Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “La”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2023

Methods to Create Novel La 2- x Sr x CuO 4 Devices with Multiple Atomically Sharp Interfaces

We present methods to create devices that utilize the high-temperature superconductor La 2-x Sr x CuO 4 grown by atomic layer-by-layer molecular beam epitaxy (ALL-MBE). The ALL-MBE synthesis technique provides atomically precise interfaces necessary for the tunnel junctions, Josephson junctions, and dyon detection devices that will be considered. A series of microfabrication processing steps using established techniques are given for each device, and their details are discussed. These procedures are easily extended to generate more complex designs and could be suitable for a wider variety of materials.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
DOE OSTI2023

Effects of Focused Ion Beam Lithography on La 2– x Sr x CuO 4 Single Crystals

Focused ion beam (FIB) milling is a mask-free lithography technique that allows the precise shaping of 3D materials on the micron and sub-micron scale. The recent discovery of electronic nematicity in La 2–x Sr x CuO 4 (LSCO) thin films triggered the search for the same phenomenon in bulk LSCO crystals. With this motivation, we have systematically explored FIB patterning of bulk LSCO crystals into micro-devices suitable for longitudinal and transverse resistivity measurements. We found that several detrimental factors can affect the result, ultimately compromising the possibility of effectively using FIB milling to fabricate sub-micrometer LSCO devices, especially in the underdoped regime.

36 MATERIALS SCIENCE↗
DOE OSTI2025

Electronic structure of compressively strained thin film La$_2$PrNi$_2$O$_7$

The discovery of superconductivity in the bulk nickelates under high pressure is a major advance in physics. The recent observation of superconductivity at ambient pressure in compressively strained bilayer nickelate thin films has now enabled direct characterization of the superconducting phase through angle resolved photoemission spectroscopy (ARPES). Here we present an in-situ ARPES study of compressively strained La$_2$PrNi$_2$O$_7$ films grown by oxide molecular beam epitaxy, and the ozone treated counterparts with an onset T$_c$ of 40 K, supplemented with results from pulsed laser deposition films with similar T$_c$. We resolve a systematic strain-driven electronic band shift with respect to that of bulk crystals, in qualitative agreement with density functional theory (DFT) calculations. However, the strongly renormalized flat 3$d_{z2}$ band shifts a factor of 5-10 smaller than anticipated by DFT. Furthermore, it stays ~70 meV below the Fermi level, contradicting the expectation that superconductivity results from the high density of states of this band at the Fermi level. We also observed a non-trivial k$_z$ dispersion of the cuprate-like 3$d_{x2-y2}$ band. Combined with results from both X-ray diffraction and DFT, we suggest that the strained films are under ~5 GPa effective pressure, considerably larger than the naïve expectation from the DFT relaxed structure. Finally, the ~70 meV energy position is intriguingly close to the collective mode coupling more prominently seen in thin films, in the energy range of both oxygen related phonons and the maximum of the spin excitation spectrum.

FOS: Physical sciences↗
DOE OSTI2020

Unprecedented Analysis of LA’s Clean Energy Transformation

Jurisdictions like the City of Los Angeles are boldly establishing ambitious energy objectives—and NREL can be a key partner in informing these transitions.The City of Los Angeles is one of several U.S. local governments setting monumental, measurable goals to transform their energy economies. At the direction of its City Council, LA has embarked on a plan to modernize its electricity system infrastructure—aiming for a 100% renewable energy supply by 2045, along with aggressive electrification targets for buildings and vehicles.

LA100↗
DOE OSTI2021

Rapid Laser Reactive Sintering of Garnet Li 6.1 La 3 Zr 2 Al 0.3 O 12 Solid-State Electrolyte

All solid-state lithium-ion batteries (ASSLIBs) have gained significant interest in recent years due to their wide range of applications, including mobile devices, electric vehicles, and grid storage. Garnet-type Li 7 La 3 Zr 2 O 12 (LLZO) solid-state electrolyte (SSE) continues to be a significant player in the fabrication of ASSLIBs with excellent ionic conductivity on the order of 10 -3 S•cm -1 with the integration of dopants and sintering aids to assist conductivity and structural evolution during the sintering procedure. Traditional sintering techniques, such as solid-state sintering (SSS), have been proven to yield desirable crystal structures. However, the low ionic conductivity results from inferior microstructure, and lithium loss is a significant challenge. Recently, a relatively novel sintering process called rapid laser reactive sintering (RLRS) has shown great potential for achieving fully dense solid oxide electrolytes with less surface element loss, resulted in high ionic conductivity. Here, we applied the same RLRS method to fabricate LLZO dense electrolyte with different amounts of aluminum dopants. We hope the rapid high-temperature sintering can densify the electrolyte and avoid the lithium loss for achieving high lithium-ion conductivity. In this work, we optimized multiple combinations of laser parameters (speed, power, and defocus distance), initial precursor composition, and controlled atmospheres to discover the optimal conditions for reaching the efficacious crystal structure, microstructure, and ionic conductivity.

