Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “MAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Noninvasive measurements of spin transport properties of an antiferromagnetic insulator

Antiferromagnetic insulators (AFIs) are of substantial interest because of their potential in the development of next-generation spintronic devices. One major effort in this emerging field is to harness AFIs for long-range spin information communication and storage. Here, we report a noninvasive method to optically access the intrinsic spin transport properties of an archetypical AFI α-Fe 2 O 3 via nitrogen-vacancy (NV) quantum spin sensors. By NV relaxometry measurements, we successfully detect the frequency-dependent dynamic fluctuations of the spin density of α-Fe 2 O 3 along the Néel order parameter, from which an intrinsic spin diffusion constant of α-Fe 2 O 3 is experimentally measured in the absence of external spin biases. Our results highlight the significant opportunity offered by NV centers in diagnosing the underlying spin transport properties in a broad range of high-frequency magnetic materials such as two-dimensional magnets, spin liquids, and magnetic Weyl semimetals, which are challenging to access by the conventional measurement techniques.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis and behavior of bulk iron nitride soft magnets via high-pressure spark plasma sintering

Abstract In this study, dense bulk iron nitrides (Fe x N) were synthesized for the first time ever using spark plasma sintering (SPS) of Fe x N powders. The Fe 4 N phase of iron nitride in particular has significant potential to serve as a new soft magnetic material in both transformer and inductor cores and electrical machines. The density of SPSed Fe x N increased with SPS temperature and pressure. The microstructure of the consolidated bulk Fe x N was characterized with X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), and superconducting quantum interference device (SQUID) magnetometry. XRD revealed a primary phase of Fe 4 N with secondary phases of Fe 3 N and metallic iron. Finite element analysis (FEA) was also applied to investigate and explain localized heating and temperature distribution during SPS. The effects of processing on interface bonding formation and phase evolution were investigated and discussed in detail to provide insight into fundamental phenomena and microstructural evolution in SPSed Fe x N. Graphic abstract

36 MATERIALS SCIENCE↗

Electric Drive Technologies (FY19 Annual Progress Report)

This project is part of a multi-lab consortium that leverages U.S. research expertise and facilities at national labs and universities to significantly advance electric drive power density and reliability, while simultaneously reducing cost. The final objective of the consortium is to develop a 100 kW traction drive system that achieves 33 kW/L, has an operational life of 300,000 miles, and a cost of less than $\$6$/kW. One element of the system is a 100 kW inverter with a power density of 100 kW/L and a cost of $\$2.7$/kW. New materials such as widebandgap semiconductors, soft magnetic materials, and ceramic dielectrics, integrated using multi-objective cooptimization design techniques, will be utilized to achieve these program goals. This project focuses on a subset of the power electronics work within the consortium, specifically the design, fabrication, and evaluation of vertical GaN power devices suitable for automotive applications.

32 ENERGY CONSERVATION, CONSUMPTION, AND UTILIZATI↗

Basic Energy Sciences Roundtable: Opportunities for Quantum Computing in Chemical and Materials Sciences

Fundamental transformations in the basic logic of computing are few and far between. Since the invention of digital computers in the early 1940s, the logic underlying computation has remained the same, even as computing hardware evolved from vacuum tubes to silicon transistors. With the advent of quantum computation, a fundamental transformation is near. Quantum computation is based on a different type of logic: rather than being in one of the two states of a classical bit, a quantum bit or qubit can be in a superposition of two states simultaneously. Operations and measurements on these qubits obey the constraints of quantum mechanics. It is now understood that quantum computers have great power in principle to go beyond classical computers, but that not every application is well suited to implementation on quantum computers. For reasons explained in more detail in the Introduction, scientific problems in chemical and materials sciences are uniquely suited to take advantage of quantum computing in the relatively near future. Indeed, quantum computing offers the best hope to solve many of the most important and difficult problems in this field. For example, quantum materials, such as superconductors and complex magnetic materials, show novel kinds of ordered phases that are natural from the point of view of quantum mechanics but difficult to access via computation on classical computers. Quantum sensors based on solid materials are already widely used but could be greatly improved with insight from quantum computations, as could materials for information technologies. Quantum chemical dynamics is another example of a problem that is intrinsically well suited to studies on quantum computers. Applications of quantum chemical dynamics include catalysis, artificial photosynthesis, and other industrially important processes. Quantum computers exist in the laboratory and are beginning to exceed 50 qubits, which is roughly the size beyond which their behavior cannot be predicted or emulated on present-day classical supercomputers. While a quantum computer of 50 qubits is almost certainly not powerful enough to tackle the major scientific challenges in chemical and materials sciences, some of these major challenges start to become accessible with a few hundred qubits if error rates can be kept small. This roundtable was convened to ask how emerging quantum computers can be applied to major scientific problems in chemical and materials sciences, in light of Basic Energy Sciences’s leading role in these fields and the Department of Energy’s leading role in high-performance scientific computation more generally. The main outcome of the roundtable was a consensus that there are scientific problems of great importance on which emerging quantum computers have the potential for disruptive impact, and where comparable progress is unlikely to occur by other means.

