SEARCH · Engineering Papers

Results for “LANTHANIDE”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS2009

Method and apparatus for detecting and quantifying bacterial spores on a surface

A method and an apparatus for detecting and quantifying bacterial spores on a surface. In accordance with the method: bacterial spores are transferred from a place of origin to a test surface, the test surface comprises lanthanide ions. Aromatic molecules are released from the bacterial spores; a complex of the lanthanide ions and aromatic molecules is formed on the test surface, the complex is excited to generate a characteristic luminescence on the test surface; the luminescence on the test surface is detected and quantified.

Ponce, Adrian↗

NASA NTRS2016

Method and Apparatus for Detecting and Quantifying Bacterial Spores on a Surface

Ponce, Adrian↗

DOE OSTI2022

Electrochemical Corrosion of SIMFUEL: Effects of dissolved H2 and noble metal particles

This report describes the results from electrochemical corrosion tests that were conducted using simulated spent fuel (SIMFUEL) materials comprised of UO2 and surrogate fission products. Two SIMFUEL compositions were tested to quantify the effect of noble metal inclusions and dissolved H2 on the UO2 dissolution rate. One material consisted of UO2 with added lanthanide oxides (UO2 N) and the other consisted of UO2 with added lanthanide oxides and noble metals (UO2-H) at concentrations to simulate high burnup fuel. The electrochemical corrosion tests on the SIMFUEL materials were conducted in aqueous electrolyte solutions (pH 10) that were either saturated with air or purged with a H2/Ar gas mixture to maintain a constant dissolved H2 concentration. The results from electrochemical corrosion tests on SIMFUEL can be applied to qualitatively understand and also quantify the separate effects of water chemistry and fuel composition on the degradation behavior of the UO2 matrix. Open circuit potential (OCP) measurements on a SIMFUEL material of known composition (i.e., known fraction of NMPs at the fuel surface) immersed in a known solution chemistry (i.e., pH, Eh, [O2], [H2]) at known temperature provide qualitative insight into the degradation behavior of the UO2 matrix. If the OCP is above the threshold potential at which the oxidative dissolution of U(IV) to U(VI) occurs, the SNF is expected to degrade by oxidative processes under the experimental conditions. The net currents that are measured during potentiostatic tests, during which the surface potential of the SIMFUEL material is fixed by a potentiostat, can be used to quantify the UO2 degradation rate and optimize the rate constant values used in the Fuel Matrix Degradation Model (FMDM) for half reactions that occur on the SNF surface. Specifically, electrochemical measurements enable the estimation of the total anodic current at ECORR–which is the surface potential at which the total anodic and total cathodic currents are equal–so that the rate constant values for key reactions can be calculated. The open circuit potential measurements, potentiostatic tests, surface property measurements (scanning electron microscopy images and electrochemical impedence spectroscopy plots), and solution elemental composition analyses are being performed to update and optimize the FMDM. A case study is presented herein to show how electrochemical corrosion test results and accompanying characterization results for the UO2 N material in air-saturated solution can be used to validate the SNF surface reaction module of the FMDM. Future electrochemical tests will be conducted to provide quantitative information on the effects of NM content (burnup), H2 concentration, water chemistry, temperature, and galvanic couples with cladding and EBS alloys on UO2 degradation that can be used to improve the accuracy and functionality of the FMDM.

