Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “FERROMAGNETIC MATERIALS”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Surface evolution of amorphous nanocolumns of Fe-Ni grown by oblique angle deposition

The growth of Fe-Ni based amorphous nanocolumns has been studied using atomic force microscopy. The root mean square roughness of the film surface increased with the deposition time but showed a little change at higher deposition time. It was found that the separation between the nanostructures increased sharply during the initial stages of growth and the change was less pronounced at higher deposition time. During the initial stages of the column growth, a roughening process due to self shadowing is dominant and, as the deposition time increases, a smoothening mechanism takes place due to the surface diffusion of adatoms.

36 MATERIALS SCIENCE↗

Epitaxial growth and thermal stability of Fe{sub 4}N film on TiN buffered Si(001) substrate

Epitaxial Fe{sub 4}N thin films were grown on TiN buffered Si(001) substrate by dc reactive sputtering deposition at different substrate temperatures. Fe{sub 4}N films epitaxially grew on TiN within the substrate temperature range from 250 to 350 deg. C. Lower than 250 deg. C there will be some other Fe{sub x}N compounds formed and higher than 400 deg. C there will be only Fe left. Fe{sub 4}N is metastable and the postannealing process in vacuum will decompose Fe{sub 4}N film to Fe. However, introducing 30% N{sub 2} in the postannealing atmosphere can stabilize the Fe{sub 4}N up to 350 deg. C in the (Ar,N{sub 2}) gas mixture. The surface roughness of the epitaxial Fe{sub 4}N films decreases with film thickness. There is in-plane biaxial magnetic anisotropy of epitaxial Fe{sub 4}N(001) on Si(001) with the [100] easy direction.

36 MATERIALS SCIENCE↗

Site-preference and valency for rare-earth sites in (R-Ce)(2)Fe14B magnets

Rare-earth (R) permanent magnets of R2Fe14B have technological importance due to their high energy products, and they have two R-sites (Wyckoff 4f and 4g, with four-fold multiplicity) that affect chemistry and valence. Designing magnetic behavior and stability via alloying is technologically relevant to reduce critical (expensive) R-content while retaining key properties; cerium, an abundant (cheap) R-element, offers this potential. We calculate magnetic properties and Ce site preference in (R1-xCex)(2)Fe14B [R = La, Nd] using density functional theory (DFT) methods-including a DFT+U scheme to treat localized 4f-electrons. Fe moments compare well with neutron data-almost unaffected by Hubbard U, and weakly affected by spin-orbit coupling. In La2Fe14B, Ce alloys for 0 <= x <= 1 and prefers smaller R(4f) sites, as observed, a trend we find unaffected by valence. Whereas, in Nd2Fe14B, Ce is predicted to have limited alloying (x <= 0.3) with a preference for larger R(4g) sites, resulting in weak partial ordering and segregation. The Curie temperatures versus x for (Nd, Ce) were predicted for a typical sample processing and verified experimentally. (C) 2013 American Institute of Physics. [http://dx.doi.org/10.1063/1.4789527]

Alam, A↗

Setting temperature effect in polycrystalline exchange-biased IrMn/CoFe bilayers

We study the effect of atomic interdiffusion on the exchange bias of polycrystalline IrMn/({sup 57}Fe + CoFe) multilayers due to the thermal setting process of exchange coupling during field annealing. Depth-resolved {sup 57}Fe conversion electron Moessbauer spectroscopy was used to quantify atomic interdiffusion. Vibrating sample magnetometry was used to monitor the variation of exchange bias and magnetisation. It was found that interface sharpness is only affected above {approx}350 Degree-Sign C. Three different stages for the setting of exchange bias can be inferred from our results. At the lower setting temperatures (up to 350 Degree-Sign C), the effect of field annealing involves alignment of spins and interfacial coupling due to the setting of both antiferromagnetic (AF) bulk and interface without significant interdiffusion. At a second stage (350-450 Degree-Sign C), where AF ordering dominates over diffusion effects, atomic migration and increased setting of AF spins co-exist to produce a peak in exchange bias field and coercivity. On a third stage (>450 Degree-Sign C), severe chemical intermixing reduces significantly the F/AF coupling.

