Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ISOTOPE RATIO”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Skeletal Kinetics Reduction for Astrophysical Reaction Networks

A novel methodology is developed to extract accurate skeletal reaction models for nuclear combustion. Local sensitivities of isotope mass fractions with respect to reaction rates are modeled based on the forced optimally time-dependent (f-OTD) scheme. These sensitivities are then analyzed temporally to generate skeletal models. The methodology is demonstrated by conducting skeletal reduction of constant density and temperature burning of carbon and oxygen relevant to Type Ia supernovae (SNe Ia). The 495-isotopes Torch model is chosen as the detailed reaction network. A map of maximum production of 56 Ni in SNe Ia is produced for different temperatures, densities, and proton-to-neutron ratios. The f-OTD simulations and the sensitivity analyses are then performed with initial conditions from this map. A series of skeletal models are derived and their performances are assessed by comparison against currently existing skeletal models. Previous models have been constructed intuitively by assuming the dominance of α-chain reactions. The comparison of the newly generated skeletal models against previous models is based on the predicted energy release and 44 Ti and 56 Ni abundances by each model. The consequences of ye ≠ 0.5 in the initial composition are also explored where ye is the electron fraction. The simulated results show that 56 Ni production decreases by decreasing ye as expected, and that the 43 Sc is a key isotope in proton and neutron channels toward 56 Ni production. It is shown that an f-OTD skeletal model with 150 isotopes can accurately predict the 56Ni abundance in SNe Ia for ye ≲ 0.5 initial conditions.

79 ASTRONOMY AND ASTROPHYSICS↗
DOE OSTI2023

Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment (BIRDIE) (Field Campaign Report)

The Beryllium Isotopes in Rainfall for Stratospheric-Tropospheric Exchange Dynamics Experiment or BIRDIE was a precipitation collection campaign designed to measure cosmogenic isotopes of beryllium in rainfall and other forms of precipitation across the U.S. Department of Energy Atmospheric Radiation Measurement (ARM) user facility’s Southern Great Plains (SGP) atmospheric observatory. Precipitation samples were collected over three weeks (May 21-June 10, 2022) at 11 SGP sites across a 120-km 2 domain in northern and central Oklahoma. The field campaign targeted summertime convection rain events. We aimed to capture any spatial and/or temporal variability in the concentrations of beryllium-10 (10Be) and beryllium-7 (7Be) across the ARM SGP site during these rainfall events. The ratio of 10Be to 7Be (10/7Be) has been shown to be a powerful tracer for transport processes in the stratosphere-troposphere exchange (STE) system (e.g., Koch and Rind 1998). Any observed variability is analyzed to see if it could be linked to STE processes, including overshooting of deep convection clouds that penetrate the lower stratosphere. Six wet weather system events were collected within our three-week span. Five out of six of these rainfall events are classified as moderately to strongly convective. Those events are studied in more detail. The five systems also follow each other over a short period of 11 days. In our rainfall samples we observed spatial and event variability in the concentrations of beryllium-10 and -7 that resulted in variability of 10/7Be ratios. Each weather event appeared to exhibit a unique 10/7Be pattern across the domain that was not directly linked to storm total precipitation amount. To better understand the causes for this spatial variability, cloud characteristics in the domain were looked at to assess cloud type, cloud height, and depth information. We also ran Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model back trajectories to identify possible air mass and moisture origins across our events. Detailed analysis is ongoing. The purpose of this technical report is to provide background on using cosmogenic isotopes as atmospheric tracers, describe the experimental design, and present the beryllium concentration and ratio data. Lastly, we note that BIRDIE coincided with two other deep convection field campaigns in the area: The National Aeronautics and Space Administration (NASA)’s Dynamics and Chemistry of the Summer Stratosphere (DCOTSS) experiment (https://dcotss.org/) centered in Salina, Kansas, and the Targeted Observation by Radars and (uncrewed aerial systems) UAS of Supercells (TORUS) experiment (https://catalog.eol.ucar.edu/torus_2022) across the U.S. Central Plains. Additionally, a Lawrence Livermore National Laboratory ( LLNL) team at DCOTSS attempted to measure 10Be/7Be ratios on aerosols collected in situ in the lower and mid-stratosphere over Kansas using high-altitude balloons. Precipitation samples were also collected on the ground in Salina, Kansas.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Characterization of actinide abundances and isotopic compositions by HR-ICP-MS. Part 2: Results from actinide doping studies

