Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Electron Transistor”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Effect of surface pretreatment on interfacial chemical bonding states of atomic layer deposited ZrO{sub 2} on AlGaN

Atomic layer deposition (ALD) of ZrO{sub 2} on native oxide covered (untreated) and buffered oxide etchant (BOE) treated AlGaN surface was analyzed by utilizing x-ray photoelectron spectroscopy (XPS) and high-resolution transmission electron microscopy. Evidenced by Ga–O and Al–O chemical bonds by XPS, parasitic oxidation during deposition is largely enhanced on BOE treated AlGaN surface. Due to the high reactivity of Al atoms, more prominent oxidation of Al atoms is observed, which leads to thicker interfacial layer formed on BOE treated surface. The results suggest that native oxide on AlGaN surface may serve as a protecting layer to inhibit the surface from further parasitic oxidation during ALD. The findings provide important process guidelines for the use of ALD ZrO{sub 2} and its pre-ALD surface treatments for high-k AlGaN/GaN metal–insulator–semiconductor high electron mobility transistors and other related device applications.

36 MATERIALS SCIENCE↗

GaN HEMT Fabrication for Radiation-Hardened Sensing and Communications Electronics

Gallium nitride (GaN), a wide bandgap semiconductor, has vast potential to address two environment conditions associated with the application of electronics to nuclear power: elevated temperatures, and high levels of radiation. A process was developed at The Ohio State University (OSU) to enable fabrication of complex digital and analog electronics circuits for application to nuclear power environments such as locations near or in the reactor core or in spent nuclear fuel casks. Radio frequency (RF)-grade GaN high electron mobility transistor (HEMT) devices were fabricated as part of this process. These were fabricated as depletion mode and enhancement mode devices. They have been electrically characterized and have demonstrated the expected performance. Behavioral models (Verilog-A) were developed from these device measurements to enable electrical simulation of GaN HEMT devices and circuits using common electronics simulation tools based on Simulation Program with Integrated Circuit Emphasis (SPICE). A similar set of GaN HEMT devices is being developed to provide lower speed devices for logic and analog functions. These accomplishments position this technology for effective application to sensor interfacing, signal processing, and data communications in nuclear power plants, including operation in or near the reactor core.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

High current density, low contact resistance wide bandgap contacts

A high current density, low contact resistance contact for wide bandgap (WBG) or ultra-wide bandgap materials (UWBG) is disclosed. The contact is lithographically formed so that a total perimeter length of the contact structure is at least twice the length of the side of a contact pad closest to the gate in a high electron mobility transistor (HEMT). The contact structure may take the form of a plurality of columns having various cross-sectional shapes, or may take the form of a convoluted geometrical shape, such as a comb-like, serpentine, or spiral shape. The depth of the contact structure permits direct contact with the two-dimensional electron gas (2DEG) in the HEMT by the perimeter of the contact structure. The contact structure is formed of at least one metal layer, at least one doped material regrown layer, or at least one implanted region. The contact structure may be applied to other WBG and UWBG devices.

36 MATERIALS SCIENCE↗

Investigation of Single-Event Transients in AlGaN/GaN MIS-Gate HEMTs Using a Focused X-Ray Beam

Focused, pulsed X-rays are implemented to generate single-event transients (SETs) in metal-insulator-semiconductor (MIS)-gate AlGaN/GaN high-electron-mobility transistors (HEMTs) in order to examine the mechanisms responsible for SETs. Unlike Schottky-gate GaN HEMTs, where current flows between gate and drain when the device is biased "OFF," for the MIS-gate HEMTs, current flows between the source and drain. The presence of the SiNx insulating layer under the gate effectively blocks electrons on the gate from moving into the semiconductor. Short-duration SETs at the gate are caused by the collection of holes injected by the X-rays. SETs collected at the source and drain have an initial short-duration component, followed by a long-duration tail that can last for hundreds of nanoseconds. The long tails are due to positive charges (holes) that are less mobile than the electrons and so take longer to exit the HEMT, and to holes that become trapped at defects in the material. The holes lower the potential barrier between the source and the region under the gate, allowing for the injection of electrons that flow from the source to the drain. The durations of the SET tails are determined by the lifetimes of the trapped holes that are discovered to vary with X-ray photon energy and electrical bias.

