Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Experimental physics”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Muon Time-of-Flight studies for cosmic background rejection in the Short Baseline Near Detector

The Short-Baseline Neutrino (SBN) program at Fermilab is a cutting-edge project in experimental neutrino physics. One of its main goals is to systematically investigate the possible existence of eV-scale sterile neutrinos. This phenomenon has been hypothesized to explain some anomalies found in short-range experiments and, if confirmed, would imply a substantial extension of the Standard Model. SBN also offers an important opportunity to deepen the understanding of neutrino-nucleus interactions in the GeV energy range, through the use of Liquid Argon Time Projection Chambers (LArTPC) detectors, a fundamental technology also for the future DUNE experiment. The SBN experimental infrastructure consists of three detectors aligned along the Booster Neutrino Beamline at Fermilab. Among them, the detector located closest to the neutrino source, SBND (Short-Baseline Near Detector), positioned approximately 110 meters from the target, plays a key role in directly characterizing the initial neutrino flux. This allows for a direct comparison with the measurements from the far detector, ICARUS, located about 600 meters from the source, in order to search for potential signs of anomalous neutrino oscillations. My master's thesis focuses on the commissioning and characterization activities of the SBND detector, with particular reference to the Cosmic Ray Tagger (CRT). The CRT is a subsystem for identifying and rejecting events produced by cosmic rays, which constitute the main source of background for surface experiments like SBND. The activity began with the commissioning of the final components of the detector, as well as their validation to verify their correct functioning and signal acquisition. A central part of my work involved studying the veto efficiency of the CRT system, analyzing the rate of cosmic ray-induced events to quantify any loss of neutrino-induced events caused by cosmic background. This allowed for a more precise evaluation of the systematic impact of the CRT on the useful physics sample. A further phase of my analysis involved an in-depth study of the temporal correlation between the CRT signals and those acquired by the LArTPC's internal photodetector system, consisting of photomultiplier tubes and X-ARAPUCA devices. The objective is to explore the possibility of using combined temporal information as an additional criterion for discriminating between cosmic signals and signals genuinely due to neutrino interaction. Preliminary results indicate the presence of characteristic temporal signatures that could be exploited to improve event selection and increase the purity of the neutrino-induced sample. These methodologies will certainly contribute to the optimization of SBND analysis strategies and, more generally, to a better understanding of background mechanisms in next-generation LArTPC experiments.

Corallo, Annalea [Ferrara U.]↗

An intense, few-cycle source in the long-wave infrared

For the last several decades, the wavelength range accessible for strong-field, few-cycle studies has remained limited to the visible, near infrared and mid-wave infrared regimes. In particular, sources in the long-wave infrared have been lacking. We report the development of a 1 kHz, few-cycle laser source with up to a 9 μm central wavelength and gigawatt peak powers. When focused, this source can ionize gas targets, which we demonstrate here through the ionization of atomic xenon at wavelengths ranging from 5 μm to 9 μm. This opens up new opportunities for fundamental atomic and molecular physics, enabling experimental tests of strong-field ionization theories in the extreme long-wavelength, few-cycle limit and the direct excitation of vibrational transitions in organic molecules.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Nucleosynthesis for Science and Security: Preparing for a Nuclear and Chemical Sciences Program at FRIB