Thomas, Sara↗

DOE OSTI2024

Intrinsic Bonding and Reactivity of Actinide Clusters Poster

The effect of electronic structure on chemical bonding and reactivity is one of the most important questions in the field of chemistry. Insight into chemical bond formation involving elements that contain f electrons (i.e., the lanthanides and actinides) is critical for solving specific technical challenges, such as development of advanced nuclear fuel cycles and efficient rare earth separations, as well as a broader understanding of bonding across the entire periodic table. The primary technique for studying the fundamentals of lanthanide and actinide bonding is crystallization of metal-ligand compounds followed by structural determination with X-rays and comparison to theory with computational chemistry. While this procedure has yielded significant insights for a wide variety of elements, it is challenging to apply to the heavier trans-uranic actinides such as berkelium and californium because of limited material availability, significant radioactivity, and poorly understood chemical reactivity of these elements. We hypothesize that by forming actinide-ligand clusters in a mass spectrometer and probing their reactivity in the gas-phase, many of the challenges associated with studying the heavier trans-uranic elements can be circumvented. This project will develop a capability to address a wide range of actinide bonding and reactivity phenomena, increasing Idaho National Laboratory’s capability to address fundamental questions at the forefront of heavy element chemical and molecular science.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2024

Dilute alloy catalysts for electrochemical CO 2 reduction

A product includes a dilute alloy catalyst for carbon dioxide reduction. The catalyst has a majority component and at least one minority component. The majority component is present in a concentration of greater than 90 atomic percent of the catalyst. The majority component is copper, and each minority component is selected from the group consisting of: a transition metal, a main group metal, a lanthanide, and a semimetal. A method includes forming a product on a cathode. The product includes a dilute alloy catalyst for carbon dioxide reduction. The catalyst has a majority component and at least one minority component. The majority component is present in a concentration of greater than 90 atomic percent of the catalyst. The majority component is copper, and each minority component is selected from the group consisting of: a transition metal, a main group metal, a lanthanide, and a semimetal.

Biener, Juergen↗

DOE OSTI2024

Understanding Europium and Terbium Speciation and Ion Pairing in Carbonate Complexes Using Advanced Spectroscopy Techniques

Lanthanide (Ln) elements are critical materials that are typically extracted/mined together. Their separation by solvent extraction from acidic media is well known; however, there are few studies in basic media with carbonate anions. We investigated the complexation of Eu(III) and Tb(III) carbonates as solids and solutions in alkaline K2CO3, wherein we sought to access a Tb(IV) carbonate complex through ozonolysis. L3-edge XANES of Eu and Tb carbonate solids, colorless solutions, and a red-hued Tb solution (obtained by ozonolysis) all showed Ln(III) cations. The absence of evidence for a Tb(IV) complex was confirmed through XAS and EPR analyses, despite the solution exhibiting a deep red color. For solids and solutions, EXAFS results indicate molecular Ln(III)-carbonato anions. In terms of the Eu(III) carbonate coordination number, the coordination does not change upon dissolution of the solid sample. Furthermore, EXAFS for the solutions revealed evidence for the association of potassium cations with the Ln(III)-carbonato anions. Furthermore, this direct observation of contact ion pairing by EXAFS at room temperature is rare. The insights into Ln(III) carbonate complexation and solution speciation afforded by XANES-EXAFS, FT-IR, and EPR provides perspectives that serve as benchmarks for future computational and experimental efforts focused on caustic-side solvent extraction of Ln(III) ions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2022

Non‐Linear Optical Properties of the ( RE ) 3 CuGeS 7 Family of Compounds

Abstract Non‐linear optical materials must possess a balanced combination of laser‐induced damage threshold (LDT) and second‐harmonic generation (SHG) and be phase matchable. In our previous work, chiral and polar La 3 CuGeS 7 was identified as a promising non‐linear optical material. Herein, we report the optimization of non‐linear optical properties through replacement of La with smaller lanthanides. It is determined that Gd 3 CuGeS 7 exhibits the best combination of SHG (1.6× AgGaS 2 at 88–105 μm particle size) and LDT (3× AgGaS 2 , 89 MW/cm 2 ) and is phase matchable. Based on changes in metal‐sulfur bond lengths and angles, we further propose structural optimization through solid‐solution formation and doping.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2021

