Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dynamic model reduction”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2020

Numerical Investigation of Fuel Property Effects on Mixed-Mode Combustion in a Spark-Ignition Engine

In this research, lean mixed-mode combustion is numerically investigated using computational fluid dynamics (CFD) in a spark-ignition engine. A new E30 fuel surrogate is developed using a neural network model with matched octane numbers. A skeletal mechanism is also developed by automated mechanism reduction and by incorporating a NO x submechanism. A hybrid approach that couples the G-equation model and the well-stirred reactor model is employed for turbulent combustion modeling. The developed CFD model is shown to well predict pressure and apparent heat release rate (AHRR) traces compared with experiment. Two types of combustion cycles (deflagration-only and mixed-mode cycles) are observed. The mixed-mode cycles feature early flame propagation and subsequent end-gas auto-ignition, leading to two distinctive AHRR peaks. The validated CFD model is then employed to investigate the effects of NO x chemistry. The NO x chemistry is found to promote auto-ignition through the residual gas, while the deflagration phase remains largely unaffected. Sensitivity analysis is finally performed to understand effects of fuel properties, including heat of vaporization (HoV) and laminar flame speed (S L ). An increased HoV tends to suppress auto-ignition through charge cooling, while the impact of HoV on flame propagation is insignificant. In contrast, an increased S L is found to significantly promote both flame propagation and end-gas auto-ignition. The promoting effect of S L on auto-ignition is not a direct chemical effect; it is rather caused by an advancement of the combustion phasing, which increases compression heating of the end-gas.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
NASA NTRS1985

Parameter identification for a robotic manipulator arm

The development is described of a nonlinear dynamic model for large oscillations of a robotic manipulator arm about a single joint. Optimization routines are formulated and implemented for the identification of electrical and physical parameters from dynamic data taken from an industrial robot arm. Special attention is given to the role of sensitivity in the formulation of robust models of this motion. The importance of actuator effects in the reduction of sensitivity is established and used to develop an electromechanical model of the manipulator system.

Brewer, D. W.↗
NASA NTRS1995

An a priori model for the reduction of nutation observations: KSV(1994.3) nutation series

We discuss the formulation of a new nutation series to be used in the reduction of modern space geodetic data. The motivation for developing such a series is to develop a nutation series that has smaller short period errors than the IAU 1980 nutation series and to provide a series that can be used with techniques such as the Global Positioning System (GPS) that have sensitivity to nutations but can directly separate the effects of nutations from errors in the dynamical force models that effect the satellite orbits. A modern nutation series should allow the errors in the force models for GPS to be better understood. The series is constructed by convolving the Kinoshita and Souchay rigid Earth nutation series with an Earth response function whose parameters are partly based on geophysical models of the Earth and partly estimated from a long series (1979-1993) of very long baseline interferometry (VLBI) estimates of nutation angles. Secular rates of change of the nutation angles to represent corrections to the precession constant and a secular change of the obliquity of the ecliptic are included in the theory. Time dependent amplitudes of the Free Core Nutation (FCN) that is most likely excited by variations in atmospheric pressure are included when the geophysical parameters are estimated. The complex components of the prograde annual nutation are estimated simultaneously with the geophysical parameters because of the large contribution to the nutation from the S(sub 1) atmospheric tide. The weighted root mean square (WRMS) scatter of the nutation angle estimates about this new model are 0.32 mas and the largest correction to the series when the amplitudes of the ten largest nutations are estimated is 0.18 +/- 0.03 mas for the in phase component of the prograde 18. 6 year nutation.

Herring, T. A.↗
DOE OSTI2020

Destructive reverse bias pinning in perovskite/silicon tandem solar modules caused by perovskite hysteresis under dynamic shading