Nuclear reactions are vital to nuclear science and its many applications: they are the mechanism for forging elements in the cosmos, the source of energy for both stars and nuclear weapons, the principal probes used to study nuclear properties, and the primary diagnostic signatures for stockpile stewardship and nuclear forensics. Yet, most reaction experiments have been confined to the small fraction of all nuclei that are stable, and a theoretical foundation for reactions with a true predictive capability is lacking. The Facility for Rare Isotope Beams (FRIB), the flagship U.S. facility in low-energy nuclear science, will offer the opportunity to rectify the long-standing gap in understanding reactions on radioactive nuclei. The work performed in this LDRD project brought together the experimental nuclear physics, radiochemistry, nuclear theory, and high-performance computing expertise of the Nuclear and Chemical Sciences Division to develop new techniques that will be needed to exploit FRIB beams to better understand nuclear reactions. Novel isotope-harvesting techniques were developed to demonstrate that samples could be collected at the National Superconducting Cyclotron Laboratory (NSCL) at Michigan State University (the facility which FRIB builds upon) for direct measurements of long-lived radioisotopes. For isotopes too short lived for direct measurements, indirect approaches were developed that would ultimately be used with high-intensity FRIB radioactive beams. Finally, to better interpret experimental results and reliably extend predictions beyond the available data, a foundation was established for a fully microscopic and unified description of the structure, interactions, and dynamics of two reacting nuclei that moves beyond empirical models. This work has positioned the team for a leadership role at FRIB, enabling LLNL to maintain a world-class nuclear science program and to compete for future talent and funding, both of which are vital for continuing support of the laboratory’s stockpile stewardship mission.

42 ENGINEERING↗

Chandra and XMM-Newton: Atomic Data Needs For X-ray Astronomy

With the launches of the Chandra X-ray Observatory and XM M-Newton, high resolution X-ray spectra of cosmic sources are broadening our understanding of the physical conditions, such as temperature, density, Ionization state, and elemental abundances. X-ray emitting astrophysical plasmas can be generally classified by their dominant ionization mechanism, either collisional ionization or X-ray photoionization. The atomic data needs are significantly different for these two cases; however, for both cases it is important that we identify robust and accurate diagnostics and that we verify completeness of the broadband models. We discuss the status of tile atomic data currently used in atomic databases for X-ray astronomy, in view of theoretical and experimental atomic physics considerations. We will also discuss the application of these models to new astrophysical data.

Brickhouse, Nancy↗

A New Analytical Expression for Estimating the Adiabatic Temperature Rise in Lithium-Ion Batteries During High-Power Pulses

A coupled, thermal-electrochemical model is used to explain why the Joule heating assumption (i.e., I 2 R) does not provide a good representation of the temperature rise during high power pulses in lithium-ion batteries, even in cases where the reversible heat generation can be neglected. The poor agreement occurs because the internal resistance changes during the pulse due to the opposing effects of mass transport in the electrolyte, which raises the resistance, and heat generation (temperature rise), which lowers the resistance. These insights are used to propose a new analytical expression for predicting the temperature rise during adiabatic pulses with limited experimental and physical data. The expression accounts for thermal effects using a Taylor series expansion of an Arrhenius-type equation. It accounts for transport effects using an approximate solution to the one-dimensional diffusion equation. The new expression is shown to accurately estimate the simulated, adiabatic temperature rise across a range of loadings (1 to 4 mAh cm -2 ) and C-rates (1C to 10C) for cells containing LiNi 0.5 Mn 0.3 Co 0.2 O 2 positive electrodes and graphite negative electrodes. In conclusion, it is also shown to accurately estimate the experimental, adiabatic temperature rise measured for cells with LiFePO 4 positive electrodes and mesocarbon negative electrodes with minimal changes to the fitted parameters.

25 ENERGY STORAGE↗

Gravity-driven convection studies in compound semiconductor crystal growth by physical vapor transport

Experimental results are summarized, and it is pointed out that gravity-driven convection can alter the diffusive-advective mass transport behavior in the growth of crystals by physical vapor transport. Specially designed and constructed transparent furnaces are described which are being used to study the effects of gravity in the crystal growth of the compound semiconductors PbTe and CdTe. The theory underlying vapor transport behavior is reviewed, with attention given to the vapor-solid behavior of compound materials, to one-dimensional mass transport, and to gravity-induced (natural) convection. In the transparent furnaces, the quartz capillary tube mounted along the axis of the main quartz ampoule is used to measure the temperature at the growth surface (vapor-solid crystal interface) and the source, as well as the complete temperature profile along the axis of the tube. The light-pipe works to remove heat from the growth end of the ampoule by radiative heat transfer. The ampoules are sealed after being evacuated to the low 10 to the -8th torr range with a cryogenic vacuum pump.