36 MATERIALS SCIENCE↗

Direct observation of 3D topological spin textures and their interactions using soft x-ray vector ptychography

Magnetic topological defects are energetically stable spin configurations characterized by symmetry breaking. Vortices and skyrmions are two well-known examples of 2D spin textures that have been actively studied for both fundamental interest and practical applications. However, experimental evidence of the 3D spin textures has been largely indirect or qualitative to date, due to the difficulty of quantitively characterizing them within nanoscale volumes. Here, we develop soft x-ray vector ptychography to quantitatively image the 3D magnetization vector field in a frustrated superlattice with 10 nm spatial resolution. By applying homotopy theory to the experimental data, we quantify the topological charge of hedgehogs and anti-hedgehogs as emergent magnetic monopoles and probe their interactions inside the frustrated superlattice. We also directly observe virtual hedgehogs and anti-hedgehogs created by magnetically inert voids. We expect that this new quantitative imaging method will open the door to study 3D topological spin textures in a broad class of magnetic materials. Our work also demonstrates that magnetically frustrated superlattices could be used as a new platform to investigate hedgehog interactions and dynamics and to exploit optimized geometries for information storage and transport applications.

Rana, A↗

Mesoscale magnetism

Magnetic interactions give rise to a surprising amount of complexity due to the fact that both static and dynamic magnetic properties are governed by competing short-range exchange interactions and long-range dipolar coupling. Even though the underlying dynamical equations are well established, the connection of magnetization dynamics to other degrees of freedom, such as optical excitations, charge and heat flow, or mechanical motion, make magnetism a mesoscale research problem that is still wide open for exploration. Synthesizing magnetic materials and heterostructures with tailored properties will allow to take advantage of magnetic interactions spanning many length-scales, which can be probed with advanced spectroscopy and microscopy and modeled with multi-scale simulations. Finally, this paper highlights some of the current basic research topics in mesoscale magnetism, which beyond their fundamental science impact are also expected to influence applications ranging from information technologies to magnetism based energy conversion.

36 MATERIALS SCIENCE↗

Chemical stability of highly (0001) textured Sm(CoCu){sub 5} thin films with a thin Ta capping layer

With the highest magnetocrystalline anisotropy constant (Ku) among practical magnetic materials, SmCo{sub 5} could be a very attractive candidate for future high areal density magnetic recording. However, its corrosion resistance is always a concern in recording media applications. In this paper, the chemical stability and microstructures of highly (0001) textured Sm(CoCu){sub 5} thin films with and without a 3 nm Ta capping layer were reported. For Sm(CoCu){sub 5} thin films without a capping layer, the coercivity decreases significantly (from 8kOe to 1kOe) within one month. Sm(CoCu){sub 5} thin films capped with a thin Ta layer (3 nm) behave differently. Even exposed to a laboratory environment (25 deg. C) over 3 years, the Ta-capped Sm(CoCu){sub 5} thin films are stable in terms of structural and magnetic properties, i.e., there were no changes in X-ray diffraction peaks and vibrating sample magnetometer hysteresis loops. Microstructure of Ta-capped Sm(CoCu){sub 5} thin films showed that Sm(CoCu){sub 5} formed a domelike particle assembly structure on a smooth Ru underlayer and were well covered by partially oxidized Ta capping layer, as shown by TEM cross-section micrographs. Accelerated corrosion treatment (130 deg. C, 95% relative humidity, 6 h) was performed on Ta-capped Sm(CoCu){sub 5} thin films. X-ray photoelectron spectroscopy (XPS) results showed that no Co was detected on the sample surface before the corrosion treatment, but strong XPS signals of CoOx and Co(OH)x were observed after treatment. Therefore, none of our Sm(CoCu){sub 5} thin films can pass the accelerated corrosion test. Hcp-phased CoPt-alloys are proposed as better capping materials for Sm(CoCu){sub 5} thin films in future high-density magnetic recording applications.

