Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “EROSION”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Initial stages of cavitation damage and erosion on copper and brass tested in a rotating disk device

In view of the differences in flow and experimental conditions, there has been a continuing debate as to whether or not the ultrasonic method of producing cavitation damage is similar to the damage occurring in cavitating flow systems, namely, venturi and rotating disk devices. In this paper, the progress of cavitation damage during incubation periods on polycrystalline copper and brass tested in a rotating disk device is presented. The results indicate several similarities and differences in the damage mechanism encountered in a rotating disk device (which simulates field rotary devices) and a magnetostriction apparatus. The macroscopic erosion appears similar to that in the vibratory device except for nonuniform erosion and apparent plastic flow during the initial damage phase.

Rao, P. V.↗

Cavitation pitting and erosion of Al 6061-T6 in mineral oil and water

The authors are currently carrying out a study of the cavitation erosion of different bearing metals and alloys in mineral oils were studied. The variations of weight loss, the pit diameter and depth due to cavitation erosion on Al 6061-T6 in mineral oil and water are presented.

Rao, B. C. S.↗

Cavitation Erosion of Copper, Brass, Aluminum and Titanium Alloys in Mineral Oil

The variations of the mean depth of penetration, the mean depth rate of penetration, MDRP, the pit diameter 2a and depth h due to cavitation attack on Al 6061-T6, Cu, brass of composition Cu-35Zn-3Pb and Ti-5A1-2.5Sn are presented. The experiments are conducted in a mineral oil of viscosity 110 CS using a magnetostrictive oscillator of 20 kHz frequency. Based on MDRP on the materials, it is found that Ti-5Al-2.5Sn exhibits cavitation erosion resistance which is two orders of magnitude higher than the other three materials. The values of h/a are the largest for copper and decreased with brass, titanium, and aluminum. Scanning electron microscope studies show that extensive slip and cross slip occurred on the surface prior to pitting and erosion. Twinning is also observed on copper and brass.

Rao, B. C. S.↗

Remote Sensing techniques used to characterize soil erosion in southwestern Sao Paulo state

Within randomly sampled squares of a 1 km x 1 km grid, rill/gullies frequency, land cover/land use type and shape of the slopes were extracted from aerial photographs of the Ribeirao Anhumas drainage basin. Mean slope gradient, stream frequency and slope length were calculated on topographic maps. Ground truth data on fine sand/coarse sand ratio and vegetation cover densities were obtained. The MSS-LANDSAT-2 data (CCTs) were analyzed using single-cell, cluster synthesis and slicer algorithms. Graphical and statistical analyses of the data indicate that different slope gradients and land cover/land use types are the most significant factors related to the soil erosion process. The digital analysis of MSS data allowed the association among gray level classes and vegetation cover classes, which defined seven classes. These gray level classes and slope gradient classes were used to rank erosion risk.

Parada, N. D. J.↗

Cavitation pitting and erosion of aluminum 6061-T6 in mineral oil water

Cavitation erosion studies of aluminum 6061-T6 in mineral oil and in ordinary tap water are presented. The maximum erosion rate (MDPR, or mean depth of penetration rate) in mineral oil was about four times that in water. The MDPR in mineral oil decreased continuously with time, but the MDPR in water remained approximately constant. The cavitation pits in mineral oil were of smaller diameter and depth than the pits in water. Treating the pits as spherical segments, we computed the radius r of the sphere. The logarithm of h/a, where h is the pit depth and 2a is the top width of the pit, was linear when plotted against the logarithm of 2r/h - 1.

Rao, B. C. S.↗

Wind Erosion and Dune Formation on High Frozen Bluffs

Frost penetration increases upslope on barren, windswept bluffs in cold environments. Along the south shore of Lake Superior, near the brow of 100 m high bluffs it typically exceeds 5 m. Frost increases the shear strength of damp sand to a level comparable to that of concrete, making winter slopes highly stable despite undercutting by waves and ground-water sapping along the footslope. Sublimation of interparticle ice in the slope face increases with wind speed and lower vapor pressures. The cold and dry winter winds of Lake Superior ablate these slopes through loss of binding ice. Wind erosion rates, based on measurements of sand accumulation on the forest floor downwind of the brow, show most airborne sand falls out within several meters of the brow, forming a berm 1 to 3 m high after many years. The spatial pattern of sand deposition, however, varies considerably over distances of several hundred meters along the top bluffs in response to frost conditions and the build-up of gravel lag on the slope face, sand exposure from mass movements, and local aerodynamics of the crest slope. The formation of perched sand dunes in the Great Lakes region is clearly related to wind erosion of sand from high bluffs in winter. Broadly similar processes may operate on Mars.