Zoutendyk, J. A.↗

Extreme high vacuum for polarized electron sources

Nuclear physics experiments often require highly polarized electron beams to do precise measurements of the structure and size of nucleons and the nucleus, as well as for searches for physics beyond the standard model. Jefferson Lab?s electron source, with polarization near 90%, has been providing polarized electron beams for CEBAF for over two decades. Development is underway for polarized electron sources at MESA at Mainz and the Electron Ion Collider at Brookhaven National Lab, and there is potential for polarized electron beam in the future at facilities including the International Linear Collider, an electron upgrade at CERN, and the SuperKEKB collider in Japan. At Jefferson Lab there are even plans to make use of polarized electrons to make a polarized positron source for experimental nuclear physics. High polarization electron beams are generated using photoemission from strained superlattice GaAs based photocathodes, and photocathode lifetime is limited by the ionization of residual gas in the system, which is then accelerated into the photocathode. Extreme high vacuum (near 1x10-10 Pa) is required to operate the Jefferson Lab polarized electron source with an acceptable lifetime, and the upcoming projects will need various combinations of higher current, higher bunch charge and longer photocathode lifetimes. To meet the vacuum requirements for polarized electron sources, every component for a polarized electron source must be optimized, including chamber materials, pumps, bakeout procedure and the high voltage electrode geometry and processing. Each change in these components must be evaluated offline before being used in the accelerator, and effects on pressure are difficult to evaluate even using XHV-optimized hot filament ionization gauges. In fact, we do not get a final evaluation of system modifications until an electron source is built, installed and lifetime measurements are made over the course of months or years of operation. I will be discussing the evolution of vacuum in the Jefferson Lab polarized source system toward XHV pressures and discuss the characterization and limitations measured for commercially available XHV vacuum gauges. Finally, I?ll present the effect of system pressure on photocathode lifetime and highlight how XHV pressure standards can benefit the ongoing efforts to improve vacuum for the next generation of polarized electron sources.

Stutzman, Marcy↗

Measurement of $Z/\gamma^* + b$-jet Production Cross section in $p\bar{p}$ collisions at $\sqrt{s}= 1.96$ TeV with the CDF detector

Processes at hadron colliders, such as the production of jets, are described by the Quantum Chromodynamics theory (QCD). Precise descriptions of processes involving jets in association with a vector boson have nowadays large relevance as they represent irreducible background to other Standard Model (SM) processes and searches for new physics. The experimental study and understanding of the b-jet production in association with a Z boson are crucial for many reasons. For one side, it is the most important background for a light Higgs boson decaying into a bottom-antibottom quark pair and produced in the ZH mode.This is one of the most promising channels for the Higgs search at Tevatron in particular since the latest results have excluded the high mass region (MH > 127 GeV/c 2 ). For another side the signature of b-jets and a Z boson is also background to new physics searches, such as supersymmetry, where a large coupling of the Higgs boson to bottom quarks is allowed. The produ ction cross section measurement of b-jets in events with a Z boson has already been performed at hadron colliders, at the Tevatron by CDF and D0 experiments and are now pursued at the LHC by ATLAS and CMS. In particular the CDF measurement was performed with only 2 fb -1 and was limited by the statistical uncertainty. This PhD thesis presents a new measurement of the $Z/\gamma^* + b$-jet production cross section using the complete dataset collected by CDF during the Run II. $Z/\gamma^*$ bosons are selected in the electron and muon decay modes and are required to have 66 < MZ < 116 GeV/c 2 while jets, reconstructed with the MidPoint algorithm, have to be central (|Y| < 1.5) with pT > 20 GeV/c . The per jet cross section is measured with respect to the $Z/\gamma^*$ inclusive and the $Z/\gamma^* +$ jets cross sections. Results are compared to leading order (LO) event generator plus parton shower and next-to-leading order (NLO) predictions corrected for non perturbative effects such as hadronizat ion and underlying event. Differential distributions as a fu! nction of jet transverse moment and jet rapidity are also presented together with the comparison to NLO pQCD predictions for different renormalization and factorization scales and various PDF sets.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Subscale maturation of advanced reactor technologies (SMART): A path forward for nuclear thermal propulsion fuel and reactor development