In this work, we demonstrate how perovskite hysteresis can result in permanent reductions in power output in perovskite/silicon tandem modules—including irreversible hotspot-induced damage—from only brief periods of shading. We show that reverse bias events in which a perovskite cell is biased above a threshold voltage—which in this work we find to be as low as –1.1 V—produces a temporary reduction in power output that is of sufficient magnitude to keep the cell pinned in reverse bias after the shading event ends. As a hysteretic phenomena, this crucial failure mode may be overlooked by static models of perovskite-based solar cells. Higher reverse bias voltages exacerbate the temporary reduction in short-circuit photocurrent, which is also sensitive to the level of illumination under reverse bias. Numerical device modelling demonstrates that this effect is consistent with our understanding of perovskite hysteresis as a consequence of mobile ion-electron coupling controlling rates of non-radiative recombination over time. Measurements of the dynamic response of single-junction perovskite cells are extrapolated to two-terminal and four-terminal perovskite/silicon tandem module modelling. We validate these models with measurements from an equivalent electronic circuit that represents a two-terminal perovskite–silicon tandem mini module. Two module-level solutions are discussed that address this issue, which includes increasing the number of bypass diodes and choosing better suited silicon bottom cells with higher shunter resistance in two-terminal tandem modules.

14 SOLAR ENERGY↗
DOE OSTI2024

Oscillating surge wave energy converter using a novel above-water power takeoff with belt-arc speed amplification

We investigate the performance of a novel power takeoff (PTO) featuring belt-arc speed amplification for oscillating surge wave energy converters (OSWECs), aiming to address the challenges of extremely low rotary speed and large torque under the low-frequency ocean wave excitations. The belt-arc design significantly increases the rotary speed of the generator, enabling generator downsizing and decreasing the powertrain friction losses. The design also allows for placing the generator above water, eliminating the need for high Ingress Protection ratings for the generator and powertrain, and potentially leading to substantial reductions in capital and maintenance costs. Using the linear potential wave theory, the dynamics of the integrated system are analyzed, and key parameters are identified. To validate the numerical analysis, a 1:10 scale model is designed, fabricated, and tested in a wave tank. Performance evaluations are conducted under regular and irregular wave conditions, with quantified effects of parameter tuning. The results reveal an optimal wave-to-electric efficiency of 48% under regular wave excitation and 20% under irregular excitation. Furthermore, these findings underscore the effectiveness of the proposed novel PTO design in addressing the challenges of low rotation speed and large torque inherent in OSWECs, demonstrating its ability to efficiently convert wave power into electricity.

16 TIDAL AND WAVE POWER↗
DOE OSTI2022

Estimating the population level impact of a gonococcal vaccine candidate: Predictions from a simple mathematical model

Neisseria gonorrhoeae cross-protection was suggested in a New Zealand meningitis B vaccine. We modeled the potential impact of similar vaccines on gonorrhea prevalence in heterosexuals in the United States. Here, our mathematical model incorporated infection, behavior, and vaccination dynamics. Approximate Bayesian Computation calibrated our model to US prevalence. Primary analyses assumed New Zealand vaccine characteristics: 30% efficacy and 2-year duration of protection. We estimated impact under two vaccine coverages (20%, 50%). Reduction in gonorrhea prevalence ranged from 4.8 to 39.4%, depending on vaccine coverage. Vaccine impact was correlated with both size of the highly sexually active subpopulation and sexual mixing between high and low activity subpopulations. A meningitis vaccine providing low efficacy cross-protection against gonorrhea acquisition and short duration of protection could result in a large reduction in gonorrhea prevalence in the United States. Potential dual protective effects can be considered when making vaccine recommendations.

60 APPLIED LIFE SCIENCES↗
DOE OSTI2024

Self-Inhibition Phenomena in Cu 3 Pt Oxidation by CO 2

Here, this study investigates the oxidation behavior of Cu 3 Pt(100) in CO 2 using a combination of ambient-pressure X-ray photoelectron spectroscopy, mass spectroscopy, and density functional theory modeling. Our in situ measurements reveal the simultaneous oxidation and reduction of Cu 2 O due to the opposing effects of atomic oxygen and CO generated from dissociative CO 2 adsorption, leading to a dynamic equilibrium state of simultaneously occurring redox reactions. Complementary atomistic calculations elucidate the inhibitory effects of subsurface Pt enrichment and the counteracting roles of CO 2 and CO in surface oxidation and reduction. These results provide mechanistic insights into the dissociative pathway of CO 2 molecules and dynamic evolution of surface composition and reactivity of Cu-based alloy catalysts in CO 2 -rich environments, with broader implications for tuning gas–surface reactions by manipulating gas reactants or solid surface composition.

