Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Interfacial structure”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2021

Enhancing ion transport in charged block copolymers by stabilizing low symmetry morphology: Electrostatic control of interfaces

Recently, the interest in charged polymers has been rapidly growing due to their uses in energy storage and transfer devices. Yet, polymer electrolyte-based devices are not on the immediate horizon because of the low ionic conductivity. In the present study, we developed a methodology to enhance the ionic conductivity of charged block copolymers comprising ionic liquids through the electrostatic control of the interfacial layers. Unprecedented reentrant phase transitions between lamellar and A15 structures were seen, which cannot be explained by well-established thermodynamic factors. X-ray scattering experiments and molecular dynamics simulations revealed the formation of fascinating, thin ionic shell layers composed of ionic complexes. The ionic liquid cations of these complexes predominantly presented near the micellar interfaces if they had strong binding affinity with the charged polymer chains. Therefore, the interfacial properties and concentration fluctuations of the A15 structures were crucially dependent on the type of tethered acid groups in the polymers. Overall, the stabilization energies of the A15 structures were greater when enriched, attractive electrostatic interactions were present at the micellar interfaces. Contrary to the conventional wisdom that block copolymer interfaces act as “dead zone” to significantly deteriorate ion transport, this study establishes a prospective avenue for advanced polymer electrolyte having tailor-made interfaces.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2024

N and OH-Immobilized Cu 3 Clusters In Situ Reconstructed from Single-Metal Sites for Efficient CO 2 Electromethanation in Bicontinuous Mesochannels

Cu-based catalysts hold promise for electrifying CO 2 to produce methane, an extensively used fuel. However, the activity and selectivity remain insufficient due to the lack of catalyst design principles to steer complex CO 2 reduction pathways. Herein, we develop a concept to design carbon-supported Cu catalysts by regulating Cu active sites’ atomic-scale structures and engineering the carbon support’s mesoscale architecture. This aims to provide a favorable local reaction microenvironment for a selective CO 2 reduction pathway to methane. In situ X-ray absorption and Raman spectroscopy analyses reveal the dynamic reconstruction of nitrogen and hydroxyl-immobilized Cu 3 (N,OH-Cu 3 ) clusters derived from atomically dispersed Cu–N 3 sites under realistic CO 2 reduction conditions. The N,OH-Cu 3 sites possess moderate *CO adsorption affinity and a low barrier for *CO hydrogenation, enabling intrinsically selective CO 2 -to-CH 4 reduction compared to the C–C coupling with a high energy barrier. Importantly, a block copolymer-derived carbon fiber support with interconnected mesopores is constructed. The unique long-range mesochannels offer an H 2 O-deficient microenvironment and prolong the transport path for the CO intermediate, which could suppress the hydrogen evolution reaction and favor deep CO 2 reduction toward methane formation. Thus, the newly developed catalyst consisting of in situ constructed N,OH-Cu 3 active sites embedded into bicontinuous carbon mesochannels achieved an unprecedented Faradaic efficiency of 74.2% for the CO 2 reduction to methane at an industry-level current density of 300 mA cm –2 . In conclusion, this work explores effective concepts for steering desirable reaction pathways in complex interfacial catalytic systems via modulating active site structures at the atomic level and engineering pore architectures of supports on the mesoscale to create favorable microenvironments.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Self-Assembly Interactions in Magnetite-Coated Cellulose Nanocrystals: Implications for Magnetic Hyperthermia Applications

