Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron diffraction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Quasi-two-dimensional electron gas at the interface of γ-Al{sub 2}O{sub 3}/SrTiO{sub 3} heterostructures grown by atomic layer deposition

We report the formation of a quasi-two-dimensional electron gas (2-DEG) at the interface of γ-Al{sub 2}O{sub 3}/TiO{sub 2}-terminated SrTiO{sub 3} (STO) grown by atomic layer deposition (ALD). The ALD growth of Al{sub 2}O{sub 3} on STO(001) single crystal substrates was performed at temperatures in the range of 200–345 °C. Trimethylaluminum and water were used as co-reactants. In situ reflection high energy electron diffraction, ex situ x-ray diffraction, and ex situ cross-sectional transmission electron microscopy were used to determine the crystallinity of the Al{sub 2}O{sub 3} films. As-deposited Al{sub 2}O{sub 3} films grown above 300 °C were crystalline with the γ-Al{sub 2}O{sub 3} phase. In situ x-ray photoelectron spectroscopy was used to characterize the Al{sub 2}O{sub 3}/STO interface, indicating that a Ti{sup 3+} feature in the Ti 2p spectrum of STO was formed after 2–3 ALD cycles of Al{sub 2}O{sub 3} at 345 °C and even after the exposure to trimethylaluminum alone at 300 and 345 °C. The interface quasi-2-DEG is metallic and exhibits mobility values of ∼4 and 3000 cm{sup 2} V{sup −1} s{sup −1} at room temperature and 15 K, respectively. The interfacial conductivity depended on the thickness of the Al{sub 2}O{sub 3} layer. The Ti{sup 3+} signal originated from the near-interfacial region and vanished after annealing in an oxygen environment.

36 MATERIALS SCIENCE↗

Shape-controlled synthesis and properties of dandelion-like manganese sulfide hollow spheres

Graphical abstract: Dandelion-like MnS hollow spheres assembled with nanorods could be successfully synthesized in large quantities through a simple and convenient hydrothermal synthetic method under mild conditions using soluble hydrated manganese chloride as Mn source, L-cysteine as both a precipitator and complexing reagent. The dandelion-like MnS hollow spheres might have potential applications in microdevices and magnetic cells. Highlights: ► MnS hollow spheres assembled with nanorods could be synthesized. ► The morphologies and sizes of final products could be controlled. ► Possible formation mechanism of MnS hollow spheres is proposed. -- Abstract: Dandelion-like gamma-manganese (II) sulfide (MnS) hollow spheres assembled with nanorods have been prepared via a hydrothermal process in the presence of L-cysteine and polyvinylpyrrolidone (PVP). L-cysteine was employed as not only sulfur source, but also coordinating reagent for the synthesis of dandelion-like MnS hollow spheres. The morphology, structure and properties of as-prepared products have been investigated in detail by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray spectroscopy (EDS), selected area electron diffraction (SAED), high-resolution transmission electron microscopy (HRTEM) and photoluminescence spectra (PL). The probable formation mechanism of as-prepared MnS hollow spheres was discussed on the basis of the experimental results. This strategy may provide an effective method for the fabrication of other metal sulfides hollow spheres.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Facile synthesis of self-assembled SnO nano-square sheets and hydrogen absorption characteristics

