SEARCH · Engineering Papers

Results for “Direct Numerical Simulations”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

SourceResearch connectionFrom yearThrough year

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26

All sources NASA NTRS DOE OSTI

NASA NTRS2022

A Dynamic Nonlinear Subgrid-Scale Model for Large-Eddy Simulation of Complex Turbulent Flows

We present a new dynamic nonlinear subgrid-scale (SGS) model for large-eddy simulations (LES) and apply it to compute a flow involving pressure gradients, surface curvature and separation, for which data from a direct numerical simulation are available for comparison. The model, inspired by the triple model idea of Bardina et al. (“Improved Turbulence Models Based on Large Eddy Simulation of Homogeneous, Incompressible, Turbulent Flows,” Report No. TF-19, Thermosciences Division, Department of Mechanical Engineering, Stanford University, 1983), includes a Galilean-invariant term called the modified Leonard stress tensor, and two nonlinear terms comprised of the products of the strain-rate and rotation-rate tensors for an improved representation of the subgrid-scale dissipation, backscatter and anisotropy effects. The model does not employ any ad hoc averaging or clipping procedures, and does not require the specification of a characteristic length scale; hence, it naturally avoids the ambiguities associated with defining a proper length scale for anisotropic grids. Results from the wall-resolved LES of flow past a Gaussian bump using the new model demonstrate improved prediction of skin-friction, flow separation, mean flow profiles and turbulent quantities when compared to implicit LES as well as explicit LES using the Vreman SGS model on the same grid.

Turbulence↗

DOE OSTI2023

Results of the Micromorphic Upscaling Workflow for the PSAAP III Year 3 Report

Predicting the mechanical response and failure of heterogeneous materials has proven difficult. Multiscale numerical methods based in higher order continuum theories attempt to bridge the gap between microscale and macroscale structural behavior. Micromorphic continuum theories have shown promise. The Tardigrade software package is an implementation of Eringen’s micromorphic continuum theory with capabilities to support multiscale material modeling workflows. These include homogenization through the Micromorphic Filter, calibration of micromorphic material models, and macroscale simulation in Tardigrade-MOOSE. This work discusses micromorphic upscaling efforts of the University of Colorado Boulder PSAAP III multidisciplinary simulation center (MSC). Verification studies are presented that compare the accuracy of the upscaling workflow with analytical solutions for a trivial stress state and homogeneous material using direct numerical simulations (DNS) conducted in the Ratel finite element method (FEM) and GEOS material point method (MPM) codes. These verification studies consider upscaling using the Micromorphic Filter for a “single filter domain”. Finally, DNS of a heterogeneous composite material is upscaled using a “multiple filter domain” method.

