Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Forced Oscillation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

On the wave forcing of the semi-annual zonal wind oscillation

Observational evidence of rather large period waves (23-60 d) in the troposphere/stratosphere, particularly during the winter months, is presented. Wind data collected on a regular basis employing high-altitude balloons and meteorological rockets over the past few years are used. Maximum entropy methods applied to the time series of zonal wind data indicate the presence of 23-60-waves more prominently than shorter-period waves. The waves have substantial amplitudes in the stratosphere and lower mesosphere, often larger than those noted in the troposphere. The mean zonal wind in the troposphere (5-15 km altitude) during December, January, and February exhibits the presence of strong westerlies at latitudes between 8 and 21 deg N.

Nagpal, O. P.↗

Effects of Resonance in Quasi-Periodic Oscillators of Neutron Star Binaries

Using a large quantity of Rossi X-Ray Timing Explorer data presented in the literature, I offer a detailed investigation into the accuracy of the quasi-periodic oscillation (QPO) frequency determination. The QPO phenomenon seen in X-ray binaries is possibly a result of the resonance of the intrinsic (eigen) oscillations and harmonic driving forces of the system. I show that the resonances, in the presence of the damping of oscillations, occur at frequencies that are systematically and randomly shifted with respect to the eigenfrequencies of the system. The shift value strongly depends on the damping rate that is measured by the half-width of the QPO feature. Taking into account this effect, I analyze the QPO data for four Z sources, Scorpius X-I, GX 340+0, GX 5-1, and GX 17+2, and two atoll sources, 4U 1728-34 and 4U 0614+09. The transition-layer model (TLM) predicts the existence of the invariant quantity delta, an inclination angle of the magnetospheric axis with respect to the normal to the disk. I calculate delta and the error bars of delta using the resonance shift, and I find that the inferred delta-values are consistent with constants for these four Z sources, in which horizontal-branch oscillation and kilohertz frequencies have been detected and correctly identified. It is shown that the inferred delta are in the range between 5.5 deg and 6.5 deg. I conclude that the TLM seems to be compatible with the data.

Titarchuk, Lev↗

Repelling, binding, and oscillating of two-particle discrete-time quantum walks

In this paper, we investigate the effects of particle–particle interaction and static force on the propagation of probability distribution in two-particle discrete-time quantum walk, where the interaction and static force are expressed as a collision phase and a linear position-dependent phase, respectively. It is found that the interaction can lead to boson repelling and fermion binding. The static force also induces Bloch oscillation and results in a continuous transition from boson bunching to fermion anti-bunching. The interplays of particle–particle interaction, quantum interference, and Bloch oscillation provide a versatile framework to study and simulate many-particle physics via quantum walks.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Navier-Stokes prediction of large-amplitude forced and free-to-roll delta-wing oscillations

The three-dimensional Reynolds-averaged, Navier-Stokes (RANS) equations are used to numerically simulate nonsteady vortical flow about a 65 degree sweep delta wing at 30 degrees angle of attack. Two large-amplitude, high-rate, forced-roll motions and a damped free-to-roll motion are presented. The free-to-roll motion is computed by coupling the time-dependent RANS equations to the flight dynamic equation of motion. The computed results are compared with experimental forces, moments, and roll-angle time histories. The overall agreement is good. Vortex breakdown is present in each case, which causes significant time lags in the vortex breakdown motions relative to the body motions. This behavior strongly influences the dynamic forces and moments.

