Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “INDIUM”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Etching characteristics and mechanism of indium tin oxide films in an inductively coupled HBr/Ar plasma

The investigations of etch characteristics and mechanisms for indium tin oxide (In{sub 2}O{sub 3}){sub 0.9}:(SnO{sub 2}){sub 0.1} (ITO) thin films using HBr/Ar inductively coupled plasma were carried out. The ITO etch rate was measured in the range of 0%-100% Ar in the HBr/Ar mixture at fixed gas pressure (6 mTorr), input power (700 W), and bias power (200 W). Plasma parameters and composition were examined with a combination of plasma diagnostics by double Langmuir probe and global (zero-dimensional) plasma model. It was found that the ITO etch rate follows the behavior of Br atom flux but contradicts with that for H atoms and positive ions. This suggests that the ITO etch process is not limited by the ion-surface interaction kinetics and appears in the reaction-rate-limited etch regime with the Br atoms as the main chemically active species.

36 MATERIALS SCIENCE↗

Flexible indium zinc oxide/Ag/indium zinc oxide multilayer electrode grown on polyethersulfone substrate by cost-efficient roll-to-roll sputtering for flexible organic photovoltaics

The authors describe the preparation and characteristics of flexible indium zinc oxide (IZO)-Ag-IZO multilayer electrodes grown on flexible polyethersulfone (PES) substrates using a roll-to-roll sputtering system for use in flexible organic photovoltaics. By the continuous roll-to-roll sputtering of the bottom IZO, Ag, and top IZO layers at room temperature, they were able to fabricate a high quality IZO-Ag-IZO multilayer electrode with a sheet resistance of 6.15 {epsilon}/square, optical transmittance of 87.4%, and figure of merit value of 42.03x10{sup -3} {Omega}{sup -1} on the PES substrate. In addition, the IZO-Ag-IZO multilayer electrode exhibited superior flexibility to the roll-to-roll sputter grown single ITO electrode due to the existence of a ductile Ag layer between the IZO layers and stable amorphous structure of the IZO film. Furthermore, the flexible organic solar cells (OSCs) fabricated on the roll-to-roll sputter grown IZO-Ag-IZO electrode showed higher power efficiency (3.51%) than the OSCs fabricated on the roll-to-roll sputter grown single ITO electrode (2.67%).

14 SOLAR ENERGY↗

Influence of annealing and Ag doping on structural and optical properties of indium tin oxide thin films

Indium tin oxide (ITO) and Ag (1.2{+-}0.1 at. %)-ITO films with the thickness of 130 nm were deposited on glass substrates at room temperature by dc magnetron sputtering and postannealed at the temperature range of 200-400 deg. C. By calculating the x-ray diffraction data, the lattice constants of all samples were obtained and the results show that the annealing led to the smaller lattice constants and the Ag doping resulted in the further lattice distortion. The refractive index n and extinction coefficient k of all samples were extracted from the transmittance spectra by means of the spectroscopic ellipsometry optimization method. Ag-ITO film annealed at 400 deg. C has the high transmittance of 80%-90% in the visible wavelength range. Ag doping dramatically increased the extinction coefficient k of ITO films in UV wavelength range but almost without change in it in visible band. Meanwhile, by contrast with ITO films, Ag-ITO films show much higher n values than that of ITO films. Finally, the optical band gaps of all samples were determined, and it has been found that there is almost no difference of band gaps between ITO and Ag-ITO films. The reasons of the influence of annealing and Ag doping on structural and optical properties of ITO thin films are discussed.

36 MATERIALS SCIENCE↗

Fast and smooth etching of indium tin oxides in BCl{sub 3}/Cl{sub 2} inductively coupled plasmas

The etching characteristics of evaporation-deposited indium tin oxide (ITO) films in BCl{sub 3}/Cl{sub 2} inductively coupled plasmas have been studied. High etch rates >200 nm/min were obtained at large BCl{sub 3}/Cl{sub 2} gas flow ratios and high rf chuck powers, suggesting that the etching process is limited by sputter desorption of InCl{sub x} and SnCl{sub x} compounds. The addition of a small amount of CF{sub 4}, which acts as reducing agent, increased the etch rate by 30% and resulted in very smooth etched surfaces. It has also been found that the material crystallinity has a pronounced influence on ITO etch rate. ITO films annealed at 500 deg. C exhibited the maximum etch resistance.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Infinitely high selective inductively coupled plasma etching of an indium tin oxide binary mask structure for extreme ultraviolet lithography