36 MATERIALS SCIENCE↗

Surface Magnetism of Cobalt Nanoislands Controlled by Atomic Hydrogen

Controlling the spin states of the surface and interface is key to spintronic applications of magnetic materials. We report the evolution of surface magnetism of Co nanoislands on Cu(111) upon hydrogen adsorption and desorption with the hope of realizing reversible control of spin-dependent tunneling. Spin-polarized scanning tunneling microscopy reveals three types of hydrogen-induced surface superstructures, 1H-(2 × 2), 2H-(2 × 2), and 6H-(3 × 3), with increasing H coverage. The prominent magnetic surface states of Co, while being preserved at low H coverage, become suppressed as the H coverage level increases, which can then be recovered by H desorption. First-principles calculations reveal the origin of the observed magnetic surface states by capturing the asymmetry between the spin-polarized surface states and identify the role of hydrogen in controlling the magnetic states. This study offers new insights into the chemical control of magnetism in low-dimensional systems.

36 MATERIALS SCIENCE↗

Deciphering and Manipulating Low Dimensional Magnetism

This program investigates the electronic structure and collective quantum phenomena of correlated magnetic materials using advanced angle-resolved photoemission spectroscopy (ARPES) and complementary probes, with a focus on three interrelated material families: (i) the semiconducting van der Waals magnet Cr₂Ge₂Te₆, (ii) metallic Fe-based van der Waals magnets including Fe₃GeTe₂ Fe₃GaTe₂, and Fe5GeTe₂, and (iii) kagome magnets such as FeGe, FeSn, and CsV₃Sb₅/CsCr₃Sb₅. In Cr₂Ge₂Te₆, our work established how spin excitations develop across a dimensional crossover as spins establish correlation to form long range order, providing a clean platform to isolate correlation effects. In metallic Fe-based magnets, we uncovered the dichotomy between flat and dispersive bands, revealed momentum-dependent electronic reconstructions tied to magnetic order, and demonstrated reversible, non-volatile electronic switching near room temperature, highlighting the strong coupling among spin, charge, and lattice degrees of freedom in metallic ferromagnets. In kagome magnets, we identified charge density wave formation, symmetry breaking, flat-band renormalization, and field-induced momentum-dependent electronic anisotropy, elucidating how geometric frustration and electronic correlations conspire to generate emergent quantum states. Collectively, these results establish a unified microscopic framework for understanding correlation-driven electronic reconstruction, symmetry breaking, and collective order across semiconducting and metallic magnetic systems, advancing DOE mission goals in quantum materials discovery and control.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic layer epitaxy of kagome magnet Fe 3 Sn 2 and Sn-modulated heterostructures

Magnetic materials with kagome crystal structure exhibit rich physics, such as frustrated magnetism, skyrmion formation, topological flat bands, and Dirac/Weyl points. Until recently, most studies on kagome magnets have been performed on bulk crystals or polycrystalline films. Here, we report the atomic layer molecular beam epitaxy synthesis of high-quality thin films of topological kagome magnet Fe 3 Sn 2 . The structural and magnetic characterization of Fe 3 Sn 2 on epitaxial Pt(111) identifies highly ordered films with c-plane orientation and an in-plane magnetic easy axis. Studies on the local magnetic structure by anomalous Nernst effect imaging reveal in-plane oriented micrometer size domains. Superlattice structures consisting of Fe 3 Sn 2 and Fe 3 Sn are also synthesized by atomic layer molecular beam epitaxy, demonstrating the ability to modulate the sample structure at the atomic level. The realization of high-quality films by atomic layer molecular beam epitaxy opens the door to explore the rich physics of this system and investigate novel spintronic phenomena by interfacing Fe 3 Sn 2 with other materials.

