Results for “GAS REACTOR” — Page 26

DOE OSTI2019

Test Plan for Reirradiation and 1200°C Heating Test of AGR-3/4 Compact 8-1

Post irradiation examination (PIE) and heating tests of tristructural isotropic (TRISO)-coated fuel particles, fuel compacts, and graphite from Advanced Gas Reactor (AGR) irradiation experiment AGR 3/4 are in progress. The AGR-3/4 test train consisted of twelve separate capsules irradiated in the northeast flux trap of the Advanced Test Reactor (ATR) at Idaho National Laboratory (INL) from December 14, 2011, to April 12, 2014 (Collin 2015b). This test plan describes the reirradiation and subsequent heating test of AGR-3/4 Compact 8-1. One of the main goals of this test is to assess the retention of short-lived fission products I-131 (t1/2 = 8.02 d) and Xe-133 (t1/2 = 5.2 d) in fuel kernels. To generate short-lived fission products, the compact will first be reirradiated in the Neutron Radiography Reactor (NRAD). Following reirradiation, the compact will be removed from NRAD, gamma scanned on the Precision Gamma Scanner (PGS), and then loaded into the Fuel Accident Condition Simulator (FACS) furnace for heating at 1200°C. Fission gases and condensable fission products released from the compact will be collected in the Fission Gas Monitoring System (FGMS) and the FACS condensation plates, respectively. The planned uses of AGR-3/4 compacts (including heating testing and destructive analysis) are discussed in the AGR-3/4 PIE plan (Demkowicz 2017). Significant portions of this plan have been completed and additional samples are being used for purposes not captured in that plan.

42 ENGINEERING↗

DOE OSTI2023

Editorial: Benchmark experiments, development and needs in support of advanced reactor design

Advanced nuclear reactor designs will for the most part be a departure from low enrichment light water reactor (LWR) designs currently operated around the world. Such advanced designs include but are not limited to new TRISO-fueled high temperature gas reactors, heat-pipe cooled micro-reactors, fluoride salt cooled high-temperature reactors, molten salt reactors, lead cooled fast reactors, nuclear thermal propulsion concepts, and include LWR designs with advanced fuel and clad types. Modeling and simulation methods for advanced reactors is necessary for regulators to approve license requests. However, regulators also require that modeling approaches be validated against experimental measurements. Hence, there is a crucial need for data for advanced reactor systems that will support validation of analysis methods. To this end, this Research Topic includes eleven papers organized into topical seven categories relevant for advanced reactor design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2018

Hydrodynamic Characteristics of Coolant Tracts in High-Temperature Gas-Cooled Nuclear Reactor

A validation of the hydrodynamic characteristics of the coolant loop of a high-temperature gas-cooled reactor at low power in a power-generating facility using a turbo-machine conversion in a Brayton cycle is given. The validation is accomplished using diagnostics of models of a coolant loop, numerical modeling of the hydrodynamics, heat-and-mass transfer in models with more accurate three-dimensional CFD codes. Relations for ensuring tangential uniformity of the coolant velocity distribution near the core shell and at the entry into the distributing manifold are obtained. A distributing manifold geometry securing a uniform coolant flow distribution over core cooling tracts at low hydraulic resistance is proposed. Data are obtained on the velocity and temperature distributions in fuel pins spaced by a wire winding.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2016

All Nuclear Hybrid Superheater Design Method

The 'All Nuclear Hybrid' (ANH) concept combines Light Water (LWR) and Generation IV (Gen IV) reactor technologies to produce superheated steam. LWR technology characteristically produces steam temperatures of ∼300 C. Process steam demands such as refineries and hydrogen production can require steam temperatures that exceed 600 C. Therefore, an additional heat source must be added to provide the heat to increase or 'boost' the temperature of the steam generated from by the LWR. A recent study demonstrated that application of the ANH concept to a refinery optimized the use of nuclear technologies and maximized carbon dioxide emission reductions. The objective of the present work is to size the heat exchangers (Superheaters) required to apply the ANH concept to a Westinghouse AP1000 LWR to produce 675 C superheated steam. Two GenIV reactor concepts are considered to provide the additional heat source and high primary coolant temperatures required to produce the superheated steam: a High temperature Gas Reactor (HTGR) using helium as primary coolant, and a Molten Salt reactor. The details of the GenIV reactor designs are not the focus of this study; however, the primary coolant thermal conditions from these concepts are utilized directly in the superheater sizing calculations. Also, a tube and shell superheater design is assumed for the superheater due to its extensive use in the nuclear and other industries. The ANH concept generates superheated steam by first utilizing LWR technology to accomplish the phase change from liquid water to steam within the steam generator. This is a well-established technology with several decades of successful safe operation. Next, the concept utilizes GenIV reactor technology to superheat the steam. Since both the working fluids in the superheater are single phase, the heat transfer and pressure drop calculations required to size the superheater can be performed without complex two-phase computer analyses (i.e., RELAP5). This study presents an approach for the sizing the ANH superheater using an iterative LMTD heat exchanger design method. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2025

