reveals that methane dissociation occurs predominantly at step-edge nickel atoms. As CH x (where x = 3 or 4) species bind to additional surface nickel atoms, their reduced mobility leads to entropic penalties that suppress certain configurations and transition states. This is reflected in the underlying free energy surfaces, where configurations such as methyl binding to hollow sites and activation routes involving two nickel atoms become unfavorable as temperature increases. At elevated temperatures, methane activation extends from step-edge sites to terrace regions because of reduced free-energy barriers and enhanced surface dynamics. By decomposing the free-energy into enthalpic and entropic contributions, we uncover temperature-dependent shifts in the preferences of methane for the relevant active sites and arrive at a detailed molecular picture of methane activation.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

The Kinetic Consequences of Water on Catalytic Methane Pyrolysis

Hydrogen production from biomass and natural gas has emerged as a prominent research area in response to the growing demand for energy from alternative sources that minimize CO 2 emissions. In this study, we investigate the impact of water, which is present in and generated from biomass-derived streams, on carbon nanotube (CNT) growth and hydrogen production during methane decomposition using Ni–Mo/MgO as a catalyst. We reveal here that the role of water on CNT growth is highly complex; its effect depends on the stage of growth at which the water is incorporated. When water is introduced at the beginning of methane decomposition ( t = 0 h), methane conversion rates are negatively impacted. We hypothesize that water inhibits the significant phase changes the Ni–Mo/MgO catalyst undergoes during catalyst carburization. In contrast, the incorporation of a small percentage of water after a stabilization period ( t = 3 h) results in methane conversion rate enhancements that scale with the introduced water partial pressure as water selectively reacts with amorphous carbon deposits that lead to catalyst deactivation, thus prolonging the lifetime of some of the most active sites. Moreover, water incorporation after stabilization significantly reduces the apparent activation energy. Density Functional Theory (DFT) calculations reveal that water preferentially interacts with carbon fragments on the catalyst surface to remove carbon deposits with a barrier lower than that required for methane activation, further supporting its role in cleaning active sites on the catalyst surface. Characterization of the resulting carbon nanotubes reveals the formation of more graphitic materials produced in the presence of water, highlighting the impact of water on nanotube properties. These results provide clarity toward the many ways in which water, or cofeeding of biomass-derived materials, may impact catalytic methane pyrolysis rates.

carbon nanotubes↗