Magnetic cellulose nanocrystal (MCNC) nanocomposites are promising sustainable and biocompatible platforms for magnetic hyperthermia; however, the molecular mechanisms governing Fe 3 O 4 adsorption and deposition onto CNCs remain poorly understood. Here, sulfated (S-CNC) and TEMPO-oxidized CNCs (T-CNC) were used to prepare nanocomposites at 1:2 and 1:4 CNC:Fe 3 O 4 mass ratios, enabling a systematic evaluation of how surface chemistry and nanoparticle loading dictate interfacial interactions and magneto-colloidal behavior. Bare magnetite nanoparticles were 21 ± 5 nm by TEM but grew to 144 ± 18 in the DLS measurement at pH 7. The S-CNC nanocomposites had hydrodynamic sizes between 144 and 210 nm, not much larger than the 140 nm long CNC rods, suggesting an enhanced dispersion stability compared to Fe3O4 alone. X-ray photoelectron spectroscopy combined with density functional theory revealed that −OH and −COOH groups drive electrostatic adsorption with charge transfer from Fe 3 O 4 to the CNC surface, while T-CNCs showed more favorable adsorption energies and evidence of covalent Fe−O bonding. Vibrating sample magnetometry demonstrated superparamagnetic behavior for all samples, with S-CNC/Fe 3 O 4 1:4 and 1:2 displaying saturation magnetizations of 78 and 77 emu/g-Fe 3 O 4 , close to the 83 emu/g of bare magnetite. The T-CNC composites showed lower (60 and 66 emu/g-Fe3O4) saturation magnetizations. Zero-field-cooled/field-cooled measurements resulted in a blocking temperature of 112 K for all samples, except T-CNC/Fe 3 O 4 1:2 (100 K). Magnetic hyperthermia studies revealed that specific absorption rate (SAR) increased with field strength and Fe 3 O 4 content; however, S-CNC/Fe 3 O 4 (1:2) achieved the highest intrinsic SAR per gram of Fe 3 O 4 (649 W/g-Fe 3 O 4 ) likely due to its anisotropy and fast magnetic relaxation. Cytotoxicity assays confirmed that all nanocomposites were nontoxic toward mammalian cells. These results establish quantitative structure−property relationships between CNC surface chemistry, interfacial bonding mechanisms, and magnetic heating performance, providing a foundation for rational design of biocompatible magnetic nanocomposites for hyperthermia and related applications.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2021

Grafting nanometer metal/oxide interface towards enhanced low-temperature acetylene semi-hydrogenation

Metal/oxide interface is of fundamental significance to heterogeneous catalysis because the seemingly “inert” oxide support can modulate the morphology, atomic and electronic structures of the metal catalyst through the interface. The interfacial effects are well studied over a bulk oxide support but remain elusive for nanometer-sized systems like clusters, arising from the challenges associated with chemical synthesis and structural elucidation of such hybrid clusters. We hereby demonstrate the essential catalytic roles of a nanometer metal/oxide interface constructed by a hybrid Pd/Bi 2 O 3 cluster ensemble, which is fabricated by a facile stepwise photochemical method. The Pd/Bi 2 O 3 cluster, of which the hybrid structure is elucidated by combined electron microscopy and microanalysis, features a small Pd-Pd coordination number and more importantly a Pd-Bi spatial correlation ascribed to the heterografting between Pd and Bi terminated Bi 2 O 3 clusters. The intra-cluster electron transfer towards Pd across the as-formed nanometer metal/oxide interface significantly weakens the ethylene adsorption without compromising the hydrogen activation. As a result, a 91% selectivity of ethylene and 90% conversion of acetylene can be achieved in a front-end hydrogenation process with a temperature as low as 44 °C.

36 MATERIALS SCIENCE↗
DOE OSTI2020

Carbon quantum dots interfacial modified graphene/silicon Schottky barrier solar cell

The two-dimensional thin film, as an effective interface modification layer to improve the power conversion efficiency (PCE) of graphene/silicon (Gr/Si) heterojunction solar cells has attracted extensive attention recently. However, the complicated manufacturing process and specialized equipment requirements impede its broad application. Herein, carbon quantum dots (CQDs) fabricated under the mild reaction condition was first time used to modify Gr/Si devices interface structure. The effects of CQDs size distributions and coating thickness on J-V characteristics and the energy band structure of Gr/CQDs/Si solar cells were systematically analyzed. The findings indicate that the PCE of resulting Gr/CQDs/Si solar cells could reach 9.97% when the thickness and sizes of CQDs interlayer are ~26 nm and 4–7 nm, without any chemical doping, which is 6.8-times PCE than that of virgin Gr/Si solar cells. The CQDs interlayer serves as both an electron blocking layer and hole transport layer to reduce the carrier recombination, leading to a lower reverse saturation current as well as a larger VOC then improved the device performance. The enhanced PCE shows that the CQDs species have the potential applications in a cost-effective photovoltaic device.