Previously, we presented actinide isotopic and elemental data from fallout melt glass that was measured using high-resolution inductively coupled plasma mass spectrometry (HR-ICP-MS). Direct comparison between these measurements and ‘gold standard’ data obtained by multi-collector ICP-MS showed broad overlap, indicating that HR-ICP-MS is a potentially valuable technique for producing actinide elemental and isotopic data on a relatively rapid timescale. To test the usefulness of this technique further, we doped varying amounts of uranium certified reference materials (CRMs) into a rhyolitic rock standard to establish the effects of uranium concentration and isotopic composition on the accuracy of uranium isotopic analyses by HR-ICP-MS. This also enabled us to quantify peak tailing effects from 238 U on the measurement of 239 Pu and 237 Np, which in turn allows us to constrain correction factors based on measured 237 Np/ 238 U and 239 Pu/ 238 U ratios. A second doping study involved the addition of a mixed actinide standard into three samples with different matrix compositions (termed soil, city, and seawater) to assess whether sample chemistry affects the accuracy and precision of these analyses. Results suggest that this is not the case. Systematic offsets were not observed in elemental or isotopic data derived from the three matrix samples. Results indicate that useful actinide isotopic data can be obtained from whole rock solutions by HR-ICP-MS. Our findings also have implications for solid sampling techniques such as laser ablation ICP-MS, which do not require sample dissolution.

38 RADIATION CHEMISTRY, RADIOCHEMISTRY, AND NUCLEA↗
DOE OSTI2025

Secondary corundum‐bearing assemblages in Allende Ca,Al‐rich inclusions: Mineralogy, petrology, oxygen, and aluminum–magnesium isotope systematics

Here, we report on the mineralogy, petrology, oxygen, and aluminum–magnesium isotopic systematics of the secondary corundum-bearing assemblages in type B CAIs 3529Z and 3529G and fluffy type A (FTA) CAI ALH-2 from Allende (CV > 3.6). In 3529Z and 3529G, 2–5 μm-sized euhedral-to-subhedral corundum grains associate with secondary alumoåkermanite [(Ca,Na) 2 AlSi 2 O 7 ], grossular, spinel, grossite, celsian, kushiroite, and wadalite. In ALH-2, 2–5 μm-sized euhedral-to-subhedral corundum grains associate with secondary grossular, nepheline, spinel, and kushiroite. In 3529Z and 3529G, corundum and associated secondary grossite, spinel, alumoåkermanite, grossular, and kushiroite have similar 16 O-poor compositions (Δ 17 O = −2.2 ± 1.5‰); primary spinel is 16 O-rich (Δ 17 O ~ −23‰); Al,Ti-diopside shows a range of Δ 17 O (from ~ −24‰ to ~ −15‰); anorthite and melilite are 16 O-depleted to various degrees (−6.5‰ ≤ Δ 17 O ≤ −4.5‰ and Δ 17 O = −2.7 ± 0.8‰, respectively). In ALH-2, corundum shows a range of Δ 17 O, from ~ −9‰ to ~ −1‰; primary hibonite and spinel are 16 O-rich (Δ 17 O ~ −23‰); melilite and perovskite are 16 O-poor (Δ 17 O = −2.6 ± 1.5‰ and −3.1 ± 1.3‰, respectively). On the Al-Mg isotope diagram ( 26 Mg* versus 27 Al/ 24 Mg), primary Al,Ti-diopside, hibonite, melilite, and spinel in the Allende CAIs studied along the canonical isochron with inferred initial 26 Al/ 27 Al ratio [( 26 Al/ 27 Al) 0 ] of ~5 × 10 −5 . All secondary minerals have resolved excesses of 26 Mg*: alumoåkermanite, corundum, and grossite plot below the canonical isochron, whereas most spinel analyses plot above it. An internal isochron defined by the coexisting secondary corundum and alumoåkermanite in 3529Z has ( 26 Al/ 27 Al) 0 = (7.5 ± 2.6) × 10 −7 . We conclude that the corundum-bearing assemblages in Allende CAIs resulted from metasomatic alteration of primary melilite and anorthite, ~4–5 Ma after their crystallization. Metasomatic alteration of CAIs in the Allende parent asteroid by an aqueous fluid having Δ 17 O of ~ −3 ± 2‰ modified the O-isotope composition of their primary melilite, anorthite, and Ti-rich pyroxene; O-isotope compositions of primary hibonite, spinel, and low-Ti pyroxene escaped this modification.