Marsh, W. M.↗

A study of the effect of solid particle impact and particle shape on the erosion morphology of ductile metals

Impulsive versus steady jet impingement of spherical glass bead particles on metal surfaces was studied using a gas gun facility and a commercial sand blasting apparatus. Crushed glass particles were also used in the sand blasting apparatus as well as glass beads. Comparisons of the different types of erosion patterns were made. Scanning electron microscopy, surface profilometry and energy dispersive X-ray spectroscopy analysis were used to characterize erosion patterns. The nature of the wear can be divided into cutting and deformation, each with its own characteristic features. Surface chemistry analysis indicates the possiblity of complex chemical and/or mechanical interactions between erodants and target materials.

Rao, P. V.↗

Solar wind and cosmic ray irradiation of grains and ices - application to erosion and synthesis of organic compounds in the solar system

Solar wind and cosmic and cosmic ray irradiation of grains induces physical and chemical effects including their erosion and the synthesis of molecular compounds within the implanted layers. The experiments performed with H2O ice implanted by keV ions are presented. The ion implantation is intended to simulate the irradiation of comets, ring grains, and satellites of outer planets, either by the primitive solar particles or by contemporary solar wind (SW) or solar cosmic rays (SCR) fluxes. The detection of molecules was obtained through in-situ infrared spectroscopy. A model is proposed for the formation of organic matter within icy solar system bodies which is in agreement with experimental results of erosion rates. The organic molecules, frozen-in within the icy mantles of the grains present in the protosolar nebula, would originate from their primitive irradiation. Such an irradiation would have taken place during an early stage of the proto-sun, when both the SW and SCR particles were more intense by orders of magnitude.

Rocard, F.↗

Deformation and erosion of f.c.c. metals and alloys under cavitation attack

Experimental investigations have been conducted to determine the early stages of cavitation attack on 6061-T6 aluminum alloy, electrolytic tough pitch copper, brass, and bronze, all having polycrystalline fcc matrices. The surface profiles and scanning electron micrographs show that the pits are initially formed at the grain boundaries, while the grain surfaces are progressively roughened by multiple slip and twinning. The initial erosion is noted to have occurred from the material in the grain boundaries, as well as by fragmentation of part of the grains. Further erosion occurred by shearing and necking of the surface undulations caused by plastic deformation. The mean penetration depth, computed on the basis of mass loss, was lowest on the bronze and greatest on the copper. Attention is given to the relation of cavitation attack to grain size, glide stress and stacking fault energy.

Rao, B. C. S.↗

A unified relation for cavitation erosion

A power-law relationship between the average erosion rate and cumulative erosion is presented. Data analyses from Venturi, magnetostriction, and liquid-impingement devices conform to this unified relation. A normalization technique is also suggested for prediction purposes.

Veerabhadra Rao, P.↗

Particle erosion mechanisms and mass redistribution in Saturn's rings

A variety of physical processes can erode the surfaces of planetary ring particles. According to current estimates, the most efficient of these over the bulk of Saturn's rings is hypervelocity impact by 100 microns to one centimeter radius meteoroids. The atoms, molecules, and fragments ejected from ring particles by erosion arc across the rings along elliptical orbits to produce a tenuous halo of solid ejecta and an extensive gaseous atmosphere. Continuous exchange of ejecta between different ring regions can lead to net radial transport of mass and angular momentum. The equations governing this ballistic transport process are presented and discussed. Both numerical and analytic studies of idealized ring systems illustrate that ballistic transport can cause significant mass redistribution in the rings, especially near regions of high density contrast, such as the inner edges of the A and B rings. Ejecta exchanges can also alter local particle sizes and compositions and may produce pulverized regoliths at least several centimeters deep. The meteoroid erosion rate is so high that significant global torques and mass loss are possible on times shorter than a solar system life time.

Durisen, R. H.↗

Transport effects due to particle erosion mechanisms

Various processes can erode the surfaces of planetary ring particles. Recent estimates for Saturn's rings suggest that a centimeter-thick surface layer could be eroded from an isolated ring particle in less than 1000 yr by meteoroid impacts alone. The atoms, molecules, and chips ejected from ring particles by erosion will arc across the rings along elliptical orbits. For moderate ring optical depths, ejecta will be absorbed or inelastically scattered upon reintersecting the ring plane. Continuous exchange of ejecta between different ring regions can lead to net radial transport of mass and angular momentum, to changes in particle sizes, and to the buildup of chip regoliths several centimeters deep on the surfaces of ring particles. Because most of the erosional ejecta are not lost but merely exchanged over short distances, the net erosion rate of the surfaces of these ring particles will be much less than that estimated for an isolated particle. Numerical solutions for time-dependent ballistic transport under various assumptions suggest pile-up and spillover effects especially near regions of preexisting high optical depth contrast, such as the inner edges of A and B rings. Global redistribution could be significant over billions of years. Other features in planetary ring systems may be influenced by ballistic transport.