25 ENERGY STORAGE↗
DOE OSTI2022

Modified La—Fe—Si magnetocaloric alloys

A magnetocaloric material comprising a La—Fe—Si based alloy composition that is compositionally modified to include a small but effective amount of at least one of Al, Ga, and In to improve mechanical stability of the alloy (substantially reduce alloy brittleness), improve thermal conductivity, and preserve comparable or provide improved magnetocaloric effects. The alloy composition may be further modified by inclusion of at least one of Co, Mn, Cr, and V as well as interstitial hydrogen.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on La(SiP3)2 by Materials Project

LaSi2P6 crystallizes in the orthorhombic Cmc2_1 space group. The structure is two-dimensional and consists of sixteen lanthanum molecules; sixteen phosphine molecules; and four Si2P5 sheets oriented in the (0, 1, 0) direction. In each Si2P5 sheet, there are four inequivalent Si4- sites. In the first Si4- site, Si4- is bonded to four P1+ atoms to form corner-sharing SiP4 tetrahedra. There are a spread of Si–P bond distances ranging from 2.20–2.29 Å. In the second Si4- site, Si4- is bonded to four P1+ atoms to form corner-sharing SiP4 tetrahedra. There are a spread of Si–P bond distances ranging from 2.23–2.31 Å. In the third Si4- site, Si4- is bonded to four P1+ atoms to form corner-sharing SiP4 tetrahedra. There are a spread of Si–P bond distances ranging from 2.23–2.28 Å. In the fourth Si4- site, Si4- is bonded to four P1+ atoms to form corner-sharing SiP4 tetrahedra. There are a spread of Si–P bond distances ranging from 2.24–2.29 Å. There are twelve inequivalent P1+ sites. In the first P1+ site, P1+ is bonded in a water-like geometry to two Si4- atoms. In the second P1+ site, P1+ is bonded in a single-bond geometry to one Si4- atom. In the third P1+ site, P1+ is bonded in a water-like geometry to two Si4- atoms. In the fourth P1+ site, P1+ is bonded in a single-bond geometry to one Si4- atom. In the fifth P1+ site, P1+ is bonded in a single-bond geometry to one Si4- atom. In the sixth P1+ site, P1+ is bonded in a water-like geometry to two equivalent Si4- atoms. In the seventh P1+ site, P1+ is bonded in an L-shaped geometry to two equivalent Si4- atoms. In the eighth P1+ site, P1+ is bonded in a single-bond geometry to one Si4- atom. In the ninth P1+ site, P1+ is bonded in a water-like geometry to two equivalent Si4- atoms. In the tenth P1+ site, P1+ is bonded in a water-like geometry to two Si4- atoms. In the eleventh P1+ site, P1+ is bonded in a bent 120 degrees geometry to two Si4- atoms. In the twelfth P1+ site, P1+ is bonded in a water-like geometry to two equivalent Si4- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on La(P3Os)4 by Materials Project

LaOs4P12 crystallizes in the cubic Im-3 space group. The structure is three-dimensional and consists of two lanthanum molecules and one OsP3 framework. In the OsP3 framework, Os+1.75- is bonded to six equivalent P+0.33+ atoms to form distorted corner-sharing OsP6 octahedra. The corner-sharing octahedral tilt angles are 62°. All Os–P bond lengths are 2.38 Å. P+0.33+ is bonded in a bent 120 degrees geometry to two equivalent Os+1.75- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on La(WO3)11 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on La(As3Os)4 by Materials Project

LaOs4As12 crystallizes in the cubic Im-3 space group. The structure is three-dimensional and consists of two lanthanum molecules and one OsAs3 framework. In the OsAs3 framework, Os+1.75- is bonded to six equivalent As+0.33+ atoms to form corner-sharing OsAs6 octahedra. The corner-sharing octahedral tilt angles are 58°. All Os–As bond lengths are 2.48 Å. As+0.33+ is bonded in a bent 120 degrees geometry to two equivalent Os+1.75- atoms.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Materials Data on La(Mo3Se4)2 by Materials Project

Computed materials data using density functional theory calculations. These calculations determine the electronic structure of bulk materials by solving approximations to the Schrodinger equation. For more information, see https://materialsproject.org/docs/calculations

36 MATERIALS SCIENCE↗
DOE OSTI2025

Rapid scalable plasma processing of thin-film Li–La–Zr–O solid-state electrolytes