Radiochemical transport analysis of gamma spectroscopic data to support estimation of molten salt reactor off-gas inventories

This work introduces a novel application of radiochronometry to estimate nuclide inventories in molten salt reactor off-gas systems based on gamma spectroscopic data from the Molten Salt Reactor Experiment. By analyzing isotopic, isobaric, and isomeric activity ratios, key depletion model parameters related to species transport within the reactor system could be inferred. The findings demonstrate the potential of leveraging a limited subset of gamma spectroscopy measurements to accurately estimate nuclide inventories throughout the off-gas system. The approach can be useful in reactor design activities and support analyses relevant to operations, safety, security, and safeguards.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2014

AGR-2 Irradiation Test Final As-Run Report

This document presents the as-run analysis of the AGR-2 irradiation experiment. AGR-2 is the second of the planned irradiations for the Advanced Gas Reactor (AGR) Fuel Development and Qualification Program. Funding for this program is provided by the U.S. Department of Energy as part of the Very High Temperature Reactor (VHTR) Technology Development Office (TDO) program. The objectives of the AGR-2 experiment are to: 1. Irradiate UCO (uranium oxycarbide) and UO 2 (uranium dioxide) fuel produced in a large coater. Fuel attributes are based on results obtained from the AGR-1 test and other project activities. 2. Provide irradiated fuel samples for post-irradiation experiment (PIE) and safety testing. 3. Support the development of an understanding of the relationship between fuel fabrication processes, fuel product properties, and irradiation performance. The primary objective of the test was to irradiate both UCO and UO 2 TRISO (tristructural isotropic) fuel produced from prototypic scale equipment to obtain normal operation and accident condition fuel performance data. The UCO compacts were subjected to a range of burnups and temperatures typical of anticipated prismatic reactor service conditions in three capsules. The test train also includes compacts containing UO 2 particles produced independently by the United States, South Africa, and France in three separate capsules. The range of burnups and temperatures in these capsules were typical of anticipated pebble bed reactor service conditions. The results discussed in this report pertain only to U.S.-produced fuel.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

NASA NTRS1999

Dimensionless Numbers Expressed in Terms of Common CVD Process Parameters

A variety of dimensionless numbers related to momentum and heat transfer are useful in Chemical Vapor Deposition (CVD) analysis. These numbers are not traditionally calculated by directly using reactor operating parameters, such as temperature and pressure. In this paper, these numbers have been expressed in a form that explicitly shows their dependence upon the carrier gas, reactor geometry, and reactor operation conditions. These expressions were derived for both monatomic and diatomic gases using estimation techniques for viscosity, thermal conductivity, and heat capacity. Values calculated from these expressions compared well to previously published values. These expressions provide a relatively quick method for predicting changes in the flow patterns resulting from changes in the reactor operating conditions.

Kuczmarski, Maria A.↗

DOE OSTI2016

High Temperature Gas-Cooled Test Reactor Point Design: Summary Report

A point design has been developed for a 200-MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched uranium oxycarbide fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technology readiness level, licensing approach, and costs of the test reactor point design.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2018

On/Off State Classification of a Reactor Facility Using Gas Effluence Measurements