The coordination properties and ionic radius of actinium: A 120-year-old enigma

Actinium is an elusive element with untamed properties and represents a peculiar case in the periodic table, as its isotopes are all radioactive, the longest-lived one having only a 22-year half-life, and the availability of actinium isotopes remains very low (microgram level, at best), hindering research on its compounds. Despite being a natural element discovered more than 120 years ago, and despite an increasing interest in using one of its isotopes ( 225 Ac) for highly efficient cancer therapies, the chemistry of actinium is still largely unknown relative to other elements. Since Ac is the first element of the actinide series, it is accepted that its ion, Ac 3+ , is the most voluminous trivalent cation of the periodic table. However, the structural data available on Ac 3+ compounds are scarce and have mainly been collected in the 1940-1960's, when actinide chemistry was still in its infancy, and have not been put in perspective with the advances in the chemistry of other elements, making it difficult to accurately evaluate its actual size and coordination chemistry. Here, we review progress made on the chemistry of lanthanides and actinides and reevaluate the structural data published on Ac 3+ since the era of the Manhattan Project. The data are combined across different spectroscopic and characterization methods and presented in the context of periodic trends. When considering crystallographic data, solution chemistry results, and the nuclear properties of actinium isotopes, it appears that some structural parameters ascribed to the Ac 3+ ion may have been overestimated. This review can guide researchers interested in actinide sciences and those who are pursuing the development of actinium-based radiotherapies, from isotope production to clinical trials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Radiation-reduced diffusion of Nd in bcc Fe

Here, this study combines ab initio calculations and kinetic Monte Carlo simulations to investigate the bulk diffusion of Nd, an exemplar lanthanide element, in bcc Fe. Contrary to the conventional belief that irradiation accelerates diffusion processes, our study reveals that irradiation can unexpectedly reduce the diffusion of Nd due to the strong binding between substitutional Nd atoms and vacancies in bcc Fe. Combined with the high concentration of nonequilibrium vacancies, this promotes the abundant formation of Nd+3Va defect complexes containing a single Nd substitutional atom and three vacancies, accompanied by the depletion of Nd-vacancy pairs that mediate the diffusion of Nd.

Density functional theory (DFT)↗

DOE OSTI2021

Distribution of rare earth elements in the pilot-scale processing of fly ashes derived from eastern Kentucky coals: Comparisons of the feed and processed ashes

Beneficiated fly ash from the combustion of Central Appalachian high volatile bituminous coals was extracted with HNO 3 in a pilot-scale processing plant. Several major oxides (notably CaO and SO 3 , but also including Fe 2 O 3 , MgO, K 2 O, and P 2 O 5 ) and minor elements (Mn, As, Sr, Ba, and Pb) are depleted in the post-HNO 3 -extraction spent ash. The total lanthanides, Y, and Sc concentration is reduced by about 20% in the spent ash, with Gd showing the greatest decrease. Along with Gd, Nd and Dy are also well differentiated between the feed and spent ashes, with La and Sm showing minimal partitioning. The Gd decrease is correlated with the depletion of Fe 2 O 3 . The heavy rare earth elements (REE heavier than Eu) and Y are disproportionately concentrated in the HNO 3 -leachate compared to the light REE. For the ashes studied, Sc did not partition between the feed and spent ashes. Pozzolanicity tests show that the compressive strength and strength activity indices of the spent ash + ordinary Portland cement (OPC) mixes are comparable to 100% OPC, indicating that the spent ashes produced in the pilot-scale runs have the potential to be sold as a Class F fly ash. Finally, the beneficiated ash chemistry influences the chemistry of the post-HNO 3 -extraction spent ash and the HNO 3 -leachate. A 500-ppm-REE fly ash will presumably be a more economically favorable feedstock than an ash with a significantly lesser concentration.

