Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Dry processing”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
DOE OSTI2024

Climate change will reduce North American inland wetland areas and disrupt their seasonal regimes

Abstract Climate change can alter wetland extent and function, but such impacts are perplexing. Here, changes in wetland characteristics over North America from 25° to 53° North are projected under two climate scenarios using a state-of-the-science Earth system model. At the continental scale, annual wetland area decreases by ~10% (6%-14%) under the high emission scenario, but spatiotemporal changes vary, reaching up to ±50%. As the dominant driver of these changes shifts from precipitation to temperature in the higher emission scenario, wetlands undergo substantial drying during summer season when biotic processes peak. The projected disruptions to wetland seasonality cycles imply further impacts on biodiversity in major wetland habitats of upper Mississippi, Southeast Canada, and the Everglades. Furthermore, wetlands are projected to significantly shrink in cold regions due to the increased infiltration as warmer temperature reduces soil ice. The large dependence of the projections on climate change scenarios underscores the importance of emission mitigation to sustaining wetland ecosystems in the future.

54 ENVIRONMENTAL SCIENCES↗
DOE OSTI2020

Effects of deposition and annealing conditions on the crystallisation of NiTi thin films by e-beam evaporation

This Letter demonstrates the effects of deposition and annealing conditions on the crystallisation of nickel–titanium (NiTi) thin films deposited by the e-beam evaporation. NiTi thin films of 0.5 μm thick are fabricated on P-type (110) silicon substrates using the e-beam evaporation technique. We find that with the characterisations using the X-ray diffraction method, the results indicate that low e-beam deposition rate and argon employed annealing procedures can be beneficial to the formation of NiTi crystalline structure. Additionally, the as-deposited NiTi thin films without annealing procedures are amorphous, when deposited on the substrates at low temperatures. The differential scanning calorimetry studies show NiTi thin films formed by the e-beam evaporation are Ni-rich. Furthermore, SEM images illustrate that high-precision patterned NiTi thin film microstructures can be fabricated by combining with the e-beam evaporation and lift-off resist methods, without any wet or dry etching procedures. The proposed fabrication process for NiTi thin film microstructures shows great potential for application in shape memory alloy medical devices, as well as the micro-robotics.

36 MATERIALS SCIENCE↗
DOE OSTI2023

Techno-Economic Case Study: Low-Temperature Conversion Performance Based on Isolated Anatomical Fractions of Corn Stover

This report summarizes analysis conducted to support a case study under the Feedstock-Conversion Interface Consortium (FCIC) focused on techno-economic analysis (TEA) modeling to quantify the yield and cost ramifications for processing isolated anatomical fractions of corn stover through a low-temperature conversion (biochemical pathway) biorefinery. It is hypothesized that different individual anatomical fractions of corn stover vary in composition and recalcitrance, such that processing each fraction on its own e.g. through dedicated campaigns may enable economic benefits relative to processing the whole stover material. To investigate this concept, we worked with FCIC researchers to obtain data on compositional analysis, as well as processing conditions and yields, for conversion of whole corn stover plus three individual anatomical fractions (cobs, husks, and stalks) across key steps of the biorefinery conversion process within FCIC research scope, namely pretreatment and enzymatic hydrolysis. After running the data through the TEA models, fractionated cobs and husks achieved higher fuel yields and lower minimum fuel selling prices than whole corn stover, but stalks fared worse than whole stover on both metrics. The most direct takeaway from this assessment is that a biorefinery would stand to benefit economically from maximizing the use of cob and husk fractions while avoiding or minimizing the use of stalks, though recognizing practical constraints with this approach in maintaining an equivalent processing capacity (fixed at 2,000 dry metric tonne per day in all cases).