36 MATERIALS SCIENCE↗

Ultra-low resistance ohmic contacts to GaN with high Si doping concentrations grown by molecular beam epitaxy

Ti/Al/Ni/Au ohmic contacts were formed on heavily doped n{sup +} metal-polar GaN samples with various Si doping concentrations grown by molecular beam epitaxy. The contact resistivity (R{sub C}) and sheet resistance (R{sub sh}) as a function of corresponding GaN free carrier concentration (n) were measured. Very low R{sub C} values (<0.09 {Omega} mm) were obtained, with a minimum R{sub C} of 0.035 {Omega} mm on a sample with a room temperature carrier concentration of {approx}5 Multiplication-Sign 10{sup 19} cm{sup -3}. Based on the systematic study, the role of R{sub C} and R{sub sh} is discussed in the context of regrown n{sup +} GaN ohmic contacts for GaN based high electron mobility transistors.

36 MATERIALS SCIENCE↗

Integrated Cryogenic Satellite Communications Cross-Link Receiver Experiment

An experiment has been devised which will validate, in space, a miniature, high-performance receiver. The receiver blends three complementary technologies; high temperature superconductivity (HTS), pseudomorphic high electron mobility transistor (PHEMT) monolithic microwave integrated circuits (MMIC), and a miniature pulse tube cryogenic cooler. Specifically, an HTS band pass filter, InP MMIC low noise amplifier, HTS-sapphire resonator stabilized local oscillator (LO), and a miniature pulse tube cooler will be integrated into a complete 20 GHz receiver downconverter. This cooled downconverter will be interfaced with customized signal processing electronics and integrated onto the space shuttle's 'HitchHiker' carrier. A pseudorandom data sequence will be transmitted to the receiver, which is in low Earth orbit (LEO), via the Advanced Communication Technology Satellite (ACTS) on a 20 GHz carrier. The modulation format is QPSK and the data rate is 2.048 Mbps. The bit error rate (BER) will be measured in situ. The receiver is also equipped with a radiometer mode so that experiment success is not totally contingent upon the BER measurement. In this mode, the receiver uses the Earth and deep space as a hot and cold calibration source, respectively. The experiment closely simulates an actual cross-link scenario. Since the receiver performance depends on channel conditions, its true characteristics would be masked in a terrestrial measurement by atmospheric absorption and background radiation. Furthermore, the receiver's performance depends on its physical temperature, which is a sensitive function of platform environment, thermal design, and cryocooler performance. This empirical data is important for building confidence in the technology.

Romanofsky, R. R.↗

Identification of photoluminescence bands in AlGaAs/InGaAs/GaAs PHEMT heterostructures with donor-acceptor-doped barriers

The photoluminescence of AlGaAs/InGaAs/GaAs pseudomorphic high-electron mobility transistor heterostructures with donor-acceptor-doped AlGaAs barriers is studied. It is found that the introduction of additional p{sup +}-doped AlGaAs layers into the design brings about the appearance of new bands in the photoluminescence spectra. These bands are identified as resulting from transitions (i) in donor-acceptor pairs in doped AlGaAs layers and (ii) between the conduction subband and acceptor levels in the undoped InGaAs quantum well.

36 MATERIALS SCIENCE↗

Role of nanoscale AlN and InN for the microwave characteristics of AlGaN/(Al,In)N/GaN-based HEMT

A new AlGaN/GaN-based high electron mobility transistor (HEMT) is proposed and its micro-wave characteristics are discussed by introducing a nanoscale AlN or InN layer to study the potential improvement in their high frequency performance. The 2DEG transport mechanism including various sub-band calculations for both (Al,In) N-based HEMTs are also discussed in the paper. Apart from direct current characteristics of the proposed HEMT, various microwave parameters such as transconductance, unit current gain (h{sub 21} = 1) cut-off frequency (f{sub t}), high power-gain frequency (f{sub max}). Masons available/stable gain and masons unilateral gain are also discussed for both devices to understand its suitable deployment in microwave frequency range.

