Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “HYPERVELOCITY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Correlation of new hypervelocity impact data by threshold penetration relations

Threshold penetration data are established by impacting spherical projectiles onto 2024 aluminum single-wall targets. Nylon and cadmium projectiles were used at impacting velocities from 3.0 to 6.8 km/s and 7.9 to 8.5 km/s respectively. These data are combined with existing data and compared with three threshold relations to assess their respective validities over a wide range of projectile densities. Two of these relations were validated over the extended range of projectile densities.

Hayduk, R. J.↗

Hypervelocity impact heating of porous aluminum

Estimates of the thermal energy and other properties of the postshock condition are obtained for porous aluminum targets impacted by iron or aluminum projectiles, in the shock pressure range between about 0.4 and 8 Mbar. The starting point is the determination of a distinct Hugoniot equation for each value of porosity, from available experimental data. Rankine-Hugoniot equations and a Mie-Gruneisen equation of state supply the relations necessary for finding the thermodynamic properties of adiabatically relaxed materials. The results are of interest in such fields as ablation studies, meteoritics, and lunar topography.

Rehfuss, D. E.↗

Shock shapes on blunt bodies in hypersonic-hypervelocity helium, air, and CO2 flows, and calibration results in Langley 6-inch expansion tube

Shock shape results for flat-faced cylinders, spheres, and spherically blunted cones in various test gases, along with preliminary results from a calibration study performed in the Langley 6-inch expansion tube are presented. Free-stream velocities from 5 to 7 km/sec are generated at hypersonic conditions with helium, air, and CO2, resulting in normal shock density ratios from 4 to 19. Ideal-gas shock shape predictions, in which an effective ratio of specific heats is used as input, are compared with the measured results. The effect of model diameter is examined to provide insight to the thermochemical state of the flow in the shock layer. The regime for which equilibrium exists in the shock layer for the present air and CO2 test conditions is defined. Test core flow quality, test repeatability, and comparison of measured and predicted expansion-tube flow quantities are discussed.

Miller, C. G., III↗

Results of an investigation of hypersonic viscous interaction effects on and 0.01 scale Space Shuttle Orbiter 51-0 model in the AEDC-VKF Hypervelocity Wind Tunnel (0A81)

The major hypersonic aerodynamic results obtained experimentally from the 0.010-scale (51-0) 140A/B orbiter vehicle are presented. The test was conducted over an angle-of-attack range from 20 to 35 degrees for nominal Mach numbers of 16 and 20. The Mach 16 data were obtained at Reynolds numbers, based on model length, of nominally 0.54 x 106 and 1.18 x 106. The Mach number 20 data were obtained at nominal Reynolds numbers of 0.08 x 106 and 0.27 x 106. Various elevon deflections and body flap deflections were tested for determination of control effectiveness. The test objectives were: (1) verify December 1973 aerodynamic Design Data Book estimates for Mach number greater than 10; (2) determine configuration forward and aft trim boundaries and control characteristics; (3) determine high Mach number - low Reynolds number effects; (4) determine if positive control surface flow separation is present and magnitude of separation effects.

Elder, D. J.↗

Research investigation of the physical interactions and phenomena associated with hypervelocity sub-micron particles

Signals from impact ionization plasmas were studied as a means of performing microparticle composition analysis. Impact ionization signal response was measured in a time-of-flight (TOF) system for lanthanum hexaboride, carbonyl iron, and aluminum microparticle impacts on a tantalum target, primarily in the 1 - 8 km/s velocity range. Oscilloscope photographs of representative ion TOF signal response are given for each material studied. Graphs and histograms are presented of the total charge collected as well as the charge collected in each observed ion mass group. Data show that ion signals consist primarily of the lower ionization potential elements over the 1 - 8 km/s range.

