Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “ELASTIC PROPERTY”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

Tensile and flexural strength of nongraphitic superhybrid composites - Predictions and comparisons

Equations are presented and described which can be used to predict bounds on the tensile and flexural strengths of nongraphitic superhybrid (NGSH) composites. These equations are derived by taking into account the measured stress-strain behavior, the lamination residual stresses and the sequence of events leading to fracture. The required input for using these equations includes constituent composites, elastic and strength properties, NGSH elastic properties, cure temperature, and ply stress influence coefficients. Results predicted by these equations are in reasonably good agreement with measured data for strength and for the apparent 'knees' in the nonlinear stress-strain curve. The lower bound values are conservative compared to measured data. These equations are relatively simple and should be suitable for use in the preliminary design and initial sizing of structural components made from NGSH composites.

Chamis, C. C.↗

Multiscale Modeling of Carbon/Phenolic Composite Thermal Protection Materials: Atomistic to Effective Properties

Next generation ablative thermal protection systems are expected to consist of 3D woven composite architectures. It is well known that composites can be tailored to achieve desired mechanical and thermal properties in various directions and thus can be made fit-for-purpose if the proper combination of constituent materials and microstructures can be realized. In the present work, the first, multiscale, atomistically-informed, computational analysis of mechanical and thermal properties of a present day - Carbon/Phenolic composite Thermal Protection System (TPS) material is conducted. Model results are compared to measured in-plane and out-of-plane mechanical and thermal properties to validate the computational approach. Results indicate that given sufficient microstructural fidelity, along with lowerscale, constituent properties derived from molecular dynamics simulations, accurate composite level (effective) thermo-elastic properties can be obtained. This suggests that next generation TPS properties can be accurately estimated via atomistically informed multiscale analysis.

Materials Science↗

Study of seismic diffractions caused by a fracture zone at In Salah carbon dioxide storage project

The In Salah CO 2 storage project in Algeria has injected over 3 million tonnes of carbon dioxide into a water filled tight sand formation. Interferometric Synthetic Aperture Radar (InSAR) range change data revealed a double lobbed pattern of deformation that has been modeled as the opening of a sub-vertical fracture, or damage, zone. The location and geometry of the linear feature were subsequently verified using a seismic reflection survey. The elastic properties of the fracture zone, including anisotropic Poisson ratio ( ν ), Young's ( E ) and shear ( G ) moduli, were estimated from coupled geomechanical and hydrological modeling of surface deformation and pressure variations in the injection well. The elastic moduli reflect the fracture properties after CO 2 flow through the fracture zone. Thus, the seismic signature of the fracture zone could be used for monitoring the CO 2 plume. Using the estimated fracture model, we built two and three dimensional models consisting of an anisotropic fracture zone embedded within an isotropic background. Finite-difference modeling of seismic shot gathers allows us to estimate the effects of scattering from the fracture zone, potentially further constraining the geomechanical model. From the seismic modeling results, we find diffracted waves, induced by the fracture zone, which behave similar to point source diffractions. This modeling is intended to guide a search for diffraction events in the 3D surface seismic field data. The modeling results indicate that using the moduli estimated from geomechanical modeling, fracture scattered events would be 100 times lower amplitude than the interface reflections, and thus would be hard to detect. While diffracted waves are observed in the field data, which may imply the need for revision of the fracture model, including shape and elastic moduli, we are not able to match the field observation with our modeled events. This article presents a frontier study on the integration of geomechanical and geophysical methods at the In Salah site as a means to test the estimate of the subsurface CO 2 flooded fracture properties.

58 GEOSCIENCES↗

Mapping the mechanical properties of rocks using automated microindentation tests

A microindentation scanner is constructed that measures the spatial fluctuation in the elastic properties of natural rocks. This novel instrument performs automated indentation tests on the surface of a rock slab and outputs 2-D maps of the indentation modulus at submillimeter resolution. Maps obtained for clean, well-consolidated, sandstone are presented and demonstrate the capabilities of the instrument. We postulate that the elastic structure of sandstones correlates well with their visual appearance. Moreover, we observe that the probability distribution of the indentation modulus fluctuations across the slab surfaces can be modeled using a lognormal probability density function. To illustrate possible use of the data obtained with the microindentation scanner, we use roughly 10 cm × 10 cm scans with millimeter resolution over four sandstone planar slabs to numerically compute the overall drained elastic moduli for each sandstone sample. We demonstrate that such numerically computed moduli are well modeled using the multicomponent form of the Hashin-Shtrikman lower bound that employs the observed lognormal probability distribution for the mesoscopic-scale moduli (the geometric mean works almost the same). We also compute the seismic attenuation versus frequency associated with wave-induced fluid flow between the heterogeneities in the scanned sandstones and report relatively small values for the inverse quality factor (Q -1 <10 -2 ) in the seismic frequency band 10 2 Hz 4 Hz. The numerically computed frequency dependence in the attenuation varies from one type of sandstone to another, and we determine vital anisotropy in the attenuation associated with waves propagating in different directions.