09 BIOMASS FUELS↗
DOE OSTI2026

Hybrid Bio-Based Composites: Enabling Cellulose Nanofiber (CNF) Incorporation into Composites via Macroscale Natural Fiber Carriers

Cellulose nanofibers (CNFs) have significant potential in composites as additives to improve mechanical properties, melt rheology, and more. However, agglomeration of CNFs is a key challenge in composite melt processing as obtaining nano-level dispersion of CNFs often requires cost- and energy-intensive processes (e.g., solvent exchange or freeze drying) due to the strong hornification tendencies of CNF. Herein, we avoid these challenges by using a natural fiber carrier method to integrate CNF into thermoplastic composites. Fibers are co-dried to create a hybrid fiber feedstock for compounding in which natural fibers are decorated with dispersed nanofibers. The hybridized fibers result in up to a 24% increase in tensile strength and up to a 35% increase in Young’s modulus compared to composites only containing natural fibers. The lignocellulosic nanofibers are found to outperform their purely cellulosic counterpart, which is theorized to be due to either an increased propensity for fibrillation of the lignocellulosic fibers or the increased hydrophobicity of the fibers due to the presence of lignin. Surface analysis of fiber feedstocks, via streaming potential measurements and dynamic light scattering (DLS), confirmed a significant change in the feedstock hydrophobicity before and after hybridization. While mild additions of CNF (1 wt.% on the macroscale fiber) do not impact the composite melt viscosity, the viscosity is found to increase at higher CNF loadings (5 wt.% on the macroscale fiber), indicating its utility as a rheology modifier. Lastly, use of these materials as novel feedstocks for medium-scale additive manufacturing in high-fidelity part production was demonstrated.

bio-based↗
NASA NTRS1974

Use of fluidic oscillator to measure fuel-air ratios of combustion gases

A fluidic oscillator was investigated for use in measuring fuel-air ratios in hydrocarbon combustion processes. The oscillator was operated with dry exhaust gas from an experimental combustor burning ASTM A-1 fuel. Tests were conducted with fuel-air ratios between 0.015 and 0.031. Fuel-air ratios determined by oscillator frequency were within 0.001 of the values computed from separate flow measurements of the air and fuel.

Riddlebaugh, S. M.↗
NASA NTRS1977

Development of flame resistant treatment for Nomex fibrous structures

Flame resistant fibrous materials for space shuttle application were developed through chemical modification of commercially available aromatic polyamide fibrous products. The new surface treatment was achieved in the laboratory by ultraviolet activation of the fabric in the presence of fluoroolefin monomers and a diluent gas. The monomers grafted under these conditions provide the improved properties of the fabric in flame resistance, chemical inertness, and nonwettability without the sacrifice of color or physical properties. The laboratory reaction vessel was scaled-up to a batch continuous process, which treats ten yards of the commercial width textiles. The treated commercial width Nomex (HT-10-41) from the scaled-up reactor is self-extinguishing in an oxygen-enriched environment, water-repellent, soft, silky, and improved in chemical resistance. Unlike most textile processes, the grafting unit operates under dry conditions and no chemical by-products have to be washed out of the finished product.

Toy, M. S.↗
NASA NTRS1978

Thermal resistance of naturally occurring airborne bacterial spores

Simulation of a heat process used in the terminal dry-heat decontamination of the Viking spacecraft is reported. Naturally occurring airborne bacterial spores were collected on Teflon ribbons in selected spacecraft assembly areas and subsequently subjected to dry heat. Thermal inactivation experiments were conducted at 105, 111.7, 120, 125, 130, and 135 C with a moisture level of 1.2 mg of water per liter. Heat survivors were recovered at temperatures of 135 C when a 30-h heating cycle was employed. Survivors were recovered from all cycles studied and randomly selected for identification. The naturally occurring spore population was reduced an average of 2.2 to 4.4 log cycles from 105 to 135 C. Heating cycles of 5 and 15 h at temperature were compared with the standard 30-h cycle at 111.7, 120, and 125 C. No significant differences in inactivation (alpha = 0.05) were observed between 111.7 and 120 C. The 30-h cycle differs from the 5- and 15-h cycles at 125 C. Thus, the heating cycle can be reduced if a small fraction (about 0.001 to 0.0001) of very resistant spores can be tolerated.

Puleo, J. R.↗
NASA NTRS1988

Are there carbonate deposits in the Valles Marineris, Mars?

The precipitation of 30 mbar of Martian atmosphere CO2 as carbonates in lakes is suggested to be the source of thick sequences of layered deposits found in the Valles Marineris. Support is adduced for this scenario from processes occurring in the perennially frozen dry valley lakes of Antarctica, where the lake water is supersaturated with atmospheric gases. Atmospheric CO2 would have accumulated in such Martian lakes as temperatures fell, and the presence of an insulating ice cover would have allowed liquid water to exist.