36 MATERIALS SCIENCE↗

Relaxorlike dielectric behavior and weak ferromagnetism in YFeO{sub 3} ceramics

Dielectric characteristics of YFeO{sub 3} antiferromagnetic ceramics were evaluated over broad temperature and frequency ranges. Two dielectric relaxations were observed at low and high temperatures, respectively, and a dielectric constant step was detected between them. The low temperature dielectric relaxation was an intrinsic thermally activated process following the Arrhenius law with the activation energy very close to that for electronic ferroelectrics, while the high temperature dielectric relaxation was related to the point defect since it could be significantly suppressed by O{sub 2} annealing. M-H hysteresis loop was detected at room temperature, and this indicated the weak ferromagnetism in YFeO{sub 3} ceramics.

36 MATERIALS SCIENCE↗

Perspective: Emergent magnetic phenomena at interfaces

The discovery of emergent magnetic phenomena is of fundamental and technological interest. This perspective highlights recent promising examples of emergent ferromagnetism at complex oxide interfaces in the context of spin based electronics.

36 MATERIALS SCIENCE↗

The magnetic ordering in high magnetoresistance Mn-doped ZnO thin films

Here, we studied the nature of magnetic ordering in Mn-doped ZnO thin films that exhibited ferromagnetism at 300 K and superparamagnetism at 5 K. We directly inter-related the magnetisation and magnetoresistance by invoking the polaronpercolation theory and variable range of hopping conduction below the metal-to-insulator transition. By obtaining a qualitative agreement between these two models, we attribute the ferromagnetism to the s-d exchange-induced spin splitting that was indicated by large positive magnetoresistance (~40 %). Low temperature superparamagnetism was attributed to the localization of carriers and non-interacting polaron clusters. This analysis can assist in understanding the presence or absence of ferromagnetism in doped/un-doped ZnO.

36 MATERIALS SCIENCE↗

Systematic investigation of structural and magnetic properties in molecular beam epitaxial growth of metastable zinc-blende CrTe toward half-metallicity

We report a systematic investigation on the structural and magnetic properties of molecular-beam epitaxial growth of CrTe thin films with different layer thicknesses and Cr/Te flux ratios. A phase diagram of the growth parameters is established based on the detailed analyses of the reflection high-energy electron diffraction patterns, atomic force microscopy, and magnetization. Our high-resolution transmission electron microscopy results show that under appropriate growth conditions, a metastable zinc-blende (ZB) phase of CrTe film can be achieved with a nominal thickness of 5 nm. The magnetic properties of ZB CrTe exhibit a strong in-plane anisotropy with an easy axis along the [001] direction and hard axes along the [011] and [011] directions. Correspondingly, the uniaxial (K{sub U}) and cubic (K{sub C}) anisotropy constants are obtained through the fitting of the [011] hard-axis direction. The temperature dependence of the remanent magnetization indicates the T{sub C}{approx}100 K of ZB CrTe is attained.

36 MATERIALS SCIENCE↗

Fabrication of MgO-based magnetic tunnel junctions with CoCrPt perpendicularly magnetized electrodes

The applicability of perpendicularly magnetized CoCrPt films to the MgO-based magnetic tunnel junctions (MTJs) was investigated. For this study, CoCrPt films deposited on the Ru buffer exhibited hcp(0002)-oriented growth by sputtering method using the low substrate temperature of 250 deg. C, low saturation magnetization of around 360 emu/cm{sup 3}, and high magnetic anisotropy field of 6 kOe, which is sufficient to retain the thermal stability of the magnetization direction. The MgO-based MTJs with a synthetic ferrimagnetlike structure were fabricated: CoFe was coupled magnetically with CoCrPt through the thin Ru layer. Transport properties with a magnetic field applied perpendicular to the film plane revealed a tunnel magnetoresistance ratio of about 6% at room temperature.

36 MATERIALS SCIENCE↗

Magnetism and transport properties of epitaxial Fe-Ga thin films on GaAs(001)

Epitaxial Fe-Ga thin films in disordered bcc {alpha}-Fe crystal structure (A2) have been grown on GaAs(001) by molecular beam epitaxy. The saturated magnetization (M{sub S}) decreased from 1371 to 1105 kA/m with increasing Ga concentration from 10.5 to 24.3 % at room temperature. The lattice parameter increased with the increase in Ga content because of the larger atomic radius of Ga atom than that of Fe. The increase in carrier density with Ga content caused in lower resistivity.

