Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Effectiveness evaluation”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS2006

Capillary Limit of a Miniature Loop Heat Pipe with Multiple Evaporators and Multiple Condensers

An experimental investigation of a miniature loop heat pipe with multiple evaporators and multiple condensers were conducted in order to evaluate its capillary limit. The experimental tests were conducted by varying heat load to one or both evaporators, with and without active temperature control of compensation chamber (CC) using the thermoelectric devices, and variable tilts between the evaporators and the CCs. The physical process of the loop and thermal conductance of the heat leak from evaporator to (CC) were discussed based on the test results. The difference of the temperature profiles between with and without active control of CC temperature was evaluated. The effect of the gravity on capillary limit and CC temperature was also evaluated by comparing the test result in horizontal position with that in vertical position. The loop recovery after capillary limit was exceeded was also described.

Ku, Jentung↗
NASA NTRS2012

Effect of Uncertainty on Deterministic Runway Scheduling

Active runway scheduling involves scheduling departures for takeoffs and arrivals for runway crossing subject to numerous constraints. This paper evaluates the effect of uncertainty on a deterministic runway scheduler. The evaluation is done against a first-come- first-serve scheme. In particular, the sequence from a deterministic scheduler is frozen and the times adjusted to satisfy all separation criteria; this approach is tested against FCFS. The comparison is done for both system performance (throughput and system delay) and predictability, and varying levels of congestion are considered. The modeling of uncertainty is done in two ways: as equal uncertainty in availability at the runway as for all aircraft, and as increasing uncertainty for later aircraft. Results indicate that the deterministic approach consistently performs better than first-come-first-serve in both system performance and predictability.

Gupta, Gautam↗
NASA NTRS2000

Introduction to the SONEX (Subsonic Assessment Ozone and Nitrogen Oxides Experiment) and POLINAT-2 (Pollution from Aircraft Emissions in the North Atlantic Flight Corridor) Special Issue

Emissions of atmospheric species from the engines of subsonic aircraft at cruise altitude (roughly, above seven kilometers) are of concern to scientists, the aviation industry and policymakers for two reasons. First, water vapor, soot and sulfur oxides, and related heterogeneous processes, may modify clouds and aerosols enough to perturb radiative forcing in the UT/LS (upper troposphere/lower stratosphere). A discussion of these phenomena appears in Chapter 3 of the IPCC Aviation Assessment (1999). An airborne campaign conducted to evaluate aviation effects on contrail, cirrus and cloud formation, is described in Geophysical Research Letters. The second concern arises from subsonic aircraft emissions of nitrogen oxides (NO + NO2 = NO(sub x)), CO, and hydrocarbons. These species may add to the background mixture of photochemically reactive species that form ozone. In the UT/LS, ozone is a highly effective greenhouse gas. The impacts of subsonic aircraft emissions on tropospheric NO(sub x) and ozone budgets have been studied with models that focus on UT chemistry [e.g. see discussions of individual models in Brasseur et al., 1998; Friedl et al., 1997; IPCC, 1999]. Depending on the model used, projected increases in the global subsonic aircraft fleet from 1992 to 2015 will lead to a 50-100 pptv increase in UT/LS NO. at 12 km (compared to 50-150 pptv background) in northern hemisphere midlatitudes. The corresponding 12-km ozone increase is 7-11 ppbv, or 5-10% (Chapter 4 in IPCC, 1999). Two major sources of uncertainties in model estimates of aviation effects are: (1) the often limited degree to which global models - the scale required to evaluate aircraft emissions - realistically simulate atmospheric transport and other physical processes; (2) limited UT/LS observations of trace gases with which to evaluate model performance. In response to the latter deficiency, a number of airborne campaigns aimed at elucidating the effect of aircraft on atmospheric nitrogen oxides and ozone were performed between 1990 and 1996 (see descriptions in Friedl et al., 1997; Brasseur et al., 1998).