Chaderjian, Neal M.↗

Multicenter Higgs oscillators and Calogero model

We show that the spherical part of N-particle Calogero model describes, after exclusion of the center of mass, the motion of the particle on (N - 2)-dimensional sphere interacting with N(N - 1)/2 force centers with Higgs oscillator potential. In the case of four-particle system these force centers are located at the vertexes of cuboctahedron. The geometry of the five-particle case is also investigated.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Exact analytical solutions to the master equation of quantum Brownian motion for a general environment

Research Highlights: > We study the model of a quantum oscillator linearly coupled to a bath of oscillators. > We derive the master equation and solutions for general spectra and temperatures. > We generalize to cases with an external force and arbitrary number of oscillators. > Other derivations have incorrect diffusion and force response for nonlocal damping. > We give exact results for ohmic, sub-ohmic and supra-ohmic environments. - Abstract: We revisit the model of a quantum Brownian oscillator linearly coupled to an environment of quantum oscillators at finite temperature. By introducing a compact and particularly well-suited formulation, we give a rather quick and direct derivation of the master equation and its solutions for general spectral functions and arbitrary temperatures. The flexibility of our approach allows for an immediate generalization to cases with an external force and with an arbitrary number of Brownian oscillators. More importantly, we point out an important mathematical subtlety concerning boundary-value problems for integro-differential equations which led to incorrect master equation coefficients and impacts on the description of nonlocal dissipation effects in all earlier derivations. Furthermore, we provide explicit, exact analytical results for the master equation coefficients and its solutions in a wide variety of cases, including ohmic, sub-ohmic and supra-ohmic environments with a finite cut-off.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Changes in global vegetation activity and its driving factors during 1982–2013

Vegetation activity plays a crucial role in the global carbon cycle and climate. Many studies have examined recent changes in vegetation growth and the associated local climatic drivers. They revealed a global greening trend during the recent decades. However, few studies have analyzed how remote oceanic conditions affect land vegetation growth through atmospheric teleconnection, and the causes of the recent greening needs further investigation. Here in this study, we investigate the spatio-temporal variations (including trends) of vegetation activity using satellite data of growing-season normalized difference vegetation index (NDVI gs ), and examine their relationship to local and remote climate oscillations and external anthropogenic forcing by statistical means. As expected, there is an increasing trend in global-mean NDVI gs from 1982–2013, with significant greening over Europe and many other land areas. NDVI gs is temperature-limited at northern high-latitudes, but water-limited in arid and semi-arid regions, and radiation-limited in the Amazon and eastern and southern Asia. Globally, El Niño-Southern Oscillation (ENSO) is the leading climatic driver of interannual variability of NDVI gs , especially over southern and eastern Africa, eastern Australia, northeastern Asia, and northern South America. Consistent with previous modeling studies, a regression-based attribution analysis suggests that historical anthropogenic forcing (mainly increases in greenhouse gases) explains about two thirds of the NDVI gs trend from 1982 to 2013, with the rest coming mainly from the Atlantic Multi-decadal Oscillation (AMO). Contributions to the recent NDVI gs trend from ENSO and Pacific decadal variability and Artctic Oscillation appear to be small.

54 ENVIRONMENTAL SCIENCES↗

Dynamical phase interferometry of cold atoms in optical lattices

We study the propagation of cold-atom wave packets in an interferometer with a Mach-Zehnder topology based on the dynamical phase of Bloch oscillation in a weakly forced optical lattice with a narrow potential barrier that functions as a cold-atom wave-packet splitter. We calculate analytically the atomic wave function, and show that the expected number of atoms in the two outputs of the interferometer oscillates rapidly as a function of the angle between the potential barrier and the forcing direction with period proportional to the external potential difference across a lattice spacing divided by the lattice band energy scale. The interferometer can be used as a high-precision force probe whose principle of operation is different from current interferometers based on the overall position of Bloch oscillating wave packets.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Oscillating fluid power generator

A system and method for harvesting the kinetic energy of a fluid flow for power generation with a vertically oriented, aerodynamic wing structure comprising one or more airfoil elements pivotably attached to a mast. When activated by the moving fluid stream, the wing structure oscillates back and forth, generating lift first in one direction then in the opposite direction. This oscillating movement is converted to unidirectional rotational movement in order to provide motive power to an electricity generator. Unlike other oscillating devices, this device is designed to harvest the maximum aerodynamic lift forces available for a given oscillation cycle. Because the system is not subjected to the same intense forces and stresses as turbine systems, it can be constructed less expensively, reducing the cost of electricity generation. The system can be grouped in more compact clusters, be less evident in the landscape, and present reduced risk to avian species.