36 MATERIALS SCIENCE↗

Layer Hall effect in a 2D topological axion antiferromagnet

While ferromagnets have been known and exploited for millennia, antiferromagnets (AFMs) were only discovered in the 1930s. The elusive nature indicates AFMs' unique properties: At large scale, due to the absence of global magnetization, AFMs may appear to behave like any non-magnetic material; However, such a seemingly mundane macroscopic magnetic property is highly nontrivial at microscopic level, where opposite spin alignment within the AFM unit cell forms a rich internal structure. In topological AFMs, such an internal structure leads to a new possibility, where topology and Berry phase can acquire distinct spatial textures. Here, we study this exciting possibility in an AFM Axion insulator, even-layered MnBi 2 Te 4 flakes, where spatial degrees of freedom correspond to different layers. Remarkably, we report the observation of a new type of Hall effect, the layer Hall effect, where electrons from the top and bottom layers spontaneously deflect in opposite directions. Specifically, under no net electric field, even-layered MnBi 2 Te 4 shows no anomalous Hall effect (AHE); However, applying an electric field isolates the response from one layer and leads to the surprising emergence of a large layer-polarized AHE (~50e 2 /h). Such a layer Hall effect uncovers a highly rare layer-locked Berry curvature, which serves as a unique character of the space-time PT-symmetric AFM topological insulator state. Moreover, we found that the layer-locked Berry curvature can be manipulated by the Axion field, E∙B, which drives the system between the opposite AFM states. Our results achieve previously unavailable pathways to detect and manipulate the rich internal spatial structure of fully-compensated topological AFMs. The layer-locked Berry curvature represents a first step towards spatial engineering of Berry phase, such as through layer-specific moiré potential.

36 MATERIALS SCIENCE↗

Magnetic Resonance Imaging Protocol Optimization for Delineation of Gross Tumor Volume in Hypopharyngeal and Laryngeal Tumors

Purpose: To optimize the use of MRI for delineation of gross tumor volume for radiotherapy treatment planning purposes in hypopharyngeal and laryngeal tumors. Methods and Materials: Magnetic resonance images (T1 weighted and T2 weighted) of a healthy volunteer were acquired using a 1.5 T and 3.0 T MR scanner. Various receiver coils were investigated that were compatible with the immobilization mask needed for reliable coregistration with computed tomography data. For the optimal receiver coil, the influence of resolution, slice thickness, and strength of magnetic field on the signal-to-noise ratio (SNR) was studied. Feasibility of the definitive protocol was tested on patients with hypopharyngeal (n = 19) and laryngeal (n = 42) carcinoma. Results: Large differences in SNR were obtained for the various coils. The SNR values obtained using surface coils that were compatible with the immobilization mask were three times higher than those obtained using a standard head-and-neck coil and five times higher than those obtained using a body coil. High-resolution images (0.4 x 0.4 x 4 mm{sup 3}) showed superior anatomic detail and resulted in a 4-min scan time. Image quality at 3.0 T was not significantly better compared with 1.5 T. In 3 patients the MR study could not be performed; for 5 patients images were severely deteriorated by motion artefacts. High-quality MR images were obtained in 53 patients. Conclusions: High-resolution MR images of the hypopharynx and larynx can be obtained in the majority of patients using surface receiver coils in combination with the radiotherapy mask. These MR images can be successfully used for tumor delineation in radiotherapy.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Static Hopf Solitons and Knotted Emergent Fields in Solid-State Noncentrosymmetric Magnetic Nanostructures

Two-dimensional topological solitons, commonly called Skyrmions, are extensively studied in solid-state magnetic nanostructures and promise many spintronics applications. However, three-dimensional topological solitons dubbed hopfions have not been demonstrated as stable spatially localized structures in solid-state magnetic materials. Here we model the existence of such static solitons with different Hopf index values in noncentrosymmetric solid magnetic nanostructures with a perpendicular interfacial magnetic anisotropy. We show how this surface anisotropy, along with the Dzyaloshinskii-Moriya interactions and the geometry of nanostructures, stabilize hopfions. We show knots in emergent field lines and computer simulate Lorentz transmission electron microscopy images of such solitonic configurations to guide their experimental discovery in magnetic solids.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Magnetic interactions in CoCrPt-oxide based perpendicular magnetic recording media