Thompson, Anne M.↗
NASA NTRS1975

Effects of automobile steering characteristics on driver/vehicle system performance in discrete maneuvers

A series of discrete maneuver tasks were used to evaluate the effects of steering gain and directional mode dynamic parameters on driver/vehicle responses. The importance and ranking of these parameters were evaluated through changes in subjective driver ratings and performance measures obtained from transient maneuvers such as a double lane change, an emergency lane change, and an unexpected obstacle. The unexpected obstacle maneuver proved more sensitive to individual driver differences than to vehicle differences. Results were based on full scale tests with an experienced test driver evaluating many different dynamic configurations plus seventeen ordinary drivers evaluating six key configurations.

Klein, R. H.↗
NASA NTRS1974

Research study on high energy radiation effect and environment solar cell degradation methods

The most detailed and comprehensively verified analytical model was used to evaluate the effects of simplifying assumptions on the accuracy of predictions made by the external damage coefficient method. It was found that the most serious discrepancies were present in heavily damaged cells, particularly proton damaged cells, in which a gradient in damage across the cell existed. In general, it was found that the current damage coefficient method tends to underestimate damage at high fluences. An exception to this rule was thick cover-slipped cells experiencing heavy degradation due to omnidirectional electrons. In such cases, the damage coefficient method overestimates the damage. Comparisons of degradation predictions made by the two methods and measured flight data confirmed the above findings.

Horne, W. E.↗
NASA NTRS1982

Effect of electron flux on radiation damage in GaAs solar cells

The objective of this work was to evaluate the effect of electron flux and temperature on radiation damage in GaAs solar cells. The defect levels and the power ratio of the GaAs solar cells under various irradiation conditions are compared. In a 200 C continuous annealing experiment, the GaAs solar cells which were irradiated at a flux of 2 x 10 to the 9th e/sq cm s suffered less power degradation than the cells which were irradiated at the same temperature at a higher flux of 4 x 10 to the 10th e/sq cm s. After the continuous annealing experiment, a single-step post annealing at 200 C was performed for 40 hr on these irradiated cells. An additional improvement in power recovery was observed only on those cells irradiated at the high flux of 4 x 10 to the 10th e/sq cm s. DLTS data indicate that the defect density decreases with lower electron flux. Both of these observations strongly suggest that the continuous annealing in GaAs cells can be effective at temperatures as low as 150 C, or even less in a space environment such as geosynchronous orbit.

Loo, R. Y.↗
NASA NTRS1985

The effect of slots on the buckling and postbuckling behavior of laminated plates

An experimental study was conducted to evaluate the effect of lateral slots on the buckling response, the postbuckling response, and the failure characteristics of flat rectangular graphite-epoxy plates loaded in compression. The slots did not significantly affect the prebuckling and buckling behavior of the plates. The slots caused local changes in the strain distribution and out-of-plane deformations near the slot. Failure loads and modes were strongly affected by slot location. Centrally located slots did not affect the failure loads or failure modes of the plates. Slots located close to an unloaded edge of a plate reduced the postbuckling strength of the plate and affected the failure mode. For one slightly offset slot location, interaction of out-of-plane deformations with the slot tip was observed to affect the failure mode significantly without affecting the failure load.

Gurdal, Z.↗
NASA NTRS1986

Effect of solution concentration and aging conditions on PMR-15 resin

High performance liquid chromatography is utilized to evaluate the effect of temperature, solution concentration, and aging time on PMR-15 resin solutions. Fifty- and 70-wt percent PMR-15 resin solutions were prepared from the mixture of 5-norbornene-2,3-dicarboxylic ester (NE) acid, 4.4'-methylenedianiline (MDA), methanol, and 3,3',4.4.-benzophenonetetracarboxylic dimethyl ester (BTDE) acid solution. It is observed that in PMR-15 resin solution aged for 35 days at room temperature NE and MDA react to form amide and imide intermediates. The precipitation data reveal that in the 70-wt percent solution precipitation occurs after 12 days and in the 50-wt percent solution after 20 days; however, at lower temperatures (-11 C, and 2 C) no precipitation is detected. It is concluded that storage of resin solutions and powders at reduced temperatures extends shelf life by reducing the rate of imide formation.

