Engineering Papers⌕ Search

SEARCH · Engineering Papers

Results for “DRAG EFFECT”

Search indexed NASA NTRS and DOE OSTI research on propulsion, heat transfer, battery materials and energy systems. Follow report and document links to the original sources.

Quote a phrase for an exact phrase match. Source license links do not imply unrestricted reuse.

At least 469 records · Page 26
All sourcesNASA NTRSDOE OSTI
NASA NTRS1955

Preliminary Results of an Investigation at Transonic Speeds to Determine the Effects of a Heated Propulsive Jet on the Drag Characteristics of a Related Series of Afterbodies

Preliminary results are presented from an investigation to determine the influence of afterbody geometry on the effects of a sonic propulsive jet at transonic speeds. The results presented are base pressure coefficient and afterbody pressure-drag coefficient as a function of jet pressure ratio for different values of Mach number and jet temperature. Geometric parameters investigated include boattail angle, jet-to-model diameter ratio, and jet-to-base diameter ratio.

Henry, Beverly Z , Jr↗
NASA NTRS1988

Determination of the area and mass distribution of orbital debris fragments

An important factor in modeling the orbital debris environment is the loss rate of debris due to atmospheric drag and lunisolar perturbations. An accurate knowledge of the area-to-mass ratio of debris fragments is required to calculate the effects of atmospheric drag. It is shown here that the orbital elements as a function of time can be used to invert any propagation algorithm to yield the area-to-mass ratio of an orbiting object. From these calculations and the observed radar cross-section of the object, the mass can be calculated to an accuracy of about 30 percent. It is shown that the mass is related to the effective cross-section area by a power-law relation, but for a given area the mass distribution is very broad. An expression is given for the cumulative mass distribution.

Badhwar, G. D.↗
NASA NTRS1944

The Effects of a Highly Cambered Low-Drag Wing and of Auxiliary Flaps on the High-Speed Aerodynamic Characteristics of a Twin-Engine Pursuit Airplane Model

Results are presented for tests of two wings, an NACA 230-series wing and a highly-cambered NACA 66-series wing on a twin-engine pursuit airplane. Auxiliary control flaps were tested in combinations with each wing. Data showing comparison of high-speed aerodynamic characteristics of the model when equipped with each wing, the effect of the auxiliary control flaps on aerodynamic characteristics, and elevator effectiveness for the model with the 66-series wing are presented. High-speed aerodynamic characteristics of the model were improved with the 66-series wing.

AIRFOILS - NACA 66,2-416-66,2-616 - CHAR & MOMENTS↗
NASA NTRSDate not supplied

Decision Aid for Conjunction Risk Mitigation by Differential Drag

The NASA Conjunction Assessment Risk Analysis (CARA) team has conducted are view of the historical record of high-risk conjunctions involving CARA-protected missions and evaluated whether (and how much) differential drag can provide effective mitigation. From this analysis, CARA has identified a rule of thumb: missions with perigees below 560 km capable of tripling their drag area for 72 hours(or a larger scale factor for a lesser amount of time) can reliably use differential drag to remediate high-risk events.

mission design↗
NASA NTRS1986

Yaw and spin effects on high intensity sound generation and on drag of training projectiles with ring cavities

Projectiles containing axisymmetric ring cavities constitute aeroacoustic sources. These produce high intensity tones which are used for coding in the SAWE (Simulation of Area Weapons Effects) system. Experimental data obtained in a free jet facility are presented describing the effects of yaw, spin and geometric projectile parameters on sound pressure and drag. In general, the sound pressure decreases with increasing yaw angle whereas the drag increases. Spin tends to increase sound pressure levels because of a reduction in asymmetry of flow. Drag increases at zero yaw approximately as the 1.5 power of sound wavelength. A significant part of the drag increase appears to be due to energy loss by sound radiation.

Parthasarathy, S. P.↗
NASA NTRS1952

On the design of airfoils in which the transition of the boundary layer is delayed

A method is presented for designing suitable thickness distributions and mean camber lines for airfoils permitting extensive chordwise laminar flow. Wind tunnel and flight tests confirming the existence of laminar flow; possible maintenance of laminar flow by area suction; and the effects of wind tunnel turbulence and surface roughness on the promotion of premature boundary layer transition are discussed. In addition, estimates of profile drag and scale effect on maximum lift of the derived airfoils are made.