58 GEOSCIENCES↗

A multinuclear static NMR study of geopolymerisation

Geopolymers are inorganic binders obtained by alkali activation of aluminosilicates. While the structure of geopolymers is now well understood, the details of the geopolymerisation reaction and their impact on the rheology of the paste remain uncertain. In this work, we follow the elastic properties of a paste made with metakaolin and sodium silicate solution. After the first sharp increase of elastic modulus occurring a few hundred of seconds after mixing and related to the heterogeneous formation of an alumina–silicate gel with a molar ratio Si/Al < 4 located at the grains boundaries, we focus on the progressive increase in elastic modulus on a period of few hours during the setting of the geopolymer. In this study, we combine the study of rheological properties of the paste with {sup 23}Na, {sup 27}Al and {sup 29}Si static NMR measurement in order to better understand the origin of this second increase in elastic modulus. Our results show that, after a few hours, Al and Na evolution in the liquid phase are concomitant. This suggests the precipitation of an aluminosilicate phase where Al is in tetrahedral position and Na compensates the charge. Furthermore, Si speciation confirms this result and allows us to identify the precipitation of a product, which has a chemical composition close to the final composition of geopolymer. This study provides strong evidence for a heterogeneous formation of an aluminosilicate glass directly from the first gel and the silicate solution without the need for a reorganisation of Gel 1 into Gel 2.

36 MATERIALS SCIENCE↗

Mechanical properties of structural amorphous steels: Intrinsic correlations, conflicts, and optimizing strategies

Amorphous steels have demonstrated superior properties and great potentials for structural applications since their emergence, yet it still remains unclear about how and why their mechanical properties are correlated with other factors and how to achieve intended properties by designing their compositions. Here, the intrinsic interdependences among the mechanical, thermal, and elastic properties of various amorphous steels are systematically elucidated and a general trade-off relation is exposed between the strength and ductility/toughness. Encouragingly, a breakthrough is achievable that the strength and ductility/toughness can be simultaneously improved by tuning the compositions. The composition dependences of the properties and alloying effects are further analyzed thoroughly and interpreted from the fundamental plastic flow and atomic bonding characters. Most importantly, systematic strategies are outlined for optimizing the mechanical properties of the amorphous steels. The study may help establish the intrinsic correlations among the compositions, atomic structures, and properties of the amorphous steels, and provide useful guidance for their alloy design and property optimization. Thus, it is believed to have implications for the development and applications of the structural amorphous steels.

36 MATERIALS SCIENCE↗

Calibrating the Abaqus Crushable Foam Material Model using UNM Data

Triaxial test data from the University of New Mexico and uniaxial test data from W-14 is used to calibrate the Abaqus crushable foam material model to represent the syntactic foam comprised of APO-BMI matrix and carbon microballoons used in the W76. The material model is an elasto-plasticity model in which the yield strength depends on pressure. Both the elastic properties and the yield stress are estimated by fitting a line to the elastic region of each test response. The model parameters are fit to the data (in a non-rigorous way) to provide both a conservative and not-conservative material model. The model is verified to perform as intended by comparing the values of pressure and shear stress at yield, as well as the shear and volumetric stress-strain response, to the test data.

36 MATERIALS SCIENCE↗

Multidisciplinary research leading to utilization of extraterrestrial resources

Progress of the research accomplished during fiscal year 1972 is reported. The summaries presented include: (1) background analysis and coordination, (2) surface properties of rock in simulated lunar environment, (3) rock failure processes, strength and elastic properties in simulated lunar environment, (4) thermal fragmentation, and thermophysical and optical properties in simulated lunar environment, and (5) use of explosives on the moon.