14 SOLAR ENERGY↗
DOE OSTI2024

Interfacial Reactivity-Triggered Oscillatory Lattice Strains of Nanoalloys

Understanding the structure evolution of nanoalloys under reaction conditions is vital to the design of active and durable catalysts. Herein, we report an operando measurement of the dynamic lattice strains of dual-noble-metal alloyed with an earth-abundant metal as a model electrocatalyst in a working proton-exchange membrane fuel cell using synchrotron high-energy X-ray diffraction coupled with pair distribution function analysis. Additionally, the results reveal an interfacial reaction-triggered oscillatory lattice strain in the alloy nanoparticles upon surface dealloying. Analysis of the lattice strains with an apparent oscillatory irregularity in terms of frequency and amplitude using time-frequency domain transformation and theoretical calculation reveals its origin from a metal atom vacancy diffusion pathway to facilitate realloying upon dealloying. This process, coupled with surface metal partial oxidation, constitutes a key factor for the nanoalloy's durability under the electrocatalytic oxygen reduction reaction condition, which serves as a new guiding principle for engineering durable or self-healable electrocatalysts for sustainable fuel cell energy conversion.

Wu, Zhi-Peng [State University of New York (SUNY),↗
DOE OSTI2020

Molecular polarizabilities as fingerprints of perturbations to water by ions and confinement

Perturbations to water, both by ions and confining media, have been the focus of numerous experimental and theoretical studies. Yet, several open questions remain, including the extent to which such perturbations modify the structural and dielectric properties of the liquid. Here, we present a first-principles molecular dynamics study of alkali cations in water (Li + , Na + , and K + ) as well as of water and LiCl and KCl solutions under confinement within carbon nanotubes (CNTs) of small diameter (1.1-1.5 nm). Our simulations support the view that the water structure is only modified locally in the presence of cations. We found that molecular polarizabilities are fingerprints of hydrogen bonding modifications, which occur at most up to the second solvation shell for all cations in bulk water. Under confinement, we found that the overall value of the molecular polarizability of water molecules near the surface is determined by the balance of two effects, which are quantitatively different in CNTs of different radii: the presence of broken hydrogen bonds at the surface leads to a decrease in the polarizabilities of water molecules, while the interaction with the CNT enhances polarizabilities. Interestingly, the reduction in dipole moments of interfacial water molecules under confinement is instead driven only by changes in the water structure and not by interfacial interactions. As expected, confinement effects on water molecular polarizabilities and dipole moments are more pronounced in the case of the 1.1 nm CNT.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2026

Adsorption of Mixed Micelles of Polysorbate 80 and Oleic Acid to the Air–Water Interface

The solubilization of long chain amphiphiles with limited solubility into mixed micelles composed of highly soluble surfactants plays a crucial role in modulating the stability and functionality of formulations in pharmaceutical and food systems. Subsequently, the mixed micelles adsorb from solution to the air−water surface, defining the transport mechanism of the insoluble amphiphiles to the interface. We use X-ray reflectivity to measure the composition and provide insight into the structure of these mixed monolayers, and, alongside interfacial tension measurements, we provide an understanding of how the bulk composition determines the surface composition and the dynamics of tension reduction. We use a model system consisting of an insoluble fatty acid, oleic acid (OA), and a soluble micelle-forming surfactant, polysorbate 80 (PS80). PS80 forms spherical micelles, and, above the critical micelle concentration (cmc), OA is readily solubilized inside the micelles. We show that the adsorption of PS80/OA mixed micelles to the air−water interface rapidly reduces the tension and lowers the equilibrium tension in proportion to the OA concentration. X-ray reflectivity data, fit using Parratt-slab models, quantitively demonstrates that the monolayers become enriched with OA, and we show how the OA intercalates into the PS80 monolayers.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Atomic faulting drives exceptional toughness in low thermal expansion chromium alloys