Roberts, G. D.↗
NASA NTRS1986

The effects of syntactic complexity on the human-computer interaction

Three divided-attention experiments were performed to evaluate the effectiveness of a syntactic analysis of the primary task of editing flight route-way-point information. For all editing conditions, a formal syntactic expression was developed for the operator's interaction with the computer. In terms of the syntactic expression, four measures of syntactic were examined. Increased syntactic complexity did increase the time to train operators, but once the operators were trained, syntactic complexity did not influence the divided-attention performance. However, the number of memory retrievals required of the operator significantly accounted for the variation in the accuracy, workload, and task completion time found on the different editing tasks under attention-sharing conditions.

Chechile, R. A.↗
NASA NTRS1992

Void effects on the interlaminar shear strength of unidirectional graphite-fiber-reinforced composites

A study was conducted to evaluate the effect of voids on the interlaminar shear strength (ILSS) of a polyimide matrix composite system. The graphite/PMR-15 composite was chosen for study because of the extensive amount of experience that has been amassed in the processing of this material. Void contents were calculated and the void geometry and distribution were noted using microscope techniques such as those used in metallography. A good empirical correlation between ILSS and composite density was found. The most acceptable relationship between the ILSS and density was found to be a power equation that closely resembles theoretically derived expressions. It was found that void-free composites could be processed in matched metal die molds at pressures greater than 1.4 MPa and less than 6.9 MPa.

Bowles, Kenneth J.↗
NASA NTRS2003

Thermal Exposure Effects on Properties of Al-Li Alloy Plate Products

The objective of this viewgraph representation is to evaluate the effects of thermal exposure on the mechanical properties of both production mature and developmental Al-Li alloys. The researchers find for these alloys, the data clearly shows that there is no deficit in mechanical properties at lower exposure temperatures in some cases, and a signficant deficit in mechanical properties at higher exposure temperatures in all cases. Topics considered include: Al-Li alloys composition, key characteristics of Al-Li alloys and thermal exposure matrix.

Shah, Sandeep↗
NASA NTRS1992

Lack of deleterious effect of slow-release sodium fluoride treatment on cortical bone histology and quality in osteoporotic patients

We evaluated the effects of intermittent slow-release sodium fluoride (SRNaF) and continuous calcium citrate therapy on cortical bone histology, reflection ultrasound velocity (material strength) and back-scattered electron image analysis (BEI) in 26 osteoporotic patients before and following therapy. All measurements were made on transiliac crest bone biopsies obtained before and following 2 years of therapy in each patient. For all 26 patients there were no significant changes in cortical bone histomorphometric parameters. In 15 patients in whom bone material quality was assessed by reflection ultrasound, there was no change in velocity (4000 +/- 227 SD to 4013 +/- 240 m/s). BEI disclosed no mineralization defects or the presence of woven bone. Mean atomic number (density) of bone increased slightly, but significantly (9.261 +/- 0.311 to 9.457 +/- 0.223, P = 0.031). While these changes are less marked than those observed for cancellous bone, they indicate that this form of therapy does not adversely affect cortical bone remodelling.

NASA Discipline Regulatory Physiology↗
NASA NTRS1990

Evaluation of RSRM case hardware fretting concerns

Fretting corrosion was first noted on Shuttle flight STS-26. This flight was the first usage of the Redesigned Solid Rocket Motor (RSRM). The occurrence of fretting has since been observed on both the field and factory joints of the RSRM. Fretting is a form of corrosion that occurs at the interface between contacting, highly loaded, metal surfaces when exposed to slight relative vibratory motions. The engineering effort performed to evaluate the effect of fretting on the RSRM case hardware is summarized. Based on the results of this evaluation, several conclusions were made concerning flight safety. Also, recommendations were made concerning trending the effects of multiple generations of fretting damage.

Swauger, Thomas R.↗
NASA NTRS1972

Environmental microbiology as related to planetary quarantine

The experimental design of a study to evaluate the effect of different cleaning methods and storage conditions on the dry heat resistance of Bacillus subtilis var. niger spores is described and the results for the first evaluation are reported. Specifically, the synergistic effect which occurs when spores are subjected simultaneously to dry heat and gamma radiation so as to be able to specify thermoradiation sterilization cycles was investigated. Attempts were made to understand the underlying mechanism(s) that lead to spore death from this combination of stresses. Data cover: (1) the survival of spores on surfaces at various temperatures in a precisely controlled environmental system, (2) the rate of destruction of these spores at ambient temperature when subjected to gamma radiation, and (3) the rate of destruction of spores when they are subjected to combined gamma radiation and thermal stresses.