Mckay, Christopher P.↗
NASA NTRS1989

Are there carbonate deposits in the Valles Marineris, Mars?

The precipitation of 30 mbar of Martian atmosphere CO2 as carbonates in lakes is suggested to be the source of thick sequences of layered deposits found in the Valles Marineris. Support is adduced for this scenario from processes occurring in the perennially frozen dry valley lakes of Antarctica, where the lake water is supersaturated with atmospheric gases. Atmospheric CO2 would have accumulated in such Martian lakes as temperature fell, and the presence of an insulating ice cover would have allowed liquid water to exist.

Nedell, Susan S.↗
NASA NTRS1993

Safe Replacement For Asbestos In Nickel/Hydrogen Cells

Polyethylene fibers and potassium titanate particles perform as well as asbestos. New material for separators of nickel-hydrogen electrochemical cells offers performance similar to that of asbestos separator material without adverse health effects. In one version, separator contains pure polyethylene fibers, and may or may not contain supplementary latices as bonding agents. In standard wet-laying papermaking process, fibers pressed into mat, then dried. Mat used as is or pressed further in hot calender stack to soften and fuse fibers at crossing points. Treatment reduces porosity and increases resistance of mat to passage of air bubbles under pressure. In alternative version, matrix of 20 to 40 percent polyethylene fibers and 60 to 80 percent potassium titanate particles formed on paper machine, then dried. It, too, can be treated by hot calendering.

Scott, William E.↗
NASA NTRS2002

Causes of Long-Term Drought in the United States Great Plains

The United States Great Plains (USGP) experienced a number of multi-year droughts during the last century, most notably the droughts of the 1930s and 1950s. This study examines the causes of such droughts using ensembles of long term (1930-1999) simulations carried out with the NASA Seasonal-to-Interannual Prediction Project (NSIPP-1) atmospheric general circulation model (AGCM) forced with observed sea surface temperatures (SSTs). The results show that the model produces long-term (multi-year) variations in the USGP precipitation that are similar to those observed. A correlative analysis suggests that the ensemble mean low frequency (time scales longer than about 6 years) rainfall variations in the USGP are linked to a pan-Pacific pattern of SST variability that is the leading empirical orthogonal function (EOF) in the low frequency SST data. The link between the SST and the Great Plains precipitation is confirmed in idealized AGCM simulations, in which the model is forced by the 2 polarities of the pan-Pacific SST pattern. The idealized simulations further show that it is primarily the tropical part of the SST anomalies that influence the USGP. As such, the USGP tend to have above normal precipitation when the tropical Pacific SSTs are above normal, while there is a tendency for drought when the tropical SSTs are cold. The upper tropospheric response to the pan-Pacific SST EOF shows a global-scale pattern with a strong wave response in the Pacific and a substantial zonally-symmetric component in which USGP pluvial (drought) conditions are associated with reduced (enhanced) heights throughout the extra-tropics. The potential predictability of rainfall in the USGP associated with SSTs is rather modest, with on average about 1/3 of the total low frequency rainfall variance forced by SST anomalies. Further idealized experiments with climatological SST, suggest that the remaining low frequency variance in the USGP precipitation is the result of interactions with soil moisture. In particular, simulations with soil moisture feedback show a six-fold increase in the variance in annual USGP precipitation compared with simulations in which the soil feedback is excluded. In addition to increasing variance, the interactions with the soil introduce year-to-year memory in the hydrological cycle that is consistent with a red noise process, in which the low frequencies in the deep soil are the result of integrating a net forcing (precipitation-evaporation-runoff) that is white noise on interannual time scales. As such, the role of low frequency SST variability is to introduce a bias to the net forcing on the soil moisture that drives the random process preferentially to either wet or dry conditions.