Graphical abstract: Display Omitted Highlights: ► Self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized. ► The average size of the nano-square sheets is about 200–400 nm. ► Direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. ► The hydrogen absorption capacity of as-synthesized material was 1.194 wt.% comparatively good. -- Abstract: Stannous oxide is an important functional material which contributes to a wide range of applications in energy storage and optoelectronic devices. In the present study, the single crystalline self-assembled stannous oxide (SnO) 2D nano-square sheets have been synthesized with template-free hydrothermal growth method. The morphology, composition and structure were characterized by field emission scanning electron microscopy (FESEM), transmission electron microscopy (TEM), high resolution transmission electron microscopy (HRTEM) with selected area electron diffraction (SAED), energy dispersive X-ray (EDX), X-ray diffraction (XRD) and Raman spectroscopy, respectively. FESEM results have illustrated that the size of self-assembled 3D hierarchical polygon-shape structure of SnO is in the range of 8–12 μm and the average size of the nano-square sheets is about 100 nm. X-ray diffraction (XRD) and selected area electron diffraction (SAED) patterns have revealed that the prepared SnO nano-square sheets exist in single-crystalline nature. Two Raman modes A{sub 1g} = 211 cm{sup −1} and B{sub 1g} = 113 cm{sup −1} were observed by Raman spectroscopy, which is consistent with nano tetragonal phase SnO. Furthermore, the chemical valence of Sn and relative atomic composition of as-prepared SnO have been confirmed by X-ray photoelectron spectroscopy (XPS). Ultraviolet–visible–near infrared spectrophotometry was used to study the transmittance behavior of SnO nano-structures and direct optical band gap of 3.16 eV was acquired by using Davis–Mott model. The first ever study on hydrogen absorption characteristics of SnO nano-square sheets performed at 373 K shows good absorption capacity of 1.194 wt.%.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Laws of evolution of slip trace pattern and its parameters with deformation in [1.8.12] – single crystals of Ni{sub 3}Fe alloy

The slip trace pattern of Ni{sub 3}Fe alloy single crystals with the short range order oriented for a single slip were investigated on replica at different stages of deformation using the transmission diffraction electron microscopy method. The connection of staging with the formation of slip trace pattern and the change of its parameters were established. The number of local areas where two or more slip systems work is increased with the change of stages. In these conditions the character of slip localization in the primary slip system is changed from the packets to the homogeneous distribution. The distributions of the distances between slip traces and the shear power in slip traces were plotted. The correlation between the average value of the shear power in the primary slip traces and the average distance between them was revealed in this work. It was established that the rates of the average value growth of the relative local shear and the shear power in the slip traces reach the largest values at the transition stage.

36 MATERIALS SCIENCE↗

Structural characterization of metastable hcp-Ni thin films epitaxially grown on Au(100) single-crystal underlayers

Ni(1120) epitaxial thin films with hcp structure were prepared on Au(100) single-crystal underlayers at 100 deg. C by ultra high vacuum molecular beam epitaxy. The detailed film structure is studied by in situ reflection high energy electron diffraction, x-ray diffraction, and transmission electron microscopy. The hcp-Ni film consists of two types of variants whose c-axes are rotated around the film normal by 90 deg. each other. An atomically sharp boundary is recognized between the film and the underlayer, where misfit dislocations are introduced. Presence of such dislocations seems to relieve the strain caused by the lattice mismatch between the film and the underlayer.

36 MATERIALS SCIENCE↗

A series of aluminum tungsten oxides crystallizing in a new ReO{sub 3}-related structure type

A series of new aluminum tungsten oxides with the general formula Al{sub 4}W{sub 2n}O{sub 6n+2} (n=4-7) was found and structurally characterized by electron diffraction, high-resolution transmission electron microscopy (HRTEM) and high angle annular dark field scanning transmission electron microscopy (HAADF-STEM). The structural model for Al{sub 4}W{sub 10}O{sub 32} (I4/mmm (space group no. 139); a{approx}0.375, c{approx}3.95 nm) consists of slabs of [5x{infinity}x{infinity}] corner-sharing WO{sub 6} octahedra that are connected via edge-sharing to AlO{sub 6} octahedra. Simulated HRTEM images agree well with the experimental ones and thus support the proposed structural model. The connection between adjacent slabs of WO{sub 3} via AlO{sub 6} octahedra represents a novel variant of crystallographic shear operation for ReO{sub 3}-type structures. The crystallites display a wide range of stacking sequences that are frequently intergrown with each other. - Graphical abstract: A structural model for Al{sub 4}W{sub 10}O{sub 32} was derived from electron diffraction, HRTEM and HAADF-STEM observations. The ReO{sub 3}-type structure of WO{sub 3} is sheared into five octahedra wide slabs that are connected via planes of AlO{sub 6} octahedra. Polytypes with different slab width exist and are frequently intergrown with each other.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Determination of dislocation density by electron backscatter diffraction and X-ray line profile analysis in ferrous lath martensite

The microstructure and the dislocation density in as-quenched ferrous lath martensite were studied by different methods. The blocks, packets and variants formed due to martensitic transformation were identified and their sizes were determined by electron backscatter diffraction (EBSD). Concomitant transmission electron microscopy (TEM) investigation revealed that the laths contain subgrains with the size between 50 and 100 nm. A novel evaluation procedure of EBSD images was elaborated for the determination of the density and the space distribution of geometrically necessary dislocations from the misorientation distribution. The total dislocation density obtained by X-ray diffraction line profile analysis was in good agreement with the value determined by EBSD, indicating that the majority of dislocations formed due to martensitic transformation during quenching are geometrically necessary dislocations.