Inferring on/off operational state of a reactor facility using measurements from an independent monitoring system is critical to the assessment of its compliance to agreements. In this paper, we consider the problem of inferring on/off state of a reactor facility using measurements of Ar-41, Cs-138, and Xe-138 gas effluence types collected at the facility’s off-gas stack. We present classifiers based on thresholding measurements of individual effluence types, and then present fusers that combine their outputs or measurements. We present five fusers based on simple majority rule, Chow’s pattern recognition function, Fisher’s combined p-value statistic, physics-based Poisson radiation counts model, and correlation coefficient method. In addition, we also test five machine learning methods based on non-linear classifiers, which are available as R packages. Finally, our results show that: (i) these gas effluence measurements are effective in inferring on/off state of a reactor facility; for example, best fusers achieve ~97% detection at ~1% false alarm rate, and (ii) fusers that combine all effluence types based on physics-based models, correlation coefficient and Fisher’s method outperform simple majority rule, Chow’s fusers and machine learning methods, as well as when they are applied to individual and pairs of effluence types.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

DOE OSTI2015

Feasibility and Safety Assessment for Advanced Reactor Concepts Using Vented Fuel

Recent interest in fast reactor technology has led to renewed analysis of past reactor concepts such as Gas Fast Reactors and Sodium Fast Reactors. In an effort to make these reactors more economic, the fuel is required to stay in the reactor for extended periods of time; the longer the fuel stays within the core, the more fertile material is converted into usable fissile material. However, as burnup of the fuel-rod increases, so does the internal pressure buildup due to gaseous fission products. In order to reach the 30 year lifetime requirements of some reactor designs, the fuel pins must have a vented-type design to allow the buildup of fission products to escape. The present work aims to progress the understanding of the feasibility and safety issues related to gas reactors that incorporate vented fuel. The work was separated into three different work-scopes: 1. Quantitatively determine fission gas release from uranium carbide in a representative helium cooled fast reactor; 2. Model the fission gas behavior, transport, and collection in a Fission Product Vent System; and, 3. Perform a safety analysis of the Fission Product Vent System. Each task relied on results from the previous task, culminating in a limited scope Probabilistic Risk Assessment (PRA) of the Fission Product Vent System. Within each task, many key parameters lack the fidelity needed for comprehensive or accurate analysis. In the process of completing each task, the data or methods that were lacking were identified and compiled in a Gap Analysis included at the end of the report.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2016

High-Temperature Gas-Cooled Test Reactor Point Design

A point design has been developed for a 200 MW high-temperature gas-cooled test reactor. The point design concept uses standard prismatic blocks and 15.5% enriched UCO fuel. Reactor physics and thermal-hydraulics simulations have been performed to characterize the capabilities of the design. In addition to the technical data, overviews are provided on the technological readiness level, licensing approach and costs.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2014

Thermal-Hydraulic Analysis of an Experimental Reactor Cavity Cooling System with Air. Part I: Experiments; Part II: Separate Effects Tests and Modeling

This experimental study investigates the thermal hydraulic behavior and the heat removal performance for a scaled Reactor Cavity Cooling System (RCCS) with air. A quarter-scale RCCS facility was designed and built based on a full-scale General Atomics (GA) RCCS design concept for the Modular High Temperature Gas Reactor (MHTGR). The GA RCCS is a passive cooling system that draws in air to use as the cooling fluid to remove heat radiated from the reactor pressure vessel to the air-cooled riser tubes and discharged the heated air into the atmosphere. Scaling laws were used to preserve key aspects and to maintain similarity. The scaled air RCCS facility at UW-Madison is a quarter-scale reduced length experiment housing six riser ducts that represent a 9.5° sector slice of the full-scale GA air RCCS concept. Radiant heaters were used to simulate the heat radiation from the reactor pressure vessel. The maximum power that can be achieved with the radiant heaters is 40 kW with a peak heat flux of 25 kW per meter squared. The quarter-scale RCCS was run under different heat loading cases and operated successfully. Instabilities were observed in some experiments in which one of the two exhaust ducts experienced a flow reversal for a period of time. The data and analysis presented show that the RCCS has promising potential to be a decay heat removal system during an accident scenario.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2017

Technical Evaluation Report for the NDMAS AGR-5/6/7 TRISO Irradiation Monitoring System