Geosciences↗
DOE OSTI2024

In-beam spectroscopy reveals competing nuclear shapes in the rare isotope 62 Cr

In recent decades, rareisotope facilities have enabled the study of short-lived, neutron-rich nuclei. Their measured properties indicate that shell structure changes in the regime of unbalanced neutron-to-proton ratios compared to that of stable nuclei. In the so-called islands of inversion in the nuclear chart – around the neutron-rich nuclei 32 Mg, 42 Si and 64 Cr, for example – the textbook shell-model picture predicts the presence of spherical shapes due to the respective magic neutron numbers of 20, 28, and 40 of these nuclei. However, nuclei in these regions turn out to be deformed in their ground states. Another hallmark of these islands is shape coexistence, where a nucleus assumes different shapes with excitation energy. Furthermore, we present evidence for this phenomenon from the observation of an excited 0 + state in 62 Cr, two neutrons away from the heart of the island of inversion around neutron number N = 40. We use large-scale shell-model calculations to interpret the results and report extrapolations for the doubly-magic nucleus 60 Ca.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗
DOE OSTI2025

Glacial‐Interglacial and Millennial‐Scale Changes in Nitrous Oxide Emissions Pathways and Source Regions

During the transition from the Last Glacial Maximum (LGM) to the Holocene, the atmospheric N 2 O mole fraction increased by 80 nmol mol −1 . Using ice core measurements of N 2 O isotopomer ratios, we show that this increase was driven by increases in both nitrification and denitrification, with the relative partitioning between both production pathways depending on the assumed isotopic end-member source signatures. Similarly, we also attribute a 35 nmol mol −1 N 2 O mole fraction increase during the Heinrich Stadial 4/Dansgaard Oeschger 8 (HS4/DO8) millennial-scale event to increases in both N 2 O production pathways. In contrast, the 25 nmol mol −1 N 2 O mole fraction decrease during the Younger Dryas was driven almost exclusively by a decrease in nitrification. The deglacial and HS4/DO8 increases in N 2 O production occurred in both marine and terrestrial environments, with the terrestrial source responding faster to warming by about two centuries. Constraints on changes in nitrification and denitrification emissions are robust and consistent with previous studies showing the sensitivity of N 2 O emissions to abrupt Northern Hemisphere warming. This study demonstrates for the first time the importance of both denitrification and nitrification pathways in driving source changes. Absolute emissions are more uncertain due to uncertainty about source isotopomer signatures. For instance, the contribution of denitrification to emissions at the LGM shifts from (65 ± 10) % to (91 ± 6) % when factoring in isotope enrichment due to partial reduction of N 2 O to N 2 during denitrification. Reducing uncertainty in source signatures will increase the power of ice core N 2 O isotope records in deducing environmental change.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Elephant range and population, strontium isotopes, and genetics combine to give local-scale specificity to ivory hotspot tracking

We use Sr isotopes to increase the precision of DNA-based origin estimates of wildlife products. Population information is used to develop Sr isotope Elephant Polygons that are overlaid onto the region of origin identified by DNA assignment to determine the sources of seized ivory samples. Our approach is cognizant of isotope mixing due to isotope turnover within animals and also of the large home range of elephants or other mobile species. Genetic information from 3 different law enforcement ivory seizures suggests a region of origin confined to Kenya and Tanzania in eastern Africa. We determine characteristic 87 Sr/ 86 Sr ratios for each of 25 different Elephant Polygons within this region using analyses of more the 600 known-origin reference samples. Using both the 87 Sr/ 86 Sr ratios of the seized ivory samples and elephant population estimates from individual Elephant Polygons we find that at least 75 % of the samples likely came from a single Elephant Polygon which includes the Tsavo National Parks in Kenya and the Mkomazi National Park in Tanzania. A few samples may have come from other regions, most likely from Tanzania. This study illustrates the value of combining genetics, isotope geochemistry, and population surveys in wildlife forensics studies.