Endowing functional properties with mechanical responses in traditional metals has been a frontier topic, akin to transforming base metal into gold. Chromium and its alloys, with their functional deficiencies and limited ductility, serve as typical examples. Herein, we report a Cr96Fe4Ge1.3B1 alloy that unifies low thermal expansion (LTE, αl = 1.79 × 10-6 K-1, 200 − 315 K) with exceptional toughness (240.2 J·cm-3). The enhancement in mechanical responses is primarily attributed to layered Cr2B intermetallic precipitates, which ameliorate interfacial cohesion and simultaneously refine the grain structure. The weakened interlayer interactions within the Cr-B layers facilitate the nucleation and movement of numerous tiny stacking faults in precipitates, efficiently alleviating strain energy and resulting in marked work-hardening ability. Additionally, antiferromagnetic fluctuations in the BCC matrix contribute to the unique LTE behavior. This paves the way for the design of high-performance alloys featuring layered-symmetry precipitates.

Yu, Chengyi [University of Science and Technology ↗
DOE OSTI2025

Uncovering the re-distribution mechanism of Ni in a de-alloyed Ni-Cr alloy in molten fluorinated salts

A mechanism of Ni redeposition during dealloying corrosion of Ni-Cr is investigated. A model Ni20Cr (wt%) metal alloy was exposed to molten LiF-NaF-KF eutectic (FLiNaK) at 600 °C and at an applied potential of +2.1 VK+/K, above the critical potential for onset of dealloying. Upon extended exposure times (up to 12 h), prominent salt-filled corrosion channels emerge along grain boundaries. A unique grain boundary corrosion mechanism, with respect to the exposed faces of the grains, a central focus of this investigation, is intrinsically connected to the formation of high purity Ni-rich de-alloyed regions within the salt-filled channel. We implement microscale techniques such as energy dispersive spectroscopy (EDS) and electron backscatter diffraction (EBSD) to uncover morphological and compositional variations in relevance to the formation of bicontinuous porosity from corrosion dealloying. To rationalize our findings, a phase-field model is developed and discovers a mechanism in which dissolved Ni from one grain can be redeposited on an adjacent grain at a given difference in interfacial energies. The interaction of chemical and structural factors at the grain boundaries plays a central role in elucidating the dynamics of this phenomenon and its implications towards corrosion.

Mills, Sean H↗
DOE OSTI2026

Chemical factors controlling the behaviour of oxide cathodes in batteries

Oxide cathodes enable high-energy lithium-ion and sodium-ion batteries, with their performances fundamentally governed by three interrelated chemical factors: electronic configuration, chemical bonding, and chemical reactivity. Here, we illustrate how these factors dictate the redox energy, structural stability, ionic and electronic transport, and interfacial behavior in both layered oxide and polyanion oxide cathodes. We discuss how crystal-field effects and octahedral-site stabilization energies influence cation migration, and how inductive effects tune bond covalency and operating voltages. We also explain how chemical bonding governs thermal stability, gas evolution, and first-cycle capacity loss, and how alignment of transition-metal redox band with the oxygen 2p band determines electrolyte reactivity. Comparison between lithium and sodium layered oxides further reveals how differences in Li-O and Na-O bond ionicity affect chemical reactivity. Finally, we outline strategies including compositional tuning, surface doping, and electrolyte optimization, and emphasize how high-throughput, data-driven approaches in guiding the design of next-generation oxide cathodes.

