Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “Direct detection”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRSDate not supplied

NASA's Low-Cost Optical Terminal (LCOT) Free-Space Optical Subsystem (FSOS): Concept, Design, Build, & Test

We present the status of ongoing work at NASA’s Goddard Space Flight Center (GSFC) to build a prototype, low-cost-of-production, flexibly-configured ground terminal for space optical communication. For laser telecommunication to be cost effective for future missions, a wide-spread global network of operationally responsive optical terminals should be established. There has been a decades-old need for a single modular open systems approach (MOSA) ground terminal architecture capable of supporting multiple space missions ranging from LEO to Lunar distances with 2-way laser communications. At the heart of LCOT’s design concept is the Free-Space Optical Subsystem (FSOS). The major subassemblies of LCOT/FSOS that address most optical common configurations are : (1) Single 700mm F/12 Nasmyth folded Rx R-C Telescope, (2) Four independent 150mm diameter high-power all-reflective Tx beam directors (XOA), (3) Non-coherent direct detection Rx bench on starboard side of telescope (SOB), and (4) Coherent (possibly Quantum) optical communications bench on port side (POB). The Low-Cost Optical Terminal (LCOT) research and development (R&D) prototype is designed to be a generalized system that can be quickly field-reconfigured to support a wide variety of laser communications missions past, present, & future.

COTS↗
NASA NTRSDate not supplied

Second-generation Micro-Spec: Spectrometer Design for the Experiment for Cryogenic Large-Aperture Intensity Mapping

Micro-Spec (μ-Spec) is a direct-detection spectrometer that integrates all the components of a diffraction-grating spectrometer onto a ∼10-cm2 chip using superconducting microstrip transmission lines on a single-crystal silicon substrate. The second-generation μ-Spec has been designed to operate with a spectral resolution of ∼512 in the far-infrared and submillimeter (420–540 GHz, 714–555 μm) wavelength range, a band of interest for NASA’s EXperiment for Cryogenic Large-Aperture Intensity Mapping (EXCLAIM). EXCLAIM will be a high-altitude balloon mission that is being designed to map the emission of redshifted carbon monoxide and singly-ionized carbon lines over a redshift range 0 < z < 3.5. EXCLAIM will be the first demonstration of the μ-Spec technology in a space-like environment. This work reviews the status of the μ-Spec design for the EXCLAIM instrument, with emphasis on the spectrometer’s two-dimensional diffractive region, through which light of different wavelengths is focused on microwave kinetic inductance detectors (MKIDs) along the spectrometer focal plane. An optimization process generates a geometrical configuration of the diffractive region that satisfies specific requirements on size, operating spectral range and performance. An initial optical design optimized for EXCLAIM is presented in terms of geometric layout, spectral purity and efficiency.

Giuseppe Cataldo↗
NASA NTRS2021

Optial Experiments and Model Validation of Perturbed Starshade Designs

Starshades are a leading technology to enable the direct detection and spectroscopic characterization of Earth- like exoplanets. Critical starshade technologies are currently being advanced through the S5 Project and at the Princeton starshade testbed. We report on the status of Milestone 2 of the S5 Project, optical model validation. We present results from optical experiments of starshades with intentional perturbations built into their design. These perturbations are representative of the type of perturbations possible in a flight design and serve as points of validation for dffraction models and error budgets. We show experimental results for two perturbed shapes, a mask with all petals shifted radially outward by 5 um and a mask with shallow sine waves built into two petals. We compare these data to outputs of the optical model and demonstrate better than 25% agreement. We also present images taken in crossed polarized light and use those data to constrain physical parameters of the optical edge. Bringing in previously obtained results for other perturbed shapes, we show an agreement between experiment and model of better than 25% and argue that this satisfies the Milestone 2 criteria.

Galvin, Michael↗
NASA NTRS2023

The JWST Early-Release Science Program for Direct Observations of Exoplanetary Systems II: A 1 to 20 μM Spectrum of the Planetary-Mass Companion VHS 1256–1257 B

We present the highest fidelity spectrum to date of a planetary-mass object. VHS 1256 b is a <20 M Jup widely separated (∼8'', a = 150 au), young, planetary-mass companion that shares photometric colors and spectroscopic features with the directly imaged exoplanets HR 8799c, d, and e. As an L-to-T transition object, VHS 1256 b exists along the region of the color–magnitude diagram where substellar atmospheres transition from cloudy to clear. We observed VHS 1256 b with JWST's NIRSpec IFU and MIRI MRS modes for coverage from 1 to 20 μm at resolutions of ∼1000–3700. Water, methane, carbon monoxide, carbon dioxide, sodium, and potassium are observed in several portions of the JWST spectrum based on comparisons from template brown dwarf spectra, molecular opacities, and atmospheric models. The spectral shape of VHS 1256 b is influenced by disequilibrium chemistry and clouds. We directly detect silicate clouds, the first such detection reported for a planetary-mass companion.