01 COAL, LIGNITE, AND PEAT↗

DOE OSTI2023

Magnetic ordering in terbium at high pressures and low temperatures

We have investigated magnetic ordering in the heavy lanthanide terbium (Tb) for pressures up to 70 GPa and temperatures down to 20 K by synchrotron x-ray diffraction at the Advanced Photon Source, Argonne National Laboratory. The x-ray diffraction studies were complemented by neutron diffraction studies at the Spallation Neutron Source, Oak Ridge National Laboratory. We focused on the higher-pressure phases of Tb, such as the double hexagonal close-packed (dhcp, above 16 GPa), distorted face-centered cubic (hR24, above 30 GPa), and orthorhombic (oF16, above 51 GPa) phases. We observed the phenomenon of spontaneous magnetostriction in the dhcp and hR24 phases, where magnetic ordering at low temperatures gives rise to subtle splitting in x-ray diffraction peaks. The neutron diffraction study of the dhcp phase at 20 GPa revealed magnetic peaks that can be assigned a propagation vector k = ($\frac{1}{2}$, 0, $\frac{1}{2}$), and a magnetic ordering temperature that is consistent with the magnetostriction effect observed with x-ray diffraction. The high-pressure and low-temperature x-ray diffraction study at 70 GPa in the collapsed oF16 phase did not show any evidence of magnetostriction, indicating a significant decrease in the magnetic moment of the 4f-shell due to band broadening at ultra-high compression.

36 MATERIALS SCIENCE↗

DOE OSTI2021

Bulk and surface diffusion of neodymium in alpha-uranium: Ab initio calculations and kinetic Monte Carlo simulations

A fundamental understanding of lanthanide transport in metallic fuels is critical for high fidelity modeling of the fuel-cladding chemical interaction (FCCI) phenomenon, which can lead to the formation of brittle intermetallic compounds and premature failure of the cladding. Here we report a combined ab initio density functional theory (DFT) and kinetic Monte Carlo (KMC) study of the bulk diffusivity of Nd in α-U, fully taking into account the effect of radiation enhanced diffusion. In this work, the vacancy mechanism is considered to be the dominant mechanism for the bulk diffusion of Nd since a Nd interstitial is found to be intrinsically unstable in α-U. The surface diffusivity of a Nd adatom on α-U (001) surface has been further predicted using KMC simulations parameterized by DFT calculations. The present study suggests that Nd transport via the surface diffusion mechanism can be many orders of magnitude faster than bulk diffusion. Furthermore, the results from the present lower length scale study can be used to inform mesoscale phase-field simulations to determine the effective diffusion coefficient of Nd through α-U with a porous microstructure.

36 MATERIALS SCIENCE↗

DOE OSTI2024

Evaluation of Sb-Nd and Te-Nd phases within the U-Zr fuel matrix and their interactions with HT9 alloy

Antimony (Sb) and tellurium (Te) were investigated as potential additives for U-10Zr (wt.%) metallic fuel to limit the fuel-cladding chemical interaction (FCCI) with HT-9 alloy. Neodymium (Nd) was utilized to simulate the formation of lanthanide-based solid fission products which are known to play a detrimental role in FCCI. Fuel alloys of U-Zr-Sb-Nd and U-Zr-Te-Nd were evaluated in their annealed condition and compared against their as-cast conditions. Isothermal diffusion couple experiments were performed between U-Zr-Nd, U-Zr-Sb-Nd, and U-Zr-Te-Nd against the cladding alloy HT9 to evaluate the effectiveness of the additives to stabilize Nd within the fuel alloys, as well as investigate the interaction regions that form between the different fuel alloys and HT9. Further, SbNd and Sb 3 Nd 4 , and TeNd are found to be the primary neodymium-based phases formed in the U-Zr-Sb-Nd and U-Zr-Te-Nd alloys, respectively. The zirconium-based phase, Zr 2 Sb, is also found to form within the former alloy. All phases were found to remain stable through the diffusion experiments and exhibited no interaction with HT9 constituent elements. Preferential interaction between Nd with additivities Te and Sb compared to constituting elements in HT9 was further verified based on density functional theory (DFT) calculated enthalpy of mixing.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2024

Segmentation and Classification of Fission as Pores in Reactor Irradiated Annular U–10Zr Metallic Fuel Using Machine Learning Models

