Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “High Frequency”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Inverter design for high frequency power distribution

A class of simple resonantly commutated inverters are investigated for use in a high power (100 KW - 1000 KW) high frequency (10 KHz - 20 KHz) AC power distribution system. The Mapham inverter is found to provide a unique combination of large thyristor turn-off angle and good utilization factor, much better than an alternate 'current-fed' inverter. The effects of loading the Mapham inverter entirely with rectifier loads are investigated by simulation and with an experimental 3 KW 20 KHz inverter. This inverter is found to be well suited to a power system with heavy rectifier loading.

King, R. J.↗

Field oriented control of an induction machine in a high frequency link power system

A field-oriented controlled induction machine drive operating with a high-frequency single-phase sinusoidal voltage link is presented. System performance is investigated by computer simulation and is verified by a test on a prototype system. A novel control loop to minimize the link voltage fluctuation is proposed. The capability of rapid demagnetization of the induction machine by current regulation is investigated. A current-modulation technique termed mode control is proposed, and its performance is compared with that of the conventional delta-modulation technique.

Sul, Seung K.↗

An efficient high-frequency analysis of modal reflection and transmission coefficients for a class of waveguide discontinuities

A high-frequency analysis of electromagnetic modal reflection and transmission coefficients is presented for waveguide discontinuities formed by joining different waveguide sections. The analysis uses an extended version of the concept of geometrical theory of diffraction based equivalent edge currents in conjunction with the reciprocity theorem to describe interior scattering effects. If the waveguide modes and their associated modal rays can be found explicitly, general two- and three-dimensional waveguide geometries can be analyzed. Expressions are developed for two-dimensional reflection and transmission coefficients. Numerical results are given for a flanged, semi-infinite parallel plate waveguide and for the junction between two linearly tapered waveguides.

Pathak, P. H.↗

Improved high-voltage, high-frequency square-wave generator

This paper describes the design and operation of a prototype high-voltage full-floating high-frequency square-wave generator which is an improved version of the generator developed by Bernius and Chutjian (1989). The present design overcomes possible momentary simultaneous ON states in the MOSFET configuration and is less susceptible to deleterious effects caused by the component aging and replacements with nonidentical parts. The circuit performs well over a wide voltage and frequency range, until a limit is imposed by the operating characteristics of the active MOSFET elements. Circuit diagrams are presented.

Bernius, Mark T.↗

A Two-Dimensional Fem Code for Impedance Calculation in High Frequency Domain

A new method, using the parabolic equation (PE), for the calculation of both high-frequency impedances of small-angle taper (or collimator) is developed in [1]. One of the most important advantages of the PE approach is that it eliminates the spatial scale of the small wavelength from the problem. As a result, only coarser spatial meshes are needed in calculating the numerical solution of the PE. We developed a new code based on Finite Element Method (FEM) which can handle arbitrary profile of a transition and speed up the calculation by orders of magnitude. As a first step, we completed and benchmarked a two-dimensional code. It can be upgraded to three-dimensional geometry.

43 PARTICLE ACCELERATORS↗

High frequency alternating current chip nano calorimeter with laser heating

Heat capacity spectroscopy at frequencies up to 100 kHz is commonly performed by thermal effusivity measurements applying the 3ω-technique. Here we show that AC-calorimetry using a thin film chip sensor allows for the measurement of frequency dependent heat capacity in the thin film limit up to about 1 MHz. Using films thinner than the thermal length of the thermal wave (∼1 μm) at such frequencies is advantageous because it provides heat capacity alone and not in combination with other quantities like thermal conductivity, at least on a qualitative basis. The used calorimetric sensor and the sample are each less than 1 μm thick. For high frequency AC-calorimetry, high cooling rates at very small temperature differences are required. This is realized by minimizing the heated spot to the size of the on chip thermocouple (3 × 6 μm{sup 2}). A modulated laser beam shaped and positioned by a glass fiber is used as the heat source. The device was used to measure the complex heat capacity in the vicinity of the dynamic glass transition (structural relaxation) of poly(methyl methacrylate). Combining different calorimeters finally provides data between 10{sup −3} Hz and 10{sup 6} Hz. In this frequency range the dynamic glass transition shifts about 120 K.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Multiple-phase carbon-coated FeSn 2 /Sn nanocomposites for high-frequency microwave absorption