The Nuclear Data Management and Analysis System (NDMAS) manages irradiation experiment data collected under the Advanced Gas Reactor (AGR) Fuel Development and Qualification program within the Advanced Reactor Technologies Technology Development Office. The AGR-5/6/7 irradiation experiment combines the fifth, sixth, and seventh planned irradiation campaigns of the U.S. Department of Energy AGR Fuel Development and Qualification Program. These combined irradiation tests will consist of fuel qualification tests (AGR-5/6) and a margin test (AGR-7) for the industrially produced uranium oxycarbide (UCO) tristructural isotropic (TRISO) coated particle fuel developed by the AGR program. The objective of the AGR-5/6/7 irradiation experiment is to establish the performance of UCO TRISO fuel fabricated using engineering-scale equipment in a production environment under and beyond normal operating conditions (PNL-5245). Experimental irradiation measurements for this experiment (i.e., thermocouple temperature, gas flow rate, fission product release rate, gross gamma count, and Advanced Test Reactor (ATR) operational parameters) are captured automatically to the NDMAS database. Data derived from numerical simulation or other mathematical analyses (i.e., fast fluence, burnup, temperature, and fission product release to birth ratio) are captured to the database when provided by the researchers. The NDMAS database is a relational database accessed via structured query language and managed with Microsoft SQL Server. While select users can directly access the database, that is not the most convenient way to interact with the data. The NDMAS team constructs numerous tables that combine related datasets, and delivers those data to researchers via graphs and spreadsheets on a Microsoft SharePoint-based website. For the AGR-5/6/7 experimental data, a new subsite has been developed, along with a set of web pages. These pages will be used by members of fuel irradiation team for monitoring irradiation conditions according to specification (SPC-1749), by the physics modelers to access necessary model inputs, and by the nuclear engineering community to view and access data such as fuel temperatures, fission product release from capsules, and ATR operational parameters. The deliverable represented in this document is a SharePoint website containing tables of the AGR-5/6/7 measured and calculated data, graphs displaying the data, and links to source documents and references.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2017

AGR-5/6/7 Irradiation Monitoring Web Site Design

The Nuclear Data Management and Analysis System (NDMAS) manages irradiation experiment data collected under the Advanced Gas Reactor (AGR) Fuel Development and Qualification program within the Advanced Reactor Technologies Technology Development Office. The AGR-5/6/7 irradiation experiment combines the fifth, sixth, and seventh planned irradiation campaigns of the U.S. Department of Energy AGR Fuel Development and Qualification Program. These combined irradiation tests will consist of fuel qualification tests (AGR-5/6) and a margin test (AGR-7) for the industrially produced uranium oxycarbide (UCO) tristructural isotropic (TRISO) coated particle fuel developed by the AGR program. The objective of the AGR-5/6/7 irradiation experiment is to establish the performance of UCO TRISO fuel fabricated using engineering-scale equipment in a production environment under and beyond normal operating conditions (PNL-5245). Experimental irradiation measurements for this experiment (i.e., thermocouple temperature, gas flow rate, fission product release rate, gross gamma count, and Advanced Test Reactor (ATR) operational parameters) are captured automatically to the NDMAS database. Data derived from numerical simulation or other mathematical analyses (i.e., fast fluence, burnup, temperature, and fission product release to birth ratio) are captured to the database when provided by the researchers. The NDMAS database is a relational database accessed via structured query language and managed with Microsoft SQL Server. While select users can directly access the database, that is not the most convenient way to interact with the data. The NDMAS team constructs numerous tables that combine related datasets, and delivers those data to researchers via graphs and spreadsheets on a Microsoft SharePoint-based website. For the AGR-5/6/7 experimental data, a new subsite has been developed, along with a set of web pages. These pages will be used by members of fuel irradiation team for monitoring irradiation conditions according to specification (SPC-1749), by the physics modelers to access necessary model inputs, and by the nuclear engineering community to view and access data such as fuel temperatures, fission product release from capsules, and ATR operational parameters. The deliverable represented in this document is a SharePoint website containing tables of the AGR-5/6/7 measured and calculated data, graphs displaying the data, and links to source documents and references.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2016

Bypass Flow Resistance in Prismatic Gas-Cooled Nuclear Reactors

Available computational fluid dynamics (CFD) predictions of pressure distributions in the vertical bypass flow between blocks in a prismatic gas-cooled reactor (GCR) have been analyzed to deduce apparent friction factors and loss coefficients for systems and network codes. We performed calculations for vertical gap spacings "s" of 2, 6 and 10 mm, horizontal gaps between the blocks of two mm and two flow rates, giving a range of gap Reynolds numbers Re Dh of about 40 to 5300. Laminar predictions of the fully-developed friction factor f fd were about three to ten per cent lower than the classical infinitely-wide channel In the entry region, the local apparent friction factor was slightly higher than the classic idealized case but the hydraulic entry length L hy was approximately the same. The per cent reduction in flow resistance was greater than the per cent increase in flow area at the vertical corners of the blocks. The standard k-ϵ model was employed for flows expected to be turbulent. Its predictions of f fd and flow resistance were significantly higher than direct numerical simulations for the classic case; the value of L hy was about thirty gap spacings. Initial quantitative information for entry coefficients and loss coefficients for the expansion-contraction junctions between blocks is also presented. Our study demonstrates how CFD predictions can be employed to provide integral quantities needed in systems and network codes.