36 MATERIALS SCIENCE↗

Elimination of columnar microstructure in N-face InAlN, lattice-matched to GaN, grown by plasma-assisted molecular beam epitaxy in the N-rich regime

The microstructure of N-face InAlN layers, lattice-matched to GaN, was investigated by scanning transmission electron microscopy and atom probe tomography. These layers were grown by plasma-assisted molecular beam epitaxy (PAMBE) in the N-rich regime. Microstructural analysis shows an absence of the lateral composition modulation that was previously observed in InAlN films grown by PAMBE. A room temperature two-dimensional electron gas (2DEG) mobility of 1100 cm{sup 2}/V s and 2DEG sheet charge density of 1.9 × 10{sup 13} cm{sup −2} was measured for N-face GaN/AlN/GaN/InAlN high-electron-mobility transistors with lattice-matched InAlN back barriers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Three MMIC Amplifiers for the 120-to-200 GHz Frequency Band

Closely following the development reported in the immediately preceding article, three new monolithic microwave integrated circuit (MMIC) amplifiers that would operate in the 120-to-200-GHz frequency band have been designed and are under construction at this writing. The active devices in these amplifiers are InP high-electron-mobility transistors (HEMTs). These amplifiers (see figure) are denoted the LSLNA150, the LSA200, and the LSA185, respectively. Like the amplifiers reported in the immediately preceding article, the LSLNA150 (1) is intended to be a prototype of low-noise amplifiers (LNAs) to be incorporated into spaceborne instruments for sensing cosmic microwave background radiation and (2) has potential for terrestrial use in electronic test equipment, passive millimeter-wave imaging systems, radar receivers, communication receivers, and systems for detecting hidden weapons. The HEMTs in this amplifier were fabricated according to 0.08- m design rules of a commercial product line of InP HEMT MMICs at HRL Laboratories, LLC, with a gate geometry of 2 fingers, each 15 m wide. On the basis of computational simulations, this amplifier is designed to afford at least 15 dB of gain, with a noise figure of no more than about 6 dB, at frequencies from 120 to 160 GHz. The measured results of the amplifier are shown next to the chip photo, with a gain of 16 dB at 150 GHz. Noise figure work is ongoing. The LSA200 and the LSA185 are intended to be prototypes of transmitting power amplifiers for use at frequencies between about 180 and about 200 GHz. These amplifiers have also been fabricated according to rules of the aforesaid commercial product line of InP HEMT MMICs, except that the HEMTs in these amplifiers are characterized by a gate geometry of 4 fingers, each 37 m wide. The measured peak performance of the LSA200 is characterized by a gain of about 1.4 dB at a frequency of 190 GHz; the measured peak performance of the LSA185 is characterized by a gain of about 2.7 dB at a frequency of 181 GHz. The measured gain results of each chip are shown next to their respective photos.

Samoska, Lorene↗

Diamond micro-Raman thermometers for accurate gate temperature measurements

Determining the peak channel temperature in AlGaN/GaN high electron mobility transistors and other devices with high accuracy is an important and challenging issue. A surface-sensitive thermometric technique is demonstrated, utilizing Raman thermography and diamond microparticles to measure the gate temperature. This technique enhances peak channel temperature estimation, especially when it is applied in combination with standard micro-Raman thermography. Its application to other metal-covered areas of devices, such as field plates is demonstrated. Furthermore, this technique can be readily applied to other material/device systems.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Wireless System Development for GaN-Based Transmitters for Advanced Nuclear Reactor Environments

The market for consumer electronics is dominated by Si-based electronics. Many Si-based complementary metal–oxide–semiconductor (CMOS) devices are reaching their limitations in terms of switching frequencies, voltages, currents, and temperatures. Furthermore, these devices are widely known to be susceptible to ionizing radiation and neutrons. Advanced nuclear reactors, especially microreactors and small modular reactors, require wireless electronics that can survive larger neutron and gamma doses than Si CMOS. Because of their size, electronics will need to be placed closer to the reactor cores, and cabling capabilities may be limited. However, GaN high-electron-mobility transistors (HEMTs) have been shown to switch faster with higher gains, and they can achieve current and voltage limits beyond traditional Si CMOS. However, they have less market maturity and have undergone less testing. These GaN HEMTs have been shown to survive ionizing radiation with little effects, but the effects of neutron radiation remain widely unknown. In this report, a wireless electronic system capable of supporting multiple radiation-hardened (rad-hard) sensors is presented. The proposed transmission scheme was designed to be simple to increase the likelihood of success in the immature GaN HEMT process and in high-radiation environments. The transmission system was tested using software-defined radios to emulate the transmission scheme before the transmitter circuitry in the GaN process was developed.