36 MATERIALS SCIENCE↗

Biomimetic synthesis of aragonite superstructures using hexamethylenetetramine

In this paper, biomimetic synthesis of aragonite superstructures using a low molecular weight organic-hexamethylenetetramine (HMT) as an additive in the presence of CO{sub 2} supplied by an ammonium carbonate ((NH{sub 4}){sub 2}CO{sub 3}) diffusion method at room temperature was studied. The products were characterized by scanning or transmission electron microscopy, Fourier transform infrared (FT-IR) spectroscopy, X-ray powder diffractometry, and selected area electron diffraction. The results showed the aragonite superstructures especially dumbbell-flower-like ones were obtained. The formation process of calcium carbonate (CaCO{sub 3}) in HMT aqueous solution was investigated, suggesting that the products transformed from calcite to vaterite primarily, and then changed into a mixture of aragonite and calcite with an increase of reaction time. The formation mechanism of CaCO{sub 3} in HMT solution was also discussed, revealing that aragonite might be controlled by HMT molecules and NH{sub 4}{sup +} ions together. - Graphical abstract: The well-defined aragonite hierarchical superstructures are formed using hexamethylenetetramine in aqueous solution. Highlights: > Aragonite superstructures are formed with hexamethylenetetramine at about 25 deg. C. > Dumbbell-flower-like aragonite produces when hexamethylenetetramine/Ca{sup 2+}=10:1. > CaCO{sub 3} formation in hexamethylenetetramine solution violates the Ostwald ripening. > Hexamethylenetetramine and NH{sub 4}{sup +} might control the growth of aragonite together.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Structure and magnetic properties of Ca{sub 2}Fe{sub 1-x}Mn{sub x}AlO{sub 5+{delta}}

Ca{sub 2}Fe{sub 1-x}Mn{sub x}AlO{sub 5} (0{<=}x{<=}1) compounds were prepared by a self-combustion method under air (x=0, 0.1, 0.2 and 0.3) and nitrogen (x=0.5, 0.7 and 1.0). The samples prepared under nitrogen were successfully oxidized after short annealing under air. Both X-ray powder diffraction (XRD) Rietveld analysis and electron diffraction revealed that all compounds adopt the brownmillerite-type structure. All samples present an overall antiferromagnetic behaviour and data from magnetic measurements and Moessbauer spectroscopy allowed to conclude that the transition temperature decreases as Mn content increases for x{<=}0.3 and increases in the case of the x{>=}0.5 compounds. Except for x=1, chemical disorder due to the occupancy of both octahedral and tetrahedral sites by different metals as well as the competition between different moments' orientation induce a complex magnetic behaviour characterized by magnetic frustration and canted antiferromagnetism. Moessbauer spectroscopy and chemical titrations also allowed to conclude about the preferential oxidation of Mn{sup 3+} over Fe{sup 3+}, obtained by thermal treatment under air of the x=0.5 and 0.7 compositions. - Graphical abstract: Structure of the Ca{sub 2}Fe{sub 1-x}Mn{sub x}AlO{sub 5} compound and electron diffraction pattern obtained along the [1-bar 01] zone axis (x=0.2), showing a brownmillerite structure.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Electron backscatter diffraction analysis of gold nanoparticles on Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7−δ}