Africa↗
DOE OSTI2020

In Situ Oxygen Isotope Determination in Serpentine Minerals by SIMS: Addressing Matrix Effects and Providing New Insights on Serpentinisation at Hole BA1B (Samail ophiolite, Oman)

The ability to constrain the petrogenesis of multiple serpentine generations recorded at the microscale is crucial for estimating the extent and conditions of modern versus fossil serpentinisation in ophiolites. To address matrix bias effects during oxygen isotope analysis by SIMS, we present the first investigation analysing antigorite in the compositional range Mg# = 77.5–99.5 mole %, using a CAMECA IMS–1280 secondary ion mass spectrometer. Spot–to–spot homogeneity is ≤ 0.5‰ (2s) for the new antigorite reference materials. The relative bias between antigorite reference materials with different Mg/Fe ratios is described by a second order polynomial, and a maximum difference in bias of ~ 1.8‰ was measured for Mg# ~ 78 to 100. We observed a bias up to ~ 1.0‰ between lizardite and antigorite attributed to their different crystal structure. Orientation effects up to ~ 1‰ were observed in chrysotile. The new analytical protocol allowed the identification of oxygen isotope zoning up to ~ 7‰ in serpentine minerals from two serpentinites recovered from an area of active serpentinisation in the Samail ophiolite. Furthermore in situ analysis is capable of resolving isotopic heterogeneity that may directly reflect changes in the physical and chemical conditions of multiple serpentinisation events in the Samail ophiolite.

47 OTHER INSTRUMENTATION↗
DOE OSTI2021

Cumulative short-lived photofission product yields for nuclear forensic application

Experiments have long been carried out with linear accelerator (linac) produced bremsstrahlung X-rays to study high-energy photon-induced fission, known as “photofission”. One benefit of photofission, when compared with neutron-induced fission, is the ability to investigate fundamental physics of fission at excitation energies lower than what is possible with neutrons [1]. Absorption of an incident neutron results in a compound nucleus with an excitation energy at least equal to the neutron binding energy; thus, the lowest energy region of the fission barrier cannot be studied. Fission product yield distributions are dependent on the incident particle energy and the target nucleus mass. They are generally represented by a double-humped curve, with low and high mass “peaks” and an intermediate mass “valley”. As incident particle energy increases, the excitation energy of the nucleus increases, thereby increasing the overall yield of isotopes in the valley with respect to the two maxima or peaks of the fission product curve [3]. Photofission is most probable for incident photons around 14 MeV due to the giant dipole resonance. Induced photofission around this energy results in a fission product yield distribution that resembles 14 MeV DT neutron fission more than thermal or fast (500 keV) neutron fission. In post-detonation nuclear forensics, the peak-to-valley ratio of the fission product yield curve could be used for characterizing device type by providing an indication of the neutron energy spectrum that had induced fission (e.g., 500 keV vs. 14 MeV). The goal of this work is to improve nuclear data for isotopes of interest in nuclear forensics and special nuclear material (SNM) detection, specifically the fission product yield data via photofission experiments for the isotopes of 238U and 232Th. Photofission has been proposed as a less costly and more flexible production method for the valley isotopes that are representative of DT neutron fission product yield distributions, which would benefit nuclear forensics exercises in testing for analysis techniques. Natural uranium and thorium targets were irradiated with bremsstrahlung photons (nominal endpoint energies of 8, 14, and 20 MeV), generated via impingement of high-energy electrons on a tungsten electron-to-photon radiator. Gamma-ray spectroscopy was used to observe and identify the decay of the resulting fission products. The photofission yields of 102 fission products were measured for the set of the 238U and 232Th targets at the three bremsstrahlung X-ray endpoint energies 8, 14, and 20 MeV. These fragments included masses ranging from A=84 to A=144, with half-lives as short as 1.07 seconds.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2021

Direct evidence for eoarchean iron metabolism?