Nuclear Thermal Propulsion (NTP) systems are actively being developed for future crewed missions to Mars. NTP systems excel in missions where both high thrust and high specific impulse are required, but modern NTP systems currently do not have a Technology Readiness Level (TRL) high enough for use in crewed space exploration. TRLs are used to demonstrate the level of rigor with which a component/system has been tested/demonstrated for its intended use. While space systems technology in general must be qualified as a unit, nuclear technology must be first demonstrated to meet qualification level requirements both at the fuel (component) level and the reactor (subsystem) level. Here, in this paper, historic NTP development programs are surveyed to identify a testing and development strategy that can be effectively implemented to allow for NTP reactor development. Based on this strategy, required facilities to enable such activities are identified. Current domestic experimental capabilities to support NTP qualification are limited to separate effects testing of individual components. Separate effects testing is found extensively in historic NTP development efforts but is not sufficient for full fuel and reactor qualification. Combined effects testing allows for an accurate assessment of fuel performance but is not achievable for NTP conditions in existing facilities. Assessment of historic development programs suggests that an intermediate, subscale test facility is necessary to advance NTP TRLs. A solution to meet this need is proposed, namely the Subscale Maturation of Advanced Reactor Technologies (SMART) facility. SMART will mitigate risk to NTP development by enabling performance and reactor physics demonstrations of NTP subsystems. A SMART facility could be built by modifying existing nuclear test facilities, which may potentially enable schedule and cost savings. To pursue reactor qualification beyond the subscale, a new ground test facility will be necessary. This ground test facility should be developed concurrently with SMART to allow for the facility to be operational in time for expedited NTP engine demonstration.

73 NUCLEAR PHYSICS AND RADIATION PHYSICS↗

Measurement of multidifferential cross sections for dijet production in proton–proton collisions at $\sqrt{s}$ = 13 TeV

A measurement of the dijet production cross section is reported based on proton–proton collision data collected in 2016 at $\sqrt{s}$ = 13 TeV by the CMS experiment at the CERN LHC, corresponding to an integrated luminosity of up to 36.3 fb –1 . Jets are reconstructed with the anti-$k$ T algorithm for distance parameters of R = 0.4 and 0.8. Cross sections are measured double-differentially (2D) as a function of the largest absolute rapidity |y| max of the two jets with the highest transverse momenta $p$ T and their invariant mass $m$ 1,2 , and triple-differentially (3D) as a function of the rapidity separation $y$*, the total boost $y$ b , and either $m$ 1,2 or the average $p$ T of the two jets. The cross sections are unfolded to correct for detector effects and are compared with fixed-order calculations derived at next-to-next-to-leading order in perturbative quantum chromodynamics. The impact of the measurements on the parton distribution functions and the strong coupling constant at the mass of the Z boson is investigated, yielding a value of $α$ S ($m$ Z ) = 0.1179 ± 0.0019.