First order reversal curves (FORC) method has been reported to be an efficient tool to study interaction between grains and layers of magnetic materials. Although a few studies have been carried out on perpendicular recording media in the past, a study on the effect of systematic variation of exchange interaction in granular perpendicular magnetic recording media on FORC contours has not been carried out in detail. Such a study will help to understand the use of FORC better. In this paper, we have made a systematic set of samples in order to study the variation in exchange coupling and its effect on FORC contours. The pressure during the deposition of the second ruthenium layer and the magnetic layer was varied to alter the separation between the grains and hence the exchange interaction between the grains in the CoCrPt-oxide recording layer. In addition, the thickness of Co-alloy cap layer was used as an additional tool to control the exchange interaction between the magnetic grains. The results indicated that the interaction field obtained from the FORC does not vary in a significant manner when the changes in exchange interaction are small. In comparison, the peak intensity of the FORC shows a clear trend as the exchange coupling is varied, making it a more suitable parameter to study the exchange and magnetostatic interactions in systems such as magnetic recording media.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Borderline Magnetism: How Adding Mg to Paramagnetic Ce Co 3 Makes a 450-K Ferromagnet with Large Magnetic Anisotropy

A recent experimental study [Phys. Rev. Appl. 9, 024023 (2018)] on paramagnetic CeCo 3 finds that magnesium alloying induces a ferromagnetic transition with intrinsic properties large enough for permanent magnet applications. Here we explain these surprising results via a first-principles study of the electronic structure and magnetism of magnesium-alloyed CeCo 3 . We find the origin of this magnesium-induced ferromagnetic transition to be Stoner physics—the substantial increase in the Fermi-level density of states N(E F ) with Mg alloying. Here, our calculations suggest that both Ce and Co atoms are likely to be important for generating large magnetic anisotropy suggesting the viability of Co-3d and Ce-4f interaction for the generation of magnetic anisotropy in magnetic materials. These results offer a route to the discovery of ferromagnetic materials and provide fundamental insight into the magnetic properties of these alloys.

36 MATERIALS SCIENCE↗

Magnetic Proximity Effects in Iron Germanium Telluride/Platinum Heterostructures

Van der Waals (vdW) magnetic materials have attracted considerable attention for use in spintronic devices such as those controlled by spin–orbit torque (SOT). Such SOT-driven devices are typically fabricated by bringing a vdW magnet in proximity to a spin–charge conversion layer to achieve current-driven magnetization switching. Here, we show that such structures fabricated with iron germanium telluride (FGT) and platinum can exhibit emergent magnetic properties, which we attribute to magnetic proximity effects at the FGT/Pt interface. These changes manifest as increased perpendicular magnetic anisotropy and the emergence of additional magnetization reversal steps as probed by magneto-transport, with the most significant changes appearing in thinner flakes. The behavior was found to be robust and consistently appeared in samples made with crystals from different vendors. In conclusion, our results demonstrate the potential for engineering vdW spintronic systems through magnetic proximity effects.

2D magnet↗

Cryogenic Undulator for a Table Top FEL

A laser plasma accelerator is under development at the Max-Planck-Institut fuer Quantenoptik in Garching. This accelerator will be part of an X-ray table top FEL in the future. The FEL radiation will be produced with a small period in-vacuum undulator. The coercivity of the magnetic material has to be sufficiently high in order to avoid demagnetization due to electron losses. The best performance can be achieved with a cryogenic permanent magnet undulator design. (Nd{sub 0.2}Pr{sub 0.8}){sub 2}Fe{sub 14}B magnets are suited for low temperatures since they do not suffer from a spin reorientation. A new (Nd{sub 0.2}Pr{sub 0.8}){sub 2}Fe{sub 14}B material has been characterized at various temperatures and the results are presented. Based on this material a 20 period prototype with a period length of 9 mm and a magnetic gap of 2.5 mm is currently under construction.

36 MATERIALS SCIENCE↗

Enhanced magnetism of Cu{sub n} clusters capped with N and endohedrally doped with Cr

The focus of our work is on the production of highly magnetic materials out of Cu clusters. We have studied the relative effects of N-capping as well as N mono-doping on the structural stability and electronic properties of the small Cu clusters using first principles density functional theory based electronic structure calculations. We find that the N-capped clusters are more promising in producing giant magnetic moments, such as 14 μ{sub B} for the Cu{sub 6}N{sub 6} cluster and 29 μ{sub B} for the icosahedral Cu{sub 13}N{sub 12} cluster. This is accompanied by a substantial enhancement in their stability. We suggest that these giant magnetic moments of the capped Cu{sub n} clusters have relevance to the observed room temperature ferromagnetism of Cu doped GaN. For cage-like hollow Cu-clusters, an endohedral Cr-doping together with the N-capping appears as the most promising means to produce stable giant magnetic moments in the copper clusters.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