Rapid expansion in microelectronic devices has prompted increasing research efforts in development of high-frequency electromagnetic wave absorption materials. Multiple-phase FeSn 2 /Sn/Graphite core-shell nanoparticles synthesized by an arc-discharge method, with controllable components and structures, present a typical cloaking feature aroused from the superior electromagnetic wave absorption. Based on transmission line theory, we prove quantitatively that more than 90% of the electromagnetic power can be attenuated at 9-18 GHz. Finally, experimental results coupled with theory calculations by the Cole-Cole equation and the eddy-current model, further reveal that such high performances are originated from the onion-type interfacial architecture at nanoscale and the desirable impedance match resulting from multiple phase components.

36 MATERIALS SCIENCE↗

Experimental Demonstration of High Frequency ELM Pacing by Pellet Injection on DIII-D and Extrapolation to ITER

. The injection of high repetition rate deuterium pellets is shown to trigger high-frequency edge localized modes (ELMs) in otherwise low natural ELM frequency H-mode deuterium discharges in the DIII-D tokamak. The resulting triggered ELMs have significantly lower energy and particle fluxes to the divertor than the natural ELMs. The plasma global energy confinement and density are not strongly affected by the pellet perturbations. The plasma core impurity density is strongly reduced with the application of the pellets. These experiments were performed in plasmas designed to match the ITER baseline configuration in shape and normalized operation with input power just above the H-mode power threshold. This strongly reduced ELM intensity shows promise for exploitation in ITER to control ELM size while maintaining high plasma purity and performance.

Baylor, Larry R↗

Silicon Photoelectrode Thermodynamics and Hydrogen Evolution Kinetics Measured by Intensity-Modulated High-Frequency Resistivity Impedance Spectroscopy

Here, we present an impedance technique based on light intensity-modulated high-frequency resistivity (IMHFR) that provides a new way to elucidate both the thermodynamics and kinetics in complex semiconductor photoelectrodes. We apply IMHFR to probe electrode interfacial energetics on oxide-modified semiconductor surfaces frequently used to improve the stability and efficiency of photoelectrochemical water splitting systems. Combined with current density-voltage measurements, the technique quantifies the overpotential for proton reduction relative to its thermodynamic potential in Si photocathodes coated with three oxides (SiO x , TiO 2 , and Al 2 O 3 ) and a Pt catalyst. In pH 7 electrolyte, the flatband potentials of TiO 2 - and Al 2 O 3 -coated Si electrodes are negative relative to samples with native SiO x , indicating that SiO x is a better protective layer against oxidative electrochemical corrosion than ALD-deposited crystalline TiO 2 or Al 2 O 3 . Adding a Pt catalyst to SiO x /Si minimizes proton reduction overpotential losses but at the expense of a reduction in available energy characterized by a more negative flatband potential relative to catalyst-free SiO x /Si.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

A HIGH-FREQUENCY SEARCH FOR PULSARS WITHIN THE CENTRAL PARSEC OF Sgr A*

We report results from a deep high-frequency search for pulsars within the central parsec of Sgr A* using the Green Bank Telescope. The observing frequency of 15 GHz was chosen to maximize the likelihood of detecting normal pulsars (i.e., with periods of {approx}500 ms and spectral indices of {approx}-1.7) close to Sgr A* that might be used as probes of gravity in the strong-field regime; this is the highest frequency used for such pulsar searches of the Galactic center (GC) to date. No convincing candidate was detected in the survey, with a 10{sigma} detection threshold of {approx}10 {mu}Jy achieved in two separate observing sessions. This survey represents a significant improvement over previous searches for pulsars at the GC and would have detected a significant fraction ({approx}>5%) of the pulsars around Sgr A*, if they had properties similar to those of the known population. Using our best current knowledge of the properties of the Galactic pulsar population and the scattering material toward Sgr A*, we estimate an upper limit of 90 normal pulsars in orbit within the central parsec of Sgr A*.