25 ENERGY STORAGE↗
DOE OSTI2020

Spin–orbit torques in structures with asymmetric dusting layers

Current-induced spin–orbit torques (SOTs) in heavy metal/ferromagnet heterostructures have emerged as an efficient method for magnetization switching with applications in nonvolatile magnetic memory and logic devices. However, experimental realization of SOT switching of perpendicular magnetization requires an additional inversion symmetry breaking, calling for modifications of the conventional SOT heterostructures. In this work, we study SOTs and deterministic switching of perpendicular magnetization by inserting different asymmetric dusting layers at the heavy metal/ferromagnet interface. Similar to the previous works with lateral structural asymmetry, we study the emergence of current-induced perpendicular effective magnetic fields (H z eff ). By examining three different material combinations of heavy metal/dusting layers (W/IrMn, Pt/IrMn, and W/Ta), we shed light on the origins of H z eff ; we show that H z eff is generically created in all the studied asymmetric structures, has a close correlation with the interfacial magnetic anisotropy, and is independent of the signs of spin Hall angles of the materials. Furthermore, we show that the induction of H z eff enables field-free deterministic SOT switching of perpendicular magnetization. Our results can be used in designing SOT heterostructures for practical applications in nonvolatile technologies.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗
DOE OSTI2023

Autonomous alignment and healing in multilayer soft electronics using immiscible dynamic polymers

Self-healing soft electronic and robotic devices can, like human skin, recover autonomously from damage. While current devices use a single type of dynamic polymer for all functional layers to ensure strong interlayer adhesion, this approach requires manual layer alignment. In this study, we used two dynamic polymers, which have immiscible backbones but identical dynamic bonds, to maintain interlayer adhesion while enabling autonomous realignment during healing. These dynamic polymers exhibit a weakly interpenetrating and adhesive interface, whose width is tunable. When multilayered polymer films are misaligned after damage, these structures autonomously realign during healing to minimize interfacial free energy. Finally, we fabricated devices with conductive, dielectric, and magnetic particles that functionally heal after damage, enabling thin-film pressure sensors, magnetically assembled soft robots, and underwater circuit assembly.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2019

Mesoscale Design of Magnetoelectric Heterostructures and Nanocomposites

Multiferroic materials have a coexistence of at least two ferroic orders. The coupling interaction between the different order parameters can produce new phenomena, such as the magnetoelectric (ME) effect. The ME response is the appearance of an electric polarization P upon applying a magnetic field H, and/or vice versa. Magnetoelectricity has been observed as an intrinsic effect in some natural materials at low temperature; however, such single phase materials suffer from extremely weak ME exchange. Better alternatives are two-phase composites consisting of magnetostrictive and piezoelectric phases, which have been shown to have large ME coefficients. Said composites exploit a unique product ME tensor property that depends upon the individual strictions of the piezoelectric and magnetostrictive phases, the elastic stiffness and integrity of the interphase interfaces, the phase distribution and the dimensionality of its connectivity, and any elastic constraint; amongst other things. This research program between D. Viehland PI and S.Priya at Virginia Tech investigated the mesoscale physics and chemistry of such two-phase ME heterostructures. The results of the proposed research are relevant to new generations of multifunctional materials involving heterogeneous components. How the product ME property be optimized? The answers lies with the interphase-interfaces, where the atomic layers coordinate stress transfer from one phase to another. It was the primary goal of this research program to discover such fundamental relationship for two phase ME heterostructures and nanocomposites. This research program integrated all the components required to fully investigate the ME phenomenon: starting from synthesis of nanomaterials with diversified interfacial characteristics; to full electrical, magnetic, and structural characterizations.

36 MATERIALS SCIENCE↗
NASA NTRS2007

Resonant Tunneling Spin Pump

The resonant tunneling spin pump is a proposed semiconductor device that would generate spin-polarized electron currents. The resonant tunneling spin pump would be a purely electrical device in the sense that it would not contain any magnetic material and would not rely on an applied magnetic field. Also, unlike prior sources of spin-polarized electron currents, the proposed device would not depend on a source of circularly polarized light. The proposed semiconductor electron-spin filters would exploit the Rashba effect, which can induce energy splitting in what would otherwise be degenerate quantum states, caused by a spin-orbit interaction in conjunction with a structural-inversion asymmetry in the presence of interfacial electric fields in a semiconductor heterostructure. The magnitude of the energy split is proportional to the electron wave number. Theoretical studies have suggested the possibility of devices in which electron energy states would be split by the Rashba effect and spin-polarized currents would be extracted by resonant quantum-mechanical tunneling.