72 PHYSICS OF ELEMENTARY PARTICLES AND FIELDS↗

Bleed Roughness Mechanism

Suction applied through wall bleed is expected to reduce boundary-layer thickness and lead to a profile that can resist separation. However, experiments with rows of suction holes or slots have shown that the benefits of suction are not realized under certain circumstances. Lee, Sloan and Paynter attributed this to a 'bleed roughness', and modeled the phenomena using a modified inner-length scale with convective lag for the eddy viscosity. Test information was required to determine the roughness values at each Mach number and bleed rate. The present work used numerical calculation, subsonic and supersonic experimentation, and physical modeling were used to explore bleed roughness. It was found that the phenomena can exist in the absence of bleed, that it is a function of geometry and Mach number, and that it does not appear in low subsonic flow. The inner-length scale/convective lag approach was found to be inconsistent with recent physical observation. Alternate steady models for the roughness effect disagreed with mass flux trends and the choked flow limit, and suggested that non-steady mechanisms are present. While new supersonic experiments did exhibit low-frequency plenum oscillations, high-frequency unsteadiness associated with the orifice flow scale appears to be the cause of bleed roughness. In fact, boundary-layer calculations with an oscillatory orifice flow produced the same effect in the time-averaged downstream profile for incompressibile flow. A new empirical turbulence-model was proposed which increased the eddy viscosity throughout the entire boundary-layer by a constant which was calibrated using the zero-bleed profile. Preliminary calculations agreed with the experimental data. The model significantly reduced the test information required to determine roughness values for turbulence modeling, and provided prediction capability for supersonic bleed flows. An abstract of a thesis entitled 'Boundary-Layer Bleed Roughness' is included.

Russell, David A.↗

Observation of Dirac-like semi-metallic phase in NdSb

The search of new topological phases of matter is one of the new directions in condensed matter physics. Recent experimental realizations of Dirac semimetal phases pave the way to look for other exotic phases of matter in real materials. In this paper, we present a systematic angle-resolved photoemission spectroscopy (ARPES) study of NdSb, a potential candidate for hosting a Dirac semi-metal phase. Our studies reveal two hole-like Fermi surface pockets present at the zone center ($\Gamma$ ) point as well as two elliptical electron-pockets present in the zone corner (X) point of the Brillouin zone (BZ). Interestingly, Dirac-like linearly dispersive states are observed about the zone corner (X) point in NdSb. Our first-principles calculations agree with the experimentally observed bands at the $\Gamma$ point. Moreover, the Dirac-like state observed in NdSb may be a novel correlated state, not yet predicted in calculations. Finally, our study opens a new direction to look for Dirac semi-metal states in other members of the rare earth monopnictide family.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Atomic Data Needs for X-Ray Astronomy

This publication contains written versions of most of the invited talks presented at the workshop on Atomic Data Needs for X-ray Astronomy which was held at NASA's Goddard Space Flight Center on December 16-1 7 1999. The idea of hosting such a workshop emerged from an imminent need to update and complete current atomic datasets in anticipation of a new era of high quality X-ray spectra starting with the launching of Chandra and XMM-Newton observatories. At first, our vision of the workshop was of a short and limited attendance event, given the specialization of the topic. But it, was soon realized, from the response to the first workshop announcement, that the topic was of much interest, to researchers working in X-ray spectra (physicists and astronomers). As a result, the workshop grew to approximately 120 participants from several countries. The kind of atomic data that interests us are those parameters needed for analysis and modeling of spectra shortward of about about 100 A and relevant to ionic species of astronomical interest. The physical mechanisms of interest in the formation of spectra include photoionization. collisional ionization, recombination (radiative and dielectronic). collisional excitation (by electrons and protons). and radiative deexcitation. Unique to X-ray spectroscopy are the ionization and excitation processes from inner-closed shells. in addition to the challenges in interpret,ing the medium resolution (epsilon/delta epsilon is about 0.05 - 0.1) data obtained by current X-ray astronomy experiments. Line wavelengths are of interest too, particularly owing to the high resolution spectra from the new experiments. The workshop was divided into five major areas: Observational Spectroscopy, Theoretical Calculations of Atomic Data, Laboratory Measurements of Atomic Parameters. Spectra Modeling, and Atomic Databases. One comforting finding from the work shop is that the enthusiasm felt by X-ray astronomers about the new observational missions seems to be shared by theoretical and experimental physicists. Talks were presented about several exciting new projects and experimental and theoretical techniques devoted to X-ray spectroscopy. Simultaneously, several new tools for spectral analysis and modeling have recently been developed, together with improved atomic databases. These proceeding are expected to be of interests to producers and users of atomic data. Moreover. the contributions presented here have been written in a way that can be used by a general audience of scientists and graduate students in X-ray astronomy, modelling, and in computational and experimental atomic physics.