Source record↗

First-principles study of mechanical properties of zirconium alloys and hydrides

Zirconium alloys have been extensively used as fuel cladding materials in nuclear light water reactors (LWRs) due to their favorable mechanical properties, corrosion resistance, low thermal neutron capture cross section and criticality. Because the main functions of these structural materials are to maintain the integrity of UO{sub 2} fuel rods and prevent the release of fission products into the biosphere, a detailed knowledge of their structural stability is of critical importance to ensure the safe operation of nuclear reactors, and the safety of storage, transportation or disposition of used nuclear fuel assemblies. While the Zr-H phase diagram has been known since the 1950's and has remained largely unchanged, the structures, formation mechanisms, and stability of Zr-hydride phases in pure α-Zr or Zr alloys matrices have been subjects of much debate over the last few decades. The formation of hydride phases in the Zr matrix has been linked in previous studies to the degradation of mechanical properties of Zr/Zr-alloys materials. Therefore, an accurate knowledge of the interplay between the structures, stability and mechanical properties of Zr/Zr-alloys and Zr hydrides is of paramount significance to ensure materials reliability during their in- service lifetime. Despite few first-principles studies have investigated the mechanical stability of Zr hydrides polymorphs proposed so far, no ab initio studies have been carried out, to the best of our knowledge, on the mechanical properties of modern nuclear-grade zirconium alloys such as Zircaloy-4 (Zry-4; 1.2-1.7% Sn), Zirconium low oxidation alloy (ZIRLO; 0.7-1.0% Sn and ∼1.0% Nb), or M5 alloy (0.8-1.2% Nb). Therefore, it is important to carry out a series of first-principles calculations systematically to investigate the structure-property relationship of zirconium hydrides and zirconium alloys, that can help explain differences in elastic properties between high-purity zirconium and nuclear-grade zirconium alloys. (authors)

21 SPECIFIC NUCLEAR REACTORS AND ASSOCIATED PLANTS↗

Sensitivity of the coefficients of thermal expansion of selected graphite reinforced composite laminates to lamina thermoelastic properties

An analytical study of the sensitivity of the laminate coefficient of thermal expansion, CTE, to changes in lamina elastic properties has been made. High modulus graphite/epoxy (P75/934, P100/934, P120/934), graphite/aluminum (P100/Al), and graphite/glass (HMS/Gl) composite materials were considered in quasi-isotropic, low thermal stress, and 'near-zero' thermal expansion laminate configurations. The effects of a positive or negative 10 percent change in lamina properties on laminate CTE is strongly dependent upon both the composite material and the laminate configuration. A 10 percent change in all of the lamina properties had very little effect on the laminate CTE of the HMS/Gl composite laminates investigated. The sensitivity and direction of change in the laminate CTE of Gr/934 depended very strongly on the fiber properties. A 10 percent change in the lamina transverse CTE resulted in changes as large as 0.216 ppm/C in the laminate CTE of a quasi-isotropic Gr/934 laminate. No significant difference was observed in the sensitivity of the laminate CTE of the P100/934 and P120/934 composite materials due to changes in lamina properties. Large changes in laminate CTE can result from measured temperature and radiation effects on lamina properties.

Tompkins, S. S.↗

Novel silicon allotropes: Stability, mechanical, and electronic properties

One quasi-direct gap phase (Amm2) and three indirect gap phases (C2/m-16, C2/m-20, and I-4) of silicon allotropes are proposed. The detailed theoretical study on the structure, density of states, elastic properties, sound velocities, and Debye temperature of these four phases is carried out by using first principles calculations. The elastic constants of these four phases are calculated by strain-stress method. The elastic constants and the phonon calculations manifest all novel silicon allotropes in this paper are mechanically and dynamically stable at ambient condition. The B/G values indicate that these four phases of silicon are brittle materials at ambient pressure. The anisotropy properties show that C2/m-20 phase exhibits a larger anisotropy in its elastic modulus, shear elastic anisotropic factors, and several anisotropic indices than others. We have found that the Debye temperature of the four novel silicon allotropes gradually reduces in the order of C2/m-20 > Amm2 > C2/m-16 > I-4 at ambient pressure.

71 CLASSICAL AND QUANTUM MECHANICS, GENERAL PHYSIC↗

Assessment of chemo-mechanical impacts of CO 2 sequestration on the caprock formation in Farnsworth oil field, Texas

This study evaluates the chemo-mechanical influence of injected CO 2 on the Morrow B sandstone reservoir and the upper Morrow shale caprock utilizing data from the inverted 5-spot pattern centered on Well 13-10A within the Farnsworth unit (FWU). This study also seeks to evaluate the integrity of the caprock and the long-term CO 2 storage capability of the FWU. The inverted 5-spot pattern was extracted from the field-scale model and tuned with the available field observed data before the modeling work. Two coupled numerical simulation models were utilized to continue the study. First, a coupled hydro-geochemical model was constructed to simulate the dissolution and precipitation of formation minerals by modeling three intra-aqueous and six mineral reactions. In addition, a coupled hydro-geomechanical model was constructed and employed to study the effects of stress changes on the caprock’s porosity, permeability, and ground displacement. The Mohr–Coulomb circle and failure envelope were used to determine caprock failure. In this work, the CO 2 -WAG injection is followed by the historical field-observed strategy. During the forecasting period, a Water Alternating Gas (WAG) injection ratio of 1:3 was utilized with a baseline bottom-hole pressure constraint of 5500 psi for 20 years. A post-injection period of 1000 years was simulated to monitor the CO 2 plume and its effects on the CO 2 storage reservoir and caprock integrity. The simulation results indicated that the impacts of the geochemical reactions on the porosity of the caprock were insignificant as it experienced a decrease of about 0.0003% at the end of the 1000-year post-injection monitoring. On the other hand, the maximum stress-induced porosity change was about a 1.4% increase, resulting in about 4% in permeability change. It was estimated that about 3.3% of the sequestered CO 2 in the formation interacted with the caprock. Despite these petrophysical property alterations and CO 2 interactions in the caprock, the caprock still maintained its elastic properties and was determined to be far from its failure.