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

DOE OSTI2018

FY18Q2 Quarterly Report: Radiation Enhanced Diffusion of Ag, Ag-Pd, Eu, and Sr in Neutron Irradiated PyC/SiC Diffusion Couples

Obtaining accurate diffusion kinetics in materials representative of those found in tristructural-isotopic (TRISO) coated particle fuel is needed to predict the diffusive release of fission products in reactor. Planar diffusion couples with representative pyrocarbon (PyC) and silicon carbide (SiC) layers are being produced using the same fluidized-bed chemical vapor deposition (FBCVD) technology used to produce TRISO particles from the first irradiation experiment of the Advanced Gas Reactor (AGR) Fuel Qualification and Development Program. The layer properties of the planar diffusion couples are tailored to meet the specified PyC density and microstructure of the SiC layer as defined by the AGR program. The influence of these variables on diffusion is also being explored by producing PyC and SiC variants.

11 NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗

DOE OSTI2018

FY18Q3 Quarterly Report: Radiation Enhanced Diffusion of Ag, Ag-Pd, Eu, and Sr in Neutron Irradiated PyC/SiC Diffusion Couples

Obtaining accurate diffusion kinetics in materials representative of those found in tristructural-isotopic (TRISO) coated particle fuel is needed to predict the diffusive release of fission products in reactor. Planar diffusion couples with representative pyrocarbon (PyC) and silicon carbide (SiC) layers are being produced using the same fluidized-bed chemical vapor deposition (FBCVD) technology used to produce TRISO particles from the first irradiation experiment of the Advanced Gas Reactor (AGR) Fuel Qualification and Development Program. The layer properties of the planar diffusion couples are tailored to meet the specified PyC density and microstructure of the SiC layer as defined by the AGR program. The influence of these variables on diffusion is also being explored by producing PyC and SiC variants. The pathway to producing the diffusion couples is discussed and builds upon efforts described in previous reports [1–3].

36 MATERIALS SCIENCE↗

DOE OSTI2025

Understanding Model Inadequacy in TRISO Nuclear Fuel Fission Products Release Models: Empirical and Mechanistic Approaches

The increasing use of tristructural isotropic (TRISO) particle fuel in both advanced and existing reactors necessitates a thorough evaluation of uncertainties and shortcomings in TRISO fission product release models. These inadequacies arise from the simplifications made in computational models compared to experimental data. Utilizing the BISON fuel performance code and experimental data from the Advanced Gas Reactor (AGR) program provides a unique chance to rigorously assess these inadequacies within a Bayesian uncertainty quantification (UQ) framework. This study contrasts the standard Bayesian framework with the Kennedy-O'Hagan (KOH) framework, which explicitly accounts for modeling inadequacies, in the context of UQ for TRISO silver release models. It examines both the traditional Arrhenius equation and a more advanced lower-length-scale (LLS)-informed model that incorporates microstructure information. The inverse UQ process applied to AGR-2 and AGR-3/4 datasets identified modeling inadequacy as the primary source of uncertainty, with experimental noise also being significant, while model parameter uncertainty was minimal. Both the Arrhenius and LLS-informed models showed similar levels of modeling inadequacy. For forward predictive UQ using the AGR-1 dataset, the KOH framework enhanced the accuracy and quality of quantified uncertainties by approximately 30% and 40%, respectively, compared to the standard Bayesian framework. This improvement was observed for both the Arrhenius and LLS-informed models. At the engineering scale, both models performed similarly, but the LLS-informed model outperformed the Arrhenius equation at the mesoscale. These findings underscore the importance of explicitly considering modeling inadequacy in the UQ process and highlight the need for ongoing refinement of physics-based models to address these shortcomings.

11 - NUCLEAR FUEL CYCLE AND FUEL MATERIALS↗