36 MATERIALS SCIENCE↗
DOE OSTI2024

A Novel Emergent Constraint Approach for Refining Regional Climate Model Projections of Peak Flow Timing

Abstract Global climate models (GCMs) are unable to produce detailed runoff conditions at the basin scale. Assumptions are commonly made that dynamical downscaling can resolve this issue. However, given the large magnitude of the biases in downscaled GCMs, it is unclear whether such projections are credible. Here, we use an ensemble of dynamically downscaled GCMs to evaluate this question in the Sierra‐Cascade mountain range of the western US. Future projections across this region are characterized by earlier seasonal shifts in peak flow, but with substantial inter‐model uncertainty (−25 ± 34.75 days, 95% confidence interval (CI)). We apply the emergent constraint (EC) method for the first time to dynamically downscaled projections, leading to a 39% (−28.25 ± 20.75 days, 95% CI) uncertainty reduction in future peak flow timing. While the constrained results can differ from bias corrected projections, the EC is based on GCM biases in historical peak flow timing and has a strong physical underpinning.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2021

Observations of pressure anisotropy effects within semi-collisional magnetized plasma bubbles

Magnetized plasma interactions are ubiquitous in astrophysical and laboratory plasmas. Various physical effects have been shown to be important within colliding plasma flows influenced by opposing magnetic fields, however, experimental verification of the mechanisms within the interaction region has remained elusive. Here we discuss a laser-plasma experiment whereby experimental results verify that Biermann battery generated magnetic fields are advected by Nernst flows and anisotropic pressure effects dominate these flows in a reconnection region. These fields are mapped using time-resolved proton probing in multiple directions. Various experimental, modelling and analytical techniques demonstrate the importance of anisotropic pressure in semi-collisional, high- β plasmas, causing a reduction in the magnitude of the reconnecting fields when compared to resistive processes. Anisotropic pressure dynamics are crucial in collisionless plasmas, but are often neglected in collisional plasmas. We show pressure anisotropy to be essential in maintaining the interaction layer, redistributing magnetic fields even for semi-collisional, high energy density physics (HEDP) regimes.

70 PLASMA PHYSICS AND FUSION TECHNOLOGY↗
DOE OSTI2021

Noise reduction in X-ray photon correlation spectroscopy with convolutional neural networks encoder–decoder models

Abstract Like other experimental techniques, X-ray photon correlation spectroscopy is subject to various kinds of noise. Random and correlated fluctuations and heterogeneities can be present in a two-time correlation function and obscure the information about the intrinsic dynamics of a sample. Simultaneously addressing the disparate origins of noise in the experimental data is challenging. We propose a computational approach for improving the signal-to-noise ratio in two-time correlation functions that is based on convolutional neural network encoder–decoder (CNN-ED) models. Such models extract features from an image via convolutional layers, project them to a low dimensional space and then reconstruct a clean image from this reduced representation via transposed convolutional layers. Not only are ED models a general tool for random noise removal, but their application to low signal-to-noise data can enhance the data’s quantitative usage since they are able to learn the functional form of the signal. We demonstrate that the CNN-ED models trained on real-world experimental data help to effectively extract equilibrium dynamics’ parameters from two-time correlation functions, containing statistical noise and dynamic heterogeneities. Strategies for optimizing the models’ performance and their applicability limits are discussed.

36 MATERIALS SCIENCE↗
DOE OSTI2026

Integration of GOES Data for Solar Resource Assessment of the Contiguous United States

The National Solar Radiation Database (NSRDB), produced by the National Laboratory of the Rockies (NLR), provides high-resolution solar resource data for the contiguous United States (CONUS) using Geostationary Operational Environmental Satellite (GOES) East and West observations. This study evaluates the integration of multi-satellite data within the GOES-East/West overlap regions, where conventional longitude-based selection methods often produce an artificial boundary seam. Our results demonstrate that an advanced blending algorithm, which incorporates sun-satellite scattering angles and satellite viewing zenith angles, improves NSRDB accuracy and creates a spatially continuous dataset. Validation against ground-based irradiance measurements reveals reductions in both percentage error (PE) and normalized Root Mean Square Error (nRMSE), particularly in the central United States. The dynamical integration of multi-satellite data provides a robust foundation for more precise modeling of solar resource and improved spatiotemporal analysis of solar ramp across the CONUS.