36 MATERIALS SCIENCE↗

Soft magnetic properties of (Ni{sub 80}Fe{sub 20}){sub 1-x}(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x} films for high frequency applications

A series of (Ni{sub 80}Fe{sub 20}){sub 1-x}(Ni{sub 0.5}Zn{sub 0.5}Fe{sub 2}O{sub 4}){sub x} films were fabricated on Si substrates by means of radio frequency magnetron sputtering and the electrical and magnetic properties were studied. Optimal films with the desired properties of low coercivity H{sub c} {approx} 4 Oe, high saturation magnetization 4{pi}Ms {approx} 14.5 kG, and high electrical resistivity {rho} {approx} 1500 {mu}{Omega} cm were obtained. The permeability spectra measured shows that its natural ferromagnetic resonant frequency was about 3.4 GHz. The tested results shown that the sputtering power had an important effect on the films properties and that it can be convenient to adjust the natural ferromagnetic resonant frequency of the films.

36 MATERIALS SCIENCE↗

Microscopic model versus systematic low-energy effective field theory for a doped quantum ferromagnet

We consider a microscopic model for a doped quantum ferromagnet as a test case for the systematic low-energy effective field theory for magnons and holes, which is constructed in complete analogy to the case of quantum antiferromagnets. In contrast to antiferromagnets, for which the effective field theory approach can be tested only numerically, in the ferromagnetic case, both the microscopic and the effective theory can be solved analytically. In this way, the low-energy parameters of the effective theory are determined exactly by matching to the underlying microscopic model. The low-energy behavior at half-filling as well as in the single- and two-hole sectors is described exactly by the systematic low-energy effective field theory. In particular, for weakly bound two-hole states the effective field theory even works beyond perturbation theory. This lends strong support to the quantitative success of the systematic low-energy effective field theory method not only in the ferromagnetic but also in the physically most interesting antiferromagnetic case.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Structural, Optical, and Magnetic Properties of Nd-Doped CeO{sub 2} Nanoparticles Codoped with Transition Metal Elements (Cu, Zn, Cr)

In the present work, pure CeO{sub 2}, neodymium-doped CeO{sub 2}, and neodymium and transition metal element (Cu, Zn, Cr)-codoped CeO{sub 2} nanoparticles were synthesized by an auto-combustion method and annealed at 700 {sup ∘}C. The X-ray diffraction (XRD) studies revealed that all the samples exhibited a single-phase cubic fluorite structure with the incorporation of respective dopant ions into the CeO{sub 2} lattice. The scanning electron microscopy (SEM) images displayed the prepared nanoparticles which had an irregular flaky structure with large agglomerations. The Fourier transform Raman (FT-Raman) spectroscopy analysis revealed the increased oxygen vacancy defects in CeO{sub 2} host after doping and codoping with neodymium and transition metal elements. Ultraviolet-diffuse reflectance spectroscopy (UV-DRS) studies revealed the decrease in bandgap values in doped and codoped samples compared to pure CeO{sub 2} sample. The Fourier transform infrared spectroscopy (FTIR) studies revealed the presence of functional groups in the prepared samples. Photoluminescence (PL) spectroscopy analysis reported the decreased luminescence intensities of Nd-doped and neodymium and transition metal-codoped CeO{sub 2} nanoparticles. The vibrating sample magnetometer (VSM) results depicted that all the samples exhibited room-temperature ferromagnetism.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Synthesis, magnetic and dielectric characterization of nanocrystalline solid solutions of In{sub 2−x}Ni{sub x}O{sub 3} (x = 0.05, 0.10 and 0.15)

Graphical abstract: Monophasic and crystalline In{sub 2−x}Ni{sub x}O{sub 3} nanoparticles of size 8–15 nm have been synthesized solvothermally and showed red shift in energy band gap which decreases on increasing Ni{sup 2+} concentration in In{sub 2}O{sub 3} host lattice. - Highlights: • Monophasic Ni-doped In{sub 2}O{sub 3} nanoparticles by solvothermal method for first time. • Plausible reaction mechanism using thermogravimetric analysis. • High surface area with small particle size obtained. • Solid solutions exhibit paramagnetism with very weak antiferromagnetic interactions. - Abstract: In{sub 2−x}Ni{sub x}O{sub 3} (x = 0.05, 0.10 and 0.15) nanoparticles were successfully synthesized by solvothermal method by the thermal decomposition of oxalate precursor at 450 °C for the first time. X-ray diffraction studies showed the formation of highly crystalline and monophasic cubic structure of In{sub 2}O{sub 3} which is attributed to the formation of solid solution. These nanoparticles show good optical transmittance in the visible region. Optical measurements showed an energy band gap which decreases with increasing Ni concentration. The grain size decreases from 15 nm to 8 nm and surface area increases from 90 to 254 m{sup 2} g{sup −1} on increasing the Ni concentration. High dielectric constant and dielectric loss has been obtained which indicates the conducting nature of these solid solutions. Magnetic measurements showed that the samples are strong paramagnetic in nature with very weak antiferromagnetic interactions. No evidence of ferromagnetism is observed for these solid solutions at room temperature.