36 MATERIALS SCIENCE↗

DOE OSTI2022

Non-Boussinesq subgrid-scale model with dynamic tensorial coefficients

A major drawback of Boussinesq-type subgrid-scale stress models used in large-eddy simulations is the inherent assumption of alignment between large-scale strain rates and filtered subgrid-stresses. A priori analyses using direct numerical simulation (DNS) data have shown that this assumption is invalid locally as subgrid-scale stresses are poorly correlated with the large-scale strain rates [J. Bardina, J. Ferziger, and W. Reynolds, Improved subgrid-scale models for large-eddy simulation, in Proceedings of the 13th Fluid and Plasmadynamics Conference, AIAA (1980); C. Meneveau and K. Katz, Scale-invariance and turbulence models for large-eddy simulation, Ann. Rev. Fluid Mech. 32, 1 (2000)]. In the present work, a new, non-Boussinesq subgrid-scale model is presented where the model coefficients are computed dynamically. Some previous non-Boussinesq models have observed issues in providing adequate dissipation of turbulent kinetic energy [e.g., Bardina et al., Proceedings of the 13th Fluid and Plasmadynamics Conference (1980); R. A. Clark, J. Ferziger, and W.C. Reynolds. Evaluation of subgrid-scale models using an accurately simulated turbulent flow, J. Fluid Mech. 91, 1 (1979); S. Stolz and N. A. Adams, An approximate deconvolution procedure for large-eddy simulation, Phys. Fluids 11, 1699 (1999)]; however, the present model is shown to provide sufficient dissipation using dynamic coefficients. Modeled subgrid-scale Reynolds stresses satisfy the consistency requirements of the governing equations for large-eddy simulation (LES), vanish in laminar flow and at solid boundaries, and have the correct asymptotic behavior in the near-wall region of a turbulent boundary layer. The new model, referred to as the dynamic tensor-coefficient Smagorinsky model (DTCSM), has been tested in simulations of canonical flows: decaying and forced homogeneous isotropic turbulence, and wall-modeled turbulent channel flow at high Reynolds numbers. The results show favorable agreement with DNS data. It has been shown that DTCSM offers similar predictive capabilities as the dynamic Smagorinsky model for canonical flows. In order to assess the performance of DTCSM in more complex flows, wall-modeled simulations of high Reynolds number flow over a Gaussian bump (Boeing speed bump) exhibiting smooth-body flow separation are performed. Predictions of surface pressure and skin friction, compared against DNS and experimental data, show improved accuracy from DTCSM in comparison to existing static coefficient (Vreman) and dynamic Smagorinsky model. The computational cost of performing LES with this model is up to 15% higher than the dynamic Smagorinsky model.

42 ENGINEERING↗

DOE OSTI2021

Cloud droplet diffusional growth in homogeneous isotropic turbulence: bin microphysics versus Lagrangian super-droplet simulations

The increase in the spectral width of an initially monodisperse population of cloud droplets in homogeneous isotropic turbulence is investigated by applying a finite-difference fluid flow model combined with either Eulerian bin microphysics or a Lagrangian particle-based scheme. The turbulence is forced applying a variant of the so-called linear forcing method that maintains the mean turbulent kinetic energy (TKE) and the TKE partitioning between velocity components. The latter is important for maintaining the quasi-steady forcing of the supersaturation fluctuations that drive the increase in the spectral width. We apply a large computational domain (64 3 m 3 ), one of the domains considered in Thomas et al. (2020). The simulations apply 1 m grid length and are in the spirit of the implicit large eddy simulation (ILES), that is, with small-scale dissipation provided by the model numerics. This is in contrast to the scaled-up direct numerical simulation (DNS) applied in Thomas et al. (2020). Two TKE intensities and three different droplet concentrations are considered. Analytic solutions derived in Sardina et al. (2015), valid for the case when the turbulence integral timescale is much larger than the droplet phase relaxation timescale, are used to guide the comparison between the two microphysics simulation techniques. The Lagrangian approach reproduces the scalings relatively well. Representing the spectral width increase in time is more challenging for the bin microphysics because appropriately high resolution in the bin space is needed. The bin width of 0.5 µm is only sufficient for the lowest droplet concentration (26 cm -3 ). For the highest droplet concentration (650 cm -3 ), an order of magnitude smaller bin size is barely sufficient. The scalings are not expected to be valid for the lowest droplet concentration and the high-TKE case, and the two microphysics schemes represent similar departures. Finally, because the fluid flow is the same for all simulations featuring either low or high TKE, one can compare point-by-point simulation results. Such a comparison shows very close temperature and water vapor point-by-point values across the computational domain and larger differences between simulated mean droplet radii and spectral width. The latter are explained by fundamental differences in the two simulation methodologies, numerical diffusion in the Eulerian bin approach and a relatively small number of Lagrangian particles that are used in the particle-based microphysics.

54 ENVIRONMENTAL SCIENCES↗

NASA NTRS1994

Nonlinear evolution of a large-amplitude circularly polarized Alfven wave: High beta

The nonlinear dynamics following saturation of the parametric instabilities of a monochromatic field-aligned large-amplitude circularly polarized Alfven wave is investigated via direct numerical simulation in the case of high plasma beta and no wave dispersion. The magnetohydrodynamic (MHD) code permits nonlinear couplings in the parallel direction to the ambient magnetic field and one perpendicular direction. Compressibility is included in the form of a polytropic equation of state. Turbulent cascades develop after saturation of two coupled oblique three-wave parametric instabilities; one of which is an oblique filamentationlike instability reported earlier. Remnants of the parametric processes, as well as of the original Alfven pump wave, persist during late nonlinear times. Nearly incompressible MHD features such as spectral anisotropies appear as well.