Durisen, R. H.↗

Remote sensing techniques for the detection of soil erosion and the identification of soil conservation practices

The following paper is a summary of a number of techniques initiated under the AgRISTARS (Agriculture and Resources Inventory Surveys Through Aerospace Remote Sensing) project for the detection of soil degradation caused by water erosion and the identification of soil conservation practices for resource inventories. Discussed are methods to utilize a geographic information system to determine potential soil erosion through a USLE (Universal Soil Loss Equation) model; application of the Kauth-Thomas Transform to detect present erosional status; and the identification of conservation practices through visual interpretation and a variety of enhancement procedures applied to digital remotely sensed data.

Pelletier, R. E.↗

Groundbased studies of spacecraft glow and erosion caused by impact of oxygen and nitrogen beams

To simulate surface reactions in the space environment a ground-based facility was developed that produces a very high flux 10(14) to 10(16)/sq cm/s of low energy (2 to 20 eV) neutral atoms and molecules. The neutral beams are created using a method involving neutralization and reflection of ions from a biased limiter, where the ions are extracted from a toroidal plasma source. The spectra of emission due to beam-solid interactions on targets of Chemglaze Z-306 optical paint and Kapton are presented. Erosion yields for carbon and Kapton targets with low energy (approx. 10 eV) nitrogen and oxygen beams were measured. The reaction rates and surface morphology for the erosion of Kapton are similar to those measured in experiments on STS-5.

Langer, W. D.↗

Erosion-Resistant Water-Blast Nozzle

Design of nozzle reduces erosion of orifice by turbulent high-pressure water flowing through it. Improved performance and resistance to erosion achieved by giving interior nozzle surface long, gradual convergence before exit orifice abrupt divergence after orifice and by machining surface to smooth finish.

Roberts, Marion L.↗

Internal erosion rates of a 10-kW xenon ion thruster

A 30 cm diameter divergent magnetic field ion thruster, developed for mercury operation at 2.7 kW, was modified and operated with xenon propellant at a power level of 10 kW for 567 h to evaluate thruster performance and lifetime. The major differences between this thruster and its baseline configuration were elimination of the three mercury vaporizers, use of a main discharge cathode with a larger orifice, reduction in discharge baffle diameter, and use of an ion accelerating system with larger acceleration grid holes. Grid thickness measurement uncertainties, combined with estimates of the effects of reactive residual facility background gases gave a minimum screen grid lifetime of 7000 h. Discharge cathode orifice erosion rates were measured with three different cathodes with different initial orifice diameters. Three potential problems were identified during the wear test: the upstream side of the discharge baffle eroded at an unacceptable rate; two of the main cathode tubes experienced oxidation, deformation, and failure; and the accelerator grid impingement current was more than an order of magnitude higher than that of the baseline mercury thruster. The charge exchange ion erosion was not quantified in this test. There were no measurable changes in the accelerator grid thickness or the accelerator grid hole diameters.

Rawlin, Vincent K.↗

The scaling of the threshold conditions for solid propellant erosive burning

The effects of the parameters that are considered to influence most strongly the scaling to larger rocket motor sizes of the transition or threshold conditions for erosive burning rate augmentation are measured and a scaling criterion for the threshold conditions for erosive burning is developed. The results are presented for a series of motor firings that were performed to measure the transition length threshold conditions (axial position at which deviation from nonerosive burning rate begins) while attempting to systematically vary the parameters that are considered to control the phenomena. The results of attempts to correlate the threshold conditions with several flow parameters are presented.

Strand, L. D.↗

ISM-induced erosion and gas-dynamical drag in the Oort Cloud

The model presently used to examine the physical interactions between the ISM and the Oort Cloud can account for sputtering, sticking, and grain-impact erosion, as well as gas drag, by envisioning the ISM as a multiphase medium with distinct atomic and molecular cloud-phase regimes and coronal and warm/ambient gas-phase regimes. Erosion, which reduces the effectiveness of the thermal and radiation-damage processes acting on cometary surfaces in the Oort cloud, is found to be the dominant ISM interaction; ISM drag effects were found to efficiently remove submicron particles from the Cloud.

Stern, S. Alan↗