Currently, extreme ultraviolet lithography (EUVL) is being investigated for next generation lithography. Among the core EUVL technologies, mask fabrication is of considerable importance due to the use of new reflective optics with a completely different configuration than those of conventional photolithography. This study investigated the etching properties of indium tin oxide (ITO) binary mask materials for EUVL, such as ITO (absorber layer), Ru (capping/etch-stop layer), and a Mo-Si multilayer (reflective layer), by varying the Cl{sub 2}/Ar gas flow ratio, dc self-bias voltage (V{sub dc}), and etch time in inductively coupled plasmas. The ITO absorber layer needs to be etched with no loss in the Ru layer on the Mo-Si multilayer for fabrication of the EUVL ITO binary mask structure proposed here. The ITO layer could be etched with an infinitely high etch selectivity over the Ru etch-stop layer in Cl{sub 2}/Ar plasma even with a very high overetch time.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Properties of double-layered Ga-doped Al-zinc-oxide/titanium-doped indium-tin-oxide thin films prepared by dc magnetron sputtering applied for Si-based thin film solar cells

In this article, Ga-doped Al-zinc-oxide (GAZO)/titanium-doped indium-tin-oxide (ITIO) bi-layer films were deposited onto glass substrates by direct current (dc) magnetron sputtering. The bottom ITIO film, with a thickness of 200 nm, was sputtered onto the glass substrate. The ITIO film was post-annealed at 350 deg. C for 10-120 min as a seed layer. The effect of post-annealing conditions on the morphologies, electrical, and optical properties of ITIO films was investigated. A GAZO layer with a thickness of 1200 nm was continuously sputtered onto the ITIO bottom layer. The results show that the properties of the GAZO/ITIO films were strongly dependent on the post-annealed conditions. The spectral haze (T{sub diffuse}/T{sub total}) of the GAZO/ITIO bi-layer films increases upon increasing the post-annealing time. The haze and resistivity of the GAZO/ITIO bi-layer films were improved with the post-annealed process. After optimizing the deposition and annealing parameters, the GAZO/ITIO bi-layer film has an average transmittance of 83.20% at the 400-800 nm wavelengths, a maximum haze of 16%, and the lowest resistivity of 1.04 x 10{sup -3}{Omega} cm. Finally, the GAZO/ITIO bi-layer films, as a front electrode for silicon-based thin film solar cells, obtained a maximum efficiency of 7.10%. These encouraging experimental results have potential applications in GAZO/ITIO bi-layer film deposition by in-line sputtering without the wet-etching process and enable the production of highly efficient, low-cost thin film solar cells.

36 MATERIALS SCIENCE↗

Ag-Pd-Cu alloy inserted transparent indium tin oxide electrodes for organic solar cells

The authors report on the characteristics of Ag-Pd-Cu (APC) alloy-inserted indium tin oxide (ITO) films sputtered on a glass substrate at room temperature for application as transparent anodes in organic solar cells (OSCs). The effect of the APC interlayer thickness on the electrical, optical, structural, and morphological properties of the ITO/APC/ITO multilayer were investigated and compared to those of ITO/Ag/ITO multilayer electrodes. At the optimized APC thickness of 8 nm, the ITO/APC/ITO multilayer exhibited a resistivity of 8.55 × 10{sup −5} Ω cm, an optical transmittance of 82.63%, and a figure-of-merit value of 13.54 × 10{sup −3} Ω{sup −1}, comparable to those of the ITO/Ag/ITO multilayer. Unlike the ITO/Ag/ITO multilayer, agglomeration of the metal interlayer was effectively relieved with APC interlayer due to existence of Pd and Cu elements in the thin region of the APC interlayer. The OSCs fabricated on the ITO/APC/ITO multilayer showed higher power conversion efficiency than that of OSCs prepared on the ITO/Ag/ITO multilayer below 10 nm due to the flatness of the APC layer. The improved performance of the OSCs with ITO/APC/ITO multilayer electrodes indicates that the APC alloy interlayer prevents the agglomeration of the Ag-based metal interlayer and can decrease the thickness of the metal interlayer in the oxide-metal-oxide multilayer of high-performance OSCs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

High performance Schottky diodes based on indium-gallium-zinc-oxide

Indium-gallium-zinc-oxide (IGZO) Schottky diodes exhibit excellent performance in comparison with conventional devices used in future flexible high frequency electronics. In this work, a high performance Pt IGZO Schottky diode was presented by using a new fabrication process. An argon/oxygen mixture gas was introduced during the deposition of the Pt layer to reduce the oxygen deficiency at the Schottky interface. The diode showed a high barrier height of 0.92 eV and a low ideality factor of 1.36 from the current–voltage characteristics. Even the radius of the active area was 0.1 mm, and the diode showed a cut-off frequency of 6 MHz in the rectifier circuit. Using the diode as a demodulator, a potential application was also demonstrated in this work.