Solid-state electrolytes, such as lithium lanthanum zirconium oxide (LLZO), show promise as technologies for next-generation high-energy-density batteries, but commercial development has been hindered by a lack of scalable processing methods. Current fabrication methods are costly or require long annealing steps to create dense films. We report an atmospheric pressure blown-arc nitrogen plasma jet process to rapidly form sub-micrometer-thick, dense amorphous LLZO (a-LLZO) films from sol-gel precursors. Films are processed in less than 2 min, an order of magnitude faster than what has previously been reported. We demonstrate 500-nm-thick a-LLZO films processed at 350°C with an ionic conductivity of 2 × 10 −6 S/cm at 30°C and 2 × 10 −3 S/cm at 100°C and a conductance of 19 S at 100°C, the highest conductance of any LLZO phase to date. Here, the films exhibit outstanding smooth surface morphology with low defectivity, advancing atmospheric plasma processing as a scalable processing method for solid-state electrolytes.

25 ENERGY STORAGE↗
DOE OSTI2025

Is a Homologous Series Member Equal to or Greater than the Sum of its Subunits? A Focus on a Few Fe-based BaNiSn3 subunits: LnFeGe3 (Ln = La, Pr)

The homologous series Lnn+1MnGe3n+1 (Ln = Ce, Pr, M = Fe, Co) has proven to be a fruitful platform for tuning physical properties as a function of subunit stacking. In this study, we investigate the crystal growth, structure, and physical properties of PrFeGe3, aiming to deconstruct Pr4Fe3Ge10 (n = 3) into its subunits, including the BaNiSn3 and CeNiSi2 structure types. The electrical resistivity and magnetic susceptibility of PrFeGe3 were measured. The magnetic properties reveal PrFeGe3 to be antiferromagnetic (5 K) with an effective moment of eff = 4.38 B/F.U., larger than the spin-only moment from Pr3+ (3.58 B). Due to the large magnetic moment observed, the oxidation state of the elements was determined using spectroscopic methods including X-ray absorption spectroscopy and X-ray photoelectron spectroscopy. The neutral oxidation state of iron determined from X-ray photoelectron spectroscopy supports itinerant magnetic behavior of iron. Annealing, in tandem with differential scanning calorimetry, revealed PrFeGe3 to be a precursor for the formation of new homologous series members.

36 MATERIALS SCIENCE↗
DOE OSTI2021

Working Principle of an Ionic Liquid Interlayer During Pressureless Lithium Stripping on Li 6.25 Al 0.25 La 3 Zr 2 O 12 (LLZO) Garnet‐Type Solid Electrolyte

Abstract Solid‐state‐batteries employing lithium metal anodes promise high theoretical energy and power densities. However, morphological instability occurring at the lithium/solid–electrolyte interface when stripping and plating lithium during cell cycling needs to be mitigated. Vacancy diffusion in lithium metal is not sufficiently fast to prevent pore formation at the interface above a certain current density during stripping. Applied pressure of several MPa can prevent pore formation, but this is not conducive to practical application. This work investigates the concept of ionic liquids as “self‐adjusting” interlayers to compensate morphological changes of the lithium anode while avoiding the use of external pressure. A clear improvement of the lithium dissolution process is observed as it is possible to continuously strip more than 70 μm lithium (i. e., 15 mAh cm −2 charge) without the need for external pressure during assembly and electrochemical testing of the system. The impedance of the investigated electrodes is analyzed in detail, and contributions of the different interfaces are evaluated. The conclusions are corroborated with morphology studies using cryo‐FIB‐SEM and chemical analysis using XPS. This improves the understanding of the impedance response and lithium stripping in electrodes employing liquid interlayers, acting as a stepping‐stone for future optimization.

Fuchs, Till↗
DOE OSTI2022

In-situ exsolution of bimetallic CoFe nanoparticles on (La,Sr)FeO 3 perovskite: Its effect on electrocatalytic oxidative coupling of methane

This study presents in-situ reduction of lanthanum strontium cobalt ferrite (LSCF) perovskite as an effective method for modifying its surface properties and enhancing its electrocatalytic reactivity for oxidative coupling of methane (OCM). The evolution of hetero-phases during the reduction of LSCF resulted in CoFe nanoparticles being formed at the surface. The in-situ reduced LSCF cell for OCM could be operated in either an ion pump or a fuel cell mode. High selectivity of 63% and 10.2% were reported for C 2+ hydrocarbons and C 3 H 6 , respectively. DFT calculations on LSCF and CoFe revealed that the high selectivity of C 2+ hydrocarbons on the LSCF primarily stems from the presence of CoFe nanoparticles. In-situ DRIFTS conducted under CH 4 proved that complete oxidation of CH 4 can be effectively inhibited by reducing LSCF, and control of oxygen supply is an important parameter for selective conversion of CH 4 to higher order hydrocarbon.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