It has been shown recently that the incorporation of gold nanoparticles into Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7−δ} enhances the superconducting properties of this material in a significant way. Previous XRD and TEM investigations suggest different crystallographic relations of the gold nanoparticles with respect to the epitaxial Y{sub 1}Ba{sub 2}Cu{sub 3}O{sub 7−δ}. Here, detailed investigations of the crystal orientations for a large ensemble of gold nanoparticles with electron backscatter diffraction are reported. The average size of the gold nanoparticles is in the range of 60 nm–80 nm. We identified five different types of heteroepitaxial relationships between the gold nanoparticles and the superconductor film, resulting in complex pole figures. The observed different types of crystallographic orientations are discussed based on good lattice matching and the formation of low energy interfaces.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Comparison of Dislocation Characterization by Electron Channeling Contrast Imaging and Cross-Correlation Electron Backscattered Diffraction

The characterization and quantification of dislocations is predominately carried out using transmission electron microscopy (TEM). Nevertheless, the sample preparation necessary for TEM foils can be cumbersome and possibly introduce defects. Two other techniques for characterizing and quantifying dislocations are electron channeling contrast imaging (ECCI) and cross-correlation electron backscattered diffraction (CC-EBSD). ECCI is similar to TEM in that specific imaging (channeling or diffraction) conditions need to be established, but is carried out in a scanning electron microscope on bulk samples, resulting in less complex sample preparation. CC-EBSD measures subtle changes in orientation measured from EBSD patterns to calculate elastic strains and the Nye tensor to deduce and map the total geometrically necessary dislocation (GND) content. Furthermore, this work presented here compares the capabilities of ECCI and CC-EBSD to map dislocations generated from nanoindentation.

42 ENGINEERING↗

Soft-Chemical Synthesis, Structure Evolution, and Insulator-to-Metal Transition in Pyrochlore-like λ-RhO 2

λ-RhO 2 , a prototype 4d transition metal oxide, has been prepared by the oxidative delithiation of spinel LiRh 2 O 4 using ceric ammonium nitrate. Average-structure studies of this RhO 2 polytype, including synchrotron powder X-ray diffraction and electron diffraction, indicate the room-temperature structure to be tetragonal, in space group I4 1 /amd, with a first-order structural transition to cubic $Fd\bar{3}m$ at T = 345 K on warming. Synchrotron X-ray pair distribution function analysis and 7 Li solid-state nuclear magnetic resonance measurements suggest that the room-temperature structure displays local Rh-Rh bonding. The formation of these local dimers appears to be associated with a metal-to-insulator transition with a nonmagnetic ground state, as also supported by density functional theory-based electronic structure calculations. In conclusion, this contribution demonstrates the power of soft chemistry to kinetically stabilize a simple binary oxide compound.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗

Identifying point defects and ordering in the high-entropy layered oxide Li 1.5 MO 3-δ (M=Mn, Al, Fe, Co, Ni) for energy storage applications

High-entropy layered oxides (HELOs) represent a very promising class of next-generation battery cathodes, combining the well-studied properties of layered cathode materials such as LiCoO 2 with the chemical tunability and stability of high-entropy materials. HELO materials often form particles with complex defects and domain structures, complicating accurate characterization of structure and cation mixing. Understanding disorder and order in HELO materials is necessary for understanding their performance and utility as cathodes. Here we demonstrate the characterization of the HELO Li 1.5 MO 3-δ (M = Mn, Al, Fe, Co, Ni), wherein X-ray powder diffraction, transmission electron microscopy imaging, and electron diffraction patterns are analyzed to reveal the presence of ordering in the HELO, with imaging and diffraction simulation employed to compare experimental results to atomic modeling. Finally, without rigorous characterization at the atomic scale, important features such as defect ordering can be easily overlooked and therefore remain unconsidered when interpreting experimental results.

36 MATERIALS SCIENCE↗

One-pot synthesis of superacid catalytic material SO{sub 4}{sup 2-}/ZrO{sub 2}-SiO{sub 2} with thermostable well-ordered mesoporous structure

A superacid mesostructured catalyst was directly synthesized by adding sulfuric acid to mesoporous zirconia-silica synthesis mixtures, and was characterized by HRTEM, XRD, UV-Vis, nitrogen sorption, NH{sub 3}-TPD, and Pyridine-FTIR. The XRD patterns and electron diffraction micrographs of the calcined samples showed the ordered mesoporous structure and tetragonal crystalline in frameworks. The ammonia TPD, pyridine in situ FTIR, and paraffin isomerization illustrated a new acidic property of the samples. The synthesis of the mesoporous materials, which have stable crystalline frameworks, high surface area, and strong acidity, is very likely to have important technological implications for catalytic reactions of large molecules. - Graphical abstract: TEM images of the calcined mesoporous catalyst MSC{sub x} (x=1.1), in which no aggregated ZrO{sub 2} particles can be observed. The corresponding electron diffraction (insets in figures) indicated the final product was a mesoporous material with a crystalline framework.