42 ENGINEERING↗

Synthesis and Crystal Structure of New Indium Iodate (K{sub 0.6}Na{sub 0.4}Ba)In[IO{sub 3}]{sub 6}

Crystals of new indium iodate (K{sub 0.6}Na{sub 0.4}Ba)In[IO{sub 3}]{sub 6} were prepared by the hydrothermal synthesis. The unit-cell parameters are a = 11.3984(3) Å, с = 11.3817(3) Å, sp. gr. R3̅. The chemical formula of the compound was derived from the structure determination and refinement with anisotropic displacement parameters to R = 0.0284. In the structure the InO{sub 6} octahedra share vertices with six umbrella-like [IO{sub 3}]–groups typical of iodates and form isolated 3̅-symmetric charged In[IO{sub 3}]{sub 6}{sup 3−} clusters. Large Ba, K, and Na cations occupy a common site on a threefold axis due to the isomorphous substitution and compensate the charge of the clusters. The new structure extends the family of the recently discovered alkali-metal and barium iodates containing Ti and Zr atoms in octahedral sites. The iodate K{sub 2}Ge[IO{sub 3}]{sub 6} containing Ge atoms in the centers of octahedra is the parent compound of this structural family.

36 MATERIALS SCIENCE↗

Stopping characteristics of boron and indium ions in silicon

The mean range and its standard deviation are calculated for boron ions implanted into silicon with energies below 10 keV. Similar characteristics are calculated for indium ions with energies below 200 keV. The obtained results are presented in tabular and graphical forms. These results may help in the assessment of conditions of production of integrated circuits with nanometer-sized elements.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Optimization of the deposition and annealing conditions of fluorine-doped indium oxide films for silicon solar cells

Fluorine-doped indium oxide (IFO) films are deposited onto (pp{sup +})Si and (n{sup +}nn{sup +})Si structures made of single-crystal silicon by ultrasonic spray pyrolysis. The effect of the IFO deposition time and annealing time in an argon atmosphere with methanol vapor on the IFO chemical composition, the photovoltage and fill factor of the Illumination-U{sub oc} curves of IFO/(pp{sup +})Si structures, and the sheet resistance of IFO/(n{sup +}nn{sup +})Si structures, correlating with the IFO/(n{sup +})Si contact resistance, is studied. The obtained features are explained by modification of the properties of the SiO{sub x} transition layer at the IFO/Si interface during deposition and annealing. Analysis of the results made it possible to optimize the fabrication conditions of solar cells based on IFO/(pp{sup +})Si heterostructures and to increase their efficiency from 17% to a record 17.8%.

36 MATERIALS SCIENCE↗

The effect of an excess of components on the electrical properties of indium-antimonide films

The causes of anomalous behavior of the Hall mobility of charge carriers as a result of a decrease in the measurement temperature from 300 K in indium-antimonide films obtained by the method of three temperatures are studied. It is shown experimentally that there exist drops in the “admissible” temperatures of evaporators of components and the substrate within which continuous conducting films are obtained. The optimal conditions for sample preparation for which the values of the mobility remain practically constant in the temperature range of 150–350 K are determined. On the basis of the comparison with optical-transmission spectra, it is concluded that there is a high concentration of defects in the films; these defects are related to deviation of the composition from stoichiometry and act as donor and acceptor centers. The presence of such defects makes it possible to explain the decrease in mobility in the films as the temperature is lowered.

36 MATERIALS SCIENCE↗

Specific features of the optical and photoelectric properties of nanocrystalline indium oxide

The spectral dependences of the absorption coefficient and steady-state photoconductivity and the relaxation of photoconductivity (after illumination switch off) in nanocrystalline indium oxide (In{sub 2}O{sub 3}) films synthesized by the sol–gel method are investigated. The mean nanocrystal size varies from 7–8 to 39–41 nm, depending on the sample-preparation conditions. The optical band gap of nanocrystalline In{sub 2}O{sub 3} is determined as a result of combined analysis of the optical absorption spectra and the spectral dependence of the photoconductivity. The optical band gap in nanocrystalline In{sub 2}O{sub 3} is found to be much narrower than the optical band gap in In{sub 2}O{sub 3} single crystals. The photoconductivity decay kinetics in nanocrystalline In{sub 2}O{sub 3} in air, vacuum, and argon at room temperature are studied. A model explaining the observed photoconductivity decay is proposed.