36 MATERIALS SCIENCE↗

Synthesis and magnetic properties of Cu doped ZnO nanorods via radio frequency plasma deposition

Well-aligned Cu doped ZnO nanorods were synthesized by simple radio frequency plasma deposition in the absence of extra catalysts. The synthesized nanorods having a typical average diameter of about 60 nm, were about 700 nm in length and well aligned along the normal direction of the substrate. Magnetic measurements indicate that the nanorods are ferromagnetic at room temperature. The presence of considerable oxygen vacancies in the nanorods does allow possible defect mediated mechanisms (e.g., bound magnetic polarons) for mediating exchange coupling of the dopant Cu ions resulting in room temperature ferromagnetism.

36 MATERIALS SCIENCE↗

Processing and Switching Behavior of Multiferroic (Bi{sub 0.7}Dy{sub 0.3}FeO{sub 3}) Microstructure Arrays

Multiferroic systems, which exhibit coexistence of both ferroelectric and ferromagnetic ordering at room temperature, are of great importance for a variety of device applications. Due to coupling between the two order parameters, it is possible to bring polarization in the multiferroic systems by either means (applying electric or magnetic field). We have been successful in developing material (Bi{sub 0.7}Dy{sub 0.3}FeO{sub 3}) which exhibits the multiferroic behavior at room temperature with significant coupling in bulk as well as thin films. We therefore propose to develop a procedure to fabricate multiple memory devices using this new compound.

36 MATERIALS SCIENCE↗

Enhanced heteroepitaxial growth of CoCrPt-SiO{sub 2} perpendicular magnetic recording media on optimized Ru intermediate layers

The crystallographic growth, interfacial roughness, and magnetic properties of CoCrPt-SiO{sub 2} perpendicular magnetic recording media prepared on various types of Ru intermediate growth layers were systematically investigated based on high angle and omega offset x-ray diffraction scans, rocking curve scans, synchrotron radiation based grazing incidence reflectivity scans, and magneto-optical Kerr hysteresis loops. For samples that make use of one Ru growth layer, voltage bias applied on the Ru layer was seen to have two observable effects: (1) the dispersion in the Ru(00{center_dot}2) perpendicular texture increased, but that of the Co(00{center_dot}2) remained unchanged, leading to identical layered growth and (2) the in-plane a-lattice parameter of the Ru decreased leading to enhanced heteroepitaxy with the Co. There was no significant change in the Ru-Co interfacial roughness with changing the bias on the Ru layer. The bias effect can be used to optimize the design of the Ru intermediate layers. A scheme that makes use of two Ru growth layers consisting of a bottom Ru layer prepared under zero bias, which is inserted below a second Ru layer prepared under biased conditions, is shown to lead to significant benefits such as improved texture without affecting the magnetic properties. This is due to the different functional roles ascribed to each of the Ru growth layers.

36 MATERIALS SCIENCE↗

Stripe domains and spin reorientation transition in Fe{sub 78}B{sub 13}Si{sub 9} thin films produced by rf sputtering

Magnetic thin films have been obtained by rf sputtering from an amorphous Fe{sub 78}B{sub 13}Si{sub 9} target. The samples have been produced with thickness t ranging in the interval 25-1000 nm. Microstructural investigations indicate that the films have different microstructures varying from fully amorphous to partially nanocrystalline with increasing t. Magnetic hysteresis loops have been measured by means of high-sensitive magnetometry. A tailorable spin reorientation transition (SRT) from in-plane single-domain-like to out-of-plane multidomain state with increasing film thickness was observed. Magnetic force microscopy images have been obtained for all samples indicating that for t{<=}80 nm the magnetization lies in the film plane. For larger thickness, a stripe domain pattern has been observed, indicating the presence of a magnetic anisotropy axis perpendicular to the film plane. In this work, SRT and stripe domain structure have been studied as a function of thickness and sample microstructure.

36 MATERIALS SCIENCE↗