Ting, David Z.↗
NASA NTRS2004

Electron-Spin Filters Based on the Rashba Effect

Semiconductor electron-spin filters of a proposed type would be based on the Rashba effect, which is described briefly below. Electron-spin filters more precisely, sources of spin-polarized electron currents have been sought for research on, and development of, the emerging technological discipline of spintronics (spin-based electronics). There have been a number of successful demonstrations of injection of spin-polarized electrons from diluted magnetic semiconductors and from ferromagnetic metals into nonmagnetic semiconductors. In contrast, a device according to the proposal would be made from nonmagnetic semiconductor materials and would function without an applied magnetic field. The Rashba effect, named after one of its discoverers, is an energy splitting, of what would otherwise be degenerate quantum states, caused by a spin-orbit interaction in conjunction with a structural-inversion asymmetry in the presence of interfacial electric fields in a semiconductor heterostructure. The magnitude of the energy split is proportional to the electron wave number. The present proposal evolved from recent theoretical studies that suggested the possibility of devices in which electron energy states would be split by the Rashba effect and spin-polarized currents would be extracted by resonant quantum-mechanical tunneling. Accordingly, a device according to the proposal would be denoted an asymmetric resonant interband tunneling diode [a-RITD]. An a-RITD could be implemented in a variety of forms, the form favored in the proposal being a double-barrier heterostructure containing an asymmetric quantum well. It is envisioned that a-RITDs would be designed and fabricated in the InAs/GaSb/AlSb material system for several reasons: Heterostructures in this material system are strong candidates for pronounced Rashba spin splitting because InAs and GaSb exhibit large spin-orbit interactions and because both InAs and GaSb would be available for the construction of highly asymmetric quantum wells. This mate-rial system affords a variety of energy-band alignments that can be exploited to obtain resonant tunneling and other desired effects. The no-common-atom InAs/GaSb and InAs/AlSb interfaces would present opportunities for engineering interface potentials for optimizing Rashba spin splitting.

Ting, David Z.-Y.↗
DOE OSTI2021

Mesoscale Frank–Kasper Crystal Structures from Dendron Assembly by Controlling Core Apex Interactions

Single-component polymeric materials open up a great potential for self-assembly into mesoscale complex crystal structures that are known as Frank-Kasper (FK) phases. Predicting the packing structures of the soft-matter spheres, however, remains a challenge even when the molecular design is precisely known. Here, we investigate the role of the molecules' enthalpic interaction in determining the low-symmetry crystal structures. To this end, we synthesize architecturally asymmetric dendrons by varying their apex functionalities and examine the packing structures of the second-generation (G2) dendritic wedges. Our work shows that weakening the hydrogen bonding of the dendron apex makes the particles softer and smaller, and leads to the formation of various FK structures at lower temperatures, including the new observation of a FK C14 phase in the cone-shaped dendron systems. As a consequence of the free energy balance between the particle's interfacial tension and the chain's stretching, various packing structures are mainly tuned by designing the hydrogen bonding interaction.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

On the Interfacial Behavior of Catenated Poly(l-lactide) at the Air–Water Interface

Interfacial properties of polymeric materials are significantly influenced by their architectural structures and spatial features, while such a study of topologically interesting macromolecules is rarely reported. Here, we reported, for the first time, the interfacial behavior of catenated poly(l-lactide) (C-PLA) at the air–water interface and compared it with its linear analogue (L-PLA). The isotherms of surface pressure–area per repeating unit showed significant interfacial behavioral differences between the two polymers with different topologies. Isobaric creep experiments and compression–expansion cycles also showed that C-PLA demonstrated higher stability at the air–water interface. Interestingly, when the films at different surface pressures were transferred via the Langmuir–Blodgett method, successive atomic force microscopy imaging displayed distinct nanomorphologies, in which the surface of C-PLA exhibited nanofibrous structures, while that of the L-PLA revealed a smoother topology with less fiber-like structures.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