Metasedimentary rocks from Isua, West Greenland (> 3,700 million years old) contain carbonaceous compounds, compatible with a biogenic origin. The metamorphic mineral assemblage with garnet and quartz intergrowths contains layers of carbonaceous inclusions contiguous with carbon–rich sedimentary beds in the host rock. Previous studies on Isua rocks focused on testing the biogenic origin of the carbonaceous material, but here we searched for evidence which could provide new insights into the nature of the life that generated this carbonaceous material. We studied material trapped in inclusions armoured within quartz grains inside garnet porphyroblasts by non–destructive ptychographic X–ray nanotomography (PXCT). The 3D electron density maps generated by PXCT were correlated with maps from X–ray fluorescence tomography and micro–Raman spectroscopy. We found that the material trapped inside inclusions in the quartz grains consist of disordered carbon material encasing domains of iron–rich carbonaceous material. These results corroborate earlier claims for biogenic origins and are compatible with relics of metamorphosed biological material originally containing high iron/carbon ratios, comparable to ratios found in most extant organisms. Finally, these iron–rich domains represent the oldest evidence for organic iron complexes in the geologic record and are consistent with Fe–isotopic evidence for metabolic iron fractionation in > 3,700 Ma Isua banded iron formation.

58 GEOSCIENCES↗
DOE OSTI2022

Gamma-ray spectrometry analysis methods for radioisotope dissolution and mixing for nuclear forensics applications

We report the production of surrogate nuclear explosive debris involves the dissolution of irradiated fissile material, elemental isolation, and recombination based on required fission product ratios. Gamma-ray spectrometry is used following each step to assess the radioactive fission product inventory. A high-purity germanium detector is used to measure each sample, and the detector efficiencies are determined prior to sample measurements. Through radiochemical techniques, elements are isolated and recombined into samples with specific fission product ratios. As a result, a matrix-based approach can account for imperfect chemical separations to calculate the proper mixture volumes to obtain intended volatile-to-refractory fission product ratios, or R-values.

07 ISOTOPE AND RADIATION SOURCES↗
DOE OSTI2026

Simulation to a Newborn Supernova Remnant from a Low-mass Iron Core Star

Supernova remnant observations show a high degree of asymmetry, mixing, and inhomogeneity. These asymmetries are seeded during the early seconds of the explosion and are further enhanced and modified as the shock and ejecta move through the stellar progenitor and into the circumstellar medium. We present simulations of a 9.6 M⊙ zero-metallicity progenitor initialized after shock revival and evolved for several years when the ejecta is in the circumstellar medium. A suite of 1D and 2D simulations examines the effects of neutron-star wind and radioactive decay heating. In 1D, decay heating forms a low-density bubble that suppresses the reverse shock. While in 2D, the heating is localized to metal-rich pockets, inflating them and compressing the surrounding material into dense shells. In 3D, the neutron-star wind and decay heating modify the plume morphology, producing more large-scale structures. The extended plume morphology leads to an asymmetrical shock breakout. After breakout, the leading plumes cannot keep up with the shock front, resulting in deceleration and fragmentation by the reverse shock while retaining the large-scale asymmetry. The projected ejecta morphology and velocities are strongly viewing angle dependent. The relatively uniform metal-rich distribution does not resemble the strongly inhomogeneous ejecta structure of Cas A. The 160-isotope decay network shows that 24.4% of the radioactive heating comes from decay chains other than the canonical 56Ni chain. The low explosion energy, low 56Ni yield, and Ni/Fe ratio greater than unity suggest an observational signature similar to an electron capture supernova.

Neopane, Sudarshan [University of Tennessee (UT)]↗
DOE OSTI2020

Measuring multiple cosmogenic nuclides in glacial cobbles sheds light on Greenland Ice Sheet processes