Metallic fuels, particularly U—10Zr, are promising candidates for next-generation sodium-cooled fast reactors. Irradiation of nuclear fuels in reactors can lead to the formation of solid and gas fission product which subsequently forms microstructural pores, deteriorating fuel performance. Due to the massive amount of pores and complex phases formed, a quantitative description of fission gas pores is not yet available, preventing the development of microstructure-informed fuel performance modeling for fuel qualification. This paper applied a pre-trained deep learning model to ~10,260 high magnification scanning electron microscopy images. This method increased the accuracy of fission gas pore segmentation and allows statistical features to be extracted which cannot be achieved manually. A pre-trained decision tree model worked on the segemenation results and further classified the pores into different categories to produce a correlation between the pores, movement of lanthanides, and temperature gradient during irradiation. Finally, this paper emphasizes the potentials of machine learning models to accelerate fuel research, development, and qualification for advanced reactors.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Preparation of ternary hydrophobic magnetic deep eutectic solvents and an investigation into their physicochemical properties

Hydrophobic magnetic deep eutectic solvents (HMDESs) are considered a subclass of DESs comprised of a hydrogen bond acceptor (HBA), hydrogen bond donor (HBD), and a metal halide salt. These DESs can be easily manipulated by an external magnet and employed in numerous applications including liquid–liquid extractions and catalysis. In this work, a total of forty-six (46) HMDESs were prepared and their physicochemical properties studied. Six structurally unique ionic and non-ionic HBAs were combined with lanthanide and transition metal halide salts and twelve different HBDs to prepare room temperature eutectic solvents. The viscosities of HMDESs ranged from 46 centipoise (cP) to 124,600 cP at 23 °C. Their magnetic susceptibilities, studied by superconducting quantum interference device (SQUID) magnetometry and a magnetic susceptibility balance, varied from 3.03 Bohr magnetons (μB) to 9.32 μB when the type of metal halide salt and its molar ratio were varied. Thermal stabilities ranged from 151.1 °C to 308.5 °C at 5% mass loss. Further, all HMDESs comprised of ionic HBA were observed to be insoluble in hexane. This study demonstrates that the physicochemical properties of HMDESs can easily be tailored by varying the DES constituents as well as their molar ratio. The structural tunability of these solvents make them highly attractive candidates for a plethora of applications ranging from extractions to electrochromic applications, where HMDESs can be easily manipulated by an external magnetic field.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

DOE OSTI2025

Developing aqueous solubilizing agents as an alternative to solvent extraction

Here, advancing separations science is important for the entire field of chemistry. One partitioning technique that would benefit from improvement is solvent extraction. Despite its effective and widespread use, the method suffers from some problems: generation of flammable organic waste, lengthy process times, and safety concerns associated with contacting organic solvents with acidic aqueous solutions. We developed an alternative separation method inspired by solvent extraction that side-steps those issues. Toward this end, we identified that the functionality of an extractant (an agent used in solvent extraction to pull analytes from the aqueous phase into the organic phase) would change if it was modified for water solubility. In this alternative scenario, the extractant transforms into an “aqueous solubilizing agent.” We discovered that adding this aqueous solubilizing agent alongside a precipitating agent caused the contaminants to precipitate, but not the analyte. This separation concept was demonstrated within the bounds of one of the most difficult partitioning problems, separating minor actinides (Am 3+ ) from lanthanides (Ln 3+ ). We discovered that the (HSO 3 Ph) 4 BTP (aq) aqueous solubilizing agent prevented Am 3+ (aq) from precipitating with Ln 3+ (aq) when f-element precipitating agents (NaF (aq) or HF (aq) ) were added. This separation boasts impressive Am 3+ (aq) recovery yield (90 ± 2 %), near quantitative Ln 3+ (aq) removal, and high separation factors [>3000, Am 3+ (aq) vs. Nd 3+ (aq) ]. It seems likely – given the large number of candidate extractants that could be modified for aqueous solubility and the numerous combinations of existing solubilizing and precipitating agents – that this alternative approach could be used broadly in place of solvent extraction and solve other important separation problems.