BOUNDARY LAYER CONTROL - AIRFOILS↗
NASA NTRS1986

A Constitutive Model for the Inelastic Multiaxial Cyclic Response of a Nickel Base Superalloy Rene 80

The objective was to develop unified constitutive equations which can model a variety of nonlinear material phenomena observed in Rene 80 at elevated temperatures. A constitutive model was developed based on back stress and drag stress. The tensorial back stress was used to model directional effects; whereas, the scalar drag stress was used to model isotropic effects and cyclic hardening or softening. A flow equation and evolution equations for the state variables were developed in multiaxial form. Procedures were developed to generate the material parameters. The model predicted very well the monotonic tensile, cyclic, creep, and stress relaxation behavior of Rene 80 at 982 C. The model was then extended to 871, 760, and 538 C. It was shown that strain rate dependent behavior at high temperatures and strain rate independent behavior at the lower temperatures could be predicted very well. A large number of monotonic tensile, creep, stress relation, and cyclic experiments were predicted. The multiaxial capabilities of the model were verified extensively for combined tension/torsion experiments. The prediction of the model agreed very well for proportional, nonproportional, and pure shear cyclic loading conditions at 982 and 871 C.

Ramaswamy, V. G.↗
NASA NTRS1975

Drag of the complete configuration aerodynamic considerations, 2

A number of drag items are related to the performance of a complete aircraft configuration. First, the effect of fuselage camber, wing and nacelle incidence are discussed from a viewpoint of design decision making. Second, the effect of overall cruise drag on the design gross and empty weight of the airplane is discussed. Examples show that cruise drag can have a very important influence on total airplane weight. Third, the effects of usable cruise lift-to-drag ratio and wing loading are shown to be important. Finally several research needs relating to design of the complete configuration are reviewed.

Roskam, J.↗
DOE OSTI2020

Electron-phonon drag enhancement of transport properties from a fully coupled ab initio Boltzmann formalism

We present a combined treatment of the nonequilibrium dynamics and transport of electrons and phonons by carrying out ab initio calculations of the fully coupled electron and phonon Boltzmann transport equations. We find that the presence of mutual drag between the two carriers causes the thermopower to be enhanced and dominated by the transport of phonons, rather than electrons as in the traditional semiconductor picture. Drag also strongly boosts the intrinsic electron mobility, thermal conductivity and the Lorenz number. Impurity scattering is seen to suppress the drag enhancement of the thermal and electrical conductivities, while having weak effects on the enhancement of the Lorenz number and thermopower. We demonstrate these effects in n-doped 3C-SiC at room temperature, and explain their origins. This work establishes the roles of microscopic scattering mechanisms in the emergence of strong drag effects in the transport of the interacting electron-phonon gas.

75 CONDENSED MATTER PHYSICS, SUPERCONDUCTIVITY AND↗
NASA NTRS2015

Acoustic Liner Drag: A Parametric Study of Conventional Configurations

Interest in the characterization of the aerodynamic drag performance of acoustic liners has increased in the past several years. This paper details experiments in NASA Langley's Grazing Flow Impedance Tube to quantify the relative drag of several conventional perforate-over-honeycomb liner configurations. For a fixed porosity, facesheet hole diameter and cavity depth are varied to study the effect of each. These configurations are selected to span the range of conventional liner geometries used in commercial aircraft engines. Detailed static pressure and acoustic measurements are made for grazing flows up to M=0.5 at 140 dB SPL for tones between 400 and 2800 Hz. These measurements are used to calculate a resistance factor (λ) for each configuration. Analysis shows a correlation between perforate hole size and the resistance factor but cavity depth seems to have little influence. Acoustic effects on liner drag are observed to be limited to the lower Mach numbers included in this investigation.

Howerton, Brian M.↗
NASA NTRS1991

Effects of turbulence and number density on the drag coefficient of droplets

Droplet drag coefficients for polydispersed drops are determined via the behavior of drops decelerating on the stagnation streamline of a cylinder with an afterbody mounted in a wind tunnel test section. A variety of velocity, turbulence levels, and droplet number densities were studied. A force balance equation technique was used to determine drag coefficient. For the levels of number density, up to 700/cc, and turbulence, up to about 7 percent, no definite effects were seen. However, the smallest drops in the high turbulence case showed some evidence of drop-turbulence and/or drop-drop interactions. The drag results that were developed for this set of measurements agreed well with other empirical relations previously determined.