Brown dwarfs↗
NASA NTRSDate not supplied

Picometer-level metrology of test articles on the road to Habitable Worlds Observatory

The Habitable Worlds Observatory will revolutionize our understanding of the universe by directly detecting biosignatures on extrasolar planets and allow us to answer the question if we are alone in the universe. To accomplish the tight science goals associated with this mission, the development of an ultrastable observatory with a coronagraphic instrument is necessary. The observatory itself may need to stay stable on the order of 10 picometers over a wavefront control cycle, orders of magnitude more stable than what is required on current space missions. The metrology to verify stability requirements must be roughly a factor of ten more stable. The ultrastable laboratory at NASA’s Goddard Space Flight Center has further stabilized its testbed to allow for dynamic measurements on diffuse and specular objects on the order of single picometers, and we are currently measuring drifts on the orders of tens of picometers over different temporal bands. This paper will discuss the mechanical updates to the testbed setup, the analysis performed on several test articles, and the path forward on the road to measuring achieving the required stability for Habitable Worlds Observatory.

Inteferometry↗
NASA NTRSDate not supplied

Spatial Mode-Diversity Optical Receivers for Free-Space Optical and Quantum Communications

We present an overview of spatial mode-diversity (SMD) receiver systems based on photonic lanterns for space-to-ground optical and quantum communications systems. Recent results are presented for direct-detection pulse-position modulated (PPM) and multi-Gbps coherent communications. We discuss designs for scalability in combination with integrated photonics.

Optical communications↗
NASA NTRS2024

Optimized bandpasses for the Habitable Worlds Observatory's exoEarth survey

A primary scientific goal of the future Habitable Worlds Observatory will be the direct detection and characterization of Earth-like planets. Estimates of the exoplanet yields for this concept will help guide mission design through detailed trade studies. It is therefore critical that yield estimation codes optimally adapt observations to the mission’s performance parameters to ensure accurate trade studies. To aid in this, we implement wavelength optimization in yield calculations for the first time, allowing the yield code to determine the ideal detection and characterization bandpasses. We use this capability to confirm the observational wavelength assumptions made for the large UV/Optical/IR surveyor, design B (LUVOIR-B) study, namely that the optimum detection wavelength is 500 nm for the majority of targets and the optimum wavelength to detect water is near 1000 nm, given LUVOIR-B’s assumed instrument performance parameters. We show that including the wavelength-dependent albedo of an Earth twin as a prior provides no significant benefit to the yields of exoEarth candidates and caution against tuning observations to modern Earth twins. We also show that coronagraphs whose inner working angles are similar to step functions may benefit from wavelength optimization and demonstrate how wavelength-dependent instrument performance can impact the optimum wavelengths for detection and characterization. The optimization methods we implement automate wavelength selection and remove uncertainties regarding these choices, helping to adapt the observations to the instrument’s performance parameters.

telescopes↗
NASA NTRSDate not supplied

Picometer-Level Metrology of Test Articles on the Road to Habitable Worlds Observatory

The Habitable Worlds Observatory will revolutionize our understanding of the universe by directly detecting biosignatures on extrasolar planets and allow us to answer the question if we are alone in the universe. To accomplish the tight science goals associated with this mission, the development of an ultrastable observatory with a coronagraphic instrument is necessary. The observatory itself may need to stay stable on the order of 10 picometers over a wavefront control cycle, orders of magnitude more stable than what is required on current space missions. The metrology to verify stability requirements must be roughly a factor of ten more stable. The ultrastable laboratory at NASA’s Goddard Space Flight Center has further stabilized its testbed to allow for dynamic measurements on diffuse and specular objects on the order of single picometers, and we are currently measuring drifts on the orders of tens of picometers over different temporal bands. This paper will discuss the mechanical updates to the testbed setup, the analysis performed on several test articles, and the path forward on the road to measuring achieving the required stability for Habitable Worlds Observatory.

Inteferometry↗
NASA NTRSDate not supplied

Picometer-Level Metrology on the Road to Habitable Worlds Observatory

The Habitable Worlds Observatory will revolutionize our understanding of the universe by directly detecting biosignatures on extrasolar planets and allow us to answer the question if we are alone in the universe. To accomplish the tight science goals associated with this mission, the development of an ultrastable observatory with a coronagraphic instrument is necessary. The observatory itself may need to stay stable on the order of 10 picometers over a wavefront control cycle, orders of magnitude more stable than what is required on current space missions. The metrology to verify stability requirements must be roughly a factor of ten more stable. The ultrastable laboratory at NASA’s Goddard Space Flight Center has further stabilized its testbed to allow for dynamic measurements on diffuse and specular objects on the order of single picometers, and we are currently measuring drifts on the orders of tens of picometers over different temporal bands. This paper will discuss the mechanical updates to the testbed setup, the analysis performed on several test articles, and the path forward on the road to measuring achieving the required stability for Habitable Worlds Observatory.