30 DIRECT ENERGY CONVERSION↗

Directed coherent transport due to the Bloch oscillation in two dimensions

We point out that in higher dimensions, in contrast to the one-dimensional case considered usually, Bloch oscillation driven by a static force can induce transport of the wave packet. The wave packet oscillates constantly, but on a larger time scale it drifts at a constantly velocity permanently. As a noteworthy feature, the net transport in the long run is always normal to the external force and thus controlled by it. We verify this prediction numerically and discuss its experimental realization both with cold atoms in optical lattices and with two-dimensional photonic lattices.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

The force exerted by a fireball

The force exerted by a fireball was deduced both from the change of the equilibrium position of a pendulum and from the change in the pendulum oscillation period. That measured force was found to be several times larger than the force exerted by the ions accelerated across the double layer that is assumed to surround the fireball. The force enhancement that is expected by ion-neutral collisions in the fireball is evaluated to be too small to explain the measured enhanced force. Gas pressure increase, due to gas heating through electron-neutral collisions, as recently suggested [Stenzel et al., J. Appl. Phys. 109, 113305 (2011)], is examined as the source for the force enhancement.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Acoustic forcing of a liquid drop

The development of systems such as acoustic levitation chambers will allow for the positioning and manipulation of material samples (drops) in a microgravity environment. This provides the capability for fundamental studies in droplet dynamics as well as containerless processing work. Such systems use acoustic radiation pressure forces to position or to further manipulate (e.g., oscillate) the sample. The primary objective was to determine the effect of a viscous acoustic field/tangential radiation pressure forcing on drop oscillations. To this end, the viscous acoustic field is determined. Modified (forced) hydrodynamic field equations which result from a consistent perturbation expansion scheme are solved. This is done in the separate cases of an unmodulated and a modulated acoustic field. The effect of the tangential radiation stress on the hydrodynamic field (drop oscillations) is found to manifest as a correction to the velocity field in a sublayer region near the drop/host interface. Moreover, the forcing due to the radiation pressure vector at the interface is modified by inclusion of tangential stresses.

Lyell, M. J.↗

Simulation of the Interaction of a Magnetic Resonance Force Microscope Probe with a Ferromagnetic Sample

We propose an algorithm and present results of micromagnetic simulation of the resonant response of a probe pickup (cantilever) of a magnetic resonance force microscope. Simulation of induced oscillations of sample magnetization makes it possible to calculate the varying component of the force exerted on the probe by the sample and to construct spectra in the form of dependences of the amplitude of oscillations of the cantilever on the external magnetic field strength. Simulation of time dependences of all magnetization field components makes it possible to analyze the spatial distributions of spin-wave resonances of samples. For test objects in the form of rectangular permalloy microstrips, good agreement between model and experimental spectra is achieved.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Simultaneous transverse oscillations of a prominence and a filament and longitudinal oscillation of another filament induced by a single shock wave

We present the first stereoscopic and Doppler observations of simultaneous transverse oscillations of a prominence and a filament and longitudinal oscillation of another filament launched by a single shock wave. Using Hα Doppler observations, we derive the three-dimensional oscillation velocities at different heights along the prominence axis. The results indicate that the prominence has a larger oscillation amplitude and damping time at higher altitude, but the periods at different heights are the same (i.e., 13.5 minutes). This suggests that the prominence oscillates like a linear vertical rigid body with one end anchored on the Sun. One of the filaments shows weak transverse oscillation after the passing of the shock, which is possibly due to the low altitude of the filament and the weakening (due to reflection) of the shock wave before the interaction. Large-amplitude longitudinal oscillation is observed in the other filament after the passing of the shock wave. The velocity amplitude and period are about 26.8 km s{sup –1} and 80.3 minutes, respectively. We propose that the orientation of a filament or prominence relative to the normal vector of the incoming shock should be an important factor for launching transverse or longitudinal filament oscillations. In addition, the restoring forces of the transverse prominence are most likely due to the coupling of gravity and magnetic tension of the supporting magnetic field, while that for the longitudinal filament oscillation is probably the resultant force of gravity and magnetic pressure.