(HSO3Ph)4BTP(aq)↗

DOE OSTI2024

Comparing Sensor Fusion and Multimodal Chemometric Models for Monitoring U(VI) in Complex Environments Representative of Irradiated Nuclear Fuel

Optical sensors and chemometric models were leveraged for the quantification of uranium(VI) (0–100 μg mL –1 ), europium (0–150 μg mL –1 ), samarium (0–250 μg mL –1 ), praseodymium (0–350 μg mL –1 ), neodymium (0–1000 μg mL –1 ), and HNO 3 (2–4 M) with varying corrosion product (iron, nickel, and chromium) levels using laser fluorescence, Raman scattering, and ultraviolet–visible–near-infrared absorption spectra. In this paper, an efficient approach to developing and evaluating tens of thousands of partial least-squares regression (PLSR) models, built from fused optical spectra or multimodal acquisitions, is discussed. Each PLSR model was optimized with unique preprocessing combinations, and features were selected using genetic algorithm filters. The 7-factor D-optimal design training set contained just 55 samples to minimize the number of samples. The performance of PLSR models was evaluated by using an automated latent variable selection script. PLS1 regression models tailored to each species outperformed a global PLS2 model. PLS1 models built using fused spectra data and a multimodal (i.e., analyzed separately) approach yielded similar information, resulting in percent root-mean-square error of prediction values of 0.9–5.7% for the seven factors. Further, the optical techniques and data processing strategies established in this study allow for the direct analysis of numerous species without measuring luminescence lifetimes or relying on a standard addition approach, making it optimal for near-real-time, in situ measurements. Nuclear reactor modeling helped bound training set conditions and identified elemental ratios of lanthanide fission products to characterize the burnup of irradiated nuclear fuel. Leveraging fluorescence, spectrophotometry, experimental design, and chemometrics can enable the remote quantification and characterization of complex systems with numerous species, monitor system performance, help identify the source of materials, and enable rapid high-throughput experiments in a variety of industrial processes and fundamental studies.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2021

Structural and Spectroscopic Analysis of Ln(II) 18-crown-6 and Benzo-18-crown-6 Complexes (Ln = Sm, Eu, Yb)

Three Ln 2+ 18-crown-6 complexes of the formula Ln(18-crown-6)I 2 (Ln = Sm, Eu, Yb) were isolated from the explicit synthesis of the corresponding LnI 2 salts with 18-crown-6 and tetrabutylammonium tetraphenylborate in organic media under air-free conditions. Each metal complex forms a distorted hexagonal bipyramidal geometry and crystallizes in the monoclinic space group P2 1 /n. Comparatively, crystallization of Ln(benzo-18-crown-6)I 2 (Ln = Sm, Eu, Yb) from the reaction of LnI2 with tetrabutylammonium tetraphenylborate and benzo-18-crown-6 in THF/ethanol under similarly air-free conditions yields two polymorphs. The first form, α, crystallizes in the monoclinic space group P2 1 /c (or the nonstandard setting P2 1 /n for α-Yb); whereas the second polymorph, β, crystallizes in P$\bar{1}$. While the geometries of the molecules only vary slightly, the molecular packing and intramolecular contacts are quite different. In the structure of β, π–π interactions between the benzo- moieties of adjacent molecules are observed, whereas these interactions are absent in α. Despite the similarities in these classically 4f n+1 lanthanide systems, the complexes display distinct spectroscopic features in their respective absorption and photoluminescence spectra. Broadband 5d → 4f photoluminescence was observed for the Sm and Eu compounds in the NIR region and UV–visible region, respectively. None of the three Yb compounds exhibit photoluminescence UV–visible-NIR region; however, a unique photooxidation event was observed resulting in characteristic Yb(III) 4f → 4f transitions in the NIR region of the absorption spectra of these compounds. Finally, these findings are discussed along with structural comparisons of the 18-crown-6 and benzo-18-crown-6 compounds as well as other reported Ln(II) crown complexes in the literature.

crystals↗