Ghosh, S.↗

DOE OSTI2022

A Dynamic Pore Network Model for Imbibition Simulation Considering Corner Film Flow

Wetting films can develop in the corners of angular pores under strong wetting conditions. Modeling the dynamics of corner film remains elusive using direct numerical simulations because of the significant scale difference between main meniscus and corner film flow. In this paper, the modified interacting capillary bundle model (ICB), developed in our previous work to describe accurately corner film dynamics in a single square tube, is incorporated into a single-pressure dynamic pore network model (DPNM) to simulate imbibition in strongly wetting porous media with corner film flow. The traditional pore network is decomposed into several layers of interacting subpore networks where the 0th layer of subpore network simulates the main meniscus flow and higher layers the corner film flow. The fluid flow between different layers is captured by interlayer throats. In addition, the snap-off mechanism caused by the thickening of wetting corner film is considered. The accuracy of the developed model is validated for four cases: spontaneous imbibition in a single square tube, wetting fluid redistribution through corner films under a capillary pressure difference, snap off in a narrow throat connecting two large pores, and imbibition dynamics in a real microfluidic porous geometry. The validated model is then used to simulate both spontaneous and controlled imbibition in a pore network with random pore size distribution. Finally, the interaction between corner film and main meniscus flow in porous media is analyzed from a pore-scale perspective.

58 GEOSCIENCES↗

NASA NTRS1990

Direct simulations of wall-bounded compressible turbulence

A study has been initiated on the effects of compressibility (Mach number) on turbulent boundary layers. An understanding of both qualitative (turbulence structures, physical processes) and quantitative (turbulence statistics) effects are desired. This understanding should lead to better turbulence models for applications involving supersonic wall-bounded flows. Direct numerical simulations of an idealized problem will be used to accomplish these objectives. Among several possibilities we chose plane Couette flow with constant-temperature walls as the first problem to be studied. The lack of mean streamwise pressure gradient plus isothermal walls implies that both horizontal directions can be assumed to be homogeneous and that the flow can reach a statistically steady state. Together, these features greatly simplify the calculations and analyses of the results. To date, an algorithm has been developed and implemented (but not yet fully tested) for the accurate solution of the Navier-Stokes equations with the assumptions noted above.

Buell, J. C.↗

DOE OSTI2021

Multi-fidelity modeling to predict the rheological properties of fiber suspensions

Unveiling the rheological properties of fiber suspensions is of paramount interest to many industrial applications like biofuel production. The 3D numerical simulations of the suspension of fibers are often computationally expensive and time-consuming. Machine learning methods such as neural networks can simplify the prediction of rheological behavior; however, they require a relatively large training data set. Multi -fidelity models, which combine high-fidelity data from numerical simulations and less expensive lower fidelity data from resources such as simplified physical equations, can lead to optimized predictions. Here, we focus on a neural network with two levels of fidelity, i.e., high and low fidelity networks. To produce high-fidelity data, we perform direct numerical simulations to model the fibers as one-dimensional inextensible slender bodies that obey the Euler- Bernoulli beam equation. The Navier-Stokes equations govern the suspended fluid, and an immersed boundary method is used to couple the fluid and solid motion. The low-fidelity data is produced by using constitutive equations. Noticeable improvements have been observed in the accuracy of predicting the rheological behavior when a multi-fidelity network is used compared to the single-fidelity network.