79 ASTRONOMY AND ASTROPHYSICS↗

HIGH-FREQUENCY RADIO PROPERTIES OF SOURCES IN THE FERMI-LAT 1 YEAR POINT SOURCE CATALOG

The high-frequency radio sky, like the gamma-ray sky surveyed by the Fermi satellite, is dominated by flat spectrum radio quasars and BL Lac objects at bright flux levels. To investigate the relationship between radio and gamma-ray emission in extragalactic sources, we have cross-matched the Australia Telescope 20 GHz survey catalog (AT20G) with the Fermi-LAT 1 year Point Source Catalog (1FGL). The 6.0 sr of sky covered by both catalogs ({delta} < 0{sup 0}, |b|>1.{sup 0}5) contains 5890 AT20G radio sources and 604 1FGL gamma-ray sources. The AT20G source positions are accurate to within {approx}1 arcsec and, after excluding known Galactic sources, 43% of Fermi 1FGL sources have an AT20G source within the 95% Fermi confidence ellipse. Monte Carlo tests imply that at least 95% of these matches are genuine associations. Only five gamma-ray sources (1% of the Fermi catalog) have more than one AT20G counterpart in the Fermi error box. The AT20G matches also generally support the active galactic nucleus (AGN) associations in the First LAT AGN Catalog. We find a trend of increasing gamma-ray flux density with 20 GHz radio flux density. The Fermi detection rate of AT20G sources is close to 100% for the brightest 20 GHz sources, decreasing to 20% at 1 Jy, and to roughly 1% at 100 mJy. Eight of the matched AT20G sources have no association listed in 1FGL and are presented here as potential gamma-ray AGNs for the first time. We also identify an alternative AGN counterpart to one 1FGL source. The percentage of Fermi sources with AT20G detections decreases toward the Galactic plane, suggesting that the 1FGL catalog contains at least 50 Galactic gamma-ray sources in the southern hemisphere that are yet to be identified.

79 ASTRONOMY AND ASTROPHYSICS↗

Low-loss Si-based Dielectrics for High Frequency Components of Superconducting Detectors

Silicon-based dielectric is crucial for many superconducting devices, including high-frequency transmission lines, filters, and resonators. Defects and contaminants in the amorphous dielectric and at the interfaces between the dielectric and metal layers can cause microwave losses and degrade device performance. Optimization of the dielectric fabrication, device structure, and surface morphology can help mitigate this problem. We present the fabrication of silicon oxide and nitride thin film dielectrics. We then characterized them using Scanning Electron Microscopy, Atomic Force Microscopy, and spectrophotometry techniques. The samples were synthesized using various deposition methods, including Plasma-Enhanced Chemical Vapor Deposition and magnetron sputtering. The film's morphology and structure were modified by adjusting the deposition pressure and gas flow. The resulting films were used in superconducting resonant systems consisting of planar inductors and capacitors. Measurements of the resonator properties, including their quality factor, were performed.

low-loss dielectrics↗

Direct current effects on high-frequency properties of patterned permalloy thin films.

We have investigated experimentally direct current (dc) effects on high-frequency properties of two different permalloy (Py) submicrometer patterns of 0.24 mum and 0.55 mum width, 10 mum length, and 100 nm thickness. The natural ferromagnetic resonance (FMR) frequencies for the two samples are about 8.5 and 11.5 GHz. A 50 mA dc produces a FMR frequency reduction of about 1 GHz in both samples. We extracted susceptibility spectra for the samples from the measurement data. We studied inductance variations of Py embedded transmission lines for different dc levels. With 50 mA dc, the operational frequencies of the inductances decreased by 9% and 12.5%. We also tested effects of magnetic fields generated by external magnets on the submicrometer patterns for comparison. To obtain the same magnetization rotation angle, the external magnetic field needs to be about five times larger than the Ampere field created by the direct current. This behavior is unique and may be associated with the increased thermal energy from the Joule heating effects.