Roy, N. L.↗

Experimental hypervelocity impact into quartz sand - Distribution and shock metamorphism of ejecta

Results are presented for vertical impacts of 0.3-g cylindrical plastic projectiles into noncohesive quartz sand in which vertical and horizontal reference strate were employed by using layers of colored sand. The impacts were performed at velocities of 5.9-6.9 km/sec with a vertical gun ballistic range. The craters, 30-33 cm in diameter, reveal a radial decay of the ejecta mass per unit area with a power of -2.8 to -3.5. Material displaced from the upper 15% of the crater depth d is represented within the whole ejecta blanked, material from deeper than 28% of d is deposited inside 2 crater radii, and no material from deeper than 33% of d was ejected beyond the crater rim. Shock-metamorphosed particles (glassy agglutinates, cataclastic breccias, and comminuted quartz) amount to some 4% of the total displaced mass and indicate progressive zones of decay of shock intensity from a peak pressure of 300 kbar. The shock-metamorphosed particles and the shock-induced change in the grain size distribution of ejected samples have close analogies to the basic characteristics of the lunar regolith. Possible applications to regolith formation and to ejecta formations of large-scale impact craters are discussed.

Stoeffler, D.↗

New two-stage accelerator for hypervelocity impact simulation

The present knowledge of the micrometeoroid environment and the simulation requirements for laboratory devices show that the simulated mass-velocity range must be extended to higher values in both mass and velocity. This is accomplished with the new two-stage accelerator, which consists of a light gas gun as the first stage and a coaxial accelerator with a compressor coil as the second stage. The operation of the new device is described together with a theoretical investigation of the timing of the first and the second stage, which leads to an appropriate adjustment of the two stages. The theoretical and experimental results agree well and show that 600-micron diameter glass beads have been accelerated to velocities near 20 km/sec.

Igenbergs, E. B.↗

Microcraters formed in hot glass by hypervelocity projectiles

Microcraters were formed in heated soda-lime glass by the normal incidence of spheres of plastic or fused silica with diameters between 0.8 and 4.5 microns and velocities between 2.5 and 10 km/s. The morphology of the craters in targets at temperatures up to 800 C is little different from those formed in unheated glass. Spallation still occurs to the same extent and above the same velocity threshold, but the spalls sag and sharp edges become dull in a few seconds at temperatures above the softening point. There is a small increase in the flow of glass from the central pit into a narrow lip at the higher temperatures, but this lip is often removed by spallation, especially at the higher velocities of impact. There is no evidence of a splashed lip with strings of melt overlying the spalled area. The results in conjunction with other evidence suggest that most lunar craters of micrometer size with a smooth central pit, splashed lip, and a spallation zone are the result of primary impacts.

Vedder, J. F.↗

Experimental hypervelocity impact into quartz sand. II - Effects of gravitational acceleration

Experimental results for craters formed by aluminum spheres impacting at normal incidence against quartz sand targets in gravitational acceleration environments ranging from 0.073 to 1.0 g (g = 980 cm/sq sec) are reported. Impact velocities varied from 0.4 to 8.0 km/sec. Crater dimensions and formation times are compared with results from a simplified dimensional analysis of the cratering processes. Although the comparison indicates a dominant role of gravity relative to the target strength for craters formed in sand, the results serve primarily to emphasize that both gravity and strength are variables of fundamental significance to cratering processes.

Gault, D. E.↗

Magnetic field and shock effects and remanent magnetization in a hypervelocity impact experiment

The impact of aluminum projectiles onto high-alumina terrestrial basalt blocks at 13-15 km/s in the presence of a variable magnetic field is studied. Plasma production but not field production was detected, and characteristics of the remanence and the shocked basalt are reported. Mineralogical data suggest that the magnetization acquired in the material near the craters is shock remanence. The experimental results might indicate that shock effects or possibly thermoremanence in ejecta fragments, may be responsible for part of the magnetization of the lunar surface.

Srnka, L. J.↗

Three-dimensional optimum maneuvers of a hypervelocity vehicle

In this paper the optimum three-dimensional maneuver in lift and bank control of a reentry vehicle is investigated. The use of the modified Chapman's variables and a normalized lift coefficient allows a general discussion of the optimum control of an arbitrary vehicle reentering any planetary atmosphere. Several planar problems are solved. Using the condition of equilibrium glide, the maximum cross range and the footprint of a reentry vehicle from circular speed are computed in terms of the maximum lift-to-drag ratio.