Schubert, Siegfried D.↗
NASA NTRS2003

Causes of Long-Term Drought in the United States Great Plains

This study examines the causes of long term droughts in the United States Great Plains (USGP). The focus is on the relative roles of slowly varying SSTs and interactions with soil moisture. The results from ensembles of long term (1930-1999) simulations carried out with the NASA Seasonal-to- Interannual Prediction Project (NSIPP-1) atmospheric general circulation model (AGCM) show that the SSTs account for about 1/3 of the total low frequency rainfall variance in the USGP. Results from idealized experiments with climatological SST suggest that the remaining low frequency variance in the USGP precipitation is the result of interactions with soil moisture. In particular, simulations with soil moisture feedback show a five-fold increase in the variance in annual USGP precipitation compared with simulations in which the soil feedback is excluded. In addition to increasing variance, the interactions with the soil introduce year-to-year memory in the hydrological cycle that is consistent with a red noise process, in which the deep soil is forced by white noise and damped with a time scale of about 2 years. As such, the role of low frequency SST variability is to introduce a bias to the net forcing on the soil moisture that drives the random process preferentially to either wet or dry conditions.

Schubert, Siegfried D.↗
NASA NTRS1993

Stable isotopic biogeochemistry of carbon and nitrogen in a perennially ice-covered Antarctic lake

Lake Hoare (77 degrees 38' S, 162 degrees 53' E) is an amictic, oligotrophic, 34-m-deep, closed-basin lake in Taylor Valley, Antarctica. Its perennial ice cover minimizes wind-generated currents and reduces light penetration, as well as restricts sediment deposition into the lake and the exchange of atmospheric gases between the water column and the atmosphere. The biological community of Lake Hoare consists solely of microorganisms -- both planktonic populations and benthic microbial mats. Lake Hoare is one of several perennially ice-covered lakes in the McMurdo Dry Valleys that represent the end-member conditions of cold desert and saline lakes. The dry valley lakes provide a unique opportunity to examine lacustrine processes that operate at all latitudes, but under an extreme set of environmental conditions. The dry valley lakes may also offer a valuable record of catchment and global changes in the past and present. Furthermore, these lakes are modern-day equivalents of periglacial lakes that are likely to have been common during periods of glacial maxima at temperate latitudes. We have analyzed the dissolved inorganic carbon (DIC) of Lake Hoare for delta 13C and the organic matter of the sediments and sediment-trap material for delta 13C and delta 15N. The delta 13C of the DIC indicates that 12C is differentially removed in the shallow, oxic portions of the lake via photosynthesis. In the anoxic portions of the lake (27-34 m) a net addition of 12C to the DIC pool occurs via organic matter decomposition. The dissolution of CaCO3 at depth also contributes to the DIC pool. Except near the Canada Glacier where a substantial amount of allochthonous organic matter enters the lake, the organic carbon being deposited on the lake bottom at different sites is isotopically similar, suggesting an autochthonous source for the organic carbon. Preliminary inorganic carbon flux calculations suggest that a high percentage of the organic carbon fixed in the water column is remineralized as it falls through the water column. At nearby Lake Fryxell, the substantial (relative to Lake Hoare) glacial meltstream input overprints Fryxell's shallow-water biological delta 13C signal with delta 13C-depleted DIC. In contrast, Lake Hoare is not significantly affected by surface-water input and mixing, and therefore the delta 13C patterns observed arise primarily from biological dynamics within the lake. Organic matter in Lake Hoare is depleted in 15N, which we suggest is partially the result of the addition of relatively light inorganic nitrogen into the lake system from terrestrial sources.

NASA Program Exobiology↗
NASA NTRS1994

Resin impregnation process for producing a resin-fiber composite

Process for vacuum impregnation of a dry fiber reinforcement with a curable resin to produce a resin-fiber composite, by drawing a vacuum to permit flow of curable liquid resin into and through a fiber reinforcement to impregnate same and curing the resin-impregnated fiber reinforcement at a sufficient temperature and pressure to effect final curing. Both vacuum and positive pressure, e.g. autoclave pressure, are applied to the dry fiber reinforcement prior to application of heat and prior to any resin flow to compact the dry fiber reinforcement, and produce a resin-fiber composite of reduced weight, thickness and resin content, and improved mechanical properties. Preferably both a vacuum and positive pressure, e.g. autoclave pressure, are also applied during final curing.