Kallman, Timothy↗

Alvin Tollestrup (1924-2020): A Life in Science

Alvin Tollestrup was a physicist and engineer of uncommon insight, intuition, and ingenuity who was revered in life for his essential leadership in the development of superconducting magnets for high-energy accelerators. He exhibited a matchless mastery of what he called freshman physics — though his mastery hardly ended there — and an uncanny gift for joining careful measurements with transparent calculations to reveal the essence of a subject. To watch Alvin at work was to learn how a true scientist formulates and solves a problem. He had other gifts: a nose for significant problems in both science and technology, the ability to draw talented people to an important cause, and a mentor's instinct for spotting gifted junior colleagues and helping them to mature as engineers and scientists. He was also good company! Alvin brought his keen vision about what constitutes important science, along with powerful ambition for the institution and for fundamental science, to considerat ions about Fermilab's future. His questions were uniformly probing, his opinions unfailingly interesting, and his appetite for work consistently inspiring. Among Alvin's many contributions to experimental particle physics — in a career that spanned seven decades — the rich achievements of the Collider Detector at Fermilab Collaboration, of which he was a founder and an enduring leader, stand out. The discovery of the top quark in 1995 earned worldwide acclaim. He reaped individual accolades as well, including election to the National Academy of Sciences. The National Medal of Technology, conferred in 1989, recognized Alvin’s leading role in developing superconducting magnets for Fermilab's Tevatron. Universities Research Association created the Tollestrup Award for Postdoctoral Research, commemorating Alvin's avuncular support for young scientists. This volume celebrates Alvin Tollestrup’s career and the rich, fulfilling life he led beyond the laboratory. Contributions from colleagues and family illuminate many facets of this remarka! ble figure. May old friends savor the memory of the Alvin they knew, while discovering less-familiar parts of his history; and may readers who did not have the opportunity to know Alvin firsthand find inspiration in his exemplary life in science.

Palmer, Mark↗

Investigation of radiation damage tolerance in interface-containing metallic nano structures

The proposed work seeks to conduct a basic study by applying experimental and computational methods to obtain quantitative influence of helium sink strength and proximity on He bubble nucleation and growth in He-irradiated nano-scale metallic structures, and the ensuing deformation mechanisms and mechanical properties. We utilized a combination of nano-scale in-situ tension and compression experiments on low-energy He-irradiated samples combined with site-specific microstructural characterization and modeling efforts. We also investigated the mechanical deformation of nano-architected materials, i.e. nanolattices which are comprised of 3-dimensional interwoven networks of hollow tubes, with the wall thickness in the nanometer range. This systematic approach will provide us with critical information for identifying key factors that govern He bubble nucleation and growth upon irradiation as a function of both sink strength and sink proximity through an experimentally-confirmed physical understanding. As an outgrowth of these efforts, we performed irradiations with self-ions (Ni 2+ ) on Ni-Al-Zr metallic glass nanolattices to assess their resilience against radiation damage rather than He-ion implantation. We focused our attention on studying individual bcc/fcc interfaces within a single nano structure (nano-pillar or a hollow tube): a single Fe (bcc)-Cu (fcc) boundary per pillar oriented perpendicular to the pillar axes, as well as pure bcc and fcc nano structures. Additional interfaces of interest include bcc/bcc and metal/metallic glass all within a single nano-structure volume. The model material systems are: (1) pure single crystalline Fe and Cu, (2) a single Fe (bcc)-Cu (fcc) boundary per nano structure (3) a single metal–metallic glass, all oriented non-parallel to the loading direction so that their fracture strength can be tested. A nano-fabrication approach, which involves e-beam lithography and templated electroplating, as well as two-photon lithography, was utilized, which enabled precise control of the initial microstructure control. Experimentally determined stress-strain relationships were enhanced by in-situ SEM observations coupled with TEM microstructural characterization of the same samples before and after deformation (irradiated and as-fabricated) and atomistic (MD) modeling. A comprehensive suite of experiments was conducted to quantitatively assess the key parameters for He bubble nucleation and growth by independently varying the sink strength, sink proximity, and He implantation temperature and dose. The implantations were conducted at Sandia and Los Alamos National Labs (CINT). Nano structuress containing He-enriched interfaces and irradiation-damaged microstructure were tested under uniaxial tension to assess embrittlement, resulting boundary strength, and deformation mechanisms. Results of this work helped identify which types of interfaces are particularly resilient against radiation damage.