22 GENERAL STUDIES OF NUCLEAR REACTORS↗

Ultrathin Barrier InAlN/GaN Heterostructures for HEMTs

InAlN/AlN/GaN semiconductor heterostructures with a barrier thickness of 5–13 nm have been grown by metalorganic vapor phase epitaxy (MOVPE) on sapphire and SiC substrates. Optimization of GaN buffer and InAlN layers allows fabricating structures with sheet conductivity values below 210 Ohm/sq. High electron mobility transistors (HEMTs) fabricated from such structures show drain current value exceeding 1.25 A/mm with maximum transconductance of 450 mS/mm. Use of thin in situ Si{sub 3}N{sub 4} capping allows to fabricate and compare HEMT and MIS-HEMTs.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

White noise of Nb-based microwave superconducting quantum interference device multiplexers with NbN coplanar resonators for readout of transition edge sensors

White noise of dissipationless microwave radio frequency superconducting quantum interference device (RF-SQUID) multiplexers has been experimentally studied to evaluate their readout performance for transition edge sensor (TES) photon counters ranging from near infrared to gamma ray. The characterization has been carried out at 4 K, first to avoid the low-frequency fluctuations present at around 0.1 K, and second, for a feasibility study of readout operation at 4 K for extended applications. To increase the resonant Q at 4 K and maintain low noise SQUID operation, multiplexer chips consisting of niobium nitride (NbN)-based coplanar-waveguide resonators and niobium (Nb)-based RF-SQUIDs have been developed. This hybrid multiplexer exhibited 1 × 10{sup 4} ≤ Q ≤ 2 × 10{sup 4} and the square root of spectral density of current noise referred to the SQUID input √S{sub I} = 31 pA/√Hz. The former and the latter are factor-of-five and seven improvements from our previous results on Nb-based resonators, respectively. Two-directional readout on the complex plane of the transmission component of scattering matrix S{sub 21} enables us to distinguish the flux noise from noise originating from other sources, such as the cryogenic high electron mobility transistor (HEMT) amplifier. Systematic noise measurements with various microwave readout powers P{sub MR} make it possible to distinguish the contribution of noise sources within the system as follows: (1) The achieved √S{sub I} is dominated by the Nyquist noise from a resistor at 4 K in parallel to the SQUID input coil which is present to prevent microwave leakage to the TES. (2) The next dominant source is either the HEMT-amplifier noise (for small values of P{sub MR}) or the quantization noise due to the resolution of 300-K electronics (for large values of P{sub MR}). By a decrease of these noise levels to a degree that is achievable by current technology, we predict that the microwave RF-SQUID multiplexer can exhibit √S{sub I} ≤ 5 pA/√Hz, i.e., close to √S{sub I} of state-of-the-art DC-SQUID-based multiplexers.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Strong-coupling quantum dot microscope

Here, we report the development and fabrication of a novel cryogenic instrument, a scanning quantum dot microscope (SQDM), capable of positioning a quantum dot to within tunneling range of a sample surface. The microscope is strong-coupling in the sense that electron wavefunctions in the quantum dot can directly overlap with electron wavefunctions in the sample, in contrast to probes based on electric-field coupling. The SQDM consists of a sharp glass probe with two asymmetric electrodes leading to an aluminum quantum dot at the apex. One electrode is capacitively coupled to the quantum dot, while the other lead is connected to the dot via a tunneling junction. A charge sensing circuit constructed from a high-electron-mobility transistor is attached to the capacitance lead to measure the charge state of the dot. The last key feature of the design is a tilted-apex geometry. This design feature, in conjunction with the capacitive sensing scheme, results in a robust quantum-dot probe capable of operating within angstrom distances of the sample surface while protecting the single tunnel junction responsible for electron transport onto the quantum dot. We demonstrate that our instrument can detect single-electron tunneling events and can also be operated as a standard scanning tunneling microscope capable of nanometer-scale resolution of the surface topography.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗

Two-dimensional electron and hole gases in In{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N/GaN heterostructure for enhancement mode operation

In this paper, a numerical study of In{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N/GaN heterostructure is presented. The dependence of two-dimensional electron gas (2DEG) and two-dimensional hole gas (2DHG) sheet densities on variables, such as In{sub x}Ga{sub 1−x}N layer thickness and In content, and Al{sub y}Ga{sub 1−y}N barrier layer thickness and Al content, are systematically investigated. The effect of P-type doping in In{sub x}Ga{sub 1−x}N on 2DEG and 2DHG sheet densities in this heterostructure is also studied. It is shown that the strong reverse electric field in In{sub x}Ga{sub 1−x}N cap layer contributes to the depletion of 2DEG at the Al{sub y}Ga{sub 1-y}N/GaN interface. When In{sub x}Ga{sub 1−x}N layer thickness and In content increases, 2DEG sheet density decreases significantly. P-type doping shows less influence on 2DEG compared to the polarization electric field in In{sub x}Ga{sub 1−x}N layer. In addition, there exist critical values for all the variables beyond which 2DHG appears at the interface of In{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N. Once 2DHG appears, it will prevent 2DEG from being further depleted. With proper design of Al{sub y}Ga{sub 1−y}N layer, the coexistence of 2DEG and 2DHG in In{sub x}Ga{sub 1−x}N/Al{sub y}Ga{sub 1−y}N/GaN structure can be avoided, showing that this structure has great potential in the fabrication of enhancement mode (E-mode) high electron mobility transistors.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Effects of high-temperature AIN buffer on the microstructure of AlGaN/GaN HEMTs

Effects on AlGaN/GaN high-electron-mobility transistor structure of a high-temperature AlN buffer on sapphire substrate have been studied by high-resolution x-ray diffraction and atomic force microscopy techniques. The buffer improves the microstructural quality of GaN epilayer and reduces approximately one order of magnitude the edge-type threading dislocation density. As expected, the buffer also leads an atomically flat surface with a low root-mean-square of 0.25 nm and a step termination density in the range of 10{sup 8} cm{sup -2}. Due to the high-temperature buffer layer, no change on the strain character of the GaN and AlGaN epitaxial layers has been observed. Both epilayers exhibit compressive strain in parallel to the growth direction and tensile strain in perpendicular to the growth direction. However, an high-temperature AlN buffer layer on sapphire substrate in the HEMT structure reduces the tensile stress in the AlGaN layer.

36 MATERIALS SCIENCE↗

Investigation of DC and RF Performance of Novel MOSHEMT on Silicon Substrate for Future Submillimetre Wave Applications

In this work, the DC and RF performance of a 20 nm gate length novel metal oxide semiconductor high electron mobility transistor (MOSHEMT) on Silicon substrate is studied using Sentaurus TCAD tool. The proposed MOSHEMT device features a novel T-gate structure, heavily doped In{sub 0.52}Ga{sub 0.48}As source/drain regions, delta doped planes on both sides of the In{sub 0.75}Ga{sub 0.25}As/InAs/In{sub 0.75}Ga{sub 0.25}As composite channel, a multi layer cap and a very thin layer of HfO{sub 2} as gate dielectric. The TCAD simulation results obtained at room temperature using hydrodynamic carrier transport model indicates that the 20 nm gate length proposed MOSHEMT device is capable of providing a peak drain current of 2450 mA/mm at V{sub DS} = 0.6 V and the peak transconductance obtained for the proposed device is 2900 mS/mm. The f{sub T} and f{sub max} obtained for the L{sub g} = 20 nm proposed MOSHEMT on Silicon substrate are 372 and 480 GHz respectively. At 300 K, the measured Hall mobility of the electrons in the quantum well channel is 9600 cm{sup 2}/(V s). The on state resistance (R{sub ON}) obtained for the L{sub g} = 20 nm proposed device is 116 Ohm μm. These devices are undoubtedly, the most suitable candidates for future sub millimetre wave applications.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