The behavior of the Greenland Ice Sheet during the Pleistocene remains uncertain due to the paucity of evidence predating the Last Glacial Maximum. In this study, we employ a novel approach, cosmogenic nuclide analysis of individual subglacially-derived cobbles, which allows us to make inferences about ice sheet processes and subglacial erosion. From three locations in western Greenland, we collected 86 cobbles from the current ice sheet margin and nine cobbles exposed on the modern proglacial land surface. We measured the concentration of in situ 10 Be in all cobbles (n = 95) and 26 Al and 14 C in a subset (n = 14). Cobbles deposited during Holocene retreat have 10 Be exposure ages generally consistent with the timing of ice retreat determined by other methods. Conversely, most of the 86 subglacial cobbles contain very low concentrations of 10 Be (median 1.0×10 3 atoms g –1 ), although several have ~10 4 and one has ~10 5 atoms g –1 . The low concentrations of 10 Be in most subglacial cobbles imply that their source areas under the Greenland Ice Sheet are deeply eroded, preserving minimal evidence of surface or near-surface exposure. The presence of measurable 14 C in ten of the cobbles requires that they experienced cosmogenic nuclide production within the past ~30 ka; however, 14 C/ 10 Be ratios of ~6 suggest that nuclide production occurred during shielding by overlying material. Only two of the 86 subglacial cobbles definitively have cosmogenic nuclide concentrations consistent with prior surface exposure. Overall, isotopic analysis of subglacial cobbles indicates that much of western Greenland's subglacial landscape is characterized by deep erosion and minimal subaerial exposure.

58 GEOSCIENCES↗
DOE OSTI2021

A novel experimental system for the KDK measurement of the 40 K decay scheme relevant for rare event searches

Potassium-40 ( 40 K) is a long-lived, naturally occurring radioactive isotope. The decay products are prominent backgrounds for many rare event searches, including those involving NaI-based scintillators. 40 K also plays a role in geochronological dating techniques. The branching ratio of the electron capture directly to the ground state of argon-40 has never been measured, which can cause difficulty in interpretingcertain results or can lead to lack of precision depending on the field and analysis technique. Additionally, the KDK (Potassium (K) Decay (DK)) collaboration is measuring this decay. A composite method has a silicon drift detector with an enriched, thermally deposited 40 K source inside the Modular Total Absorption Spectrometer. This setup has been characterized in terms of energy calibration, gamma tagging efficiency, live time and false negatives and positives. A complementary, homogeneous, method is also discussed; it employs a KSr 2 I 5 :Eu scintillator as source and detector.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗
DOE OSTI2025

Microtearing stability and turbulence in the pedestal: Linear gyrokinetics, reduced models, and nonlinear turbulent transport

Microtearing modes can play a crucial role in electron heat transport in tokamak plasmas, affecting both energy confinement and overall performance. This study investigates microtearing modes (MTM) stability and turbulence in a JET pedestal through gyrokinetic simulations using the Gene code, complemented by a reduced eigenvalue model. The focus is on how MTM properties depend on key plasma parameters, including collisionality and plasma beta β—the ratio of plasma pressure to magnetic pressure—the normalized toroidal wavenumber k y ρ s ⁠, where ρ s denotes the ion sound gyroradius (typically a few millimeters in edge plasmas) and isotope mass. Collisionality enhances MT growth rates, while increasing β leads to a shift from MTMs to kinetic-ballooning modes, typically for k y ρ s ⁠, where ρ s ≲ 0.2⁠. A purely collisionless branch of MTMs persists at low k y ρ s ⁠, where ρ s with distinctive properties including non-negligible particle flux and ion thermal transport. Isotope mass scans reveal modest reduction of MTM growth rates as ion mass decreases. Nonlinear simulations produce experimentally relevant transport levels. Numerical experiments turning off zonal flows and fields identify the critical role of zonal flows and zonal fields in regulating MTM turbulence. Their removal leads to a significant increase in electron heat flux. These findings provide new insight into MTM-driven transport and its impact on tokamak confinement and lay a foundation for reduced modeling and predictive capabilities.

Electrostatics↗
DOE OSTI2026

A high-efficiency cryogenic neutron spin flipper for IMAGINE-X at the high flux isotope reactor

The Laue neutron macromolecular crystallography beamline, IMAGINE, at the High Flux Isotope Reactor (HFIR) is undergoing a major upgrade to incorporate the dynamic nuclear polarization (DNP) technique. Upon completion, the new IMAGINE-X instrument is expected to enhance the signal-to-noise ratio of the diffraction data by an order of magnitude. To take full advantage of the benefits of DNP, both a highly polarized neutron beam and a high-efficiency neutron spin flipper are required. We have developed a compact cryogenic spin flipper utilizing the Meissner effect in high-Tc yttrium–barium–copper–oxide superconducting films. The flipper has been successfully tested at two HFIR neutron development beamlines, Larmor and Poplar, with neutron wavelengths of 5.3 and 2.4 Å respectively. At Larmor, a flipping efficiency of 0.995 ± 0.004 was achieved for 5.3 Å neutrons, and at Poplar, efficiency of up to 0.9987 ± 0.0004 was obtained for 2.4 Å neutrons. Both tests demonstrated the flipper’s excellent performance and suitability for integration into IMAGINE-X.