Boodaghidizaji, Miad↗

NASA NTRS1990

Numerical investigation of laminar-turbulent transition in a flat plate wake

Lamina-turbulent transition of high-deficit flat plate wakes is investigated by direct numerical simulations using the complete Navier Stokes equations. The simulations are based on a spatial model so that both the base flow and the disturbance flow can develop in the downstream direction. The Navier Stokes equations are used in a vorticity-velocity form and are solved using a combination of finite difference and spectral approximations. Fourier series are used in the spanwise direction. Second-order finite-differences are used to approximate the spatial derivatives in the streamwise and transverse directions. For the temporal discretion, a combination of ADI, Crank-Nicolson, and Adams-Bashforth methods is employed. The discretized velocity equations are solved using fast Helmholtz solvers. Code validation is accomplished by comparison of the numerical results to both linear stability and to experiments. Calculations of two- and/or three-dimensional sinuous and mode disturbances in the wake of flat plate are undertaken. For calculations of two-dimensional disturbances, the wake is forced at an amplitude level so that nonlinear disturbance development may be observed. In addition, the forcing amplitude is varied in order to determine its effect on the disturbance behavior. To investigate the onset of three-dimensionality, the wake is forced with a small-amplitude three-dimensional disturbance and a larger amplitude two-dimensional disturbance. The two-dimensional forcing amplitude is varied in order to determine its influence on the three-dimensional flow field.

Fasel, Hermann F.↗

NASA NTRS1993

Numerical Simulation of a High Mach Number Jet Flow

The recent efforts to develop accurate numerical schemes for transition and turbulent flows are motivated, among other factors, by the need for accurate prediction of flow noise. The success of developing high speed civil transport plane (HSCT) is contingent upon our understanding and suppression of the jet exhaust noise. The radiated sound can be directly obtained by solving the full (time-dependent) compressible Navier-Stokes equations. However, this requires computational storage that is beyond currently available machines. This difficulty can be overcome by limiting the solution domain to the near field where the jet is nonlinear and then use acoustic analogy (e.g., Lighthill) to relate the far-field noise to the near-field sources. The later requires obtaining the time-dependent flow field. The other difficulty in aeroacoustics computations is that at high Reynolds numbers the turbulent flow has a large range of scales. Direct numerical simulations (DNS) cannot obtain all the scales of motion at high Reynolds number of technological interest. However, it is believed that the large scale structure is more efficient than the small-scale structure in radiating noise. Thus, one can model the small scales and calculate the acoustically active scales. The large scale structure in the noise-producing initial region of the jet can be viewed as a wavelike nature, the net radiated sound is the net cancellation after integration over space. As such, aeroacoustics computations are highly sensitive to errors in computing the sound sources. It is therefore essential to use a high-order numerical scheme to predict the flow field. The present paper presents the first step in a ongoing effort to predict jet noise. The emphasis here is in accurate prediction of the unsteady flow field. We solve the full time-dependent Navier-Stokes equations by a high order finite difference method. Time accurate spatial simulations of both plane and axisymmetric jet are presented. Jet Mach numbers of 1.5 and 2.1 are considered. Reynolds number in the simulations was about a million. Our numerical model is based on the 2-4 scheme by Gottlieb & Turkel. Bayliss et al. applied the 2-4 scheme in boundary layer computations. This scheme was also used by Ragab and Sheen to study the nonlinear development of supersonic instability waves in a mixing layer. In this study, we present two dimensional direct simulation results for both plane and axisymmetric jets. These results are compared with linear theory predictions. These computations were made for near nozzle exit region and velocity in spanwise/azimuthal direction was assumed to be zero.

Hayder, M. Ehtesham↗

DOE OSTI2024

A second-order-in-time, explicit approach addressing the redundancy in the low-Mach, variable-density Navier-Stokes equations

A novel algorithm for explicit temporal discretization of the variable-density, low-Mach Navier-Stokes equations is presented here in this study. Recognizing there is a redundancy between the mass conservation equation, the equation of state, and the transport equation(s) for the scalar(s) which characterize the thermochemical state, and that it destabilizes explicit methods, we demonstrate how to analytically eliminate the redundancy and propose an iterative scheme to solve the resulting transformed scalar equations. The method obtains second-order accuracy in time regardless of the number of iterations, so one can terminate this subproblem once stability is achieved. Hence, flows with larger density ratios can be simulated while still retaining the efficiency, low cost, and parallelizability of an explicit scheme. The temporal discretization algorithm is used within a pseudospectral direct numerical simulation which extends the method of Kim, Moin, and Moser for incompressible flow to the variable-density, low-Mach setting, where we demonstrate stability for density ratios up to ~25.7.