79 ASTRONOMY AND ASTROPHYSICS↗

Controlling the betatron oscillations of a wakefield-accelerated electron beam by temporally asymmetric laser pulses

Based on two-dimensional particle-in-cell simulations, we investigated the electron beam's transverse oscillations by temporally asymmetric laser pulses in laser wakefield acceleration. Of particular interest in this article are the effects of ultrashort laser pulses having sharp rising and slow falling time scales. In this situation, the accelerated electron beam interacts directly with the laser field and undergoes transverse oscillations due to a phase-slip with the laser field. This oscillation can be matched with the betatron oscillation due to the focusing force of the ions, which can lead to a large transverse oscillation amplitude due to the resonance between them. Furthermore, in this case, the electron beam can be microbunched at the laser wavelength, which may provide the possibility for generation of a coherent synchrotron radiation.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Simulations of vertical displacement oscillatory modes and global Alfvén Eigenmodes in JET geometry

Vertical Displacement Oscillatory Modes (VDOM), with frequency in the Alfvén range, are natural modes of oscillation of magnetically confined laboratory plasmas with elongated cross-section. These axisymmetric modes arise from the interaction between the plasma current, which is in equilibrium with currents flowing in external coils, and perturbed currents induced on a nearby conducting wall. The restoring force exerted by these perturbed currents on the vertical motion of the plasma column leads to its oscillatory behavior. An analytic model for VDOM was proposed based on an idealized 'straight tokamak' equilibrium with uniform equilibrium current density. This article introduces the first numerical simulations of VDOM in a realistic JET tokamak configuration, using the extended-MHD code NIMROD and drawing comparisons with Global Alfvén Eigenmodes (GAE). The results show qualitative agreement with analytic predictions regarding mode frequency and radial structure, supporting the identification of VDOM as a fundamental oscillation mode in tokamak plasmas. VDOM and GAE are modeled in a representative JET discharge, where axisymmetric perturbations with toroidal mode number n = 0 driven unstable by fast ions were observed. The two modes are examined separately using a forced oscillator within the NIMROD code, which enables a comparison of their characteristics and helps identify the experimentally observed mode possibly as a GAE.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗

Influence of Tool Runout on Force Measurement During Internal Void Monitoring for Friction Stir Welding of 6061-T6 Aluminum

Abstract The goal of this research was to examine how altering the amount of friction stir tool eccentricity while controlling the amount of slant in the tool shoulder (drivers of oscillatory process forces) effects the generation of process force transients during sub-surface void interaction. The knowledge gained will help improve the accuracy of force-based void monitoring methods that have the potential to reduce the need for post-weld inspection. Process force transients during sub-surface void formation were examined for multiple tools with varying magnitudes of kinematic runout. The eccentric motion of the tool produced oscillations in the process forces at the tools rotational frequency that became distorted when features (flats) on the tool probe interacted with voided volumes, generating an amplitude in the force signals at three times the tool rotational frequency (for three-flat tools). A larger tool eccentricity generates a larger amplitude in the force signals at the tool’s rotational frequency that holds a larger potential to create a distortion during void interaction. It was determined that once void becomes large enough to produce an interaction that generates an amplitude at the third harmonic larger than 30% of the amplitude at the rotational frequency in a weld with no interaction (amplitude solely at rotational frequency), the trailing edge of the tool shoulder cannot fully consolidate the void, i.e., it will remain in the final weld. Additionally, once the void exceeds a certain size, the amplitudes of the third harmonics saturate at 70% of the amplitude at the rotational frequency during full consolidation. The interaction between the eccentric probe and sub-surface void was isolated by ensuring any geometric imperfection in the shoulder (slant) with respect to the rotational axis was removed. The results suggest that geometric imperfections (eccentricity and slant) with respect to the tool’s rotational axis must be known when developing a void monitoring method from force transients of this nature.

Engineering↗