Fu, Sichao [Oak Ridge National Laboratory (ORNL), ↗
DOE OSTI2022

Permafrost Active Layer Microbes From Ny Ålesund, Svalbard (79°N) Show Autotrophic and Heterotrophic Metabolisms With Diverse Carbon-Degrading Enzymes

The active layer of permafrost in Ny Ålesund, Svalbard (79°N) around the Bayelva River in the Leirhaugen glacier moraine is measured as a small net carbon sink at the brink of becoming a carbon source. In many permafrost-dominating ecosystems, microbes in the active layers have been shown to drive organic matter degradation and greenhouse gas production, creating positive feedback on climate change. However, the microbial metabolisms linking the environmental geochemical processes and the populations that perform them have not been fully characterized. In this paper, we present geochemical, enzymatic, and isotopic data paired with 10 Pseudomonas sp. cultures and metagenomic libraries of two active layer soil cores (BPF1 and BPF2) from Ny Ålesund, Svalbard, (79°N). Relative to BPF1, BPF2 had statistically higher C/N ratios (15 ± 1 for BPF1 vs. 29 ± 10 for BPF2; n = 30, p < 10 –5 ), statistically lower organic carbon (2% ± 0.6% for BPF1 vs. 1.6% ± 0.4% for BPF2, p < 0.02), statistically lower nitrogen (0.1% ± 0.03% for BPF1 vs. 0.07% ± 0.02% for BPF2, p < 10 –6 ). The d 13 C values for inorganic carbon did not correlate with those of organic carbon in BPF2, suggesting lower heterotrophic respiration. An increase in the δ 13 C of inorganic carbon with depth either reflects an autotrophic signal or mixing between a heterotrophic source at the surface and a lithotrophic source at depth. Potential enzyme activity of xylosidase and N-acetyl-β-D-glucosaminidase increases twofold at 15°C, relative to 25°C, indicating cold adaptation in the cultures and bulk soil. Potential enzyme activity of leucine aminopeptidase across soils and cultures was two orders of magnitude higher than other tested enzymes, implying that organisms use leucine as a nitrogen and carbon source in this nutrient-limited environment. Besides demonstrating large variability in carbon compositions of permafrost active layer soils only ∼84 m apart, results suggest that the Svalbard active layer microbes are often limited by organic carbon or nitrogen availability and have adaptations to the current environment, and metabolic flexibility to adapt to the warming climate.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2024

Enhancing Low-Temperature Syngas Production via Surface Tailoring of Supported Intermetallic Nanocatalysts

An active and coke-resistant silica-encapsulated intermetallic Ni 3 Zn nanoparticle catalyst was developed for low-temperature (450 °C) dry reforming of methane (DRM). The catalyst exhibited a remarkable 4-fold increase in activity (4.5 s –1 ) with over 99% CO selectivity and 3 orders of magnitude less carbonaceous species and demonstrated remarkable stability (70 h) compared to that of a monometallic Ni catalyst. Here, the key is the combined effect of surface ensemble structure and electronic interaction modulation through the surface composition tailoring achieved by off-stoichiometric Ni and Zn loading in controlling surface chemistry for achieving different activities and H 2 /CO ratios. Characterized by ion spectroscopy, X-ray photoelectron spectroscopy, and the neutron pair distribution function, it was revealed that paired Ni δ – –Zn δ+ active sites are crucial for DRM. Transient infrared spectroscopy and isotopic analysis uncovered the synergistic effect of Ni δ – –Zn δ+ sites in activating C–H bonds and dissociating CO 2 to prevent coke formation under low-temperature conditions.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