97 MATHEMATICS AND COMPUTING↗

DOE OSTI2020

Deep learning-based model for progress variable dissipation rate in turbulent premixed flames

A deep neural network (DNN) based large eddy simulation (LES) model for progress variable dissipation rate in turbulent premixed flames is presented. The DNN model is trained using filtered data from direct numerical simulations (DNS) of statistically planar turbulent premixed flames with n-heptane as fuel. Training data was comprised of flames with varying turbulence levels leading to a range of Karlovitz numbers. Through a-priori tests the DNN model is shown to predict the subfilter contribution to progress variable dissipation rate accurately over a range of filter widths and for all Karlovitz numbers examined in this study. Superior performance of the DNN model relative to an established physics-based model is also demonstrated. Additionally, transferability of the DNN model is highlighted by a-priori evaluation of the model using filtered DNS data from multiple cases with different Karlovitz numbers and fuel species than those that were used for training the model.

33 ADVANCED PROPULSION SYSTEMS↗

DOE OSTI2021

Application of Scalar Filtered Density Function to Turbulent Flows Under Supercritical Condition

Abstract The scalar filtered density function (FDF) methodology is extended and employed for large eddy simulation (LES) of turbulent flows under supercritical condition. To describe real fluid behavior, the extended methodology incorporates the generalized heat and mass diffusion models along with real fluid thermodynamic relations which are derived using the cubic Peng–Robinson equation of state. These models are implemented within the stochastic differential equations comprising the scalar FDF transport. Simulations are conducted of a temporally developing mixing layer under supercritical condition and the results are assessed by comparing with data generated by direct numerical simulation (DNS) of the same layer. The consistency of the proposed FDF methodology is assessed. The LES-FDF predictions are shown to agree favorably with the DNS data and exhibit several key features pertaining to supercritical turbulent flows.

Energy & Fuels↗

NASA NTRS1993

Higher-order accurate Osher schemes with application to compressible boundary layer stability

Two fourth order accurate Osher schemes are presented which maintain higher order accuracy on nonuniform grids. They use either a conservative finite difference or finite volume discretization. Both methods are successfully used for direct numerical simulations of flat plate boundary layer instability at different Mach numbers. Results of growth rates of Tollmien-Schlichting waves compare well with direct simulations of incompressible flow and for compressible flow with results obtained by solving the parabolic stability equations.

Van Der Vegt, J. J. W.↗

NASA NTRS1993

Higher-order accurate Osher schemes with application to compressible boundary layer stability

Vandervegt, J. J. W.↗

DOE OSTI2024

Heat release surrogates for NH 3 /H 2 /N 2 –air premixed flames

The present study investigates the performance of NH, NH 2 , O-atom, and H-atom as heat release rate (HRR) surrogates for NH 3 /H 2 /N 2 –air premixed flame through simulations. The simulations are conducted across different pressures, reactant inlet temperatures, fuel blend compositions, and equivalence ratios. Cantera is used to simulate one-dimensional (1D) freely propagating flames to investigate the spatial correlations of the species with the HRR. PeleLMeX, a low-Mach direct numerical simulation (DNS) code with Adaptive Mesh Refinement (AMR), is used to simulate two-dimensional (2D) flame-vortex interactions to investigate the temporal correlations including stretch effects. Three different mechanisms (Jiang et al. 2020; Glarborg et al. 2018; Okafor et al. 2018) were considered in the 1D flame simulations, whereas only the Jiang mechanism was considered in the flame-vortex simulations. The HRR surrogate performance for the 2D flames is evaluated at two different locations: (1) the centerline and (2) the flame cusp. The cusp is defined as the region in the flame front with the greatest curvature and the centerline encounters the highest tangential strain rate. The 1D flame results suggest that, although there is not uniformly good spatial correlation for HRR across all flame conditions, NH is the best overall as a HRR surrogate for laminar flames. The 2D flame results, however, suggest that O-atom and H-atom have satisfactory temporal correlations at different conditions—the former for rich flames, the latter for high-pressure flames. Furthermore, these simulations provide guidance to experimental measurements of surrogate HRR markers in unsteady multi-dimensional flames using laser diagnostics to detect species such as NH, O-atom, and H-atom.