24 POWER TRANSMISSION AND DISTRIBUTION↗

Designing high frequency ac inductors using ferrite and Molypermalloy Powder Cores (MPP)

The major considerations in the design of high frequency ac inductors are reviewed. Two methods for designing the inductor: the area product method and the core geometry method, are presented. The two major effects of the inductor air gap, fringing flux power loss and increase of inductance, are discussed. Equations for the inductor design and a step-by-step design procedure are given. The use of a lumped air gap or a distributed air gap are discussed and a comparison of the losses resulting from these gaps, together with experimental results are presented.

Mclyman, W. T.↗

Simultaneous ground-satellite observations of Pi 2 magnetic pulsations and their high frequency enhancement

Pi 2 magnetic pulsations are a frequent occurrence at the earth's surface and have been shown to be clearly correlated with substorm expansion onset. These pulsations are also observed in space at synchronous orbit at the same time as they are seen on the ground at the satellite conjugate point. This brief report describes three days in 1969 on which Pi 2 magnetic pulsations were simultaneously observed at the synchronous satellite ATS 1 and at Tungsten, N.W.T., Canada, near the foot of the ATS 1 magnetic field line. These Pi 2 bursts all exhibit the characteristic waveform and frequency, as well as an 0.3 Hz enhancement, at both locations. This high frequency enhancement appears to be an integral part of Pi 2 bursts both on the surface and at synchronous orbit and should be considered in the development of models of generation mechanisms.

Arthur, C. W.↗

DISCOVERY OF HIGH-FREQUENCY QUASI-PERIODIC OSCILLATIONS IN THE BLACK HOLE CANDIDATE IGR J17091-3624

We report the discovery of 8.5{sigma} high-frequency quasi-periodic oscillations (HFQPOs) at 66 Hz in the Rossi X-ray Timing Explorer data of the black hole candidate IGR J17091-3624, a system whose X-ray properties are very similar to those of microquasar GRS 1915+105. The centroid frequency of the strongest peak is {approx}66 Hz, its quality factor above five, and its rms is between 4% and 10%. We found a possible additional peak at 164 Hz when selecting a subset of the data; however, at the 4.5{sigma} level we consider this detection marginal. These QPOs have hard spectrum and are stronger in observations performed between 2011 September and October, during which IGR J17091-3624 displayed for the first time light curves that resemble those of the {gamma} variability class in GRS 1915+105. We find that the 66 Hz QPO is also present in previous observations (4.5{sigma}), but only when averaging {approx}235 ks of relatively high count rate data. The fact that the HFQPOs frequency in IGR J17091-3624 matches surprisingly well with that seen in GRS 1915+105 raises questions on the mass scaling of QPOs frequency in these two systems. We discuss some possible interpretations; however, they all strongly depend on the distance and mass of IGR J17091-3624, both completely unconstrained today.

79 ASTRONOMY AND ASTROPHYSICS↗

Photodetachment of H − from intense, short, high-frequency pulses

Here, we study the photodetachment of an electron from the hydrogen anion due to short, high-frequency laser pulses by numerically solving the time-dependent Schrödingerr equation. Simulations are performed to investigate the dependence of the photoelectron spectra on the duration, chirp, and intensity of the pulses. Specifically, we concentrate on the low-energy distributions in the spectra that result from the Raman transitions of the broadband pulses. Contrary to one-photon ionization, the low-energy distribution maintains an almost constant width as the laser bandwidth is expanded by chirping the pulses. In addition, we study the transitions of the ionization dynamics from the perturbative to the strong-field regime. At high intensities, the positions of the net one-and two-photon absorption peaks in the spectrum shift and the peaks split to multiple subpeaks due to multiphoton effects. Moreover, although the one- and two-photon peaks and low-energy distribution exhibit saturation of the ionization yields, the low-energy distribution shows relatively mild saturation.

74 ATOMIC AND MOLECULAR PHYSICS↗