14 SOLAR ENERGY↗
NASA NTRS1989

Active-member control of precision structures

This paper presents the results of closed loop experiments that use piezoelectric active-members to control the flexible motion of a precision truss structure. These experiments are directed toward the development of high performance structural systems as part of the Control/Structure Interaction program at JPL. Order of magnitude reductions in dynamic response are achieved with relatively simple control techniques. The practical implementation of high stiffness, high bandwidth active-members in a precision structure highlights specific issues of importance relating to the modelling and implementation of active-member control.

Fanson, J. L.↗
DOE OSTI2020

Relative Impact of Sea Ice and Temperature Changes on Arctic Marine Production

We use a modern Earth system model to approximate the relative importance of ice versus temperature on Arctic marine ecosystem dynamics. We show that while the model adequately simulates ice volume, water temperature, air-sea CO 2 flux, and annual primary production in the Arctic, itunderestimates upper water column nitrate across the region. This nitrate bias is likely responsible for the apparent underestimation of ice algae production. Despite this shortcoming, the model appears to be a useful tool for exploring the impacts of environmental change on phytoplankton production and carbon dynamics over the Arctic Ocean. Our experiments indicate that under a warmer climate scenario, the percentage of ocean warming that could be apportioned to a reduction in ice area ranged from 11% to 100%, while decreasing ice area could account for 22–100% of the increase in annual ocean primary production. The change to CO2 air-sea flux in response to ice and temperature changes averaged an Arctic-wide 5.5 Tg C yr –1 (3.5%) increase, into the ocean. This increased carbon sink may be short-lived, as ice cover continues to decrease and the ocean warms. The change in carbon fixation from phytoplankton in response to increased temperatures and reduced ice was generally more than a magnitude larger than the changes to CO 2 flux, highlighting the importance of fully considering changes to the marine ecosystem when assessing Arctic carbon cycle dynamics. Our work demonstrates the importance of ice dynamics in controlling ocean warming and production and thus the need for well-behaved ice and BGC models within Earth system models if we hope to accurately predict Arctic changes.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2025

Experimental Soil Warming Impacts Soil Moisture and Plant Water Stress and Thereby Ecosystem Carbon Dynamics

Experimental soil heating experiments have found a consistent increase in soil-surface CO 2 emissions ( F s ), but inconsistent soil organic carbon (SOC) responses. Interpretation of heating effects is complicated by spatial heterogeneity and soil moisture, nitrogen availability, and microbial and plant responses. Here we applied a mechanistic ecosystem model to interpret heating impacts on a California forest subjected to 1 m deep, 4°C heating. The model accurately simulated control-plot CO 2 fluxes, SOC stocks, fine root biomass, soil moisture, and soil temperature, and the observed increases in F s and decreases in fine root biomass. We show that a complex suite of interactions can lead to a consistent increase in F s (~17%) over the 5-year study period, with very small changes in SOC stocks (<1%). Modeled increases in leaf water stress from soil drying reduced GPP and NPP. The resulting reduction in leaf and fine root allocation increased fine root litter inputs to the soil and reduced root exudation. Soil heating led to about a 50% larger increase in root autotrophic respiration than in heterotrophic respiration, with the heating effect on both these fluxes decreasing over the simulation period. Increased heterotrophic respiration led to increased soil N availability and plant N uptake. These heating responses are mechanistically linked, of magnitudes that can affect ecosystem dynamics, and long-term observations of them are rarely made. Therefore, we conclude that a coupled observational and mechanistic modeling framework is needed to interpret manipulation experiments, and to improve projections of climate change impacts on terrestrial ecosystem carbon dynamics.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2023

Cost-constrained adaptive simulations of transient spray combustion in a gas turbine combustor