36 MATERIALS SCIENCE↗

Observation of topological nodal fermion semimetal phase in ZrSiS

We present that unveiling new topological phases of matter is one of the current objectives in condensed matter physics. Recent experimental discoveries of Dirac and Weyl semimetals prompt the search for other exotic phases of matter. Here we present a systematic angle-resolved photoemission spectroscopy study of ZrSiS, a prime topological nodal semimetal candidate. Our wider Brillouin zone (BZ) mapping shows multiple Fermi surface pockets such as the diamond-shaped Fermi surface, elliptical-shaped Fermi surface, and a small electron pocket encircling at the zone center (Γ) point, the M point, and the X point of the BZ, respectively. We experimentally establish the spinless nodal fermion semimetal phase in ZrSiS, which is supported by our first-principles calculations. Our findings evidence that the ZrSiS-type of material family is a new platform on which to explore exotic states of quantum matter; these materials are expected to provide an avenue for engineering two-dimensional topological insulator systems.

36 MATERIALS SCIENCE↗

The photon analysis, delivery, and reduction system at the FERMI-Elettra free electron laser user facility

The FERMI-Elettra free electron laser (FEL) user facility is currently under construction at the Sincrotrone Trieste laboratory in Trieste (Italy). It will cover the wavelength range from 100 to about 5 nm in the fundamental and 3 or 1 nm using the third harmonic. We report the layout of the photon beam diagnostics section, the radiation transport system to the experimental area, and the photon beam distribution system. Due to the peculiar characteristics of the emitted FEL radiation (high peak power, short pulse length, and statistical variation of the emitted intensity and distribution), the realization of the diagnostics system is particularly challenging. The end users are interested in parameters such as the radiation pulse intensity and spectral distribution, as well as in the possibility to attenuate the intensity. In order to accomplish these tasks, a photon analysis, delivery, and reduction system is now under development and construction and is presented here. This system will work on-line producing pulse-resolved information and will let users keep track of the photon beam parameters during the experiments.

46 INSTRUMENTATION RELATED TO NUCLEAR SCIENCE AND ↗

Generalized parton distributions from the pseudodistribution approach on the lattice

Generalized parton distributions (GPDs) are key quantities for the description of a hadron’s three-dimensional structure. They are the current focus of all areas of hadronic physics—phenomenological, experimental and theoretical, including lattice QCD. Synergies between these areas are desirable and essential to achieve precise quantification and understanding of the structure of, particularly, nucleons, as the basic ingredients of matter. In this paper, we investigate, for the first time, the numerical implementation of the pseudodistribution approach for the extraction of zero-skewness GPDs for unpolarized quarks. Pseudodistributions are Euclidean parton correlators computable in lattice QCD that can be perturbatively matched to the light-cone parton distributions of interest. Although they are closely related to the quasidistributions and come from the same lattice-extracted matrix elements, they are, however, subject to different systematic effects. We use the data previously utilized for quasi-GPDs and extend it with other momentum transfers and nucleon boosts, in particular a higher one ( P 3 = 1.67 GeV ) with eightfold larger statistics than the largest one used for quasidistributions ( P 3 = 1.25 GeV ). We renormalize the matrix elements with a ratio scheme and match the resulting Ioffe time distributions to the light cone in coordinate space. The matched distributions are then used to reconstruct the x dependence with a fitting . We investigate some systematic effects related to this procedure, and we also compare the results with the ones obtained in the framework of quasi-GPDs. Our final results involve the invariant four-momentum transfer squared ( − t ) dependence of the flavor nonsinglet ( u − d ) H and E GPDs. Published by the American Physical Society 2024

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