Pflug, I. J.↗
NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. This is the final report of our project to summarize the findings of the effect of space radiation exposure on plant seeds from morphometrics, nutritional values, to molecular machenisms. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. Underlying mechanisms were furtherly evaluated using transcriptomic analysis. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J T Richards↗
NASA NTRSDate not supplied

Impact of Space Radiation on Plant Seeds: from Arabidopsis thaliana to Crops

One of the major concerns for long-term exploration missions beyond the Earth’s magnetosphere is radiation risk, primarily from solar particle events (SPE) and galactic cosmic rays (GCR). With the goal of manned Mars exploration, the production of fresh food during long-duration space missions provides critical nutritional supplementation and may also benefit astronauts’ behavioral health. However, the effects of space radiation on plants and plant propagules have not been sufficiently investigated and characterized. This is the final report of our project to summarize the findings of the effect of space radiation exposure on plant seeds from morphometrics, nutritiaonal values, to molecular machenisms. In this study, we evaluated the effect of simulated GCR (using dry seeds) or SPE (using hydrated seeds) on seeds of Arabidopsis, Mizuna mustard, ‘Outredgeous’ red romaine lettuce, and ‘Red Robin’ dwarf tomato. Seeds were exposed to various doses of simulated space radiation scenarios, either acutely or at a low dose rate (LDR), using the NASA Space Radiation Laboratory (NSRL) facility at Brookhaven National Lab (BNL). Exposure to simulated GCR or SPE at the levels tested had no significant impact on the germination rate in Arabidopsis and crop seeds; however, GCR reduced the viability of lettuce and tomato seeds. Overall, the morphological changes of the seedlings cultured from irradiated seeds were dose- and ion quality- dependent, with heavier ions causing more severe damage. These changes ranged from cotyledon deformation, shortened root length, smaller seedling size, and other signs of stress, depending on the seed types. Both 40 and 80 cGy (LDR) exposures of GCR or SPE significantly affected tomato early seedling development, delayed tomato fruiting, and reduced the total yield of tomato. Altered nutritional values were also found in edible biomass, especially for the GCR 80 cGy (LDR) groups. Underlying mechanisms were furtherly evaluated using transcriptomic analysis. For both GCR and SPE, 40 cGy showed some effects, but to a much lesser extent compared with 80 cGy, which can be considered as the “maximum permissible exposure” for the seed types we evaluated in this study. The impact of space radiation on seeds potentially affects the ability of plants to adapt to other environmental stresses (e.g. microgravity, water stress, and hardware constraints) as well as susceptibility to plant diseases, which need to be furtherly investigated. This research is funded by NASA’s Human Research Program.

J.T. Richards↗
NASA NTRS2002

Control of Inflow Distortion in a Scarf Inlet

The scarf inlet has the potential to reduce aircraft inlet noise radiation to the ground by reflecting it into the space above the engine. Without forward motion of the engine, the non-symmetry of the inlet causes inflow distortion which generates noise that is greater than the noise reduction of the scarf. However, acoustic evaluations of aircraft engines are often done on static test stands. A method to reduce inflow distortion by boundary layer suction is proposed and evaluated using a model of a high bypass ratio engine located in an anechoic chamber. The design goal of the flow control system is to make the inflow to the inlet circumferentially uniform and to eliminate reversed flow. This minimizes the inflow distortion and allows for acoustic evaluation of the scarf inlet on a static test stand. The inlet boundary layer suction effectiveness is evaluated both by aerodynamic and by acoustic measurements. Although the design goal is not met, the control system is found to have a beneficial effect on the engine operation, reducing blade stall and speed variation. This is quantified by two acoustic benefits, reduction both of the variability of tone noise and of the low frequency wideband noise due to the inflow distortion. It is felt that a compromise in the manufacture of the control hardware contributes to the inability of the control system to perform as expected from the analysis. The control system with sufficient authority is felt to have the potential to permit reliable acoustic testing in a static configuration of engines with non-symmetric inlets. Because the control system can improve operation of the engine, it may also have the potential to reduce noise and vibration and enhance engine longevity during low speed ground operations in the terminal area.

Gerhold, Carl H.↗