36 MATERIALS SCIENCE↗

Investigation into Texture and Structure of MA2-1PCh Magnesium Alloy after Equal Channel Angular Extrusion and Annealing by Quantitative X-Ray Texture Analysis and Electron Backscatter Diffraction

This article discusses application of quantitative X-ray texture analysis (QTXA) based on measurement of direct pole figures and electron backscatter diffraction (EBSD) aimed at study of peculiarities of formation of texture and structure of MA2-1pch magnesium alloy after equal channel angular extrusion (ECAE) and subsequent annealing. Shear bands with the width of 60 μm oriented at 45°–50° to the extrusion direction are revealed, where an inclined scattered basis texture is detected, and outside of these bands, a prismatic texture. As a consequence, basic sliding is activated in the shear bands, which is confirmed by the distribution of Schmid factors. The influence of texture and orientation of shear bands on anisotropy of strength mechanical properties of alloy is discussed.

36 MATERIALS SCIENCE↗

Asymmetric Lattice Disorder Induced at Oxide Interfaces

Control of order-disorder phase transitions is a fundamental materials science challenge, underpinning the development of energy storage technologies such as solid oxide fuel cells and batteries, ultra-high temperature ceramics, and durable nuclear waste forms. At present, the development of promising complex oxides for these applications is hindered by a poor understanding of how interfaces affect lattice disordering processes and defect transport. Here we explore the evolution of local disorder in ion-irradiated La 2 Ti 2 O 7 /SrTiO 3 thin film heterostructures using a combination of high-resolution scanning transmission electron microscopy (STEM), position-averaged convergent beam electron diffraction (PACBED), electron energy loss spectroscopy (STEM-EELS), and ab initio theory calculations. We observe highly non-uniform lattice disordering driven by asymmetric oxygen vacancy formation across the interface. Our calculations indicate that this asymmetry results from differences in the polyhedral connectivity and vacancy formation energies of the two interface components, suggesting ways to manipulate lattice disorder in functional oxide heterostructures.

24 POWER TRANSMISSION AND DISTRIBUTION↗

The Crystal Structure of BaZn 2 Se 2 (OH) 2 Featuring Brownmillerite‐Type Layers

Abstract A bimetallic hydroxychalcogenide, BaZn 2 Se 2 (OH) 2 , was synthesized through hydrothermal pouch methods. The single crystal X‐ray diffraction and electron diffraction indicates that the phase crystallizes in the orthorhombic space group Pnma and is composed of anionic layers [ZnSe 3/3 (OH) 1/1 ] − that are separated and charged balanced by Ba 2+ cations. The [ZnSe 3/3 (OH) 1/1 ] – layer comprises two unique Zn sites, which form interpenetrating zigzag chains with an in‐plane dipole moment and adopts a brownmillerite‐type structural motif. The adjacent layers contain tetrahedrally coordinated Zn chains of opposite handedness related by an inversion center, which cancel the microscopic dipoles to minimize the macroscopic electric polarization. The adoption of a brownmillerite structural motif in BaZn 2 Se 2 (OH) 2 can be rationalized by the distinct charge difference between Se 2− and OH − anions, which creates a sufficient dipole moment in the ZnSe 3 (OH) tetrahedra to allow the occurrence of twisted chains. FTIR spectroscopy confirms the existence of OH − anions and DFT calculations indicate that BaZn 2 Se 2 (OH) 2 is a semiconductor with a direct band gap. This work expands the chemistry of the brownmillerite family from traditional homoanionic oxides to multianion hydroxychalcogenides, offering a new opportunity to explore tunable structural complexity for better design of functional materials.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