04 OIL SHALES AND TAR SANDS↗

Confocal acoustic radiation force optical coherence elastography using a ring ultrasonic transducer

We designed and developed a confocal acoustic radiation force optical coherence elastography system. A ring ultrasound transducer was used to achieve reflection mode excitation and generate an oscillating acoustic radiation force in order to generate displacements within the tissue, which were detected using the phase-resolved optical coherence elastography method. Both phantom and human tissue tests indicate that this system is able to sense the stiffness difference of samples and quantitatively map the elastic property of materials. Our confocal setup promises a great potential for point by point elastic imaging in vivo and differentiation of diseased tissues from normal tissue.

62 RADIOLOGY AND NUCLEAR MEDICINE↗

Shear wave generation by mode conversion in picosecond ultrasonics: Impact of grain orientation and material properties

Abstract Picosecond ultrasonics has seen wide application in the investigation of interfaces in semiconductors and 3D imaging in biological systems. Shear ultrasonic waves are important for elastic constant and grain orientation measurement in ceramic materials. In this study, we investigate the impact of grain orientation and material's elastic properties on the generation efficiency of shear waves by mode conversion at a transducer thin film/substrate interface. The solution of acoustic wave equations suggests that crystal grain orientation has a strong impact on the generated shear wave amplitude. This dependence is found to be closely related to the magnitude of longitudinal component of wave displacements. The applicability of analytical model is validated by the experimental results from time‐domain Brillouin scattering. Moreover, material properties determine acoustic wave amplitudes based on the acoustic mismatch model and, particularly, large elastic anisotropy defined by Zener ratio favors strong shear waves. In the light of this analysis, several recommendations on suitable grain orientations and film materials are made to facilitate shear wave detection.

Wang, Yuzhou↗

Mechanical properties of refractory high-entropy alloys: Experiments and modeling

Refractory high-entropy alloys hold the potential for high-temperature applications beyond the capability of the state-of-the-art Ni-based superalloys, and thus, it is important to study their solid solution formation characteristics and mechanical properties. In this study, designed by CALPHAD method, formation of as-cast arc-melted body-centered cubic MoNbTaTiV was experimentally verified using X-ray diffraction and scanning electron microscopy. The measured density and lattice parameter for MoNbTaTiV are 9.29 g/cm3 and 3.224 Å, which obey the rule of mixtures (ROM). The alloy exhibits high hardness at 443 Hv, high yield strength at 1.4 GPa, and good compressive fracture strength at 2.45 GPa with a fracture strain of ~30% at room temperature. The yield strength and hardness values of this alloy, and other single-phase refractory high-entropy alloys, are estimated using a simple model of solid solution strengthening. Reasonable agreement between modeling prediction and experiments is obtained. In addition, first-principles density functional theory calculations predict an enthalpy of formation of -0.865 kJ/mol for the MoNbTaTiV alloy, with calculated atomic volume and elastic properties (e.g., bulk and elastic moduli) obeying the ROM.

36 MATERIALS SCIENCE↗

Rock physics properties of some lunar samples

Linear strains and acoustic velocity data for lunar samples under uniaxial and hydrostatic loading are presented. Elastic properties are presented for 60335,20; 15555,68; 15498,23; and 12063,97. Internal friction data are summarized for a number of artificial lunar glasses with compositions similar to lunar rocks 12009, 12012, 14305, 15021, and 15555. Zero porosity model-rock moduli are calculated for a number of lunar model-rocks, with mineralogies similar to Apollo 12, 14, and 16 rocks. Model-rock calculations indicate that rock types in the troctolitic composition range may provide reasonable modeling of the lunar upper mantle. Model calculations involving pore crack effects are compatible with a strong dependence of rock moduli on pore strain, and therefore of rock velocities on nonhydrostatic loading. The high velocity of rocks under uniaxial loading appears to be compatible with, and may aid in, interpretation of near-surface velocity profiles observed in the active seismic experiment.

Warren, N.↗