Vinh, N. X.↗

Heat-transfer distributions for biconics at incidence in hypersonic-hypervelocity real-gas flows

Laminar heat-transfer distributions were measured on spherically blunted, 13/7 deg straight and bent biconics at freestream velocities from 4.5 to 6.9 km/s and Mach numbers from 6 to 9. The flows were generated in the NASA's Langley Expansion Tube using helium, nitrogen, air, and carbon dioxide; angle of attack, referenced to the axis of the aft cone, was varied from zero to 20 deg. The penalty in windward heating to the fore cone due to the 7-deg nose bend diminished rapidly with increasing angle of attack and was only 10 to 20 percent at the design trim angle of attack of 20 deg. Leeward heating initially decreased, then increased, with increasing angle of attack. Windward heating rates predicted with a computer code that solves the parabolized Navier-Stokes equations were in good agreement with measurements for helium and air. The study used a 1.9-percent scale model of the proposed generic planetary vehicle and is directly applicable to the orbital transfer vehicle, which incorporates a spherically blunted biconic.

Miller, C. G.↗

A planetary ultra hypervelocity impact mechanics and shock wave science facility

Using the concept of intercepting orbits from a pair of Space Station serviced free flyers, a class of impact and shock wave experiments pertinent to planetary science can be performed. One proposed free flying vehicle is an impactor dispensor, and the second is the impact laboratory. How collision is achieved by utilizing essentially twice orbital velocity is demonstrated. The impactor dispensor contains a series of small flyer plates or other projectiles which are launched into the trajectory of the impactor laboratory at appropriate positions. The impactor laboratory is a large impact tank similar to those in terrestrial gun laboratories, except that it contains a supply of targets and instrumentation such as high speed cameras, flash X-ray apparatus and digital recorders. Shock and isentropic pressures of up to 20 Mbar are achievable with such a system which provides 15 km/sec impact velocities for precisely oriented projectiles.

Ahrens, T. J.↗

Hypervelocity atomic oxygen source for the study of atom-surface interactions

Planned improvements in an electric discharge heated atomic oxygen beam source are described which will provide 6 to 7 kms(-1) beams of atomic oxygen with a flux of 10(16) cm(-2) s(-1) at 50 cm distance from the source aperture. A major advance will be the use of a zone of silence nozzle-skimmer arrangement which is necessitated by the need for high source flux and performance. It is anticipated that a Phase 2 program would provide for the fabrication of a two stage vacuum system which would be suitable for bolting on to a UHV (ultrahigh vacuum) surface study apparatus.

Freedman, A.↗

Hypervelocity gliding maneuvers

Atmospheric maneuvering during orbital return is a major advantage of high-lift space vehicle configurations, affording the Space Shuttle Orbiter a variety of possible landing sites. A brief analysis is presented for turning maneuvers during gliding flight, including the lateral distances traversed, at velocities up to circular satellite speed. Lateral distances of 3000 and 6000 km can be traversed during 90- and 180-deg turns for L/D of 2 and 3, respectively.

Tauber, Michael E.↗

Collecting Hypervelocity Particles Intact

Experiments conducted to develop targets capturing micrometerorites, dust, and other small particles in outer space traveling at speed of several kilometers per second. Principal criterion for such target; must stop particles while preserving mineralogical properties for subsequent analysis. Collection concept simple: foam or other underdense medium used to remove kinetic energy gently from impinging particle. Well-designed collector decelerates and stops particle without imposing stresses beyond critical stresses that damage particle thermally or mechanically. Target technology also useful in terrestrial studies of debris for explosions.

Tsou, Peter↗

Trajectory characteristics and heating of hypervelocity projectiles having large ballistic coefficients

A simple, approximate equation describing the velocity-density relationship (or velocity-altitude) has been derived from the flight of large ballistic coefficient projectiles launched at high speeds. The calculations obtained by using the approximate equation compared well with results for numerical integrations of the exact equations of motion. The flightpath equation was used to parametrically calculate maximum body decelerations and stagnation pressures for initial velocities from 2 to 6 km/s. Expressions were derived for the stagnation-point convective heating rates and total heat loads. The stagnation-point heating was parametrically calculated for a nonablating wall and an ablating carbon surface. Although the heating rates were very high, the pulse decayed quickly. The total nose-region heat shield weight was conservatively estimated to be only about 1 percent of the body mass.

Tauber, Michael E.↗