Predictive high-fidelity simulations of turbulent spray combustion must capture the combined effects of complex chemistry, multiphase evaporating flow and spray-flame interactions to achieve physical accuracy. Finite-rate chemistry (FRC) combined with a realistic chemical mechanism is a combustion model well-suited for this purpose, but has a high computational cost due to the large number and stiffness of transported chemical species. In contrast, flamelet-based models achieve lower cost by transporting a small number of quantities of reduced stiffness, but assumptions regarding local flame topology, boundary conditions and inter-phase coupling limit their physical accuracy. Recently, the Pareto-efficient combustion (PEC) framework was developed to dynamically assign combustion models based on local cost and accuracy metrics in gas-phase reacting flows. In this work, we extend this PEC framework to spray combustion through the rigorous analysis of the multiphase coupling terms in the governing equations. The derivation shows that spray evaporation causes errors in the prediction of species mass fractions for flamelet-based models due to the sensitivity of the local thermo-chemical state to changes in composition caused by fuel vaporization across combustion regimes present in practical spray combustion devices. Sub-model assignment is formulated as a multiple-choice knapsack problem, where computational cost is directly controlled through the fraction of the domain assigned to the FRC sub-model. The extended PEC formulation is applied to the simulation of a realistic rich-quench-lean gas turbine combustor at steady-state conditions, as well as transient operation resulting in lean blow-out (LBO). Analysis of transient simulations during LBO demonstrates the extended PEC formulation’s capacity to dynamically adapt to changing conditions within the combustor. Transient combustor dynamics are shown to approach convergence with limited increases in computational cost, while retaining substantial computational cost reduction compared to monolithic FRC simulations. Through PEC simulations with increasing fractions of the domain assigned to FRC, monolithic flamelet simulations are shown to over-predict flame stability during LBO. Finally, the extended PEC formulation is thus shown to overcome deficiencies of monolithic models by controlling modeling error for multiphase combustion modeling.

33 ADVANCED PROPULSION SYSTEMS↗
DOE OSTI2020

Identification of the Electronic and Structural Dynamics of Catalytic Centers in Single-Fe-Atom Material

The lack of model single-atom catalysts (SACs) and atomic-resolution operando spectroscopic techniques greatly limits our comprehension of the nature of catalysis. Herein, based on the designed model single-Fe-atom catalysts with well-controlled microenvironments, we have explored the exact structure of catalytic centers and provided insights into a spin-crossover-involved mechanism for oxygen reduction reaction (ORR) using operando Raman, X-ray absorption spectroscopies, and the developed operando 57 Fe Mössbauer spectroscopy. In combination with theoretical studies, the N-FeN 4 C 10 moiety is evidenced as a more active site for ORR. Moreover, the potential-relevant dynamic cycles of both geometric structure and electronic configuration of reactive single-Fe-atom moieties are evidenced via capturing the peroxido (*O 2 -) and hydroxyl (*OH-) intermediates under in situ ORR conditions. Overall, we anticipate that the integration of operando techniques and SACs in this work shall shed some light on the electronic-level insight into the catalytic centers and underlying reaction mechanism.

37 INORGANIC, ORGANIC, PHYSICAL, AND ANALYTICAL CH↗
DOE OSTI2022

Invertible Neural Networks for Aerodynamic Design of Wind Turbine Blades

The state-of-the-practice methods for aerodynamic design of wind turbine blads use linearized blade element momentum theory (BEM) to optimize the twist and chord profiles from a pre-selected set of 2D airfoil shapes. In this work, we apply invertible neural network (INN) tools to enable the rapid inverse aerodynamic design of wind turbine blades including component airfoils. The INN is trained on data obtained through the use of robust automated mesh generation and the HAMSTR computational fluid dynamics solver with advanced turbulence and transition models validated for turbine applications. Our design technique is a significant improvement over the state-of-the-practice linearized blade element momentum (BEM) techniques in capturing 3D nonlinear aerodynamic effects that are critical for optimal design of the rotors. This is made possible by developing sparse, invertible neural networks (INNs) for inverse design and optimization that realize a 100x cost reduction compared to adjoint-based computational fluid dynamics (CFD) approaches, while enabling increased robustness of the final design. We demonstrate the INN tool for design of a section of the NREL 5-MW blade. All generated shapes satisfy the desired aerodynamic characteristics, demonstrating the success of the INN approach for inverse design of wind turbine blades.

aerodynamic design↗
NASA NTRS1975

Strain gaged struts and data reduction techniques to maximize quality data from spacecraft flight measurements

The flight instrumentation for the Viking project was established to obtain environmental data, and maximize the data obtainable from the limited number of telemetry channels. To achieve these objectives, a set of six struts were strain gaged and calibrated as load cells to obtain a complete force-time history across an interface. The force-time history can be used with an analytical model to calculate the response of any part of the structure above the instrumented interface. Special matched filters were required to reduce the flight data and derive the phase correlated loads. Flight data results from the Viking Dynamic Simulator flown in February 1974 are described in addition to ground test results used to verify the data reduction process.

Day, F. D., III↗