Inteferometry↗
NASA NTRSDate not supplied

Constraining Nanoflare Frequency Through Observations and Models

Nanoflares are considered prime candidates for heating the non-flaring solar corona. However, direct detection of individual nanoflares with present-generation instruments remains challenging. Understanding the frequency and magnitude of nanoflares is crucial for comprehending their role in coronal heating. In this study, we employ field-aligned hydrodynamic model to simulate the emission from a non-flaring X-ray bright point (XBP) observed by the Marshall Grazing Incidence X-ray Spectrometer (MaGIXS). The length and magnetic field strength of the coronal loops associated with this XBP are derived from magnetic field extrapolation of observed photospheric magnetograms by SDO/HMI. Each loop is assumed to be heated by random nanoflares, whose frequency and magnitude are determined by the loop length and their field strength. The simulation results are then compared and matched against the observation to determine the nanoflare heating frequency. We will discuss the findings of this study. Furthermore, we will discuss the evolution of nanoflare heating frequency during the formation and decay of an active region (AR) on the solar disk.

coronalheating↗
NASA NTRS1976

Remote measurements of ambient air pollutants with a bistatic laser system

The ambient air pollutants ozone, nitric oxide, and ethylene have been monitored in the Pasadena area with a bistatic IR laser apparatus. These pollutants were measured with a differential absorption technique, using selected wavelengths in the 9.5-, 5.2-, and 10.5-micron regions, respectively. The transmitted laser radiation was detected using both direct and heterodyne detection techniques. In the direct detection case, cube corner retroreflectors provided the return, and the heterodyne detection responded to scattered radiation from various rough surfaces, ranging from 400 m to 1.9 km in distance from the apparatus. Significant departures from ambient background concentration levels were noticed in the region near a local freeway during periods of moderate and heavy traffic.

Menzies, R. T.↗
NASA NTRS1987

Directional couplers for detecting the TE sub 11 and TE sub 12 circular waveguide modes

The theoretical and experimental results for a pair of mode-selective directional couplers designed to detect the TE sub 11 and TE sub 12 modes in a multimode circular wavelength are described. A brief description of the design of the couplers is presented, followed by a comparison of their measured and calculated parameters. The couplers were used to measure the characteristics of a circular waveguide mode converter. The results of these measurements are described.

Hoppe, D.↗
NASA NTRS1990

Directional Couplers For Detecting Circular Waveguide Modes

Samples of TE11 and TE12 modes coupled selectively out of circular waveguide. Report presents additional details of theory, construction, and measured operating characteristics of directional couplers described in "Microwave Transmitter With Multimode Output Section" (NPO-16826). Couplers consist of tapered rectangular-cross-section waveguides fastened lengthwise to outside of circular waveguide, with uniformly-lengthwise-spaced round coupling holes between each rectangular waveguide and circular waveguide.

Hoppe, Daniel J.↗
NASA NTRS1988

Systematic aspects of direct extrasolar planet detection

Using the first optical observatory in space, the Hubble Space Telescope, images of possible extrasolar planets will have poor contrast against the background of diffracted and scattered starlight. The very long exposure time required to achieve an adequate signal-to-noise ratio will make their detection infeasible. For a future telescope, a 16-fold increase in either the smoothness of the collecting area of the optics would reduce the exposure time to a tolerable value, but the contrast would remain low and the required photometric precision high. In this situation, the feasibility of detection would be contingent on the careful identification and control of systematic errors.

Brown, Robert A.↗
NASA NTRS2010

Exploring a Nearby Habitable World...Orbiting an M-Dwarf Star

Topics include: the landscape of extrasolar planets and detection techniques, direct and indirect detection methods, summary of the known exoplanets, exploiting transits to characterize super earth atmospheres, how to characterize exoplanet atmospheres, and emitted or reflected spectra of hot Jupiters.

Deming, Drake↗
NASA NTRS2000

Determination of anionic surfactants during wastewater recycling process by ion pair chromatography with suppressed conductivity detection

A direct approach utilizing ion pairing reversed-phase chromatography coupled with suppressed conductivity detection was developed to monitor biodegradation of anionic surfactants during wastewater recycling through hydroponic plant growth systems and fixed-film bioreactors. Samples of hydroponic nutrient solution and bioreactor effluent with high concentrations (up to 120 mS electrical conductance) of inorganic ions can be analyzed without pretreatment or interference. The presence of non-ionic surfactants did not significantly affect the analysis. Dynamic linear ranges for tested surfactants [Igepon TC-42, ammonium lauryl sulfate, sodium laureth sulfate and sodium alkyl (C10-C16) ether sulfate] were 2 to approximately 500, 1 to approximately 500, 2.5 to approximately 550 and 3.0 to approximately 630 microg/ml, respectively.

NASA Program Advanced Human Support Technology↗
NASA NTRS2012

Detection of Bi-Directionality in Strain-Gage Balance Calibration Data

An indicator variable was developed for both visualization and detection of bi-directionality in wind tunnel strain-gage balance calibration data. First, the calculation of the indicator variable is explained in detail. Then, a criterion is discussed that may be used to decide which gage outputs of a balance have bi- directional behavior. The result of this analysis could be used, for example, to justify the selection of certain absolute value or other even function terms in the regression model of gage outputs whenever the Iterative Method is chosen for the balance calibration data analysis. Calibration data of NASA s MK40 Task balance is analyzed to illustrate both the calculation of the indicator variable and the application of the proposed criterion. Finally, bi directionality characteristics of typical multi piece, hybrid, single piece, and semispan balances are determined and discussed.

Ulbrich, Norbert↗