Palmer, Raymond J.↗
NASA NTRS1996

Coating Silicon-Based Ceramics With Durable Mullite

Improved plasma-spraying process deposits mullite on silicon carbide substrates. Prevents formation of amorphous mullite by maintaining high temperature of sprayed deposite to allow crystallization to occur. Deposited mullite adheres to substrate and exhibits little or no cracking during thermal cycling. Provides substantially greater resistance to oxidation in dry air and corrosion by molten salt. Process expected useful in depositing mullite on substrates made of other silicon-based ceramics and other ceramic substrates having coefficients of thermal expansion similar to those of mullite.

Miller, Robert A.↗
NASA NTRS1999

Effects of Microgravity on the Formation of Aerogels

This paper describes research to investigate fundamental aspects of the effects of microgravity on the formation of the microstructure of metal oxide alcogels and aerogels. We are studying the role of gravity on pore structure and gel uniformity in collaboration with Marshall Space Flight Center (MSFC) on gelling systems under microgravity conditions. While this project was just initiated in May 1998, related research performed earlier is described along with the plans and rationale for the current microgravity investigation to provide background and describe newly developing techniques that should be useful for the current gellation studies. The role of gravity in materials processing must be investigated through the study of well-mastered systems. Sol-gel processed materials are near-perfect candidates to determine the effect of gravity on the formation and growth of random clusters from hierarchies of aggregated units. The processes of hydrolysis, condensation, aggregation and gellation in the formation of alcogels are affected by gravity and therefore provide a rich system to study under microgravity conditions. Supercritical drying of the otherwise unstable wet alcogel preserves the alcogel structure produced during sol-gel processing as aerogel. Supercritically dried aerogel provides for the study of material microstructures without interference from the effects of surface tension, evaporation, and solvent flow. Aerogels are microstructured, low density open-pore solids. They have many unusual properties including: transparency, excellent thermal resistance, high surface area, very low refractive index, a dielectric constant approaching that of air, and extremely low sound velocity. Aerogels are synthesized using sol-gel processing followed by supercritical solvent extraction that leaves the original gel structure virtually intact. These studies will elucidate the effects of microgravity on the homogeneity of the microstructure and porosity of aerogel. The presence of poorly controlled microporosity in aerogel leads to material non-uniformity that gives rise to increased light scattering. Investigation of the effect of gravity driven solute flows within microclusters and their effect on condensation and agglomeration reactions will enable us to improve the preparation and properties of aerogel. Increased clarity of images viewed through aerogel and decreased scattering from the pores of aerogel will significantly improve the prospects for large-scale adoption of aerogel in such applications as transparent insulating windows, high performance thermal insulation, and Cherenkov detectors.

Hunt, A. J.↗
DOE OSTI2023

ADVANCED TECHNIQUES FOR ENERGY INPUT REDUCTION IN GYPSUM WALLBOARD DRYING

Gypsum has been used for thousands of years in building and construction applications, starting with the pyramids in ancient Egypt, to “Plaster of Paris” in the midcenturies, and to the now-ubiquitous drywall in modern-day houses. Production of gypsum drywall boards takes several steps with high energy and water consumption. The current state of the art in industry is a process that begins by mining gypsum and reducing its particle size by milling. These gypsum particles undergo calcination to convert the gypsum (calcium sulfate dihydrate) into stucco (calcium sulfate hemihydrate). The stucco is mixed with additives and enough water to form a slurry that can be poured onto a conveyor belt and molded into the desired geometry. The stucco reacts with the water, converting back into gypsum. The remaining water is then dried from the board to form the final product. While only ~20 wt. % of water is needed for the conversion of stucco to gypsum, significant excess water is needed to ensure sufficient fluidity of the slurry for processibility. This is due to the low quality of the stucco particles produced in high throughput calcination units, which disintegrate upon mixing with water, thereby reducing the fluidity and processability of the slurry. This project aims to produce high-quality stucco particles by dielectric calcination. In doing so, particle integrity can be maintained through the slurry formulation step, and particle size distribution of the stucco can be adjusted to increase fluidity with less excess water. With less water remaining unreacted in the board, significant energy can be saved in drying the product. The project aims to 1) develop a dielectric calcination method to TRL 3, 2) determine optimal and practical particle size distributions to minimize excess water in the slurry, and 3) reduce the energy consumption of the drying process.

Conforti, Kameron↗