36 MATERIALS SCIENCE↗

Effect of cadmium-selenide quantum dots on the conductivity and photoconductivity of nanocrystalline indium oxide

The effect of cadmium-selenide quantum dots addition on the electrical and photoelectric properties of nanocrystalline indium oxide with nanocrystal dimensions in the range from 7 to 40 nm is studied. By impedance spectroscopy, it is shown that the addition of quantum dots substantially influences the resistance of interfaces between In{sub 2}O{sub 3} crystals. A change in the character of the photoconductivity spectrum of In{sub 2}O{sub 3} upon the addition of CdSe quantum dots is detected, and it is established that this change depends on the In{sub 2}O{sub 3}-nanocrystal dimensions. An energy band diagram is proposed to explain the observed change in the photoconductivity spectrum of In{sub 2}O{sub 3} upon the addition of CdSe quantum dots.

36 MATERIALS SCIENCE↗

X-Ray Study of the Superstructure in Heavily Doped Porous Indium Phosphide

An indium-phosphide InP sample subjected to the pore-generation procedure and then doped with S atoms is studied by the methods of X-ray diffraction analysis (XRD) and small-angle X-ray scattering (SAXS) (with CuK{sub α1}-radiation). The XRD data demonstrate that the sample consists of (coherent) aligned homogeneous components. A point detector is used to obtain, in the anomalous transmission mode by Borrmann, a set of SAXS curves at sample positions varied by azimuthal rotations. The SAXS data are used to simulate a 2D SAXS pattern for the sample under study, which makes it possible to determine the long-distance translation symmetry and, consequently, the presence of a superstructure. The interplanar distances in the superstructure in the directions (110) and (1 0) of the InP lattice are found to be ~260 and 450 nm, respectively. The symmetry group of the superstructure is determined as C{sub 2v} in the (001) plane of the sample lattice.

36 MATERIALS SCIENCE↗

Kinetics of the Photocurrent of a UV Sensor Based on Indium–Zinc Oxide Nanowires

An analysis of the experiments on the kinetics of the rise and decay of the current under the influence of extreme ultraviolet radiation on the indium–zinc oxide filament layer obtained by the electrospinning method is given. It is shown that the rate of rise of photocurrent is controlled by the radiation intensity and its decay rate is controlled by the partial pressure of oxygen on the surface of the wires. Owing to a significantly larger area of the active surface, this UV sensor with a layer of nanoscale wires has a shorter response time in comparison with homogeneous film structures in which the oxygen adsorption sites are concentrated.

77 NANOSCIENCE AND NANOTECHNOLOGY↗

High Affinity Binding of Indium and Ruthenium Ions by Gastrins

The peptide hormone gastrin binds two ferric ions with high affinity, and iron binding is essential for the biological activity of non-amidated forms of the hormone. Since gastrins act as growth factors in gastrointestinal cancers, and as peptides labelled with Ga and In isotopes are increasingly used for cancer diagnosis, the ability of gastrins to bind other metal ions was investigated systematically by absorption spectroscopy. The coordination structures of the complexes were characterized by extended X-ray absorption fine structure (EXAFS) spectroscopy. Changes in the absorption of gastrin in the presence of increasing concentrations of Ga 3+ were fitted by a 2 site model with dissociation constants (K d ) of 3.3 x 10 -7 and 1.1 x 10 -6 M. Although the absorption of gastrin did not change upon the addition of In 3+ ions, the changes in absorbance on Fe 3+ ion binding in the presence of indium ions were fitted by a 2 site model with Kd values for In 3+ of 6.5 x 10 -15 and 1.7 x 10 -7 M. Similar results were obtained with Ru 3+ ions, although the K d values for Ru 3+ of 2.6 x 10 -13 and 1.2 x 10 -5 M were slightly larger than observed for In 3+ . The structures determined by EXAFS all had metal:gastrin stoichiometries of 2:1 but, while the metal ions in the Fe, Ga and In complexes were bridged by a carboxylate and an oxygen with a metal-metal separation of 3.0–3.3 Å, the Ru complex clearly demonstrated a short range Ru—Ru separation, which was significantly shorter, at 2.4 Å, indicative of a metal-metal bond. We conclude that gastrin selectively binds two In 3+ or Ru 3+ ions, and that the affinity of the first site for In 3+ or Ru 3+ ions is higher than for ferric ions. Some of the metal ion-gastrin complexes may be useful for cancer diagnosis and therapy.

60 APPLIED LIFE SCIENCES↗