Ammonia↗

NASA NTRS1996

A priori testing of subgrid-scale models for the velocity-pressure and vorticity-velocity formulations

Subgrid-scale models for Large Eddy Simulation (LES) in both the velocity-pressure and the vorticity-velocity formulations were evaluated and compared in a priori tests using spectral Direct Numerical Simulation (DNS) databases of isotropic turbulence: 128(exp 3) DNS of forced turbulence (Re(sub(lambda))=95.8) filtered, using the sharp cutoff filter, to both 32(exp 3) and 16(exp 3) synthetic LES fields; 512(exp 3) DNS of decaying turbulence (Re(sub(Lambda))=63.5) filtered to both 64(exp 3) and 32(exp 3) LES fields. Gaussian and top-hat filters were also used with the 128(exp 3) database. Different LES models were evaluated for each formulation: eddy-viscosity models, hyper eddy-viscosity models, mixed models, and scale-similarity models. Correlations between exact versus modeled subgrid-scale quantities were measured at three levels: tensor (traceless), vector (solenoidal 'force'), and scalar (dissipation) levels, and for both cases of uniform and variable coefficient(s). Different choices for the 1/T scaling appearing in the eddy-viscosity were also evaluated. It was found that the models for the vorticity-velocity formulation produce higher correlations with the filtered DNS data than their counterpart in the velocity-pressure formulation. It was also found that the hyper eddy-viscosity model performs better than the eddy viscosity model, in both formulations.

Winckelmans, G. S.↗

NASA NTRS1991

Numerical simulations of turbulent thermal convection with differential rotation

The solar nebula, from which the planets in our solar system formed, featured a disk of gas and dust grains in rapid, differential rotation, and at some stage was likely to have been unstable to thermal convection. This situation is suspected by many to lead to significant turbulent Reynolds stress production and angular momentum transport in such systems, and estimates of transport rates have been attempted from unsubstantiated phenomenological models. In order to determine the circumstances and physical conditions under which our own planetary system formed and to explain recent observations of young stellar systems, it is necessary to develop realistic models of heat and angular momentum transport for such flows. Developing an understanding of complicated flows featuring thermal convection, rotation, and shear is also of wide interest in stellar astrophysics and in planetary and terrestrial atmospheric studies. The ultimate objective is to develop workable models based on the numerical simulations for constructing global solar nebula models; viz., relatively simple prescriptions for heat and angular momentum fluxes from given system parameters (e.g., ratios of rotation, shear, and convective lapse rates) are characterized, quantified, and developed. Toward this end, our program has been to attempt to understand the behavior of the direct numerical simulations of Boussinesq convection, which, despite the complexity of the results, is still an overly simplified approximation to the real system and should be more amenable to analysis. These results are also intended to be tested against turbulence models, especially those designed for atmospheric boundary layers, and may provide a basis for subgrid-scale models. In order to make the numerical simulations more realistic with regard to the solar nebula problem, a fully compressible code that will allow incorporation of large density stratifications and realistic thermodynamic and radiative properties is developed. In order to explore the properties of these flows at the very high values of Re found in natural systems and the very low values of Pr found in most astrophysical contexts, we will need to employ large-eddy simulations for which we want to determine the most appropriate subgrid-scale model to incorporate.

Cabot, William H.↗