Rudoff, R. C.↗
NASA NTRS1954

Theoretical and experimental investigation of additive drag

The significance of additive drag is discussed and equations for determining its approximate value are derived for annular and open-nose inlets. Charts are presented giving values of additive drag coefficient over a range of free-stream Mach numbers for open and for annular-nose inlets with conical flow at the inlet. The effects on additive drag of variable inlet-total-pressure recovery and static pressures on the centerbody are investigated and an analytical method of predicting the variation of pressure on the centerbody with mass-flow ratio is given. Experimental additive-drag values are presented for a series of 20 degree and 25 degree cone half-angle inlets and one open-nose inlet operating at free-stream Mach numbers of 1.8 and 1.6. A comparison with the theoretical values of additive drag shows excellent agreement for the open-nose inlet and moderately good agreement for the annular inlets. (author)

Sibulkin, Merwin↗
NASA NTRS1981

RSRA vertical drag test report

The Rotor Systems Research Aircraft (RSRA), because of its ability to measure rotor loads, was used to conduct an experiment to determine vertical drag, tail rotor blockage, and thrust augmentation as affected by ground clearance and flight velocity. The RSRA was flown in the helicopter configuration at speeds from 0 to 15 knots for wheel heights from 5 to 150 feet, and to 60 knots out of ground effect. The vertical drag trends in hover, predicted by theory and shown in model tests, were generally confirmed. The OGE hover vertical drag is 4.0 percent, 1.1 percent greater than predicted. The vertical drag decreases rapidly as wheel height is reduced, and is zero at a wheel height of 6 feet. The vertical drag also decreases with forward speed, approaching zero at sixty knots. The test data show the effect of wheel height and forward speed on thrust, gross weight capability, and power, and provide the relationships for power and collective pitch at constant gross weight required for the simulation of helicopter takeoffs and landings.

Flemming, R. J.↗
NASA NTRS1983

Ion wind drag reduction

In order to study the effect of ion wind on viscous drag, the equations of electrogasdynamics are solved numerically assuming the flow is incompressible, the electric field is steady and that the fluid velocity is negligible compared to ion drift velocity. The results obtained to date in a continuing theoretical and experimental research program are presented.

Malik, M. R.↗
NASA NTRS1982

Effect of Propeller on Engine Cooling System Drag and Performance

The pressure recovery of incoming cooling air and the drag associated with engine cooling of a typical general aviation twin-engine aircraft was Investigated experimentally. The semispan model was mounted vertically in the 40 x 80-Foot Wind Tunnel at Ames Research Center. The propeller was driven by an electric motor to provide thrust with low vibration levels for the cold-now configuration. It was found that the propeller slip-stream reduces the frontal air spillage around the blunt nacelle shape. Consequently, this slip-stream effect promotes flow reattachment at the rear section of the engine nacelle and improves inlet pressure recovery. These effects are most pronounced at high angles of attack; that is, climb condition. For the cruise condition those improvements were more moderate.

Katz, Joseph↗
NASA NTRS1951

Effect of Tail Surfaces on the Base Drag of a Body of Revolution at Mach Numbers of 1.5 and 2.0

Wind-tunnel tests were performed at Mach numbers of 1.5 and 2.0 to investigate the influence of tail surfaces on the base drag of a body of revolution without boattailing and having a turbulent boundary layer. The tail surfaces were of rectangular plan form of aspect ratio 2.33 and has symmetrical, circular-arc airfoil section. The results of the investigation showed that the addition of these tail surfaces with the trailing edges at or near the body base incurred a large increase in the base-drag coefficient. For a cruciform tail having a 10-percent-thick airfoil section, this increase was about 70 percent at a Mach number of 1.5 and 35 percent at a Mach number of 2.0. As the trailing edge of the tail was moved forward or rearward of the base by about one tail-chord length, the base-drag increment was reduced to nearly zero. The increments in base-drag coefficient due to the presence of 10-percent-thick tail surfaces were generally twice those for 5-percent-thick surfaces. The base-drag increments due to the presence of a cruciform tail were less than twice those for a plane tail. An estimate of the change in base pressure due to the tail surfaces was made, based on a simple superposition of the airfoil-pressure field onto the base-pressure field behind the body. A comparison of the results with the experimental values indicated that in most cases the trend in the variation of the base-drag increment with changes in tail position could be predicted by this approximate method but that the quantitative agreement at most tail locations was poor.

BOUNDARY LAYER - BODIES OF REVOLUTION↗